Complexation of Aliphatic Ammonium Ions with a Water-Soluble Cucurbit[6]uril Derivative in Pure Water: Isothermal Calorimetric, NMR, and X-ray Crystallographic Study

Biomedical applications of supramolecular hydrogels with enhanced mechanical properties

Supramolecular hydrogels bound by hydrogen bonding, host-guest, hydrophobic, and other non-covalent interactions are among the most attractive biomaterials available. Supramolecular hydrogels have attracted extensive attention due to their inherent dynamic reversibility, self-healing, stimuli-response, excellent biocompatibility, and near-physiological environment. However, the inherent contradiction between non-covalent interactions and mechanical strength makes the practical application of supramolecular hydrogels a great challenge. This review describes the mechanical strength of hydrogels mediated by supramolecular interactions, and focuses on the potential strategies for enhancing the mechanical strength of supramolecular hydrogels and illustrates their applications in related fields, such as flexible electronic sensors, wound dressings, and three-dimensional (3D) scaffolds. Finally, the current problems and future research prospects of supramolecular hydrogels are discussed. This review is expected to provide insights that will motivate more advanced research on supramolecular hydrogels.

Specific Binding of Primary Ammoniums in Aqueous Media by Homooxacalixarenes Incorporated into Micelles

The development of artificial receptors for efficient recognition of analytes in water is a challenging task. Homooxacalix[3]arene-based receptor 1, which is selective toward primary ammoniums in organic solvents, was transferred into water following two different strategies: direct solubilization and micellar incorporation. Extensive ¹H NMR studies showed that recognition of ammoniums is only observed in the case of micellar incorporation, highlighting the beneficial effect of the microenvironment of the micellar core. The selectivity of the system for primary ammoniums over secondary and tertiary ones was also maintained. The hydrophobic effect plays an important role in the recognition properties, which are counterion-dependent due to the energy penalty for the dissociation of certain ammonium salts in the apolar micellar core. This study shows that the straightforward self-assembly process used for the encapsulation of artificial receptors in micelles is an efficient strategy for developing water-soluble nanosized supramolecular recognition systems.

Chemical strategies to engineer hydrogels for cell culture

Two-dimensional and three-dimensional cell culture systems are widely used for biological studies, and are the basis of the organoid, tissue engineering and organ-on-chip research fields in applications such as disease modelling and drug screening. The natural extracellular matrix of tissues, a complex scaffold with varying chemical and mechanical properties, has a critical role in regulating important cellular functions such as spreading, migration, proliferation and differentiation, as well as tissue morphogenesis. Hydrogels are biomaterials that are used in cell culture systems to imitate critical features of a natural extracellular matrix. Chemical strategies to synthesize and tailor the properties of these hydrogels in a controlled manner, and manipulate their biological functions in situ, have been developed. In this Review, we provide the rational design criteria for predictably engineering hydrogels to mimic the properties of the natural extracellular matrix. We highlight the advances in using biocompatible strategies to engineer hydrogels for cell culture along with recent developments to dynamically control the cellular environment by exploiting stimuli-responsive chemistries. Finally, future opportunities to engineer hydrogels are discussed, in which the development of novel chemical methods will probably have an important role.

Supramolecular Host-Guest Hydrogels for Corneal Regeneration

Over 6.2 million people worldwide suffer from moderate to severe vision loss due to corneal disease. While transplantation with allogenic donor tissue is sight-restoring for many patients with corneal blindness, this treatment modality is limited by long waiting lists and high rejection rates, particularly in patients with severe tissue damage and ocular surface pathologies. Hydrogel biomaterials represent a promising alternative to donor tissue for scalable, nonimmunogenic corneal reconstruction. However, implanted hydrogel materials require invasive surgeries and do not precisely conform to tissue defects, increasing the risk of patient discomfort, infection, and visual distortions. Moreover, most hydrogel crosslinking chemistries for the in situ formation of hydrogels exhibit off-target effects such as cross-reactivity with biological structures and/or result in extractable solutes that can have an impact on wound-healing and inflammation. To address the need for cytocompatible, minimally invasive, injectable tissue substitutes, host-guest interactions have emerged as an important crosslinking strategy. This review provides an overview of host-guest hydrogels as injectable therapeutics and highlights the potential application of host-guest interactions in the design of corneal stromal tissue substitutes.

