Highly selective detection of deoxyribonucleic acid in living cells using RecA-green fluorescent protein-single-stranded deoxyribonucleic acid filament fluorescence resonance energy transfer probe

A fluorescence resonance energy transfer (FRET) method was developed for double-stranded deoxyribonucleic acid (dsDNA) detection in living cells using the RecA-GFP (green fluorescent protein) fusion protein filament. In brief, the thiol-modified single-stranded DNA (ssDNA) was attached to gold nanoparticles (AuNPs); on the contrary, the prepared RecA-GFP fusion protein interacted with ssDNA. Due to the FRET between AuNPs and RecA-GFP, fluorescence of RecA-GFP fusion protein was quenched. In the presence of homologous dsDNA, homologous recombination occurred to release RecA-GFP fusion protein. Thus, the fluorescence of RecA-GFP was recovered. The dsDNA concentration was detected using fluorescence intensity of RecA-GFP. Under optimal conditions, this method could detect dsDNA activity as low as 0.015 optical density (OD) Escherichia coli cells, with a wide linear range from 0.05 to 0.9 OD cells, and the regression equation was ΔF = 342.7c + 78.9, with a linear relationship coefficient of 0.9920. Therefore, it provided a promising approach for the selective detection of dsDNA in living cells for early clinical diagnosis of genetic diseases.

Nanozyme-based colorimetric biosensor with a systemic quantification algorithm for noninvasive glucose monitoring

Diabetes mellitus accompanies an abnormally high glucose level in the bloodstream. Early diagnosis and proper glycemic management of blood glucose are essential to prevent further progression and complications. Biosensor-based colorimetric detection has progressed and shown potential in portable and inexpensive daily assessment of glucose levels because of its simplicity, low-cost, and convenient operation without sophisticated instrumentation. Colorimetric glucose biosensors commonly use natural enzymes that recognize glucose and chromophores that detect enzymatic reaction products. However, many natural enzymes have inherent defects, limiting their extensive application. Recently, nanozyme-based colorimetric detection has drawn attention due to its merits including high sensitivity, stability under strict reaction conditions, flexible structural design with low-cost materials, and adjustable catalytic activities. This review discusses various nanozyme materials, colorimetric analytic methods and mechanisms, recent machine learning based analytic methods, quantification systems, applications and future directions for monitoring and managing diabetes.

Nanomaterials Used in Fluorescence Polarization Based Biosensors

Fluorescence polarization (FP) has been applied in detecting chemicals and biomolecules for early-stage diagnosis, food safety analyses, and environmental monitoring. Compared to organic dyes, inorganic nanomaterials such as quantum dots have special fluorescence properties that can enhance the photostability of FP-based biosensing. In addition, nanomaterials, such as metallic nanoparticles, can be used as signal amplifiers to increase fluorescence polarization. In this review paper, different types of nanomaterials used in in FP-based biosensors have been reviewed. The role of each type of nanomaterial, acting as a fluorescent element and/or the signal amplifier, has been discussed. In addition, the advantages of FP-based biosensing systems have been discussed and compared with other fluorescence-based techniques. The integration of nanomaterials and FP techniques allows biosensors to quickly detect analytes in a sensitive and cost-effective manner and positively impact a variety of different fields including early-stage diagnoses.

Highly selective and sensitive detection of glutathione over cysteine and homocysteine with a turn-on fluorescent biosensor based on cysteamine-stabilized CdTe quantum dots

