Inhibition of the in vitro replication of DNA by an aptamer-protein complex in an autonomous DNA machine

Dictated Emergence of Nucleic Acid-Based Constitutional Dynamic Networks by DNA Replication Machineries

The emergence of nucleic acid-based constitutional dynamic networks, CDNs, from a pool of nucleic acids is a key process for the understanding and modality of the evolution of biological networks. We present a versatile method that applies a library of nucleic acids coupled to biocatalytic DNA machineries as functional modules for the emergence of CDNs of diverse composition, complexity, and structural diversity. A set of four DNA template/blocker scaffolds coupled to the polymerase/dNTP replication machinery leads, in the presence of a primer, P₁, to the gated replication of the scaffolds and to the displacement of four components that reconfigure into a [2 × 2] CDN. Using six template/blocker scaffolds and the polymerase/dNTPs, the P₁-guided emergence of a [3 × 3] CDN is demonstrated. In addition, by further engineering the template/blocker scaffolds, the hierarchical control over the composition of the P₁-guided emergence of [3 × 3] CDNs is accomplished. Also, sequence-engineered template/blocker scaffolds, coupled to the polymerase/dNTP machinery, lead, in the presence of two primers P₁ and/or P₂, to the selective emergence of two different [2 × 2] CDNs or to a [3 × 3] CDN. Also, a set of six appropriately engineered template/blocker scaffolds, coupled to the polymerase/dNTP machinery, leads to the emergence of a CDN composed of four equilibrated DNA tetrahedra constituents. Finally, by further sequence engineering of the set of template/blocker scaffolds and their coupling to a nicking/polymerization/dNTP replication machinery, the amplified high-throughput emergence of CDNs is demonstrated.

Protein-Mediated Suppression of Rolling Circle Amplification for Biosensing with an Aptamer-Containing DNA Primer

We report a method to detect proteins via suppression of rolling circle amplification (RCA) by using an appropriate aptamer as the linear primer (denoted as an aptaprimer) to initiate RCA. In the absence of a protein target, the aptaprimer is free to initiate RCA, which can produce long DNA products that are detected via binding of a fluorescent intercalating dye. Introduction of a target causes the primer region within the aptamer to become unavailable for binding to the circular template, inhibiting RCA. Using SYBR Gold or QuantiFluor dyes as fluorescent probes to bind to the RCA reaction product, it is possible to produce a generic protein-modulated RCA assay system that does not require fluorophore- or biotin-modified DNA species, substantially reducing complexity and cost of reagents. Based on this modulation of RCA, we demonstrate the ability to produce both solution and paper-based assays for rapid and quantitative detection of proteins including platelet derived growth factor and thrombin.

Isothermal Nucleic Acid Amplification Techniques and Their Use in Bioanalysis

Recently, there has been a rapid progress in the development of techniques for isothermal amplification of nucleic acids as an alternative to polymerase chain reaction (PCR). The advantage of these methods is that the nucleic acids amplification can be carried out at constant temperature, unlike PCR, which requires cyclic temperature changes. Moreover, isothermal amplification can be conducted directly in living cells. This review describes the principles of isothermal amplification techniques and demonstrates their high efficiency in designing new highly sensitive detection methods of nucleic acids and enzymes involved in their modifications. The data on successful application of isothermal amplification methods for the analysis of cells and biomolecules with the use of DNA/RNA aptamers are presented.

Application of Antibody-Powered Triplex-DNA Nanomachine to Electrochemiluminescence Biosensor for the Detection of Anti-Digoxigenin with Improved Sensitivity Versus Cycling Strand Displacement Reaction

The accurate and rapid quantitative detection of antibodies had a significant influence in controlling and preventing disease or toxin outbreaks. In this work, we first introduce the antibody-powered triplex-DNA nanomachine to release cargo DNA as a substitute target for sensitive electrochemiluminescence (ECL) detection of anti-digoxigenin based on a novel ternary ECL system. It is worth noting that the cargo DNA as a substitute target of antibody can further participate in an enzyme-assisted cycling strand displacement reaction to achieve ECL signal amplification and improve the sensitivity of antibody detection. Additionally, porous palladium nanospheres with a considerable catalytic activity were first applied as a coreaction accelerator to efficiently enhance the intensity of the ECL system of rubrene microblocks as luminophore and dissolved O₂ as an endogenous coreactant. With the resultant ternary ECL system as a biosensing platform, a significantly enhanced initial signal was achieved in advance. Then, the ferrocene-labeled quenching probes were employed to reduce initial signal and obtain the low-background signal. Eventually, the cargo DNA made the quenching probes release and recover the signal in the presence of anti-digoxigenin. Thereupon, the wide linear range (0.01-200 nM) and low limit of detection (6.7 pM) were obtained, and this method not only reduces conjugation steps but also provides a sensitive and novel ECL analysis platform for the trace detection of other antibodies and antigen.

