Nonconjugated Redox-Active Polymers: Electron Transfer Mechanisms, Energy Storage, and Chemical Versatility

The storage of electric energy in a safe and environmentally friendly way is of ever-growing importance for a modern, technology-based society. With future pressures predicted for batteries that contain strategic metals, there is increasing interest in metal-free electrode materials. Among candidate materials, nonconjugated redox-active polymers (NC-RAPs) have advantages in terms of cost-effectiveness, good processability, unique electrochemical properties, and precise tuning for different battery chemistries. Here, we review the current state of the art regarding the mechanisms of redox kinetics, molecular design, synthesis, and application of NC-RAPs in electrochemical energy storage and conversion. Different redox chemistries are compared, including polyquinones, polyimides, polyketones, sulfur-containing polymers, radical-containing polymers, polyphenylamines, polyphenazines, polyphenothiazines, polyphenoxazines, and polyviologens. We close with cell design principles considering electrolyte optimization and cell configuration. Finally, we point to fundamental and applied areas of future promise for designer NC-RAPs.

Hofmeister Series for Conducting Polymers: The Road to Better Electrochemical Activity?

Poly-3,4-ethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS) is a widely used conducting polymer with versatile applications in organic electronics. The addition of various salts during the preparation of PEDOT:PSS films can significantly influence their electrochemical properties. In this study, we systematically investigated the effects of different salt additives on the electrochemical properties, morphology, and structure of PEDOT:PSS films using a variety of experimental techniques, including cyclic voltammetry, electrochemical impedance spectroscopy, operando conductance measurements and in situ UV-VIS spectroelectrochemistry. Our results showed that the electrochemical properties of the films are closely related to the nature of the additives used and allowed us to establish a probable relationship with the Hofmeister series. The correlation coefficients obtained for the capacitance and Hofmeister series descriptors indicate a strong relationship between the salt additives and the electrochemical activity of PEDOT:PSS films. The work allows us to better understand the processes occurring within PEDOT:PSS films during modification with different salts. It also demonstrates the potential for fine-tuning the properties of PEDOT:PSS films by selecting appropriate salt additives. Our findings can contribute to the development of more efficient and tailored PEDOT:PSS-based devices for a wide range of applications, including supercapacitors, batteries, electrochemical transistors, and sensors.

Realization of High Loading Density Lithium Polymer Batteries by Optimizing Lithium-Ion Transport and Electronic Conductivity

Lithium polymer batteries (LPBs) with a high energy density and safety are being actively studied for their use as an energy storage system. However, bottlenecks to their development include charge-transport resistance and poor interfacial contact. In this paper, we introduce carbon nanofiber (CNF) as a conductive additive and the optimization of porosity in the electrode by calendering to realize a high loading density LPB. A simple dispersion strategy is applied to homogeneously disperse nanofiber additives in the electrode to achieve high electronic conductivity. Calendering with optimized pressing degree was performed on the CNF-based electrode to enhance lithium-ion transport and electron conduction in the LPB. The optimal pressing conditions were confirmed by measuring the electronic conductivity, internal resistance, lithium-ion diffusion coefficient, and charge transport characteristics of the cells. When the electrode was pressed by 35%, optimum electrode wettability by solid polymer electrolyte and contact between particles and current collector were achieved, resulting in the high performance of the LPB. Finally, at the optimized pressing degree, we successfully demonstrate 90% cycle retention during 100 cycles and an improvement of the volumetric energy density by over seven-fold.

Asymmetric Monomer Design Enables Structural Control of M(Salen)-Type Polymers

Conductive and electrochemically active polymers consisting of Salen-type metal complexes as building blocks are of interest for energy storage and conversion applications. Asymmetric monomer design is a powerful tool for fine-tuning the practical properties of conductive electrochemically active polymers but has never been employed for polymers of M(Salen)]. In this work, we synthesize a series of novel conducting polymers composed of a nonsymmetrical electropolymerizable copper Salen-type complex (Cu(3-MeOSal-Sal)en). We show that asymmetrical monomer design provides easy control of the coupling site via polymerization potential control. With in-situ electrochemical methods such as UV-vis-NIR (ultraviolet-visible-near infrared) spectroscopy, EQCM (electrochemical quartz crystal microbalance), and electrochemical conductivity measurements, we elucidate how the properties of these polymers are defined by chain length, order, and cross-linking. We found that the highest conductivity in the series has a polymer with the shortest chain length, which emphasizes the importance of intermolecular iterations in polymers of [M(Salen)].

The Role of Electrochemical and Spectroelectrochemical Techniques in the Preparation and Characterization of Conjugated Polymers: From Polyaniline to Modern Organic Semiconductors

This review article presents different electrochemical and spectroelectrochemical techniques used to investigate conjugated polymers. The development of this research area is presented from an over 40-year perspective-the period of research carried out by Professor Mieczyslaw Lapkowski. Initial research involved polymers derived from simple aromatic compounds, such as polyaniline. Since then, scientific advances in the field of conductive polymers have led to the development of so-called organic electronics. Electrochemical and spectroelectrochemical methods have a great influence in the development of organic semiconductors. Their potential for explaining many phenomena is discussed and the most relevant examples are provided.

