Size-dependent reactivity of VnO+ (n = 1-9) clusters with ethane

Cost-effective and readily accessible 3d transition metals (TMs) have been considered as promising candidates for alkane activation while 3d TMs especially the early TMs are usually not very reactive with light alkanes. In this study, the reactivity of Vn+ and VnO+ (n = 1-9) cluster cations towards ethane under thermal collision conditions has been investigated using mass spectrometry and density functional theory calculations. Among Vn+ (n = 1-9) clusters, only V3-5+ can react with C2H6 to generate dehydrogenation products and the reaction rate constants are below 10-13 cm3 molecule-1 s-1. In contrast, the reaction rate constants for all VnO+ (n = 1-9) with C2H6 significantly increase by about 2-4 orders of magnitude. Theoretical analysis evidences that the addition of ligand O affects the charge distribution of the metal centers, resulting in a significant increase in the cluster reactivity. The analysis of frontier orbitals indicates that the agostic interaction determines the size-dependent reactivity of VnO+ cluster cations. This study provides a novel approach for improving the reactivity of early 3d TMs.

Activation and Transformation of Methane on Boron-Doped Cobalt Oxide Cluster Cations CoBO2. Inorg Chem 2024;63:1537-1542. [PMID: 38181068 DOI: 10.1021/acs.inorgchem.3c03112] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

The cleavage of inert C-H bonds in methane at room temperature and the subsequent conversion into value-added products are quite challenging. Herein, the reactivity of boron-doped cobalt oxide cluster cations CoBO2+ toward methane under thermal collision conditions was studied by mass spectrometry experiments and quantum-chemical calculations. In this reaction, one H atom and the CH3 unit of methane were transformed separately to generate the product metaboric acid (HBO2) and one CoCH3+ ion, respectively. Theoretical calculations strongly suggest that a catalytic cycle can be completed by the recovery of CoBO2+ through the reaction of CoCH3+ with sodium perborate (NaBO3), and this reaction generates sodium methoxide (CH3ONa) as the other value-added product. This study shows that boron-doped cobalt oxide species are highly reactive to facilitate thermal methane transformation and may open a way to develop more effective approaches for methane (CH4) activation and conversion under mild conditions.

Methane Activation by [AlFeO3 ]+ : the Hidden Spin Selectivity

The performance of heteronuclear cluster [AlFeO3 ]+ in activating methane has been explored by a combination of high-level quantum chemical calculations with gas-phase experiments. At room temperature, [AlFeO3 ]+ is a mixture of 7 [AlFeO3 ]+ and 5 [AlFeO3 ]+ , in which two states lead to different reactivity and chemoselectivity for methane activation. While hydrogen extracted from methane is the only product channel for the 7 [AlFeO3 ]+ /CH4 couple, 5 [AlFeO3 ]+ is able to convert this substrate to formaldehyde. In addition, the introduction of an external electric field may regulate the reactivity and product selectivity. The interesting doping effect of Fe and the associated electronic origins are discussed, which may guide one on the design of Fe-involved catalyst for methane conversion.

Designing main-group catalysts for low-temperature methane combustion by ozone

The catalytic combustion of methane at a low temperature is becoming increasingly key to controlling unburned CH₄ emissions from natural gas vehicles and power plants, although the low activity of benchmark platinum-group-metal catalysts hinders its broad application. Based on automated reaction route mapping, we explore main-group elements catalysts containing Si and Al for low-temperature CH₄ combustion with ozone. Computational screening of the active site predicts that strong Brønsted acid sites are promising for methane combustion. We experimentally demonstrate that catalysts containing strong Bronsted acid sites exhibit improved CH₄ conversion at 250 °C, correlating with the theoretical predictions. The main-group catalyst (proton-type beta zeolite) delivered a reaction rate that is 442 times higher than that of a benchmark catalyst (5 wt% Pd-loaded Al₂O₃) at 190 °C and exhibits higher tolerance to steam and SO₂. Our strategy demonstrates the rational design of earth-abundant catalysts based on automated reaction route mapping.