Solid-Supported Amplification of Aggregation Emission: A Tetraphenylethylene-Cucurbit[6]uril@Hydroxyapatite-Based Supramolecular Sensing Assembly for the Detection of Spermine and Spermidine in Human Urine and Blood

The development of sensitive and selective tools for the detection and quantification of biomarkers is important in the diagnosis and treatment of clinical diseases. Spermine (SP) and spermidine (SPD) act as biomarkers for early-stage diagnosis of cancer in humans as their increased levels in urine are indicative of abnormal biological processes associated with this fatal disease. In this study, we introduced a strategy for solid-supported amplification of the effective aggregation-induced-emission (AIE) effect of a water-soluble tetraphenylethylene (TPE)-based probe in developing a supramolecular sensing platform for the rapid, sensitive, and selective detection of SP and SPD in water. The nonemissive TPE derivative (TPEHP) forms a less emissive conjugate with hydroxyl cucurbit[6]uril (CB[6]OH) in water, which undergoes several-fold enhancement of effective emission upon electrostatic interaction with the solid surface of hydroxyapatite nanoparticles (HAp NPs), dispersed in the aqueous media. The corresponding three-component supramolecular assembly disrupts by the intrusion of SP and SPD in the CB[6] portal because of the stronger binding ability with CB[6], resulting in a turn-off fluorescence sensor for SP and SPD with enhanced sensitivity. The assembly-disassembly-based sensing mechanism was thoroughly demonstrated by carrying out isothermal titration calorimetry (ITC), spectroscopic, and microscopic experiments. The sensing system showed low limits of detection (LODs) of 1.4 × 10^-8 and 3.6 × 10^-8 M for SP and SPD, respectively, which are well below the required range for the early diagnosis of cancer. Besides, a good linear relationship was obtained for both SP and SPD. Nominal interference from various metal ions, anions, common chemicals, amino acids, and other biogenic amines makes this sensing platform suitable for the real-time, low-level measurement of spermine (and spermidine) in human urinary and blood samples.

Molecular Recognition in Water Using Macrocyclic Synthetic Receptors

Molecular recognition in water using macrocyclic synthetic receptors constitutes a vibrant and timely research area of supramolecular chemistry. Pioneering examples on the topic date back to the 1980s. The investigated model systems and the results derived from them are key for furthering our understanding of the remarkable properties exhibited by proteins: high binding affinity, superior binding selectivity, and extreme catalytic performance. Dissecting the different effects contributing to the proteins' properties is severely limited owing to its complex nature. Molecular recognition in water is also involved in other appreciated areas such as self-assembly, drug discovery, and supramolecular catalysis. The development of all these research areas entails a deep understanding of the molecular recognition events occurring in aqueous media. In this review, we cover the past three decades of molecular recognition studies of neutral and charged, polar and nonpolar organic substrates and ions using selected artificial receptors soluble in water. We briefly discuss the intermolecular forces involved in the reversible binding of the substrates, as well as the hydrophobic and Hofmeister effects operating in aqueous solution. We examine, from an interdisciplinary perspective, the design and development of effective water-soluble synthetic receptors based on cyclic, oligo-cyclic, and concave-shaped architectures. We also include selected examples of self-assembled water-soluble synthetic receptors. The catalytic performance of some of the presented receptors is also described. The latter process also deals with molecular recognition and energetic stabilization, but instead of binding ground-state species, the targets become elusive counterparts: transition states and other high-energy intermediates.

Site-selective modification of proteins using cucurbit[7]uril as supramolecular protection for N-terminal aromatic amino acids

Cucurbit[7,8]urils are known to form inclusion complexes with aromatic amino acids, hosting the hydrohobic side chains within the cavity and adjacent cations within the portal of the macrocyclic host. Here we show that cucurbit[7]uril binding with N-terminal phenylalanine significantly reduces the nucleophilicity of the amine, likely due to an increase in stability of the ammonium ion, rendering it unreactive at neutral pH. Using insulin as a model protein, we show that this supramolecular protection strategy can drive selectivity of N-terminal amine conjugation away from the preferred B chain N-terminal phenylalanine towards the A chain N-terminal glycine. Cucurbit[7]uril can therefore be used as a supramolecular protecting group for site-selective protein modification.