Ultrasonic irradiation enhanced the ability of Fluorescein-DA-Fe(III) on sonodynamic and sonocatalytic damages of DNA molecules

The interaction of DNA with Bis [N,N-bis (carboxymethyl) aminomethyl] fluorescein-Ferrous(III) (Fluorescein-DA-Fe(III)) with dual functional (sonodynamic and sonocatalytic) activity was studied by UV-vis spectroscopy, fluorescence spectroscopy, FT-IR spectroscopy, circular dichroism (CD) spectroscopy and viscosity measurements. And then, the damage of DNA caused by Fluorescein-DA-Fe(III) under ultrasonic irradiation (US) was researched by agarose gel electrophoresis and cytotoxicity assay. Meanwhile, some influenced factors such as ultrasonic irradiation time and Fluorescein-DA-Fe(III) concentration on the damage degree of DNA molecules were also examined. As a control, for Bis [N,N-bis (carboxymethyl) aminomethyl] fluorescein (Fluorescein-DA), the same experiments were carried out. The results showed that both Fluorescein-DA-Fe(III) and Fluorescein-DA can interact with DNA molecules. Under ultrasonic irradiation, Fluorescein-DA shows sonodynamic activity, which can damage DNA molecules. While, in the presence of Fe(III) ion, the Fluorescein-DA-Fe(III) displays not only sonodynamic activity but also sonocatalytic activity under ultrasonic irradiation, which injures DNA more serious than Fluorescein-DA. The researches confirmed the dual function (sonodynamic activity and sonocatalytic activity) of Fluorescein-DA-Fe(III) and expanded the usage of Fluorescein-DA-Fe(III) as a sonosensitizer in sonodynamic therapy (SDT).

DNA-based nanoscale walking devices and their applications

Herein we review DNA-based nanoscale walking devices including unipedal, bipedal, multipedal, and other novel walking devices and their applications.

Silver Nanoclusters Beacon as Stimuli-Responsive Versatile Platform for Multiplex DNAs Detection and Aptamer-Substrate Complexes Sensing

An activatable silver nanoclusters beacon (ASNCB) was synthesized through a facile one-pot approach and applied for multiplex DNAs, small molecule, and protein sensing. Multifunctional single-stranded DNA sequences are rationally designed and used for ASNCB in situ synthesis. Via target-responsive structure transformation of ASNCB, target recognition induced ASNCB conformational transition and lit up the fluorescent signal of silver nanoclusters. By further implementing two different color ASNCBs (520 and 600 nm), the parallel multiplexed analysis of two target genes (Influenza A virus genes H1N1 and H5N1) is achieved. Additionally, with the introduction of aptamer for the design of the molecular beacon, the detections of small molecule adenosine triphosphate (ATP) and biomacromolecule thrombin have also been realized. This is the first time that an activatable fluorescent silver nanoclusters (Ag NCs)-based probe and the target recognition have been integrated into a single process, which provides a versatile platform for different analytes in a facile way. The successful application of our proposed ASNCB in real sample analysis and ATP imaging in living cells further displayed its promising potential for fluorescence sensing.

Luminescence switch-on assay of interferon-gamma using a G-quadruplex-selective iridium(III) complex

In this study, we synthesized a series of 9 luminescent iridium(III) complexes and studied their ability to function as luminescent probes for G-quadruplex DNA. The iridium(III) complex 8 [Ir(pbtz)2(dtbpy)]PF6 (where pbtz = 2-phenylbenzo[d]thiazole; dtbpy = 4,4'-di-tert-butyl-2,2'-bipyridine) showed high selectivity for G-quadruplex DNA over single-stranded and double-stranded DNA, and was subsequently utilized for the development of a label-free oligonucleotide-based assay for interferon-gamma (IFN-γ), an important biomarker for a range of immune and infectious diseases, in aqueous solution. We further demonstrated that this assay could monitor IFN-γ levels even in the presence of cellular debris. This assay represents the first G-quadruplex-based assay for IFN-γ detection described in the literature.