In this work, cysteamine (CA) stabilized CdTe quantum dots (QDs) (CA-CdTe QDs) and sodium citrate stabilized gold nanoparticles (AuNPs) were prepared. Because of the strong electrostatic interaction and spectral overlap of emission spectrum of CA-CdTe QDs and absorption spectrum of AuNPs, a highly effective fluorescence resonance energy transfer (FRET) system was formed and the fluorescence of CA-CdTe QDs was strongly quenched. The synthesized CA-CdTe and AuNPs were self-assembled to large clusters due to the electrostatic attraction and the fluorescence of CA-CdTe was sharply quenched as a result of FRET. Under the optimum pH of 5.5, the positive GSH could assemble with negative AuNPs through electrostatic interaction and destroy the FRET system of CA-CdTe and AuNPs, due to the red shift of absorption wavelength of AuNPs caused by aggregation. The fluorescence of CA-CdTe recovered, and the recovered fluorescence efficiency shows a linear function against the GSH concentrations from 6.7 nM to 0.40 μM, with a detecting limit of 3.3 nM. The quenched emission of CA-CdTe could be recovered attributed to the aggregation of AuNPs by GSH. Under optimal conditions, the sensing system was successfully applied in the detection of GSH in real human blood plasma samples with a recovery of 99.5-102.3%, showing a promising future for the highly sensitive and selective GSH detection in the human blood plasma samples.

A sandwiched photoelectrochemical biosensing platform for detecting Cytokeratin-19 fragments based on Ag2S-sensitized BiOI/Bi2S3 heterostructure amplified by sulfur and nitrogen co-doped carbon quantum dots

A sandwiched photoelectrochemical (PEC) immunosensor based on BiOI/Bi₂S₃/Ag₂S was designed for the quantitative detection of cytokeratin-19 fragments (CYFRA21-1) in serum. In this work, due to the intervention of the narrow band gap Bi₂S₃, the absorption of the light source by the BiOI/Bi₂S₃ heterostructure has been significantly enhanced. Meanwhile, the matched band structure of BiOI, Bi₂S₃ and Ag₂S promoted the rapid transfer of electrons between the conduction bands and effectively inhibited the recombination of electron-hole pairs, thus enhanced the photoelectric signals. Sulfur and nitrogen co-doped carbon quantum dots (S,N-CQDs) with up-conversion luminescence properties provided more light energy for the base materials. On the other hand, S,N-CQDs were combined with Ab₂ through polydopamine (PDA), as secondary antibody labels, further enhanced the sensitivity of the sensor. Herein, the linear range of the sensor was from 0.001 to 100 ng mL^-1 and the detection limit was 1.72 pg mL^-1. In addition, the sensor provides a feasible way for the detection of tumor markers due to its excellent selectivity, repeatability and good stability.

Recent Advances in Aptasensor for Cytokine Detection: A Review

Cytokines are proteins secreted by immune cells. They promote cell signal transduction and are involved in cell replication, death, and recovery. Cytokines are immune modulators, but their excessive secretion causes uncontrolled inflammation that attacks normal cells. Considering the properties of cytokines, monitoring the secretion of cytokines in vivo is of great value for medical and biological research. In this review, we offer a report on recent studies for cytokine detection, especially studies on aptasensors using aptamers. Aptamers are single strand nucleic acids that form a stable three-dimensional structure and have been receiving attention due to various characteristics such as simple production methods, low molecular weight, and ease of modification while performing a physiological role similar to antibodies.

Label-free triplex DNA-based biosensing of transcription factor using fluorescence resonance energy transfer between N-doped carbon dot and gold nanoparticle

Herein, a new turn-on fluorescent assay was established as a platform for the sensing of transcription factor NF-kB p50 based on triplex DNA labeled with N-doped carbon dots (NCDs) and gold nanoparticles (AuNPs) as donors and acceptors, respectively in the fluorescence resonance energy transfer (FRET) system. The synthetized nanoparticles were studied by different characterization techniques. A labeled DNA molecule was designed to form a triplex when no target protein existence and reported its formation by the change in FRET efficiency. While the triplex DNA was formed, the fluorescence of carbon dots at 503 nm (excitation at 460 nm) was quenched by FRET between NCD and AuNP. However, presence of NF-kB p50 followed by the considerable enhancement in the fluorescence intensity caused by the release of AuNPs labeled single stranded DNA from the triplex DNA structure, used for sensitive determination of the transcription factor. This technique showed a linearity (R2 = 0.9943) in the range of 20-150 pM with a limit of detection of 9 pM for the determination of NF-kB p50. Moreover, the sequence-specific triplex-based biosensor could discriminate NF-kB p50 from the other proteins with high selectively. Our results suggest that the biosensor provides a generalizable platform for rapid detection of NF-kB p50 in synthetic medium, promising in prevention and early diagnosis of cancer.

