Porous Flower-Like Nanoarchitectures Derived from Nickel Phosphide Nanocrystals Anchored on Amorphous Vanadium Phosphate Nanosheet Nanohybrids for Superior Overall Water Splitting

Transition metal phosphides (TMPs) and phosphates (TM-Pis) nanostructures are promising functional materials for energy storage and conversion. Nonetheless, controllable synthesis of crystalline/amorphous heterogeneous TMPs/TM-Pis nanohybrids or related nanoarchitectures remains challenging, and their electrocatalytic applications toward overall water splitting (OWS) are not fully explored. Herein, the Ni2P nanocrystals anchored on amorphous V-Pi nanosheet based porous flower-like nanohybrid architectures that are self-supported on carbon cloth (CC) substrate (Ni2P/V-Pi/CC) are fabricated by conformal oxidation and phosphorization of pre-synthesized NiV-LDH/CC. Due to the unique microstructures and strong synergistic effects of crystalline Ni2P and amorphous V-Pi components, the obtained Ni2P/V-Pi/CC owns abundant active sites, suitable surface/interface electronic structure and optimized adsorption-desorption of reaction intermediates, resulting in outstanding electrocatalytic performances toward hydrogen and oxygen evolution reactions in alkaline media. Correspondingly, the assembled Ni2P/V-Pi/CC||Ni2P/V-Pi/CC electrolyzer only needs an ultralow cell voltage (1.44 V) to deliver 10 mA cm-2 water-splitting currents, exceeding its counterparts, recently reported bifunctional catalysts-based devices, and Pt/C/CC||IrO2/CC pairs. Moreover, the Ni2P/V-Pi/CC||Ni2P/V-Pi/CC manifests remarkable stability. Also, such device shows a certain prospect for OWS in acidic media. This work may spur the development of TMPs/TMPis-based nanohybrid architectures by combining structure and phase engineering, and push their applications in OWS or other clean energy options.

Ammonia-assisted Ni particle preferential deposition in Ni-Fe pyrophosphates on iron foam to improve the catalytic performance for overall water splitting

Designing efficient and cost-effective electrocatalysts for overall water splitting remains a major challenge in hydrogen production. Herein, ammonia was introduced to pyrophosphate chelating solution assisted Ni particles preferential plating on porous Fe substrate to form coral-like Ni/NiFe-Pyro electrode. The pyrophosphate with multiple complex sites can couple with nickel and iron ions to form an integrated network structure, which also consists of metallic nickel due to the introduction of ammonia. The large network structure in Ni/NiFe-Pyro significantly enhances the synergistic effect between nickel and iron and then improves the electrocatalytic performance. As a result, the coral-like Ni/NiFe-Pyro@IF exhibits good electrocatalytic activity and stability for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The electrolyzer assembled with Ni/NiFe-Pyro@IF as cathode and anode just needs a low water-splitting voltage of 1.54 V to obtain the current density of 10 mA cm-2. Meanwhile, the stability test of Ni/NiFe-Pyro@IF is performed at the current densities ranging from 10 to 400 mA cm-2 for 50 h without any significant decay, indicating robust catalytic stability for overall water splitting. This strategy for synthesizing metal/metal pyrophosphate composites may provide a new avenue for future studies of efficient bifunctional electrocatalysts.

Atomic layer deposition for tuning the surface chemical composition of nickel iron phosphates for oxygen evolution reaction in alkaline electrolyzers

Transition metal phosphates are promising catalysts for the oxygen evolution reaction (OER) in alkaline medium. Herein, Fe-doped Ni phosphates are deposited using plasma-enhanced atomic layer deposition (PE-ALD) at 300 °C. A sequence offFe phosphate PE-ALD cycles andnNi phosphate PE-ALD cycles is repeatedxtimes. The Fe to Ni ratio can be controlled by the cycle ratio (f/n), while the film thickness can be controlled by the number of cycles (xtimes (n+f)). 30 nm films with an Fe/Ni ratio of ∼10% and ∼37%, respectively, are evaluated in 1.0 M KOH solution. Remarkably, a significant difference in OER activity is found when the order of the Ni and Fe phosphate PE-ALD cycles in the deposition sequence is reversed. A 20%-45% larger current density is obtained for catalysts grown with an Fe phosphate PE-ALD cycle at the end compared to the Ni phosphate-terminated flavour. We attribute this to a higher concentration of Fe centers on the surface, as a consequence of the specific PE-ALD approach. Secondly, increasing the thickness of the catalyst films up to 160 nm results in an increase of the OER current density and active surface area, suggesting that the as-deposited smooth and continuous films are converted into electrolyte-permeable structures during catalyst activation and operation. This work demonstrates the ability of PE-ALD to control both the surface and bulk composition of thin film electrocatalysts, offering valuable opportunities to understand their impact on performance.