Encapsulation of ionic liquids inside cucurbiturils

Cucurbit[n]urils (CBn, n = 6-8) serve as molecular receptors for imidazolium-based ionic liquids (ILs) in aqueous solution. The amphiphilic nature of 1-alkyl-3-methylimidazolium guests (Cnmim), with a cationic imidazolium residue and a hydrophobic alkyl chain, enabled their complexation with CBn through a combination of the hydrophobic effect and ion-dipole interactions. 1H NMR experiments revealed that the cavity of CBn can host the hydrophobic chain of the ILs, while one of the carbonyl rims served as a docking site for the imidazolium ring. The structure of the complexes was further analyzed by molecular dynamics (MD) simulations, which indicated that the cavity of CB6 can accommodate up to 5 carbon atoms, while the larger cavity of CB7 and CB8 can encapsulate longer alkyl chains in folded conformations. Isothermal titration calorimetry (ITC) experiments provided up to micromolar affinity of ILs to CBn in aqueous solution, which was independently quantified by indicator displacement titrations.

Supramolecular chemistry of substituted cucurbit[n]urils

This review covers important advances in the field of substituted cucurbit[n]urils.

A near infrared light-triggerable modular formulation for the delivery of small biomolecules

Background

Externally triggered drug delivery systems hold considerable promise for improving the treatment of many diseases, in particular, diseases where the spatial–temporal release of the drug is critical to maximize their biological effect whilst minimizing undesirable, off-target, side effects.

Results

Herein, we developed a light-triggerable formulation that takes advantage of host–guest chemistry to complex drugs functionalized with a guest molecule and release it after exposure to near infrared (NIR) light due to the disruption of the non-covalent host–guest interactions. The system is composed by a gold nanorod (AuNR), which generates plasmonic heat after exposure to NIR, a thin layer of hyaluronic acid immobilized to the AuNR upon functionalization with a macrocycle, cucurbit[6]uril (CB[6]), and a drug functionalized with a guest molecule that interacts with the macrocycle. For proof of concept, we have used this formulation for the intracellular release of a derivative of retinoic acid (RA), a molecule known to play a key role in tissue development and homeostasis as well as during cancer treatment. We showed that the formulation was able to conjugate approximately 65 μg of RA derivative per mg of CB[6] @AuNR and released it within a few minutes after exposure to a NIR laser. Importantly, the bioactivity of RA released from the formulation was demonstrated in a reporter cell line expressing luciferase under the control of the RA receptor.

Conclusions

This NIR light-triggered supramolecular-based modular platform holds great promise for theranostic applications.

Host-Guest Chemistry in Supramolecular Theranostics

Macrocyclic hosts, such as cyclodextrins, calixarenes, cucurbiturils, and pillararenes, exhibit unparalleled advantages in disease diagnosis and therapy over the past years by fully taking advantage of their host-guest molecular recognitions. The dynamic nature of the non-covalent interactions and selective host-guest complexation endow the resultant nanomaterials with intriguing properties, holding promising potentials in theranostic fields. Interestingly, the differences in microenvironment between the abnormal and normal cells/tissues can be employed as the stimuli to modulate the host-guest interactions, realizing the purpose of precise diagnosis and specific delivery of drugs to lesion sites. In this review, we summarize the progress of supramolecular theranostics on the basis of host-guest chemistry benefiting from their fantastic topological structures and outstanding supramolecular chemistry. These state-of-the-art examples provide new methodologies to overcome the obstacles faced by the traditional theranostic systems, promoting their clinical translations.

Supramolecular self-assemblies of inverted cucurbit[7]uril with biogenic amines

The binding interactions between six biogenic amine guests and the iQ[7] host were investigated. The experimental results have revealed that iQ[7] shows strong binding affinity towards five of the studied biogenic amines, but not histamine, and that the binding sites are different depending on the structure of the biogenic amine.

Cucurbit[n]uril-based amphiphiles that self-assemble into functional nanomaterials for therapeutics

In this feature article, the two types (molecular amphiphile and supramolecular amphiphile) of CB-based amphiphiles, their self-assemblies and their applications for useful nanotherapeutics and theranostics are presented with future perspectives.