A plasmonic aptasensor for ultrasensitive detection of thrombin via arrested rolling circle amplification

A sensitive signal generation mechanism for gold nanoparticle growth by reducing gold ions with hydrogen peroxide is applied in a plasmonic aptasensor, achieving naked-eye detection of thrombin at the single-molecule level based on the specific interaction of aptamer-thrombin via an arrested rolling circle amplification to yield horseradish peroxidase (HRP)-mimicking DNAzymes as biocatalysts.

A universal sensing platform based on the repair ligation-mediated light-producing DNA machine

The repair ligation-mediated light-producing DNA machine can produce light through transforming the repetitive DNA cleavage/ligation motions into optical energy without the requirement of either external reporting reagents or excitation light, and it can be applied for sensitive and selective detection of DNA, thrombin, adenosine, potassium ions (K(+)) and endonuclease even in human serum.

Three label-free thrombin aptasensors based on aptamers and [Ru(bpy)2(o-mopip)]2+

The label free aptasensor based on an aptamer pair and [Ru(bpy)₂(o-mopip)]²⁺–GO has been successfully applied to sandwich assays for thrombin detection.

Enzyme-Operated DNA-Based Nanodevices

Functional molecular nanodevices and nanomachines have attracted a growing interest for their potential use in life science and nanomedicine. In particular, due to their versatility and modularity DNA-based nanodevices appear extremely promising. However, a limitation of such devices is represented by the limited number of molecular stimuli and cues that can be used to control and regulate their function. Here we demonstrate the possibility to rationally control and regulate DNA-based nanodevices using biocatalytic reactions catalyzed by different enzymes. To demonstrate the versatility of our approach, we have employed three model DNA-based systems and three different enzymes (belonging to several classes, i.e., transferases and hydrolases). The possibility to use enzymes and enzymatic substrates as possible cues to operate DNA-based molecular nanodevices will expand the available toolbox of molecular stimuli to be used in the field of DNA nanotechnology and could open the door to many applications including enzyme-induced drug delivery and enzyme-triggered nanostructures assembly.

A label-free G-quadruplex-based mercury detection assay employing the exonuclease III-mediated cleavage of T-Hg2+-T mismatched DNA

We report herein the use of an exonuclease III and G-quadruplex probe to construct a G-quadruplex-based luminescence detection platform for Hg2+. Unlike common DNA-based Hg2+ detection methods, when using the dsDNA probe to monitor the hairpin formation, the intercalation of the dsDNA probe may be influenced by the distortion of dsDNA. This 'mix-and-detect' methodology utilized the G-quadruplex probe as the signal transducer and is simple, rapid, convenient to use and can detect down to 20 nM of Hg2+.

Electronic control of DNA-based nanoswitches and nanodevices

Here we demonstrate that we can rationally and finely control the functionality of different DNA-based nanodevices and nanoswitches using electronic inputs. To demonstrate the versatility of our approach we have used here three different model DNA-based nanoswitches triggered by heavy metals and specific DNA sequences and a copper-responsive DNAzyme. To achieve electronic-induced control of these DNA-based nanodevices we have applied different voltage potentials at the surface of an electrode chip. The applied potential promotes an electron-transfer reaction that releases from the electrode surface a molecular input that ultimately triggers the DNA-based nanodevice. The use of electronic inputs as a way to finely activate DNA-based nanodevices appears particularly promising to expand the available toolbox in the field of DNA nanotechnology and to achieve a better hierarchical control of these platforms.