Facile synthesis of FeNi alloy-supported N-doped Mo2C hollow nanospheres for the oxygen evolution reaction

The rapid depletion of fossil fuels results in significant environmental pollution. Consequently, researching environmentally friendly and cost-effective electrocatalysts with exceptional oxygen evolution reaction (OER) capabilities holds immense importance in enhancing the efficient utilization of resources. In this paper, a straightforward and cost-effective method was employed to produce Fe-Ni alloy-supported N-doped carbon hollow nanospheres (FeNi/Mo2C/NC) using self-assembled molybdenum dopamine spheres (Mo-PDA-HS) as a substrate. The inclusion of iron and nickel addressed the issue of aggregation and collapse in Mo-PDA-HS nanostructures at high temperatures, while adjusting the electronic structure of the composites to achieve efficient OER activity. The composite displayed a low overpotential (η10 mA = 304 mV) and a minimal Tafel slope (41.8 mV/dec-1). This study introduces a simple strategy for constructing structurally robust and non-aggregating Mo2C nanostructures, along with a direct method for designing cost-effective and high-performance catalysts for OER.

A Membrane-Free Decoupled Water Electrolyzer Operating at Simulated Fluctuating Renewables with Tri-Functional NiCo-P Electrode

Water electrolysis has been considered a promising technology for the conversion of renewables to hydrogen. However, preventing mixing of products (H2 and O2 ) and exploring cost-efficient electrolysis components remains challenging for conventional water electrolyzers. Herein, we designed a membrane-free decoupled water electrolysis system by using graphite felt supported nickel-cobalt phosphate (GF@Nix Coy -P) material as a tri-functional (redox mediator, hydrogen evolution reaction (HER), oxygen evolution reaction (OER)) electrode. The versatile GF@Ni1 Co1 -P electrode obtained by a one-step electrodeposition not only exhibits high specific capacity (176 mAh g-1 at 0.5 A g-1 ) and long cycle life (80 % capacity retention after 3000 cycles) as a redox mediator, but also has relatively outstanding catalytic activities for HER and OER. The excellent properties of the GF@Nix Coy -P electrode endow this decoupled system with more flexibility for H2 production by fluctuating renewable energies. This work provides guidance for multifunctional applications of transition metal compounds between energy storage and electrocatalysis.

Surface Adsorption of Amorphous Phosphate on RuNi-Doped Molybdate for the Hydrogen Evolution Reaction

Developing highly active and cost-effective electrocatalysts is critical for enhancing the intrinsic performance of electrocatalytic water splitting. Oxoanion-based compounds, such as phosphates and molybdates, have emerged as promising electrocatalysts owing to their advantageous properties of nontoxicity, low price, and strong water adsorption ability. However, their relatively inferior activity has impeded extensive investigation into electrochemical applications. Herein, an amorphous phosphate-adsorbed and RuNi-doped molybdate (RuNiMo-P) composite is synthesized on nickel foam (NF) support by using a simple two-step method. Significantly, an acidic solution of phosphomolybdic acid (PMo12), containing a low concentration of Ru, can etch the NF, contributing to the in situ growth of the RuNi-doped molybdate precursor. Subsequent phosphating ensures the surface formation of the amorphous phosphate layer due to abundant oxygen in the precursor. The strong structural interaction between RuNi-doped molybdate and amorphous phosphate in RuNiMo-P prompts an enhanced hydrogen evolution reaction (HER) performance, delivering an overpotential of 38 mV at a current density of -10 mA cm-2, a Tafel slope of 53 mV dec-1, and good stability in an alkaline medium. Characterizations after HER reveal that RuNi doping, partial dissolution of phosphate and molybdate species, and newly formed NiOOH nanosheets can expose active sites, facilitate charge transfer, and modify electronic structures, thereby improving the HER performance effectively.