Electrochemical Analysis of Heavy Metal Ions Using Conducting Polymer Interfaces

Conducting polymers (CPs) are highly conjugated organic macromolecules, where the electrical charge is transported in intra- and inter-chain pathways. Polyacetylene, polythiophene and its derivatives, polypyrrole and its derivatives, and polyaniline are among the best-known examples. These compounds have been used as electrode modifiers to gain sensitivity and selectivity in a large variety of analytical applications. This review, after a brief introduction to the electrochemistry of CPs, summarizes the application of CPs’ electrode interfaces towards heavy metals’ detection using potentiometry, pulse anodic stripping voltammetry, and alternative non-classical electrochemical methods.

Electropolymerizable Thiophene-Oligonucleotides for Electrode Functionalization

Inserting complex biomolecules such as oligonucleotides during the synthesis of polymers remains an important challenge in the development of functionalized materials. In order to engineer such a biofunctionalized interface, a single-step method for the covalent immobilization of oligonucleotides (ONs) based on novel electropolymerizable lipid thiophene-oligonucleotide (L-ThON) conjugates was employed. Here, we report a new thiophene phosphoramidite building block for the synthesis of modified L-ThONs. The biofunctionalized material was obtained by direct electropolymerization of L-ThONs in the presence of 2,2'-bithiophene (BTh) to obtain a copolymer film on indium tin oxide electrodes. In situ electroconductance measurements and microstructural studies showed that the L-ThON was incorporated in the BTh copolymer backbone. Furthermore, the covalently immobilized L-ThON sequence showed selectivity in subsequent hybridization processes with a complementary target, demonstrating that L-ThONs can directly be used for manufacturing materials via an electropolymerization strategy. These results indicate that L-ThONs are promising candidates for the development of stable ON-based bioelectrochemical platforms.

Polypyrrole Percolation Network Gas Sensors: Improved Reproducibility through Conductance Monitoring during Polymer Growth

Conducting-polymer-based electrical percolation networks are promising materials for use in high-sensitivity chemiresistive devices. An ongoing challenge is to create percolation networks that have consistent properties, so that devices based on these materials do not have to be individually calibrated. Here, an in situ conductance technique is used during the electrochemical growth of polypyrrole (PPy) percolation networks. The drain current (i _d) across the interdigitated electrodes (IDEs) is a measure of the conductance of the PPy network during electrochemical polymerization. The i _d curve is used to determine the percolation region. To improve the reproducibility of PPy percolation networks, an in situ conductance monitoring method based on the value of i _d is used. A set of optimal ammonia gas percolation sensors was created using this method with an average sensitivity of ΔR/R ₀ × 100% ppm^-1 = 11.3 ± 1.2% ppm^-1 and an average limit of detection of 15.0 ± 3.6 ppb.

Bipolarons rule the short-range terahertz conductivity in electrochemically doped P3HT

Doping of organic semiconductor films enhances their conductivity for applications in organic electronics, thermoelectrics and bioelectronics. However, much remains to be learnt about the properties of the conductive charges in order to optimize the design of the materials. Electrochemical doping is not only the fundamental mechanism in organic electrochemical transistors (OECTs), used in biomedical sensors, but it also represents an ideal playground for fundamental studies. Benefits of investigating doping mechanisms via electrochemistry include controllable doping levels, reversibility and high achievable carrier densities. We introduced here a new technique, applying in situ terahertz (THz) spectroscopy directly to an electrochemically doped polymer in combination with spectro-electrochemistry and chronoamperometry. We evaluate the intrinsic short-range transport properties of the polymer (without the effects of long-range disorder, grain boundaries and contacts), while precisely tuning the doping level via the applied oxidation voltage. Analysis of the complex THz conductivity reveals both the mobility and density of the charges. We find that polarons and bipolarons need to co-exist in an optimal ratio to reach high THz conductivity (∼300 S cm^-1) and mobility (∼7 cm² V^-1 s^-1) of P3HT in aqueous KPF₆ electrolyte. In this regime, charge mobility increases and a high fraction of injected charges (up to 25%) participates in the transport via mixed-valence hopping. We also show significantly higher conductivity in electrochemically doped P3HT with respect to co-processed molecularly doped films at a similar doping level, which suffer from low mobility. Efficient molecular doping should therefore aim for reduced disorder, high doping levels and backbones that favour bipolaron formation.