Supramolecular polymeric biomaterials

Polymeric chains crosslinked through supramolecular interactions-directional and reversible non-covalent interactions-compose an emerging class of modular and tunable biomaterials. The choice of chemical moiety utilized in the crosslink affords different thermodynamic and kinetic parameters of association, which in turn illustrate the connectivity and dynamics of the system. These parameters, coupled with the choice of polymeric architecture, can then be engineered to control environmental responsiveness, viscoelasticity, and cargo diffusion profiles, yielding advanced biomaterials which demonstrate rapid shear-thinning, self-healing, and extended release. In this review we examine the relationship between supramolecular crosslink chemistry and biomedically relevant macroscopic properties. We then describe how these properties are currently leveraged in the development of materials for drug delivery, immunology, regenerative medicine, and 3D-bioprinting (253 references).

Study on the Binding Interaction of the α,α',δ,δ'-Tetramethylcucurbit[6]uril With Biogenic Amines in Solution and the Solid State

1H NMR spectroscopy and MALDI-TOF mass spectrometry were utilized to examine the binding interaction of α,α',δ,δ'-tetramethylcucurbit[6]uril (TMeQ[6]) and six biogenic amines (spermine, spermidine, 2-phenethylamine, tyramine, histamine, and tryptamine). Their 1H NMR spectra both at pD = 7 and pD = 3 revealed that four biogenic amines (spermine, spermidine, 2-phenethylamine, and histamine) can fit in the TMeQ[6] cavity, respectively, and other biogenic amines were located outside of the TMeQ[6] portal. In addition, a solid-state evaluation with single-crystal X-ray diffraction analysis showed the binding interaction of spermine, spermidine, 2-phenethylamine, and tyramine with TMeQ[6].

Crystal structure of octane-1,8-diaminium 4,4'-(diazene-1,2-di-yl)dibenzoate monohydrate

The title salt, C8H22N22+·C14H8N2O42-·H2O, represents a pseudo-polymer ionic material, resulting from the self-organizing behavior of 4,4'-azinodibenzoate dianions and doubly protonated, 1,8-diaminium-octane cations in aqueous solution. The asymmetric unit consists of two halves of octane 1,8-diaminium cations (the complete cations are both generated by crystallographic inversion symmetry), a 4,4'-azinodibenzoate anion [dihedral angle between the aromatic rings = 10.22 (4)°] and a water mol-ecule of crystallization. One of the cations is in a fully extended linear conformation while the second one has a terminal C-C-C-N gauche conformation. In the crystal, the cations, anions and water mol-ecules are linked into a three-dimensional network via a complex pattern of charge-assisted N-H⋯O and O-H⋯O hydrogen bonds.

Attractive Interactions between Heteroallenes and the Cucurbituril Portal

In this paper, we report on the noteworthy attractive interaction between organic azides and the portal carbonyls of cucurbiturils. Five homologous bis-α,ω-azidoethylammonium alkanes were prepared, where the number of methylene groups between the ammonium groups ranges from 4 to 8. Their interactions with cucurbit[6]uril were studied by NMR spectroscopy, IR spectroscopy, X-ray crystallography, and computational methods. Remarkably, while the distance between the portal plane and most atoms at the guest end groups increases progressively with the molecular size, the β-nitrogen atoms maintain a constant distance from the portal plane in all homologues, pointing at a strong attractive interaction between the azide group and the portal. Both crystallography and NMR support a specific electrostatic interaction between the carbonyl and the azide β-nitrogen, which stabilizes the canonical resonance form with positive charge on the β-nitrogen and negative charge on the γ-nitrogen. Quantum computational analyses strongly support electrostatics, in the form of orthogonal dipole-dipole interaction, as the main driver for this attraction. The alternative mechanism of n → π* orbital delocalization does not seem to play a significant role in this interaction. The computational studies also indicate that the interaction is not limited to azides, but generalizes to other isoelectronic heteroallene functions, such as isocyanate and isothiocyanate. This essentially unexploited attractive interaction could be more broadly utilized as a tool not only in relation to cucurbituril chemistry, but also for the design of novel supramolecular architectures.

Self-Healable Supramolecular Hydrogel Formed by Nor-Seco-Cucurbit[10]uril as a Supramolecular Crosslinker

A supramolecular hydrogel was formed by a simple mixing of solutions of nor-seco-cucurbit[10]uril (NS-CB[10]) and adamantylamine-terminated 4-armed polyethylene glycol (AdA-4-arm-PEG). In the formation of the hydrogel, NS-CB[10] acted as a noncovalent crosslinker to form a ternary complex with two AdA moieties. The dynamic and selective nature of the host-guest interaction between NS-CB[10] and AdA enabled the supramolecular hydrogel to rapidly recover its physical properties after it was damaged. In addition, the recovered hydrogel retained its physical properties with negligible differences from those of the pristine material, even after multiple self-healing cycles. The NS-CB[10]-based hydrogel with the self-healing property may be useful for various biological applications such as drug delivery, cell therapy and tissue engineering.