Boosting Li-O2 Battery Performance via Coupling of P-N Site-Rich N, P Co-Doped Graphene-Like Carbon Nanosheets with Nano-CePO4

Development of efficient and robust cathode catalysts is critical for the commercialization of Li-O₂ batteries (LOBs). Herein, a well-designed CePO₄ @N-P-CNSs cathode catalyst for LOBs via coupling P-N site-rich N, P co-doped graphene-like carbon nanosheets (N-P-CNSs) with nano-CePO₄ via a novel "in situ derivation" coupling strategy by in situ transforming the P atoms of P-C sites in N-P-CNSs to CePO₄ is reported. The CePO₄ @N-P-CNSs exhibit superior bifunctional ORR/OER activity relative to commercial Pt/C-RuO₂ with an overall overpotential of 0.64 V (vs RHE). Moreover, the LOB with CePO₄ @N-P-CNSs as the cathode catalyst delivers a low charge overpotential of 0.67 V (vs Li/Li⁺ ), high discharge capacity of 29774 mAh g^-1 at 100 mA g^-1 and long cycling stability of 415 cycles, respectively. The remarkably enhanced LOB performance is attributable to the in situ derived CePO₄ nanoparticles and the P-N sites in N-P-CNSs, which facilitate increased bifunctional ORR/OER activity, promote the rapid and effective decomposition of Li₂ O₂ and inhibit the formation of Li₂ CO₃ . This work may provide new inspiration for designing efficient, durable, and cost-effective cathode catalysts for LOBs.

In Situ Surface Restructuring of Amorphous Ni-Doped CoMo Phosphate-Based Three-Dimensional Networked Nanosheets: Highly Efficient and Durable Electrocatalyst for Overall Alkaline Water Splitting

Developing cost-efficient bifunctional electrocatalysts with high efficiency and durability for the production of green hydrogen and oxygen is a demanding and challenging research area. Due to their high earth abundance, transition metal-based electrocatalysts are alternatives to noble metal-based water splitting electrocatalysts. Herein, binder-free three-dimensional (3D) networked nanosheets of Ni-doped CoMo ternary phosphate (Pi) were prepared using a facile electrochemical synthetic strategy on flexible carbon cloth without any high-temperature heat treatment or complicated electrode fabrication. The optimized CoMoNiPi electrocatalyst delivers admirable hydrogen (η₁₀ = 96 mV) and oxygen (η₁₀ = 272 mV) evolution performances in 1.0 M KOH electrolyte. For overall water splitting in a two-electrode system, the present catalyst demands only 1.59 and 1.90 V to reach current densities of 10 and 100 mA/cm², respectively, which is lower than that of the Pt/C||RuO₂ couple (1.61 V @ 10 mA/cm², 2 V > @ 100 mA/cm²) and many other catalysts reported previously. Furthermore, the present catalyst delivers excellent long-term stability in a two-electrode system continuously over 100 h at a high current density of 100 mA/cm², exhibiting nearly 100% faradic efficiency. The unique 3D amorphous structure with high porosity, a high active surface area, and lower charge transfer resistance provides excellent overall water splitting. Notably, the amorphous structure of the present catalyst favors the in situ surface reconstruction during electrolysis and generates very stable surface-active sites capable of long-term performance. The present work provides a route for the preparation of multimetallic-Pi nanostructures for various electrode applications that are easy to prepare and have superior activity, high stability, and low cost.

