Application of dandelion-like Sm2O3/Co3O4/rGO in high performance supercapacitors

Novel 2D material-based supercapacitors are promising candidates for energy applications due to their distinctive physical, chemical, and electrochemical properties. In this study, a dandelion-like structure material comprised of Sm2O3, Co3O4, and 2D reduced graphene oxide (rGO) on nickel foam (NF) was synthesised using a hydrothermal method followed by subsequent annealing treatment. This dandelion composite grows further through the tremella-like structure of Sm2O3 and Co3O4, which facilitates the diffusion of ions and prevents structural collapse during charging and discharging. A substantial number of active sites are generated during redox reactions by the unique surface morphology of the Sm2O3/Co3O4/rGO/NF composite (SCGN). The maximum specific capacity the SCGN material achieves is 3448 F g-1 for 1 A g-1 in a 6 mol L-1 KOH solution. Benefiting from its morphological structure, the prepared composite (SCGN) exhibits a high cyclability of 93.2% over 3000 charge-discharge cycles at 10 A g-1 and a coulombic efficiency of 97.4%. Additionally, the assembled SCGN//SCGN symmetric supercapacitors deliver a high energy density of 64 W h kg-1 with a power density of 300 W kg-1, which increases to an outstanding power density of 12 000 W kg-1 at 28.7 W h kg-1 and long cycle stability (80.9% capacitance retention after 30 000 cycles). These results suggest that the manufactured SCGN electrodes could be viable active electrode materials for electrochemical supercapacitors.

Niobium-Based Oxides Toward Advanced Electrochemical Energy Storage: Recent Advances and Challenges

Niobium-based oxides including Nb₂ O₅ , TiNb_x O_2+2.5x compounds, M-Nb-O (M = Cr, Ga, Fe, Zr, Mg, etc.) family, etc., as the unique structural merit (e.g., quasi-2D network for Li-ion incorporation, open and stable Wadsley- Roth shear crystal structure), are of great interest for applications in energy storage systems such as Li/Na-ion batteries and hybrid supercapacitors. Most of these Nb-based oxides show high operating voltage (>1.0 V vs Li⁺ /Li) that can suppress the formation of solid electrolyte interface film and lithium dendrites, ensuring the safety of working batteries. Outstanding rate capability is impressive, which can be derived from their fast intercalation pseudocapacitive kinetics. However, the intrinsic poor electrical conductivity hinders their energy storage applications. Various strategies including structure optimization, surface engineering, and carbon modification are effectively used to overcome the issues. This review provides a comprehensive summary on the latest progress of Nb-based oxides for advanced electrochemical energy storage applications. Major impactful work is outlined, promising research directions, and various performance-optimizing strategies, as well as the energy storage mechanisms investigated by combining theoretical calculations and various electrochemical characterization techniques. In addition, challenges and perspectives for future research and commercial applications are also presented.

Magnéli Phase Titanium Oxide as a Novel Anode Material for Potassium-Ion Batteries

Recently, K-ion batteries (KIBs) have attracted attention for potential applications in next-generation energy storage devices principally on the account of their abundancy and lower cost. Herein, for the first time, we report an anatase TiO₂-derived Magnéli phase Ti₆O₁₁ as a novel anode material for KIBs. We incorporate pristine carbon nanotube (CNT) on the TiO₂ host materials due to the low electronic conductivity of the host materials. TiO₂ transformed to Magnéli phase Ti₆O₁₁ after the first insertion/deinsertion of K ions. From the second cycle, Magnéli phase Ti₆O₁₁/CNT composite showed reversible charge/discharge profiles with ∼150 mA h g^-1 at 0.05 A g^-1. Ex situ X-ray diffraction and transmission electron microscopy analyses revealed that the charge storage process of Magnéli phase Ti₆O₁₁ proceeded via the conversion reaction during potassium ion insertion/deinsertion. The Magnéli phase Ti₆O₁₁/CNT composite electrode showed long-term cycling life over 500 cycles at 200 mA g^-1, exhibiting a capacity retention of 76% and a high Coulombic efficiency of 99.9%. These salient results presented here provide a novel understanding of the K-ion storage mechanisms in the extensively investigated oxide-based material for Li-ion batteries and Na-ion batteries, shedding light on the development of promising electrode materials for next-generation batteries.