Endo/exo binding of alkyl and aryl diammonium ions by cyclopentanocucurbit[6]uril

Binding interactions of cyclopentanocucurbit[6]uril (CyP₆Q[6]) with a series of alkyl and aryl diammonium ions were investigated. CyP₆Q[6] exhibits endo and exo binding modes with the guests, which depends on the size and shape complementarity between the host and the guests.

Host-guest complexation of di-cyclohexanocucurbit[6]uril and hexa-cyclohexanocucurbit[6]uril with alkyldiammonium ions: a comparative study

The host-guest complexation of symmetrical di-cyclohexanocucurbit[6]uril (Cy2Q[6]) and hexa-cyclohexanocucurbit[6]uril (Cy6Q[6]) with a series of alkyldiammonium ions (H(3+)N(CH(2))nNH(3+), n = 2-8) has been studied both in solution and in the gas phase. (1)H NMR data indicate that all alkyldiammonium ions have inclusion interactions with both hosts except for the ethanediammonium ion. In addition, if the alkyl chain of the alkyldiammonium ion is longer than n = 5 methylene groups, compressed conformation may occur, which depends on the cavity shape of the hosts and the length of the alkyl chain. Isothermal titration calorimetry (ITC) studies point out that the host-guest complexations of both hosts with the latter five alkyldiammonium ions are enthalpically driven. The comparison of the thermodynamic data reveals that the enthalpies of the van der Waals interactions contribute more to the host-guest complexation enthalpy than the ion-dipole interactions. The enthalpic gain arises from the van der Waals interactions and the reduction of entropy upon the host-guest complexation is strongly affected by the cavity shape of the host. Gas phase structures of long alkyldiammonium guests within both hosts are completely different from those in aqueous solution.

Host–guest complexation of HMeQ[7] with alkyldiammonium ions and alkyldiamines: a comparative study

The host–guest complexations of HMeQ[7] with a series of alkyldiammonium ions and alkyldiamines have been investigated, indicating that the driving forces strongly depend on the features of the guests.

Genetically engineered mesenchymal stem cell therapy using self-assembling supramolecular hydrogels

Stem cell therapy has attracted a great deal of attention for treating intractable diseases such as cancer, stroke, liver cirrhosis, and ischemia. Especially, mesenchymal stem cells (MSCs) have been widely investigated for therapeutic applications due to the advantageous characteristics of long life-span, facile isolation, rapid proliferation, prolonged transgene expression, hypo-immunogenicity, and tumor tropism. MSCs can exert their therapeutic effects by releasing stress-induced therapeutic molecules after their rapid migration to damaged tissues. Recently, to improve the therapeutic efficacy, genetically engineered MSCs have been developed for therapeutic transgene expression by viral gene transduction and non-viral gene transfection. In general, the number of therapeutic cells for injection should be more than several millions for effective cell therapy. Adequate carriers for the controlled delivery of MSCs can reduce the required cell numbers and extend the duration of therapeutic effect, which provide great benefits for chronic disease patients. In this review, we describe genetic engineering of MSCs, recent progress of self-assembling supramolecular hydrogels, and their applications to cell therapy for intractable diseases and tissue regeneration.

Self-assembly of nanostructured materials through irreversible covalent bond formation