A Review of Nonaqueous Electrolytes, Binders, and Separators for Lithium-Ion Batteries

Lithium-ion batteries (LIBs) are the most important electrochemical energy storage devices due to their high energy density, long cycle life, and low cost. During the past decades, many review papers outlining the advantages of state-of-the-art LIBs have been published, and extensive efforts have been devoted to improving their specific energy density and cycle life performance. These papers are primarily focused on the design and development of various advanced cathode and anode electrode materials, with less attention given to the other important components of the battery. The “nonelectroconductive” components are of equal importance to electrode active materials and can significantly affect the performance of LIBs. They could directly impact the capacity, safety, charging time, and cycle life of batteries and thus affect their commercial application. This review summarizes the recent progress in the development of nonaqueous electrolytes, binders, and separators for LIBs and discusses their impact on the battery performance. In addition, the challenges and perspectives for future development of LIBs are discussed, and new avenues for state-of-the-art LIBs to reach their full potential for a wide range of practical applications are outlined.

Graphic Abstract

Cobalt-Doped Iron Phosphate Crystal on Stainless Steel Mesh for Corrosion-Resistant Oxygen Evolution Catalyst

We report an oxygen evolution reaction (OER) catalyst prepared by the incorporation of cobalt-doped iron phosphate on stainless steel mesh (SSM) through a one-step hydrothermal method. Compared to the catalytic property of bare SSM, our OER catalyst (0.84-CoFePi) showed a 42% improvement in current density at the potential of 1.9 V vs. RHE, and the onset potential was decreased by 26.5 mV. Furthermore, the loss in current density of bulk electrolysis after 12 h in 1 M KOH (pH 14) solution and 0.0441 wt% H2SO4 (pH ≈ 3) containing 0.1 M NaCl solution was negligible (3.1% and 3.2%, respectively). Moreover, our cobalt-doped iron phosphate on SSM exhibits the dramatic improvement in corrosion resistance to a basic, mild acidic solution and chloride ions compared to bare SSM.

Diffusion-Mediated Morphological Transformation in Bifunctional Mn2O3/CuO-(VO)3(PO4)2·6H2O for Enhanced Electrochemical Water Splitting

A strategical approach for morphological transformation and heterojunction formation was utilized to suppress the shortcomings of uni-metal oxide electrocatalysts and enhance their bifunctionality. In situ generation of copper oxide (CuO) over the surface of manganese oxide (Mn₂O₃) resulted in a morphological transformation from solid spheres to hollow spherical structures due to the ion-exchange diffusion (Kirkendall effect) of Cu ions into Mn₂O₃ particles. This hollowness resulted in the advancement of the bifunctional electrocatalytic behavior of Mn₂O₃/CuO (overpotential (η₁₀) of 280 mV for an OER and 310 mV for an HER at a current density of 10 mA/cm²) by virtue of increased exposed surface active sites aiding the adsorption of water molecules on the surface. The increased electrochemical active surface area (ECSA/C_dl = 34 mF/cm²) and reduced charge transfer resistance resulted in the formation of Mn₂O₃/CuO hollow spheres to achieve an approximately threefold enhancement in the turnover frequency (TOF) compared to the bare Mn₂O₃. The electrocatalytic efficiency of Mn₂O₃/CuO was further enhanced by virtue of the faster charge transfer coefficient of two-dimensional (2D) vanadyl phosphate hexahydrate (VOP) sheets deposited over its surface. This boosted the overall water splitting with attained overpotential (η₁₀) values of 190 and 220 mV with Tafel slopes of 60 and 105 mV/decade for an OER and HER, respectively. The morphological transformation and formation of an n-p heterojunction between Mn₂O₃ and CuO based on their work function (φ) values evaluated from the density functional theory (DFT) calculation and the effect of the VOP overlayer for faster reaction kinetics at the electrolyte interface resulted in an ∼10-fold increment in TOF values compared to the bare counterpart.