Low dimensional materials for glucose sensing

Biosensors are essential components for effective healthcare management. Since biological processes occur on molecular scales, nanomaterials and nanosensors intrinsically provide the most appropriate landscapes for developing biosensors. Low-dimensional materials have the advantage of offering high surface areas, increased reactivity and unique physicochemical properties for efficient and selective biosensing. So far, nanomaterials and nanodevices have offered significant prospects for glucose sensing. Targeted glucose biosensing using such low-dimensional materials enables much more effective monitoring of blood glucose levels, thus providing significantly better predictive diabetes diagnostics and management. In this review, recent advances in using low dimensional materials for sensing glucose are summarized. Sensing fundamentals are discussed, as well as invasive, minimally-invasive and non-invasive sensing methods. The effects of morphological characteristics and size-dependent properties of low dimensional materials are explored for glucose sensing, and the key performance parameters such as selectivity, stability and sensitivity are also discussed. Finally, the challenges and future opportunities that low dimensional materials can offer for glucose sensing are outlined.

Exhaled breath biomarker sensing

This goal of this minireview is to introduce the reader to the area of research concerned with exhaled breath analysis for the purpose of detecting abnormal levels of physiologically-relevant chemical markers reflective of respiratory diseases. Two main two groups of sensing methods are reviewed: mass spectrometry and (bio)sensors. The discussion focuses on biosensor applications for EB and EBC analyses, which are presented in detail. The review finishes with conclusions and future perspectives, including recommendations for future near-term and long-term development of EBC biomarker sensing.

Fluorometric detection of bisphenol A using β-cyclodextrin-functionalized ZnO QDs

The estrogenic property of bisphenol A (BPA) leads to potential adverse health and ecological effects. A simple, selective, and cost-effective sensor capable of detecting BPA would have a noteworthy relevance for the environmental system. The present work illustrates the synthesis and characterization of β-cyclodextrin (β-CD) functionalized zinc oxide (ZnO) quantum dots (QDs) for the selective detection of BPA. BPA has a fluorescence quenching effect on functionalized ZnO QDs, and the decrease in fluorescence intensity is associated with the BPA concentration between 2 and 10 μM. Under the optimum reaction condition, a good linear correlation was obtained between relative fluorescence-quenching intensity of β-cyclodextrin-functionalized ZnO QDs and BPA concentration (R² = 0.9891). The lower detection limit of functionalized QDs for BPA was estimated to be 0.19 μM, which is lower than the toxic limits in aquatic biota. The fluorescence-based detection of BPA may be ascribed to the electron transfer mechanism, which is elucidated with scientific details from the literature.

Recent Trends in Noble Metal Nanoparticles for Colorimetric Chemical Sensing and Micro-Electronic Packaging Applications

Noble metal NPs are highly attractive candidates because of their unique combination of physical, chemical, mechanical, and structural properties. A lot of developments in this area are still fascinating the materials research community, and are broadly categorized in various sectors such as chemical sensors, biosensors, Förster resonance energy transfer (FRET), and microelectronic applications. The related function and properties of the noble metals in these areas can be further tailored by tuning their chemical, optical, and electronic properties that are influenced by their size, shape, and distribution. The most widely used Au and Ag NPs in dispersed phase below 100 nm exhibit strong color change in the visible range which alters upon aggregation of the NPs. The chemical sensing of the analyte is influenced by these NPs aggregates. In this article, we have summarized the uniqueness of noble metal NPs, their synthesis methods, nucleation and growth process, and their important applications in chemical sensing, microelectronic packaging, and Förster resonance energy transfer.