Isothermal Amplification of Nucleic Acids

Isothermal amplification of nucleic acids is a simple process that rapidly and efficiently accumulates nucleic acid sequences at constant temperature. Since the early 1990s, various isothermal amplification techniques have been developed as alternatives to polymerase chain reaction (PCR). These isothermal amplification methods have been used for biosensing targets such as DNA, RNA, cells, proteins, small molecules, and ions. The applications of these techniques for in situ or intracellular bioimaging and sequencing have been amply demonstrated. Amplicons produced by isothermal amplification methods have also been utilized to construct versatile nucleic acid nanomaterials for promising applications in biomedicine, bioimaging, and biosensing. The integration of isothermal amplification into microsystems or portable devices improves nucleic acid-based on-site assays and confers high sensitivity. Single-cell and single-molecule analyses have also been implemented based on integrated microfluidic systems. In this review, we provide a comprehensive overview of the isothermal amplification of nucleic acids encompassing work published in the past two decades. First, different isothermal amplification techniques are classified into three types based on reaction kinetics. Then, we summarize the applications of isothermal amplification in bioanalysis, diagnostics, nanotechnology, materials science, and device integration. Finally, several challenges and perspectives in the field are discussed.

Ultrasensitive and feasibly achieved protein detection based on the integration of three signal amplification reactions via sharing a DNA sequence

This communication reports a novel strategy for the detection of proteins based on the integration of three signal amplification reactions via sharing a specially designed DNA sequence. This strategy has been demonstrated by the assay of human TNF-α in the serum of ovarian cancer patients, showing potential clinical applications.

Luminescence switch-on detection of protein tyrosine kinase-7 using a G-quadruplex-selective probe

A series of luminescent iridium(iii) complexes were synthesised and evaluated for their ability to act as luminescent G-quadruplex-selective probes. The iridium(iii) complex 9 [Ir(pbi)2(5,5-dmbpy)]PF6 (where pbi = 2-phenyl-1H-benzo[d]imidazole; 5,5-dmbpy = 5,5'-dimethyl-2,2'-bipyridine) exhibited high luminescence for G-quadruplex DNA compared to dsDNA and ssDNA, and was employed to construct a G-quadruplex-based assay for protein tyrosine kinase-7 (PTK7) in aqueous solution. PTK7 is an important biomarker for a range of leukemias and solid tumors. In the presence of PTK7, the specific binding of the sgc8 aptamer sequence triggers a structural transition and releases the G-quadruplex-forming sequence. The formation of the nascent G-quadruplex structure is then detected by the G-quadruplex-selective iridium(iii) complex with an enhanced luminescent response. Moreover, the application of the assay for detecting PTK7 in cellular debris and membrane protein extract was demonstrated. To our knowledge, this is the first G-quadruplex-based assay for PTK7.

G-quadruplex-based logic gates for HgII and AgI ions employing a luminescent iridium(iii) complex and extension of metal-mediated base pairs by polymerase

We report herein the synthesis of a series of cyclometallated iridium(iii) complexes as luminescent G-quadruplex-selective probes to construct AND, OR and INHIBIT logic gates for the detection of Hg^II and Ag^I ions.

New molecular beacon for p53 gene point mutation and significant potential in serving as the polymerization primer

Molecular beacon (MB) is usually explored as a convenient probe for various bioassays. In an enzymatic polymerization-based biosensing system, primer, and MB, sometimes involving other oligonucleotides, are often required to collaboratively generate an amplified fluorescent signal to detect target molecules with high sensitivity and specificity. In the current study, a multifunctional primer-integrated MB (MP-MB) was developed to detect the p53 tumor suppressor gene. Compared with the traditional MB, our MP-MB can not only selectively identify the target of interest and signal sensitively its hybridization event, but also act as the primer during enzymatic polymerization. Specifically, hybridization of MP-MB to target p53 gene restored the fluorescence intensity and activated the pre-locked primer designed by changing the molecular configuration of MP-MB. Moreover, the p53 gene could be detected down to 1nM with a linear response range of 1×10(-9)-3×10(-7)M, and p53 gene point mutation was readily distinguished from the wild-type one. Its potential application as a primer of replication in enzymatic polymerization-based assay systems was validated by running parallel gel electrophoreses in comparison with the native counterpart of MP-MB without any chemical modification. Owning to its excellent assay characteristics, less species requirement, broad sequence diversity and preserved intrinsic bioactivity, the proof-of-concept of MP-MB exhibits a great potential in various biomedical applications.

