A Portable Self-Powered Electrochemical Sensor Based on Zinc-Air Battery for Detection of Hydrogen Sulfide

The self-powered electrochemical sensor (SPES), an analytical sensing device without external power supply, is integrated with the dual function of power supply and detection performance, which lay the foundation for the development of intelligent and portable electrochemical sensing devices. Herein, a novel SPES based on a zinc-air battery was constructed for the detection of hydrogen sulfide (H2S) in the lysate of colon cancer cells. Typically, an Fe/Fe3C@graphene foam with oxygen reduction performance was used to construct SPES based on a zinc-air battery (ZAB-SPES), which brings the open-circuit voltage to 1.30 V. Among them, the poisoning effect of H2S causes the catalytic performance of the oxygen reduction catalyst to decrease, causing a significant decrease in the discharge voltage of ZAB. Based on this principle, ZAB-SPES was constructed for the detection of H2S using a digital multimeter. The proposed ZAB-SPES demonstrated good selectivity and reproducibility for detecting H2S compared to the results of the H2S-specific fluorescence probe. This strategy enriches the idea of constructing a self-powered sensor and a digital multimeter as detection devices, providing technical support for the portability of SPESs.

Advances in MXene-Based Electrochemical (Bio)Sensors for Neurotransmitter Detection

Neurotransmitters are chemical messengers that play an important role in the nervous system's control of the body's physiological state and behaviour. Abnormal levels of neurotransmitters are closely associated with some mental disorders. Therefore, accurate analysis of neurotransmitters is of great clinical importance. Electrochemical sensors have shown bright application prospects in the detection of neurotransmitters. In recent years, MXene has been increasingly used to prepare electrode materials for fabricating electrochemical neurotransmitter sensors due to its excellent physicochemical properties. This paper systematically introduces the advances in MXene-based electrochemical (bio)sensors for the detection of neurotransmitters (including dopamine, serotonin, epinephrine, norepinephrine, tyrosine, NO, and H₂S), with a focus on their strategies for improving the electrochemical properties of MXene-based electrode materials, and provides the current challenges and future prospects for MXene-based electrochemical neurotransmitter sensors.

Review of Chemical Sensors for Hydrogen Sulfide Detection in Organisms and Living Cells

As the third gasotransmitter, hydrogen sulfide (H₂S) is involved in a variety of physiological and pathological processes wherein abnormal levels of H₂S indicate various diseases. Therefore, an efficient and reliable monitoring of H₂S concentration in organisms and living cells is of great significance. Of diverse detection technologies, electrochemical sensors possess the unique advantages of miniaturization, fast detection, and high sensitivity, while the fluorescent and colorimetric ones exhibit exclusive visualization. All these chemical sensors are expected to be leveraged for H₂S detection in organisms and living cells, thus offering promising options for wearable devices. In this paper, the chemical sensors used to detect H₂S in the last 10 years are reviewed based on the different properties (metal affinity, reducibility, and nucleophilicity) of H₂S, simultaneously summarizing the detection materials, methods, linear range, detection limits, selectivity, etc. Meanwhile, the existing problems of such sensors and possible solutions are put forward. This review indicates that these types of chemical sensors competently serve as specific, accurate, highly selective, and sensitive sensor platforms for H₂S detection in organisms and living cells.

Highly Selective H2S Gas Sensor Based on Ti3C2Tx MXene-Organic Composites

Cost-effective and high-performance H₂S sensors are required for human health and environmental monitoring. 2D transition-metal carbides and nitrides (MXenes) are appealing candidates for gas sensing due to good conductivity and abundant surface functional groups but have been studied primarily for detecting NH₃ and VOCs, with generally positive responses that are not highly selective to the target gases. Here, we report on a negative response of pristine Ti₃C₂T_x thin films for H₂S gas sensing (in contrast to the other tested gases) and further optimization of the sensor performance using a composite of Ti₃C₂T_x flakes and conjugated polymers (poly[3,6-diamino-10-methylacridinium chloride-co-3,6-diaminoacridine-squaraine], PDS-Cl) with polar charged nitrogen. The composite, preserving the high selectivity of pristine Ti₃C₂T_x, exhibits an H₂S sensing response of 2% at 5 ppm (a thirtyfold sensing enhancement) and a low limit of detection of 500 ppb. In addition, our density functional theory calculations indicate that the mixture of MXene surface functional groups needs to be taken into account to describe the sensing mechanism and the selectivity of the sensor in agreement with the experimental results. Thus, this report extends the application range of MXene-based composites to H₂S sensors and deepens the understanding of their gas sensing mechanisms.

Biocompatible Electrochemical Sensor Based on Platinum-Nickel Alloy Nanoparticles for In Situ Monitoring of Hydrogen Sulfide in Breast Cancer Cells

Hydrogen sulfide (H₂S), an endogenous gasotransmitter, is produced in mammalian systems and is closely associated with pathological and physiological functions. Nevertheless, the complete conversion of H₂S is still unpredictable owing to the limited number of sensors for accurate and quantitative detection of H₂S in biological samples. In this study, we constructed a disposable electrochemical sensor based on PtNi alloy nanoparticles (PtNi NPs) for sensitive and specific in situ monitoring of H₂S released by human breast cancer cells. PtNi alloy NPs with an average size of 5.6 nm were prepared by a simple hydrothermal approach. The conversion of different forms of sulfides (e.g., H₂S, HS^-, and S^2-) under various physiological conditions hindered the direct detection of H₂S in live cells. PtNi NPs catalyze the electrochemical oxidation of H₂S in a neutral phosphate buffer (PB, pH 7.0). The PtNi-based sensing platform demonstrated a linear detection range of 0.013-1031 µM and the limit of detection was 0.004 µM (S/N = 3). Moreover, the PtNi sensor exhibited a sensitivity of 0.323 μA μM^-1 cm^-2. In addition, the stability, repeatability, reproducibility, and anti-interference ability of the PtNi sensor exhibited satisfactory results. The PtNi sensor was able to successfully quantify H₂S in pond water, urine, and saliva samples. Finally, the biocompatible PtNi electrode was effectively employed for the real-time quantification of H₂S released from breast cancer cells and mouse fibroblasts.

Progress on the reaction-based methods for detection of endogenous hydrogen sulfide

Hydrogen sulfide (H₂S) is a biologically signaling molecule that mediates a wide range of physiological functions, which is frequently misregulated in numerous pathological processes. As such, measurement of H₂S holds great attention due to its unique physiological and pathophysiological roles. Currently, a variety of methods based on the H₂S-involved reactions have been reported for detection of endogenous H₂S, bearing the advantages of good specificity and high sensitivity. This review describes in detail the types of reactions, their mechanisms, and their applications in biological research, thus hopefully providing some guidelines to the researchers in this field for further investigation.