Nanocrystalline Iron Pyrophosphate-Regulated Amorphous Phosphate Overlayer for Enhancing Solar Water Oxidation

A rational regulation of the solar water splitting reaction pathway by adjusting the surface composition and phase structure of catalysts is a substantial approach to ameliorate the sluggish reaction kinetics and improve the energy conversion efficiency. In this study, we demonstrate a nanocrystalline iron pyrophosphate (Fe₄(P₂O₇)₃, FePy)-regulated hybrid overlayer with amorphous iron phosphate (FePO₄, FePi) on the surface of metal oxide nanostructure with boosted photoelectrochemical (PEC) water oxidation. By manipulating the facile electrochemical surface treatment followed by the phosphating process, nanocrystalline FePy is localized in the FePi amorphous overlayer to form a heterogeneous hybrid structure. The FePy-regulated hybrid overlayer (FePy@FePi) results in significantly enhanced PEC performance with long-term durability. Compared with the homogeneous FePi amorphous overlayer, FePy@FePi can improve the charge transfer efficiency more significantly, from 60% of FePi to 79% of FePy@FePi. Our density-functional theory calculations reveal that the coexistence of FePi and FePy phases on the surface of metal oxide results in much better oxygen evolution reaction kinetics, where the FePi was found to have a typical down-hill reaction for the conversion from OH* to O₂, while FePy has a low free energy for the formation of OH*.

Djurleite Copper Sulfide-Coupled Cobalt Sulfide Interface for a Stable and Efficient Electrocatalyst

Transition metal sulfides (TMS) exhibit proliferated edge sites, facile electrode kinetics, and improved intrinsic electrical conductivity, which demand low potential requirements for total water splitting application. Here, we have propounded copper sulfide-coupled cobalt sulfide nanosheets grown on 3D nickel as an electrocatalyst for hydrogen (HER) and oxygen evolution (OER) reactions. The formation of djurleite copper sulfide with a Cu vacancy enables faster H⁺ ion transport and shows improved HER activity with a remarkably lower overpotential of 164 mV at 10 mA/cm², whereas cobalt-incorporated copper sulfide undergoes cation exchange during synthesis and shows elevated OER activity with a lower overpotential of 240 mV at 10 mA/cm² for the OER. Moreover, Cu_2-xS/Co is said to have a hybrid CoS-CoS₂ interface and provide Co²⁺ active sites on the surface and enable the fast adsorption of intermediate species (OH*, O*, and OOH*), which lowers the potential requirement. The copper vacancy and cation exchange with a hybrid CoS-CoS₂ structure are helpful in supplying more surface reactive species and faster ion transport for the HER and OER, respectively. The full-cell electrolyzer requires a very low potential of 1.58 V to attain a current density of 10 mA/cm², and it shows excellent stability for 50 h at 100 mA/cm² as confirmed by the chronopotentiometry test.

Cobalt and iron phosphates with modulated compositions and phases as efficient electrocatalysts for alkaline seawater oxidation

An electrocatalyst which is suitable for use in both fresh water and real seawater electrolysis is very uncommon. In this work, we have developed a series of iron-tuned cobalt phosphates and cobalt-tuned iron phosphate solid solutions as electrocatalysts exhibiting excellent OER activities not only in freshwater but also in alkaline real seawater with a faradaic efficiency of 95%.

Amorphous CoV phosphate nanosheets as efficient oxygen evolution electrocatalyst

Oxygen evolution reaction (OER) is crucial for hydrogen production. However, OER with four-electron transfer requires electrocatalysts to speed up its sluggish kinetics in alkaline solutions. Herein, amorphous CoV phosphate (denoted as CoV-Pi) nanosheets synthesized by a straightforward one-step hydrothermal approach is reported, which provide a low overpotential of 320 mV at 10 mA cm-2 , a small Tafel slope down to 48.8 mV dec-1 and long-term durability over 80 h. The efficient activity is ascribed to the amorphous nanosheets structure, high electrochemically active surface area, enhanced surface wettability and the synergistic effect of the active metal atoms. This study significantly indicates that CoV-Pi is a promising alternative to replace expensive noble metal-based catalysts for electrochemical water splitting.