Rational design of pH-controlled DNA strand displacement

Achieving strategies to finely regulate with biological inputs the formation and functionality of DNA-based nanoarchitectures and nanomachines is essential toward a full realization of the potential of DNA nanotechnology. Here we demonstrate an unprecedented, rational approach to achieve control, through a simple change of the solution's pH, over an important class of DNA association-based reactions. To do so we took advantage of the pH dependence of parallel Hoogsteen interactions and rationally designed two triplex-based DNA strand displacement strategies that can be triggered and finely regulated at either basic or acidic pHs. Because pH change represents an important input both in healthy and pathological biological pathways, our findings can have implication for the development of DNA nanostructures whose assembly and functionality can be triggered in the presence of specific biological targets.

Label-free triple-helix aptamer as sensing platform for "signal-on" fluorescent detection of thrombin

The design of a label-free aptamer for separation of recognition sequence from signal reporter is significant to ensure the high-efficiency affinity between aptamer and target. This work develops a label-free triple-helix aptamer (THA) as sensing platform for "signal-on" fluorescent detection of thrombin. THA was composed of aptamer sequence and help DNA 1 (H1), which contained the complementary sequence of hexachloro-fluorescein (HEX) labeled help DNA 2 (H2). The specific recognition event between aptamer and thrombin triggered the dismission of THA to release H1. The released H1 then reacted with the signal probe of H2/graphene oxide (GO) nanocomposite to form H1-H2 duplex, leading to the fluorescence recovery of H2 due to the detachment of H1-H2 duplex from the surface of GO. With employment of THA as a signal transducer and GO as a "superquencher", this method shows a sensitive response to thrombin with a wide concentration range from 5 to 1200 nM. The limit of detection is 1.8 nM (S/N=3) with excellent selectivity. Considering the universality of THA, the proposed aptasensor would provide a platform for homogeneous fluorescent detection of a wide range of analytes.

Prussian blue-Au nanocomposites actuated hemin/G-quadruplexes catalysis for amplified detection of DNA, Hg2+ and adenosine triphosphate

In this paper, horseradish peroxidase-mimicking DNAzyme (HRP-DNAzyme) and Prussian blue (PB)-gold (Au) nanocomposites were designed as versatile electrochemical sensing platforms for the amplified detection of DNA, Hg(2+) and adenosine triphosphate (ATP). By the conjugation of the target probe with the capture probe, a conformational change resulted in the formation of HRP-DNAzyme on the PB-Au modified electrode. The redox of HRP-DNAzyme (red) was efficiently carried out in the presence of H2O2, in which PB acted as a mediator stimulating the biocatalytic functions of HRP-DNAzyme and actuated a catalytic cycle bringing an amplified signal. Specific recognition of the target DNA, Hg(2+) and ATP allowed selective amperometric detection of the target molecule. The detection limits of DNA, Hg(2+) and ATP were 50 nM, 30 pM and 3 nM, respectively. The highlight of this work is that the catalytic cycle between PB-Au nanocomposites and HRP-DNAzyme was adequately utilized in the amplification platform for versatile sensing. The novel electrocatalytic biosensor involving only one-step incubation exhibited a wide linear range, low detection limit, and satisfactory selectivity and operational stability. The proposed approach provided an ease-of-use and universal reporting system with a simple design and easy operations.

Enzymatic cascade based fluorescent DNAzyme machines for the ultrasensitive detection of Cu(II) ions

A novel enzymatic cascade based fluorescent DNAzyme machine has been developed for the amplified detection of copper (Cu(2+)) ions. This is the first attempt to carry out the combination of the self-cleaving DNAzyme and the polymerase/endonuclease reaction cycles involving cleaved substrate extension. In the presence of Cu(2+) ions, the enzyme strand carries out catalytic reactions to hydrolytic cleavage of the substrate strand. The cleaved DNAzyme substrates act as primers and trigger the Klenow Fragment polymerization. Nb.BbvCI endonuclease cuts the double-stranded niking site and thus opens a new site for a new replication. The replication regenerates the complete dsDNA to initiate another cycle of nicking, polymerization and displacement. Finally the fluorescence dye, SG, inserts into the DNA double helix to generate a distinguishable fluorescence enhancement. The Cu(2+) ions act as the activator for enzymatic cascade amplification generating multiple duplex structures in the nascent product. An increasing fluorescence is observed with increasing Cu(2+) ions concentration. A good nonlinear correlation (R=0.9997) was obtained between fluorescence intensity and the cubic logarithm of the Cu(2+) ions concentration over the range 0.50-200 nM. This nonlinear response phenomenon results in an efficient improvement of the sensitivity of our current proposed assay. The activation of such enzymatic cascades through analyte-DNAzyme interactions is not only valuable to activate the cooperation of enzyme networks, but also has a substantial impact on the development of amplified DNAzyme sensors.