Transition metal oxide complexes as molecular catalysts for selective methane to methanol transformation: any prospects or time to retire?

Transition metal oxides have been extensively used in the literature for the conversion of methane to methanol. Despite the progress made over the past decades, no method with satisfactory performance or economic viability has been detected. The main bottleneck is that the produced methanol oxidizes further due to its weaker C-H bond than that of methane. Every improvement in the efficiency of a catalyst to activate methane leads to reduction of the selectivity towards methanol. Is it therefore prudent to keep studying (both theoretically and experimentally) metal oxides as catalysts for the quantitative conversion of methane to methanol? This perspective focuses on molecular metal oxide complexes and suggests strategies to bypass the current bottlenecks with higher weight on the computational chemistry side. We first discuss the electronic structure of metal oxides, followed by assessing the role of the ligands in the reactivity of the catalysts. For better selectivity, we propose that metal oxide anionic complexes should be explored further, while hydrophylic cavities in the vicinity of the metal oxide can perturb the transition-state structure for methanol increasing appreciably the activation barrier for methanol. We also emphasize that computational studies should target the activation reaction of methanol (and not only methane), the study of complete catalytic cycles (including the recombination and oxidation steps), and the use of molecular oxygen as an oxidant. The titled chemical conversion is an excellent challenge for theory and we believe that computational studies should lead the field in the future. It is finally shown that bottom-up approaches offer a systematic way for exploration of the chemical space and should still be applied in parallel with the recently popular machine learning techniques. To answer the question of the title, we believe that metal oxides should still be considered provided that we change our focus and perform more systematic investigations on the activation of methanol.

Probing gas phase catalysis by atomic metal cations with flow tube mass spectrometry

The evolution and applications of flow tube mass spectrometry in the study of catalysis promoted by atomic metal ions are tracked from the pioneering days in Boulder, Colorado, to the construction and application of the ICP/SIFT/QqQ and ESI/qQ/SIFT/QqQ instruments at York University and the VISTA-SIFT instrument at the Air Force Research Laboratory. The physical separation of various sources of atomic metal ions from the flow tube in the latter instruments facilitates the spatial resolution of redox reactions and allows the separate measurement of the kinetics of both legs of a two-step catalytic cycle, while also allowing a view of the catalytic cycle in progress downstream in the reaction region of the flow tube. We focus on measurements on O-atom transfer and bond activation catalysis as first identified in Boulder and emphasize fundamental aspects such as the thermodynamic window of opportunity for catalysis, catalytic efficiency, and computed energy landscapes for atomic metal cation catalysis. Gas-phase applications include: the catalytic oxidation of CO to CO2 , of H2 to H2 O, and of C2 H4 to CH3 CHO all with N2 O as the source of oxygen; the catalytic oxidation of CH4 to CH3 OH with O3 ; the catalytic oxidation of C6 H6 with O2 . We also address the environmentally important catalytic reduction of NO2 and NO to N2 with CO and H2 by catalytic coupling of two-step catalytic cycles in a multistep cycle. Overall, the power of atomic metal cations in catalysis, and the use of flow tube mass spectrometry in revealing this power, is clearly demonstrated.

Preparation and Characterization of a Formally NiIV-Oxo Complex with a Triplet Ground State and Application in Oxidation Reactions