Iron Phosphide Precatalyst for Electrocatalytic Degradation of Rhodamine B Dye and Removal of Escherichia coli from Simulated Wastewater

Electrocatalysis using low-cost materials is a promising, economical strategy for remediation of water contaminated with organic chemicals and microorganisms. Here, we report the use of iron phosphide (Fe2P) precatalyst for electrocatalytic water oxidation; degradation of a representative aromatic hydrocarbon, the dye rhodamine B (RhB); and inactivation of Escherichia coli (E. coli) bacteria. It was found that during anodic oxidation, the Fe2P phase was converted to iron phosphate phase (Fe2P-iron phosphate). This is the first report that Fe2P precatalyst can efficiently catalyze electrooxidation of an organic molecule and inactivate microorganisms in aqueous media. Using a thin film of Fe2P precatalyst, we achieved 98% RhB degradation efficiency and 100% E. coli inactivation under an applied bias of 2.0 V vs. reversible hydrogen electrode in the presence of in situ generated reactive chlorine species. Recycling test revealed that Fe2P precatalyst exhibits excellent activity and reproducibility during degradation of RhB. High-performance liquid chromatography with UV-Vis detection further confirmed the electrocatalytic (EC) degradation of the dye. Finally, in tests using Lepidium sativum L., EC-treated RhB solutions showed significantly diminished phytotoxicity when compared to untreated RhB. These findings suggest that Fe2P-iron phosphate electrocatalyst could be an effective water remediation agent.

Two-Phase Synthesis of Fe Doped Cerium Phosphate Ultra-fine Nanocrystals for Efficient Oxygen Evolution

It is very important and challenging to develop electrocatalysts with high performance and economic benefits. In this work, ultra-fine Fe doped CePO4 nanocrystals (Fe-CePO4) were prepared by a simple two-step...

Expansion of multifunctionality in off-stoichiometric manganite using post-annealing and high pressure: physical and electrochemical studies

Prospects for the use of manganites in various areas of modern technologies require comprehensive studies of their physical and chemical properties. La0.9Mn1.1O3 (LMO) ceramics have been synthesized at annealing temperature...

Phosphorus doping and phosphates coating for nickel molybdate/nickel molybdate hydrate enabling efficient overall water splitting

Earth-abundant transition metal-based bifunctional electrocatalysts are promising alternatives to noble metals for overall water electrolysis, but restricted by low activity and durability. Herein, a three-dimensional phosphorus-doped nickel molybdate/nickel molybdate hydrate @phosphates core-shell nanorod clusters on nickel foam self-supported electrode was fabricated by a combined hydrothermal and phosphating process. The phosphorus doping and phosphate coating induced by phosphating process bring in a synergistic effect to improve the electrical conductivity, provide abundant active surface sites and accelerate the surface reaction for nickel molybdate/nickel molybdate hydrate (NiMoO₄/NiMoO₄·nH₂O) heterostructures. These advantages enable the self-supported electrode to exhibit high hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity in 1.0 M KOH with low overpotentials of 148 and 260 mV at 10 mA cm^-2, respectively. When it was employed both as anode and cathode, a cell voltage of 1.62 V is only required to reach the current density of 10 mA cm^-2 in alkaline solution. Especially, the self-supported electrode reveals outstanding durability, which could maintain over 25 h at 10 mA cm^-2 for HER, OER or overall water splitting. This work provides a novel avenue to enhance the electrocatalytic performance of the catalysts by synergistically modulating the intrinsic electrical conductivity, active surface sites and surface reaction.

Cobalt-Nickel Phosphate Composites for the All-Phosphate Asymmetric Supercapacitor and Oxygen Evolution Reaction

Recently, design of cost-effective multifunctional electromaterials for supercapacitors and oxygen evolution reaction (OER) and enhancing their functionalities have become an emphasis in energy storage and conversion. Herein, a series of cheap and functional phosphate composites with different ratios of cobalt and nickel are synthesized using a simple polyalcohol refluxing method, and their excellent capacity and OER properties are systematically studied. Notably, owing to the different major role of Co and Ni elements in the phosphate composites for capacity and OER, the optimal electroconductibility, structural adjustment, electrochemical active sites, and activities for capacity and OER are obtained from the composites with the different ratios of Co/Ni. In addition, using high-capacity BiPO₄ (BPO) as the negative electrodes, the new type of all-phosphate asymmetric supercapacitor (CNPO-40//BPO) shows a high energy density and reaches 36.84 W h kg^-1 at a power density of 254.52 W kg^-1. Its cyclic stability is also more excellent than that of the CNPO-40//AC device using commercial activated carbon as the negative electrodes. This study is beneficial to the more in-depth research on efficient dual-function electromaterials in capacity and OER and provides a high-efficient way to improve the practicality of asymmetric supercapacitors using the high-capacity Bi-based electromaterials as the negative electrodes.