A G-quadruplex-based platform for the detection of Hg2+ ions using a luminescent iridium(iii) complex

We report herein the synthesis of a series of cyclometalated iridium(iii) complexes as luminescent G-quadruplex-selective probes, which were used to construct an oligonucleotide-based platform for the dual detection and removal of Hg²⁺ ions.

Graphene oxide/nucleic-acid-stabilized silver nanoclusters: functional hybrid materials for optical aptamer sensing and multiplexed analysis of pathogenic DNAs

Hybrid systems consisting of nucleic-acid-functionalized silver nanoclusters (AgNCs) and graphene oxide (GO) are used for the development of fluorescent DNA sensors and aptasensors, and for the multiplexed analysis of a series of genes of infectious pathogens. Two types of nucleic-acid-stabilized AgNCs are used: one type includes the red-emitting AgNCs (616 nm) and the second type is near-infrared-emitting AgNCs (775 nm). Whereas the nucleic-acid-stabilized AgNCs do not bind to GO, the conjugation of single-stranded nucleic acid to the DNA-stabilized AgNCs leads to the adsorption of the hybrid nanostructures to GO and to the fluorescence quenching of the AgNCs. By the conjugation of oligonucleotide sequences acting as probes for target genes, or as aptamer sequences, to the nucleic-acid-protected AgNCs, the desorption of the probe/nucleic-acid-stabilized AgNCs from GO through the formation of duplex DNA structures or aptamer-substrate complexes leads to the generation of fluorescence as a readout signal for the sensing events. The hybrid nanostructures are implemented for the analysis of hepatitis B virus gene (HBV), the immunodeficiency virus gene (HIV), and the syphilis (Treponema pallidum) gene. Multiplexed analysis of the genes is demonstrated. The nucleic-acid-AgNCs-modified GO is also applied to detect ATP or thrombin through the release of the respective AgNCs-labeled aptamer-substrate complexes from GO.

Real time in vitro regulation of DNA methylation using a 5-fluorouracil conjugated DNA-based stimuli-responsive platform

DNA methylation, catalyzed by methylases, plays a critical role in many biological processes, and many methylases have been regarded as promising targets for antimicrobial drugs. In this work, we report a stimulus responsive, self-regulating anticancer drug release platform, comprising a multifunctional DNA that upon methylation by methyltransferase (MTase) releases 5-fluorouracil (5-Fu) and in turn inhibits subsequent expression of MTase. The multifunctional DNA with anticancer drug are first methylated by DNA adenine methylation (DAM) methyltransferase (MTase) and then cut by the methylation-sensitive restriction endonuclease Dpn I. Removal of duplex from the functional DNA by the methylation/cleavage process will release the anticancer drug, resulting in inhibition of the activity of DAM in turn. Consequently, the enzyme activity of DAM MTase can be self-regulated. Furthermore, we found that the inhibition efficiency of 5-Fu significantly increase as it is functionalized with DNA.

In situ amplification signaling-based autonomous aptameric machine for the sensitive fluorescence detection of cocaine

The development of autonomous DNA machines and their use for specific sensing purpose have recently attracted considerable research attention. In existing autonomous machines, the target recognition process and signal transduction are separated from each other. This results in misunderstanding of the operation behavior, and the assay capability is compromised when serving as a sensing tool. In this communication, the integrated signal transduction-based autonomous aptameric machine, in which the recognition element and signal reporters are integrated into a DNA strand, is developed. This new machine can execute the in situ amplification of target binding-induced signal. The authentic operation behavior of autonomous DNA machine is discovered: the machine's products directly hybridize to the "track" rather than to the signaling probes. Along this line, the machine is employed to detect the cocaine in a more straightforward fashion, and improved assay characteristics (for example, the dynamic response range is widened by more than 500-fold) are achieved. Our efforts not only clarify the concept described in traditional autonomous DNA machines but also have made technological advancements that are expected to be especially valuable in designing nucleic acid-based machines employed in basic research and medical diagnosis.