FRET-based fluorescent probe for drug assay from amino acid@gold-carbon nanoparticles

Biocompatible and luminescent nanostructures synthesized by capping gold-carbon nanoparticles (HOOC-4-C₆H₄-AuNPs) with amino acids tyrosine, tryptophan, and cysteine were used for the quantitative estimation of ranitidine (RNH), a peptic ulcer and gastroesophageal reflux drug. We applied a fluorescence quenching mechanism to investigate the viability of the energy transfer based on gold-carbon nanosensors. Förster resonance energy transfer (FRET) calculations showed a donor-acceptor distance of 1.69 nm (Tyr@AuNPs), 2.27 nm (Trp@AuNPs), and 2.32 nm (Cys@AuNPs). The constant time-resolved fluorescence lifetime measurements supported the static quenching nature. This method was successfully utilized in the detection and quantification of RNH, with a limit of detection (LOD) of 0.174, 0.56, and 0.332 μM for Tyr@AuNP, Trp@AuNP, and Cys@AuNP bioconjugates, respectively. This approach was also successful in the quantification of RNH in spiked serum samples.

Determination of atenolol based on the reversion of the fluorescence resonance energy transfer between AgInS2 quantum dots and Au nanoparticles

The present work focused on the development of a fluorescence resonance energy transfer (FRET)-based sensing platform for the monitoring of atenolol in pharmaceutical formulations. The implemented approach involved the assembly of d-penicillamine-capped AgInS₂/ZnS quantum dots (QDs), as energy donors, and gold nanoparticles (AuNPs) as acceptors and the establishment of electrostatic interaction between both capping ligands at the nanoparticle surface, which induced the inhibition of the ternary QD photoluminescence (PL). The presence of a ZnS shell around the ternary QD core and the use of cysteamine (CA) as the AuNP capping ligand, instead of the typical citrate, allowed a more efficient FRET process to occur. The ability of Cd-free ternary QDs to be used as a sensing element in FRET-based assays was demonstrated, emphasizing the advantages relative to the common Cd-based QDs, when seeking the implementation of more environmentally friendly and less toxic analytical methodologies. The influence of several β-blocker drugs on the FRET donor-acceptor assemblies was thoroughly assessed. Atenolol and nadolol caused the aggregation of CA-AuNPs via hydrogen bonding interactions which reduced the spectral overlap between the donor and acceptor, impairing the FRET process and consequently the emission of the QDs was restored. Under the optimized conditions, the obtained results exhibited a linear relationship between the QD PL recovery signal and atenolol concentration of up to 11.22 mg L^-1 with a detection limit of 1.05 mg L^-1. This FRET sensing platform was successfully applied in the determination of atenolol in pharmaceutical formulations with recovery values ranging from 97.4 to 104.3%.

Fluorescent glycoconjugates and their applications

Fluorescent glycoconjugates are discussed for their applications in biology in vitro, in cell assays and in animal models. Advantages and limitations are presented for each design using a fluorescent core conjugated with glycosides, or vice versa.

Noninvasive glucose detection in exhaled breath condensate

Two-thirds of patients with diabetes avoid regularly monitoring their blood glucose levels because of the painful and invasive nature of current blood glucose detection. As an alternative to blood sample collection, exhaled breath condensate (EBC) has emerged as a promising noninvasive sample from which to monitor glucose levels. However, this dilute sample matrix requires sensors capable of detecting glucose with high resolution at nanomolar and micromolar concentrations. Recent developments in EBC collection methods and highly sensitive glucose biosensors provide a path toward enabling robust and sensitive glucose detection in EBC. This review addresses current and emerging EBC collection and glucose sensing modalities capable of quantifying glucose in EBC samples. We highlight the opportunities and challenges for development and integration of EBC glucose detection systems that will enable clinically robust and accurate EBC glucose measurements for improved glycemic control.