Electrocatalytic Oxygen Evolution by Hierarchically Structured Cobalt-Iron Composites

The development of scalable routes to highly active and efficient oxygen evolution reaction (OER) electrocatalysts based on earth-abundant materials is crucial for post-fossil fuel energy schemes. Here, we demonstrate how commercial copper foam electrodes can be functionalized for water oxidation using a facile electrodeposition process. The resulting composite electrode features hierarchically structured cobalt-iron-based catalyst particles, which offer channel-like structures for the transport of electrolyte and release of oxygen gas bubbles. We report high electrocatalytic OER performance as demonstrated by high current densities at low overpotentials (293 mV at j = 50 mA cm^-2) and long-term stability under technologically relevant alkaline conditions (>24 h in 1.0 M aqueous KOH).

A Trimetallic Cobalt/Iron/Nickel Phytate Catalyst for Overall Water Splitting: Fabrication by Magnetic-Field-Assisted Bipolar Electrodeposition

Electrodeposition is an effective method to prepare various materials. We have established a bipolar electrodeposition system assisted by a constant magnetic field to fabricate a Co/Fe/Ni phytate catalyst with good electrocatalytic activity for overall water splitting. The effects of magnetic and electric fields on the catalytic properties of the material were studied. The catalyst prepared with an N-pole magnetic field (NPMF) exhibited good overall water splitting performance. Benefiting from the synergistic effect of the Co/Fe/Ni-phytate and the advantages of the N-pole magnetic field the NPMF electrode has a continuous 25 hours high-efficiency hydrogen evolution and oxygen evolution reaction at a current density of 100 mA cm^-2 in1.0 M KOH compared with commercial RuO₂ and Pt/C. Bipolar electrodeposition with a constant magnetic field is thus an efficient means to fabricate electrocatalytic water splitting catalysts.

Design Strategies of Transition-Metal Phosphate and Phosphonate Electrocatalysts for Energy-Related Reactions

The key challenge to developing renewable energy conversion and storage devices lies in the exploration and rational engineering of cost-effective and highly efficient electrocatalysts for various energy-related electrochemical reactions. Transition-metal phosphates and phosphonates have shown remarkable performances for these reactions based on their unique physicochemical properties. Compared with transition-metal oxides, phosphate groups in transition-metal phosphates and phosphonates show flexible coordination with diverse orientations, making them an ideal platform for designing active electrocatalysts. Although numerous efforts have been spent on the development of transition-metal phosphate and phosphonate electrocatalysts, some urgent issues, such as low intrinsic catalytic efficiency and low electronic conductivity, have to be resolved in accordance with their applications. In this Review, we focus on the design strategies of highly efficient transition-metal phosphate and phosphonate electrocatalysts, with special emphasis on the tuning of transition-metal-center coordination environment, optimization of electronic structures, increase of catalytically active site densities, and construction of heterostructures. Guided by these strategies, recently developed transition-metal phosphate and phosphonate materials have exhibited excellent activity, selectivity, and stability for various energy-related electrocatalytic reactions, showing great potential for replacing noble-metal-based catalysts in next-generation advanced energy techniques. The existing challenges and prospects regarding these materials are also presented.

Amorphous/low-crystalline core/shell-type nanoparticles as highly efficient and self-stabilizing catalysts for alkaline hydrogen evolution

Amorphous/low-crystalline core/shell-type nanoparticles (Pd-P/Pt-Ni NPs) were prepared via a facile seed-mediated method. After acid treatment, the NPs exhibited self-improved catalysis for hydrogen evolution during electrolysis in an alkaline medium.

The design of zinc-substituted cobalt (pyro)phosphates as efficient bifunctional electrocatalysts for zinc-air batteries

In an effort to rationally design economic electrocatalysts, zinc-substituted cobalt phosphate and pyrophosphate were prepared using facile template-free combustion synthesis. They act as efficient stable bifunctional electrocatalysts due to the tuning of oxygen affinity by zinc substitution and catalytically active cobalt sites. Exploiting their bifunctional activity, these cobalt (pyro)phosphates were incorporated into a zinc-air battery in an alkaline electrolyte.