Enhancing the sensitivity of aptameric detection of lysozyme with a "feed-forward" network of DNA-related reaction cycles

In this study, a network of DNA-related reaction cycles was established to enhance the sensitivity of lysozyme detection with dual signal amplification, and aptamer-based reactions were integrated into this system to provide high specificity. The network was organized in a feed-forward manner: the "upstream cycles" recognized the lysozyme (the target) and released the "messenger strands" from probe A (a DNA construct); the "downstream cycles" received them and then released the "signal strands" from another DNA construct, probe B, in multiplied quantities to that of the original inputted lysozyme. The upstream cycles centered on "target-displacement polymerization", which circulates the lysozyme to provide primary amplification; the downstream cycles centered on "strand-displacement polymerization", which circulates the messenger strand to provide further amplification. There were also several "nicking-polymerization" cycles in both reaction groups that provide extra signal amplification. In total, the network enclosed eight interconnected and autonomic reaction cycles, with only two probes, two primers, and two enzymes needed as raw feeds, and the network can be operated simply in one-pot mode. With this network, lysozyme could be quantified at lysozyme concentrations as low as 2.0×10(-14) M, with a detection limit of 3.6×10(-15) M (3σ rule), which was seven orders of magnitude lower than that obtained without any amplification(1.8×10(-8) M). Detection of lysozyme in real serum samples confirmed the reliability and practicality of the assay based on this reported reaction network.

An aptazyme-based molecular device that converts a small-molecule input into an RNA output

We describe the construction of an aptazyme-based molecular device that converts, through a cascade of reactions, a small-molecule input into output RNA strands. This device is applicable as an interface between a small molecule and a molecular system that accepts only nucleic acid input.

Label-free and amplified electrochemical detection of cytokine based on hairpin aptamer and catalytic DNAzyme

In this work, by incorporating a specific DNAzyme sequence into a hairpin aptamer probe, we describe a label-free and sensitive method for electrochemical detection of cytokines using recombinant human IFN-γ as the model analyte. The hairpin aptamer probes are immobilized on a gold electrode through self-assembly. The presence of IFN-γ opens the hairpin structure and forms the hemin/G-quadruplex peroxidase-mimicking DNAzyme with subsequent addition of hemin. The peroxidase-mimicking DNAzyme catalyzes the electro-reduction of H(2)O(2) and amplifies the current response for IFN-γ detection, which enables the monitoring of IFN-γ at the sub-nanomolar level. The proposed sensor also shows high selectivity towards the target analyte. Our strategy thus opens new opportunities for label-free and amplified detection of different types of cytokines.

Nicking enzyme based homogeneous aptasensors for amplification detection of protein

A simple and highly sensitive homogeneous aptasensor is developed, which relies on nicking enzyme. The sensitivity of this newly proposed aptasensor is about three orders of magnitude higher than that of traditional homogeneous aptasensors. Furthermore, it is capable of detecting target protein in real samples.

Label-free optical bifunctional oligonucleotide probe for homogeneous amplification detection of disease markers

Oligonucleotide-based detection schemes that avoid chemical modification possess significant advantages, including simplified design, intrinsic affinity for targets, low cost and ease to extend applications. In this contribution, we developed a label-free self-locked bifunctional oligonucleotide probe (signaling probe) for the detection of different disease markers in parallel. Two signal enhancement techniques based on isothermal circular strand-displacement polymerization reaction, cyclical nucleic acid strand-displacement polymerization (CNDP) and cyclical common (nonnucleic acid) target-displacement polymerization (CCDP), were employed to implement the amplification assay for p53 gene and PDGF-BB, respectively. The attractive assay properties confirmed the effectiveness of isothermal polymerization in common biosensing systems without evolving any chemical modification: PDGF could be detected down to 0.87ng/mL, and a dynamic response range of 8-5000ng/mL was achieved; The capability to screen the p53 gene was also considerably improved, including the detection limit, sensitivity, dynamic range and so on. Moreover, because no any chemical modification of the signaling probe was acquired and different targets were separately detected in homogeneous solution. This interrogating platform exhibits the design flexibility, convenience, simplicity and cost-effectiveness. The success achieved here is expected to serve as a significant step toward the development of robust label-free oligonucleotide probes in biomarker profiling and disease diagnostics.