Exploiting the fluorescence resonance energy transfer (FRET) between CdTe quantum dots and Au nanoparticles for the determination of bioactive thiols

This work focused the implementation of FRET processes between CdTe quantum dots (QDs), acting as donors, and gold nanoparticles (AuNPs), behaving as acceptors, for the determination of several bioactive thiols such as captopril, glutathione, l-cysteine, thiomalic acid and coenzyme M. The surface chemistry of the QDs and AuNPs was adjusted with adequate capping ligands, i.e. mercaptopropionic acid and cysteamine, respectively, to guarantee the establishment of strong electrostatic interaction between them and promoting the formation of stable FRET assemblies. Under these circumstances the fluorescence emission of the QDs was completely suppressed by the AuNPs. The assayed target analytes were capable of disrupting the donor-acceptor assemblies yielding a concentration-related reversion of the FRET process and restoring QDs fluorescence emission. Distinct mechanisms, involving enhancing of the QDs quantum yield (QY), AuNPs agglomeration, nanoparticles detachment, etc., could be proposed to explain the referred FRET reversion. The developed approach assured good analytical working ranges and demonstrate adequate sensitivity for the assayed compounds, anticipating great prospective for implementing rapid, simple and reliable sensing methodologies for the monitoring of pharmaceutical, food and environmental species. However, selectivity could be a hindrance in the detection of these bioactive thiols in more complex matrices such as environmental and food samples. This problem could be circumvented through the employment of multivariate chemometric methods for the analysis and processing of whole fluorometric response. Moreover, the proposed methodology shows a great analytical versatility since it is possible to easily adapt the surface chemistry, of both QDs and AuNPs, to the chemical nature of the target analyte.

Optical Sensors Based on II-VI Quantum Dots

Fundamentals of quantum dots (QDs) sensing phenomena show the predominance of these fluorophores over standard organic dyes, mainly because of their unique optical properties such as sharp and tunable emission spectra, high emission quantum yield and broad absorption. Moreover, they also indicate no photo bleaching and can be also grown as no blinking emitters. Due to these properties, QDs may be used e.g., for multiplex testing of the analyte by simultaneously detecting multiple or very weak signals. Physico-chemical mechanisms used for analyte detection, like analyte stimulated QDs aggregation, nonradiative Förster resonance energy transfer (FRET) exhibit a number of QDs, which can be applied in sensors. Quantum dots-based sensors find use in the detection of ions, organic compounds (e.g., proteins, sugars, volatile substances) as well as bacteria and viruses.

A conjugated carbon-dot–tyrosinase bioprobe for highly selective and sensitive detection of dopamine

A conjugated carbon-dot–tyrosinase bioprobe was first designed and applied for sensitive and selective dopamine detection in human serum.

Pd nanoparticle-decorated graphitic C3N4 nanosheets with bifunctional peroxidase mimicking and ON–OFF fluorescence enable naked-eye and fluorescent dual-readout sensing of glucose

Pd nanoparticle-decorated graphitic C₃N₄ nanosheets with peroxidase mimicking and ON–OFF fluorescence for the naked-eye and fluorescent dual-readout detection of glucose.

A novel ratiometric fluorescent probe for the detection of uric acid in human blood based on H2O2-mediated fluorescence quenching of gold/silver nanoclusters

In this work, a ratiometric fluorescent probe (RF-probe) for highly sensitive and selective detection of uric acid was reported for the first time toward H₂O₂ based on inner filter effect (IFE) between bimetallic gold/silver nanoclusters (Au/Ag NCs) and 2,3-diaminophenazine (DAP). For this RF-probe, uric acid was degraded to allantoin and H₂O₂. Upon the addition of HRP, o-phenylenediamine (OPD) could be catalytically oxidized to DAP in the presence of H₂O₂, then the fluorescence intensity corresponding to DAP at 580 nm increased dramatically with a fluorescence quenching of BSA-Au/Ag NCs at 690 nm, resulting in a RF-probe toward uric acid. This RF-probe allowed for the sensitive detection of uric acid in range of 5.0 × 10^-6 M to 5.0 × 10^-5 M with a detection limit (S/N = 3) as low as 5.1 × 10^-6 M. At the same time, it has been successfully used for uric acid levels detection in human serum, and the results are consistent with those of the hospital. RF-probe built may provide a ratiometric fluorescence universal platform for detection of various species involving in the production of H₂O₂ in other biological systems.