Na4Ni3P4O15-Ni(OH)2 core-shell nanoparticles as hybrid electrocatalysts for the oxygen evolution reaction in alkaline electrolytes

There is wide interest in developing efficient, robust and low-cost electrode materials for the electrolysis of water to produce clean hydrogen fuel. It is especially important to improve the performance and durability of electrocatalysts for the OER. Here we have shown that the transformation of nanoparticle (n-NNP) and crystalline (c-NNP) forms of mixed phosphate Na4Ni3(PO4)2P2O7 in highly alkaline solutions occurs along various routes and provokes the generation of 2D Ni(OH)2 nanosheets or stable core(phosphate)-shell(Ni(OH)2) particles, respectively. In both cases, in the carbon matrix (through chemical and electrochemical conversion of phosphate in situ during electrolysis in a 6 M KOH or NaOH solution) stable OER electrocatalysts with low overpotentials of 250-290 mV at a current density of 10 mA cm-2 were obtained. The best candidate for the OER process is core-shell particles, which maintain overpotentials of around 250 mV in 6 M KOH for more than 3 days. The activity enhancement can be attributed to the formation of abundant NiOOH nanoparticles on the shell surface due to improved lattice matching. This report discusses future prospects for the creation of core-shell particles to reduce the overpotential of durable electrocatalysts for the OER.

Photocatalytic hydrogen evolution over nickel cobalt bimetallic phosphate anchored graphitic carbon nitrides by regulation of the d-band electronic structure

The electronic regulation function played by the Ni/Co molar ratio in nickel cobalt phosphate co-catalysts is vital for photocatalytic hydrogen evolution efficiency.

Modulation of crystal water in cobalt phosphate for promoted water oxidation

Cobalt phosphate tetrahydrate was identified as the optimal Co-Pi phase for electrocatalytic oxygen evolution reaction.

From a layered iridium(iii)-cobalt(ii) organophosphonate to an efficient oxygen-evolution-reaction electrocatalyst

Bimetallic MOF precursors can produce a homogeneous distribution of mixed-metal oxides after calcination, and thus may provide high efficiency as electrocatalysts in the water splitting process. We designed a layered bimetallic-organophosphonate containing Ir, Co and P because the metal-oxides are well-known for their efficiency in the oxygen-evolution reaction (OER), especially when the phosphate acts as a proton carrier. We describe the structure of the MOF and characteristics of the calcined form, which has outstanding OER characteristics in 1.0 M KOH with an overpotential of 317.7 mV at 10 mA cm-2 and a low Tafel slope of 59.1 mV dec-1.

Recent Progress on Surface Reconstruction of Earth-Abundant Electrocatalysts for Water Oxidation

As one important electrode reaction in electrocatalytic and photoelectrochemical cells for renewable energy circulation, oxygen catalysis has attracted considerable research in developing efficient and cost-effective catalysts. Due to the inevitable formation of oxygenic intermediates on surface sites during the complex reaction steps, the surface structure dynamically evolves toward reaction-preferred active species. To date, transition metal compounds, here defined as TM-Xides, where "X" refers to typical nonmetal elements from group IIIA to VIA, including hydroxide as well, are reported as high-performance oxygen evolution reaction (OER) electrocatalysts. However, more studies observe at least exterior oxidation or amorphization of materials. Thus, whether the TM-Xides can be defined as OER catalysts deserves further discussion. This Review pays attention to recent progress on the surface reconstruction of TM-Xide OER electrocatalysts with an emphasis on the identification of the true active species for OER, and aims at disseminating the real contributors of OER performance, especially under long-duration electrocatalysis.

A mesoporous C,N-co doped Co-based phosphate ultrathin nanosheet derived from a phosphonate-based-MOF as an efficient electrocatalyst for water oxidation

A mesoporous C,N-co doped Co-based phosphate ultrathin nanosheet derived from 2D phosphate MOFs has been explored and exhibits highly efficient OER performance.