Over the past decades, numerous efforts have been devoted to synthesizing nanostructured materials with specific morphology because their size and shape play an important role in determining their functions. Self-assembly using weak and reversible interactions or bonds has provided synthetic routes toward various nanostructures because it allows a "self-checking" and "self-error-correcting" process under thermodynamic control. By contrast, the use of irreversible covalent bonds, despite the potential to generate more robust structures, has been disfavored in the synthesis of well-defined nanomaterials largely due to the lack of such self-error-correcting mechanisms. To date, the use of irreversible bonds is largely limited to covalent fixation of preorganized building blocks on a template, which, though capable of producing shape-persistent and robust nanostructured materials, often requires a laborious and time-consuming multistep processes. Constructing well-defined nanostructures by self-assembly using irreversible covalent bonds without help of templates or preorganization of components remains a challenge. This Account describes our recent discoveries and progress in self-assembly of nanostructured materials through strong, practically irreversible covalent bond formation and their applications in various areas including drug delivery, anticancer therapy, and heterogeneous catalysis. The key to the success of this approach is the use of rationally designed building blocks possessing multiple in-plane reactive groups at the periphery. These blocks can then successfully grow into flat oligomeric patches through irreversible covalent bond formation without the aid of preorganization or templates. Further growth of the patches with or without curvature generation drives the system to the formation of polymer nanocapsules, two-dimensional (2D) polymer films, and toroidal nanotubular microrings. Remarkably, the final morphology can be specified by a few simple parameters: the reaction medium, bending rigidity of the system, and orientation of the reactive groups. Theoretical studies support the spontaneous formation of such nanostructured materials in terms of energetics and successfully predict or explain their size distributions. Although the lack of self-error-correcting mechanisms results in defect sites in these nanostructures, the high efficiency and relative simplicity of our novel approach demonstrates the potential power of using irreversible covalent bonds to generate a diverse range of shape-persistent and robust nanostructures that is likely to enrich the repertoire of self-assembled nanomaterials.

Host-Guest Complexes of Flavylium Cations and Cucurbit[7]uril: The Influence of Flavylium Substituents on the Structure and Stability of the Complex

The host-guest complexes formed from six differently substituted flavylium cations and cucurbit[7]uril (CB7) have been characterized by UV/Vis absorption, fluorescence emission and ¹ H NMR spectroscopy. It was observed that all flavylium cations form 1:1 inclusion complexes with association constants that depend on the nature and position of the substituents. The results indicate that CB7 displays higher affinity for more hydrophobic flavylium compounds and for those bearing amino substituents. ¹ H NMR spectroscopy was used to elucidate the structure of the complexes. While for 7-hydroxyflavylium and 4-methyl-7-hydroxyflavylium the phenyl group (ring B) is included within the host's cavity leaving the benzopyrilium group (rings A and C) outside, in 4',7-dihydroxyflavylium and 3',4',7-trihydroxyflavylium the macrocycle shuttles between rings A and B. For compounds with amino substituents it was found that CB7 is attracted towards these groups regardless of their position in ring A or B. In addition, it was observed that the dimethylamino group tends to be positioned near the carbonyl-decorated portal while the diethylamino motif prefers the hydrophobic cavity of CB7.

Synthesis of a novel water-soluble cylindrical macrotricyclic host and its complexation with N-methylquinolinium and N-methylisoquinolinium salts: formation of 1 : 2 complexes in water

A water-soluble cylindrical macrotricyclic host could form 1 : 2 complexes with N-methylquinolinium or N-methylisoquinolinium salts in water solution and in the solid state.

Host-guest chemistry in the gas phase: complex formation of cucurbit[6]uril with proton-bound water dimer

The hydration of cucurbit[6]uril (CB[6]) in the gas phase is investigated using electrospray ionization traveling wave ion mobility mass spectrometry (ESI-TWIM-MS). Highly abundant dihydrated and tetrahydrated species of diprotonated CB[6] are found in the ESI-TWIM-MS spectrum. The hydration patterns of the CB[6] ion and the dissociation patterns of the hydrated CB[6] ion indicate that two water molecules are bound to each other, forming a water dimer in the CB[6] complex. Ion mobility studies combined with the structures calculated by density functional theory suggest that the proton-bound water dimer is present as a Zundel-like structure in the CB[6] portal, forming a hydrogen bond network with carbonyl groups of the CB[6]. When a large guest molecule is bound to a CB[6] portal, water molecules cannot bind to the portal. In addition, the strong binding energy of the water dimer blocks the portal, hindering the insertion of the long alkyl chain of the guest molecule into the CB[6] cavity. With small alkali metal cations, such as Li(+) and Na(+), a single water molecule interacts with the CB[6] portal, forming hydrogen bonds with the carbonyl groups of CB[6]. A highly stable Zundel-like structure of the proton-bound water dimer or a metal-bound water molecule at the CB[6] portal is suggested as an initial hydration process for CB[6], which is only dissolved in aqueous solution with acid or alkali metal ions.