More Than a Light Switch: Engineering Unconventional Fluorescent Configurations for Biological Sensing

Fluorescence is a powerful and sensitive tool in biological detection, used widely for cellular imaging and in vitro molecular diagnostics. Over time, three prominent conventions have emerged in the design of fluorescent biosensors: a sensor is ideally specific for its target, only one fluorescence signal turns on or off in response to the target, and each target requires its own sensor and signal combination. These are conventions but not requirements, and sensors that break with one or more of these conventions can offer new capabilities and advantages. Here, we review "unconventional" fluorescent sensor configurations based on fluorescent dyes, proteins, and nanomaterials such as quantum dots and metal nanoclusters. These configurations include multifluorophore Förster resonance energy transfer (FRET) networks, temporal multiplexing, photonic logic, and cross-reactive arrays or "noses". The more complex but carefully engineered biorecognition and fluorescence signaling modalities in unconventional designs are richer in information, afford greater multiplexing capacity, and are potentially better suited to the analysis of complex biological samples, interactions, processes, and diseases. We conclude with a short perspective on the future of unconventional fluorescent sensors and encourage researchers to imagine sensing beyond the metaphorical light bulb and light switch combination.

Fluorescent Nanobiosensors for Sensing Glucose

Glucose sensing in diabetes diagnosis and therapy is of great importance due to the prevalence of diabetes in the world. Furthermore, glucose sensing is also critical in the food and drug industries. Sensing glucose has been accomplished through various strategies, such as electrochemical or optical methods. Novel transducers made with nanomaterials that integrate fluorescent techniques have allowed for the development of advanced glucose sensors with superior sensitivity and convenience. In this review, glucose sensing by fluorescent nanobiosensor systems is discussed. Firstly, typical fluorescence emitting/interacting nanomaterials utilized in various glucose assays are discussed. Secondly, strategies for integrating fluorescent nanomaterials and biological sensing elements are reviewed and discussed. In summary, this review highlights the applicability of fluorescent nanomaterials, which makes them ideal for glucose sensing. Insight on the future direction of fluorescent nanobiosensor systems is also provided.

Quantum Dots Applied to Methodology on Detection of Pesticide and Veterinary Drug Residues

The pesticide and veterinary drug residues brought by large-scale agricultural production have become one of the issues in the fields of food safety and environmental ecological security. It is necessary to develop the rapid, sensitive, qualitative and quantitative methodology for the detection of pesticide and veterinary drug residues. As one of the achievements of nanoscience, quantum dots (QDs) have been widely used in the detection of pesticide and veterinary drug residues. In these methodology studies, the used QD-signal styles include fluorescence, chemiluminescence, electrochemical luminescence, photoelectrochemistry, etc. QDs can also be assembled into sensors with different materials, such as QD-enzyme, QD-antibody, QD-aptamer, and QD-molecularly imprinted polymer sensors, etc. Plenty of study achievements in the field of detection of pesticide and veterinary drug residues have been obtained from the different combinations among these signals and sensors. They are summarized in this paper to provide a reference for the QD application in the detection of pesticide and veterinary drug residues.

Ultrasensitive and highly selective FRET aptasensor for Hg2+ measurement in fish samples using carbon dots/AuNPs as donor/acceptor platform

A novel strategy was proposed for the determination of Hg²⁺ in water, foods, and living organisms based on the quenching and recovery of the fluorescence of CDs-ssDNA through the FRET process induced by AuNPs-cDNA. The results showed a wide response range, pM detection limit, and high selectivity.