High-valent first-row transition-metal-oxo complexes are important intermediates in biologically and chemically relevant oxidative transformations of organic molecules and in the water splitting reaction in (artificial) photosynthesis. While high-valent Fe- and Mn-oxo complexes have been characterized in detail, much less is known about their analogues with late transition metals. In this study, we present the synthesis and detailed characterization of a unique mononuclear terminal Ni-O complex. This compound, [Ni(TAML)(O)(OH)]^3-, is characterized by an intense charge-transfer (CT) band around 730 nm and has an S_t = 1 ground state, as determined by magnetic circular dichroism spectroscopy. From extended X-ray absorption fine structure (EXAFS), the Ni-O bond distance is 1.84 Å. Ni K edge XAS data indicate that the complex contains a Ni(III) center, which results from an unusually large degree of Ni-O π-bond inversion, with one hole located on the oxo ligand. The complex is therefore best described as a low-spin Ni(III) complex (S = 1/2) with a bound oxyl (O^•-) ligand (S = 1/2), where the spins of Ni and oxyl are ferromagnetically coupled, giving rise to the observed S_t = 1 ground state. This bonding description is roughly equivalent to the presence of a Ni-O single (σ) bond. Reactivity studies show that [Ni(TAML)(O)(OH)]^3- is a strong oxidant capable of oxidizing thioanisole and styrene derivatives with large negative ρ values in the Hammett plot, indicating its electrophilic nature. The intermediate also shows high reactivity in C-H bond activation of hydrocarbons with a kinetic isotope effect of 7.0(3) in xanthene oxidation.

Gas-Phase Reactivity of Ozone with Lanthanide Ions (Sm+, Nd+) and Their Higher Oxides

The kinetics of SmO_n⁺ (n = 0-2) and NdO_n⁺ (n = 0-2) with O₃ are measured using a selected-ion flow tube. Reaction of Nd⁺ to yield NdO⁺ + O₂ occurs rapidly, with a rate constant near the capture-controlled limit of ∼8 × 10^-10 cm³ s^-1. NdO⁺ reacts at ∼40% of the capture limit to yield NdO₂⁺ with little temperature dependence from 200 to 400 K. NdO₂⁺ likely reacts very slowly (k ∼ 10^-13 cm³ s^-1) to yield NdO⁺ + 2O₂, does not react to yield NdO₃⁺, and associates slowly (k ∼ 10^-12 cm³ s^-1) to yield NdO₂⁺(O₃)_1-3. Reaction of Sm⁺ also yields SmO⁺ at near the capture limit at all temperatures, but a significant fraction (∼50%) of the SmO⁺ is produced in excited states that are long-lived compared to the millisecond time scale of the experiment. These states are evidently resistant to both radiative and collisional relaxation. The excited-state production is likely due to a spin-conservation constraint on the reaction, despite the large spin-orbit coupling typical for lanthanide-containing species. Ground-state SmO⁺ reacts inefficiently (k = 2 × 10^-11 (T/300)^-2.5 cm³ s^-1) to yield SmO₂⁺ + O₂, while the excited-state SmO^+* reacts at the capture limit, with branching to yield Sm⁺ + 2O₂ (ΔH_r,0K = 148.7 ± 0.4 kJ mol^-1 for ground-state SmO⁺) approximately 60% of the time, the remainder forming SmO₂⁺, which further reacts with O₃ to yield SmO⁺ at about 1% of the collisional value.

Ion spectroscopy in methane activation

This review is devoted to ion spectroscopy studies of complexes relevant for the understanding of methane activation with metal ions and clusters. Methane activation starts with the formation of a complex with a metal ion. The degree of the interaction between an intact methane molecule and the ion can be monitored by the perturbations of C-H stretch vibrations in the methane molecule. Binding mediated by the electrostatic interaction results in a η³ type coordination of methane. In contrast, binding governed by orbital interactions results in a η² type coordination of methane. We further review the spectroscopic characterization of activation products of metal-methane reactions, such as the metal-carbene and carbyne products resulting from the interaction of selected 5d metals with methane. The focus of recent research in the field has shifted towards the investigation of interactions between methane and metal clusters. We show examples highlighting that metal clusters can be more reactive in methane activation reactions.