Acid and alkaline dual stimuli-responsive mechanized hollow mesoporous silica nanoparticles as smart nanocontainers for intelligent anticorrosion coatings

The present paper introduces an intelligent anticorrosion coating, based on the mechanized hollow mesoporous silica nanoparticles (HMSs) as smart nanocontainers implanted into the self-assembled nanophase particles (SNAP) coating. As the key component, smart nanocontainers assembled by installing supramolecular nanovalves in the form of the bistable pseudorotaxanes on the external surface of HMSs realize pH-responsive controlled release for corrosion inhibitor, caffeine molecules. The smart nanocontainers encapsulate caffeine molecules at neutral pH, and release the molecules either under acidic or alkaline conditions, which make them spontaneously experience the pH excursions arisen from corrosion process and respond quickly. The intelligent anticorrosion coating was deposited on the surface of aluminum alloy AA2024 and investigated by electrochemical impedance spectroscopy and scanning vibrating electrode technique (SVET). Compared with the pure SNAP coating, the well-dispersed smart nanocontainers not only delay the penetration rate of corrosive species but also repair damaged aluminum oxide layer to maintain the long term anticorrosion behavior. From the experimental results of SVET, the smart nanocontainers with the acid and alkaline dual stimuli-responsive characteristics can simultaneously suppress corrosion activities on microanodic and microcathodic regions, demonstrating an excellent self-healing functionality.

Overcoming dissipation in the calculation of standard binding free energies by ligand extraction

This article addresses calculations of the standard free energy of binding from molecular simulations in which a bound ligand is extracted from its binding site by steered molecular dynamics (MD) simulations or equilibrium umbrella sampling (US). Host-guest systems are used as test beds to examine the requirements for obtaining the reversible work of ligand extraction. We find that, for both steered MD and US, marked irreversibilities can occur when the guest molecule crosses an energy barrier and suddenly jumps to a new position, causing dissipation of energy stored in the stretched molecule(s). For flexible molecules, this occurs even when a stiff pulling spring is used, and it is difficult to suppress in calculations where the spring is attached to the molecules by single, fixed attachment points. We, therefore, introduce and test a method, fluctuation-guided pulling, which adaptively adjusts the spring's attachment points based on the guest's atomic fluctuations relative to the host. This adaptive approach is found to substantially improve the reversibility of both steered MD and US calculations for the present systems. The results are then used to estimate standard binding free energies within a comprehensive framework, termed attach-pull-release, which recognizes that the standard free energy of binding must include not only the pulling work itself, but also the work of attaching and then releasing the spring, where the release work includes an accounting of the standard concentration to which the ligand is discharged.

Controlled release of cargo molecules from hollow mesoporous silica nanoparticles based on acid and base dual-responsive cucurbit[7]uril pseudorotaxanes

The acid and base dual-responsive cucurbit[7]uril pseudorotaxanes have been designed and immobilized on the surface of hollow mesoporous silica nanoparticles as the supramolecular nanovalves to control the release of cargo molecules in response to extensive pH changes.

Free-standing, single-monomer-thick two-dimensional polymers through covalent self-assembly in solution

The design and synthesis of two-dimensional (2D) polymers is a challenging task, hitherto achieved in solution only through the aid of a solid surface "template" or preorganization of the building blocks in a 2D confined space. We present a novel approach for synthesizing free-standing, covalently bonded, single-monomer-thick 2D polymers in solution without any preorganization of building blocks on solid surfaces or interfaces by employing shape-directed covalent self-assembly of rigid, disk-shaped building blocks having laterally predisposed reactive groups on their periphery. We demonstrate our strategy through a thiol-ene "click" reaction between (allyloxy)12CB[6], a cucurbit[6]uril (CB[6]) derivative with 12 laterally predisposed reactive alkene groups, and 1,2-ethanedithiol to synthesize a robust and readily transferable 2D polymer. We can take advantage of the high binding affinity of fully protonated spermine (positive charges on both ends) to CB[6] to keep each individual polymer sheet separated from one another by electrostatic repulsion during synthesis, obtaining, for the first-time ever, a single-monomer-thick 2D polymer in solution. The arrangement of CB[6] repeating units in the resulting 2D polymer has been characterized using gold nanoparticle labeling and scanning transmission electron microscopy. Furthermore, we have confirmed the generality of our synthetic approach by applying it to different monomers to generate 2D polymers. Novel 2D polymers, such as our CB[6] derived polymer, may be useful in selective transport, controlled drug delivery, and chemical sensing and may even serve as well-defined 2D scaffolds for ordered functionalization and platforms for bottom-up 3D construction.