Printable Heterostructured Bioelectronic Interfaces with Enhanced Electrode Reaction Kinetics by Intermicroparticle Network

Printable organic bioelectronics provide a fast and cost-effective approach for the fabrication of novel biodevices, while the general challenge is to achieve optimized reaction kinetics at multiphase boundaries between biomolecules and electrodes. Here, we present an entirely new concept based on a modular approach for the construction of heterostructured bioelectronic interfaces by using tailored functional "biological microparticles" combined with "transducer microparticles" as modular building blocks. This approach offers high versatility for the design and fabrication of bioelectrodes with a variety of forms of interparticle spatial organization, from layered-structures to more advance bulk heterostructured architectures. The heterostructured biocatalytic electrodes delivered twice the reaction rate and a six-fold increase in the effective diffusion kinetics in response to a catalytic model using glucose as the substrate, together with the advantage of shortened diffusion paths for reactants between multiple interparticle junctions and large active particle surface. The consequent benefits of this improved performance combined with the simple means of mass production are of major significance for the emerging printed electronics industry.

Sensitive arginine sensing based on inner filter effect of Au nanoparticles on the fluorescence of CdTe quantum dots

Arginine plays an important role in many biological functions, whose detection is very significant. Herein, a sensitive, simple and cost-effective fluorescent method for the detection of arginine has been developed based on the inner filter effect (IFE) of citrate-stabilized gold nanoparticles (AuNPs) on the fluorescence of thioglycolic acid-capped CdTe quantum dots (QDs). When citrate-stabilized AuNPs were mixed with thioglycolic acid-capped CdTe QDs, the fluorescence of CdTe QDs was significantly quenched by AuNPs via the IFE. With the presence of arginine, arginine could induce the aggregation and corresponding absorption spectra change of AuNPs, which then IFE-decreased fluorescence could gradually recover with increasing amounts of arginine, achieving fluorescence "turn on" sensing for arginine. The detection mechanism is clearly illustrated and various experimental conditions were also optimized. Under the optimum conditions, a decent linear relationship was obtained in the range from 16 to 121μgL^-1 and the limit of detection was 5.6μgL^-1. And satisfactory results were achieved in arginine analysis using arginine injection, compound amino acid injection, even blood plasma as samples. Therefore, the present assay showed various merits, such as simplicity, low cost, high sensitivity and selectivity, making it promising for sensing arginine in biological samples.

A turn-on fluorescence aptasensor based on carbon dots for sensitive detection of adenosine

A novel turn-on fluorescence aptasensor was designed for adenosine detection based on FRET from ssDNA-CDs to aptamer-AuNPs.

Ag@Au nanoprism-metal organic framework-based paper for extending the glucose sensing range in human serum and urine

Ag@Au nanoprism-MOFs-based paper for enhancing the glucose sensing range in human serum and in urine.

Lanthanide Coordination Polymer Nanoparticles as an Excellent Artificial Peroxidase for Hydrogen Peroxide Detection

Lanthanide coordination polymer nanoparticles (Ln-CPNs) have been recently demonstrated as excellent platforms for biomolecule detection. In this work, we synthesized novel cerium coordination polymer nanoparticles ATP-Ce-Tris CPNs in a simple and quick way using ATP molecules as the biocompatible ligands to Ce(3+) ions in tris(hydroxymethyl)aminomethane hydrochloric (Tris-HCl) solution. In view of the excellent free radical scavenging property of cerium compounds, which is ascribed to the mixed valence state (Ce(3+), Ce(4+)) and the reversible switch from Ce(3+) to Ce(4+), the synthesized ATP-Ce-Tris CPNs was used as artificial peroxidase to selectively and sensitively detect H2O2. The sensing mechanism depends on the oxidation of the fluorescent ATP-Ce(III)-Tris CPNs to nonfluorescent ATP-Ce(IV)-Tris CPNs by H2O2. Compared with those inorganic cerium oxide sensors, this kind of fluoresence ATP-Ce-Tris CPNs sensor needs no additional organic redox dye, such as ABTS (2,20-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid), TMB (3,3,5,5-tetramethylbenzidine), or fluorescein as signal molecules. Moreover, such ATP-Ce-Tris CPNs sensor exhibited a more sensitive response to H2O2 with a detection limit down to 0.6 nM, which is 2 orders of magnitude lower than those of cerium oxide sensors. This sensing platform was further extended to the detection of glucose in combination with the specific catalytic effect of glucose oxidase (GOx) for the oxidation of glucose and formation of H2O2.