In Situ Spectroelectrochemical-Conductance Measurements as an Efficient Tool for the Evaluation of Charge Trapping in Conducting Polymers

In situ UV-vis-NIR spectroelectrochemistry has been intensively used to evaluate the electronic transitions during the charging/discharging process of π-conjugated polymers. However, the type of charge carrier and the mechanisms of their transport, remains still a point of discussion. Herein, the coupling between UV-vis-NIR spectroscopy and in situ electrochemical-conductance measurements is proposed to compare the doping process of three different thiophene-based conducting polymers. The simultaneous monitoring of electrical and absorption properties, associated with low energy electronic transitions characteristic for polarons and bipolarons, was achieved. In addition, this method allows evaluating the reversible charge trapping mechanism of poly-3,4-o-xylendioxythiophene (PXDOT), caused by the formation of σ-dimers, making it a very useful tool to determine relevant physicochemical properties of conductive materials.

A Novel Cobalt Metallopolymer with Redox-Matched Conjugated Organic Backbone via Electropolymerization of a Readily Available N4 Cobalt Complex

Fast and reversible cobalt-centered redox reactions in metallopolymers are the key to using these materials in energy storage, electrocatalytic, and sensing applications. Metal-centered electrochemical activity can be enhanced via redox matching of the conjugated organic backbone and cobalt centers. In this study, we present a novel approach to redox matching via modification of the cobalt coordination site: a conductive electrochemically active polymer was electro-synthesized from [Co(Amben)] complex (Amben = N,N′-bis(o-aminobenzylidene)ethylenediamine) for the first time. The poly-[Co(Amben)] films were investigated by cyclic voltammetry, electrochemical quartz crystal microbalance (EQCM), in situ UV-vis-NIR spectroelectrochemistry, and in situ conductance measurements between −0.9 and 1.3 V vs. Ag/Ag⁺. The polymer displayed multistep redox processes involving reversible transfer of the total of 1.25 electrons per repeat unit. The findings indicate consecutive formation of three redox states during reversible electrochemical oxidation of the polymer film, which were identified as benzidine radical cations, Co(III) ions, and benzidine di-cations. The Co(II)/Co(III) redox switching is retained in the thick polymer films because it occurs at potentials of high polymer conductivity due to the optimum redox matching of the Co(II)/Co(III) redox pair with the organic conjugated backbone. It makes poly-[Co(Amben)] suitable for various practical applications based on cobalt-mediated redox reactions.

Nickel(II) Complex of N4 Schiff Base Ligand as a Building Block for a Conducting Metallopolymer with Multiple Redox States

Metal–ligand interactions in monomeric and polymeric transition metal complexes of Schiff base ligands largely define their functional properties and perspective applications. In this study, redox behavior of a nickel(II) N₄-anilinosalen complex, [NiAmben] (where H₂Amben = N,N′-bis(o-aminobenzylidene)ethylenediamine) was studied by cyclic voltammetry in solvents of different Lewis basicity. A poly-[NiAmben] film electrochemically synthesized from a 1,2-dichloroethane-based electrolyte was investigated by a combination of cyclic voltammetry, electrochemical quartz crystal microbalance, in situ UV-Vis spectroelectrochemistry, and in situ conductance measurements between −0.9 and 1.3 V vs. Ag/Ag⁺. The polymer displayed multistep redox processes involving reversible transfer of the total of ca. 1.6 electrons per repeat unit, electrical conductivity over a wide potential range, and multiple color changes in correlation with electrochemical processes. Performance advantages of poly-[NiAmben] over its nickel(II) N₂O₂ Schiff base analogue were identified and related to the increased number of accessible redox states in the polymer due to the higher extent of electronic communication between metal ions and ligand segments in the nickel(II) N₄-anilinosalen system. The obtained results suggest that electrosynthesized poly-[NiAmben] films may be viable candidates for energy storage and saving applications.

Cost-Effective, Flexible, and Colorful Dynamic Displays: Removing Underlying Conducting Layers from Polymer-Based Electrochromic Devices

Electrochromic (EC) materials and devices provide a user-controlled, dynamic way of displaying information using low power, making them interesting for a range of applications in numerous markets, including logistics, retail, consumer goods, and health care. To optimize the cost while simplifying the production, expanding the color space, and enhancing the contrast and vibrancy of EC displays aimed for cost-sensitive products, we sought to reduce the number of layers as well as remove the underlying conducting layer that accounts for a substantial fraction of the cost of a printed label. Here, we show how conjugated electrochromic polymers, which are inherently semiconducting, can be used to accomplish this goal and afford printable EC displays with a flexible form factor. Using a combination of electrochemical probes, in situ spectroscopy, solid-state conductivity, and in situ conductance measurements, we have studied and compared five different EC polymers with conductivities spanning multiple orders of magnitude and colors that span most of the visible range, identifying polymers and properties that allow for switching from the colored to the clear state without an underlying conducting layer. Finally, we incorporate these EC polymers into optimized flexible devices without an underlying conductor and demonstrate that they are able to provide on-demand, reversible colored-to-clear switching on the order of seconds to minutes, with operating voltages below ±1 V, optical memories exceeding 60 min, and a shelf-life exceeding 12 months.