Highly Sensitive Homogeneous Immunoassays Based on Construction of Silver Triangular Nanoplates-Quantum Dots FRET System

With growing concerns about health issues worldwide, elegant sensors with high sensitivity and specificity for virus/antigens (Ag) detection are urgent to be developed. Homogeneous immunoassays (HIA) are an important technique with the advantages of small sample volumes requirement and pretreatment-free process. HIA are becoming more favorable for the medical diagnosis and disease surveillance than heterogeneous immunoassays. An important subset of HIA relies on the effect of fluorescence resonance energy transfer (FRET) via a donor-acceptor (D-A) platform, e.g., quantum dots (QDs) donor based FRET system. Being an excellent plasmonic material, silver triangular nanoplates (STNPs) have unique advantages in displaying surface plasmon resonance in the visible to near infrared spectral region, which make them a better acceptor for pairing with QDs in a FRET-based sensing system. However, the reported STNPs generally exhibited broad size distributions, which would greatly restrict their application as HIA acceptor for high detection sensitivity and specificity purpose. In this work, uniform STNPs and red-emitting QDs are firstly applied to construct FRET nanoplatform in the advanced HIA and further be exploited for analyzing virus Ag. The uniform STNPs/QDs nanoplatform based medical sensor provides a straightforward and highly sensitive method for Ag analysis in homogeneous form.

Colorimetric and fluorescence “turn-on” methods for the sensitive detection of bromelain using carbon dots functionalized gold nanoparticles as a dual probe

Carbon dots were functionalized on the surfaces of gold nanoparticles for the colorimetric and fluorescence detection of bromelain. The limit of detection for bromelain was 18.9 nM and 0.52 nM using UV-visible and fluorescence spectroscopy, respectively.

From the traditional way of pyrolysis to tunable photoluminescent water soluble carbon nano-onions for cell imaging and selective sensing of glucose

Water soluble photoluminescent carbon nano-onions were synthesized from vegetable ghee using traditional pyrolytic approach for imaging cells and selective-immediate detection of glucose via fluorescent “turn-off”/“turn-on” technique.

Paper-based fluorescence resonance energy transfer assay for directly detecting nucleic acids and proteins

Paper-based fluorescence resonance energy transfer assay (FRET) is gaining great interest in detecting macro-biological molecule. It is difficult to achieve conveniently and fast detection for macro-biological molecule. Herein, a graphene oxide (GO)-based paper chip (glass fiber) integrated with fluorescence labeled single-stranded DNA (ssDNA) for fast, inexpensive and direct detection of biological macromolecules (proteins and nucleic acids) has been developed. In this paper, we employed the Cy3/FAM-labeled ssDNA as the reporter and the GO as quencher and the original glass fiber paper as data acquisition substrates. The chip which was designed and fabricated by a cutting machine is a miniature biosensor that monitors fluorescence recovery from resonance energy transfer. The hybridization assays and fluorescence detection were all simplified, and the surface of the chip did not require immobilization or washing. A Nikon Eclipse was employed as excited resource and a commercial digital camera was employed for capturing digital images. This paper-based microfluidics chip has been applied in the detection of proteins and nucleic acids. The biosensing capability meets many potential requirements for disease diagnosis and biological analysis.