Bonding, Thermodynamics, and Dissociation Dynamics of NiO+ and NiS+ Determined by Photofragment Imaging and Theory

We use photofragment ion imaging and ab initio calculations to determine the bond strength and photodissociation dynamics of the nickel oxide (NiO⁺) and nickel sulfide (NiS⁺) cations. NiO⁺ photodissociates broadly from 20350 to 32000 cm^-1, forming ground state products Ni⁺(²D) + O(³P) below ∼29000 cm^-1. Above this energy, Ni⁺(⁴F) + O(³P) products become accessible and dominate over the ground state channel. In certain images, product spin-orbit levels are resolved, and spin-orbit propensities are determined. Image anisotropy and the results of MRCI calculations suggest NiO⁺ photodissociates via a 3 ⁴Σ^- ← X ⁴Σ^- transition above the Ni⁺(⁴F) threshold and via 3 ⁴Σ^-, 2 ⁴Σ^-, and/or 2 ⁴Π and 3 ⁴Π excited states below the ⁴F threshold. The photodissociation spectrum of NiS⁺ from 19900 to 23200 cm^-1 is highly structured, with ∼12 distinct vibronic peaks, each containing underlying substructure. Above 21600 cm^-1, the Ni⁺(²D_5/2) + S(³P) and Ni⁺(²D_3/2) + S(³P) product spin-orbit channels compete, with a branching ratio of ∼2:1. At lower energy, Ni⁺(²D_5/2) is formed exclusively, and S(³P₂) and S(³P₁) spin-orbit channels are resolved. MRCI calculations predict the ground state of NiS⁺ to be one of two nearly degenerate states, the 1 ⁴Σ^- and 1 ⁴Δ. Based on images and spectra, the ground state of NiS⁺ is assigned as ⁴Δ_7/2, with the 1 ⁴Σ_3/2^- and 1 ⁴Σ_1/2^- states 81 ± 30 and 166 ± 50 cm^-1 higher in energy, respectively. The majority of the photodissociation spectrum is assigned to transitions from the 1 ⁴Δ state to two overlapping, predissociative excited ⁴Δ states. Our D₀ measurements for NiO⁺ (D₀ = 244.6 ± 2.4 kJ/mol) and NiS⁺ (D₀ = 240.3 ± 1.4 kJ/mol) are more precise and closer to each other than previously reported values. Finally, using a recent measurement of D₀(NiS), we derive a more precise value for IE (NiS): 8.80 ± 0.02 eV (849 ± 1.7 kJ/mol).

Rhodium chemistry: A gas phase cluster study

Due to the extraordinary catalytic activity in redox reactions, the noble metal, rhodium, has substantial industrial and laboratory applications in the production of value-added chemicals, synthesis of biomedicine, removal of automotive exhaust gas, and so on. The main drawback of rhodium catalysts is its high-cost, so it is of great importance to maximize the atomic efficiency of the precious metal by recognizing the structure-activity relationship of catalytically active sites and clarifying the root cause of the exceptional performance. This Perspective concerns the significant progress on the fundamental understanding of rhodium chemistry at a strictly molecular level by the joint experimental and computational study of the reactivity of isolated Rh-based gas phase clusters that can serve as ideal models for the active sites of condensed-phase catalysts. The substrates cover the important organic and inorganic molecules including CH₄, CO, NO, N₂, and H₂. The electronic origin for the reactivity evolution of bare Rh_x ^q clusters as a function of size is revealed. The doping effect and support effect as well as the synergistic effect among heteroatoms on the reactivity and product selectivity of Rh-containing species are discussed. The ingenious employment of diverse experimental techniques to assist the Rh₁- and Rh₂-doped clusters in catalyzing the challenging endothermic reactions is also emphasized. It turns out that the chemical behavior of Rh identified from the gas phase cluster study parallels the performance of condensed-phase rhodium catalysts. The mechanistic aspects derived from Rh-based cluster systems may provide new clues for the design of better performing rhodium catalysts including the single Rh atom catalysts.

Methane to Methanol Conversion Facilitated by Anionic Transition Metal Centers: The Case of Fe, Ni, Pd, and Pt

Density functional theory and high-level ab initio electronic structure calculations are performed to study the mechanism of the partial oxidation of methane to methanol facilitated by the titled anionic transition metal atoms. The energy landscape for the overall reaction M^- + N₂O + CH₄ → M^- + N₂ + CH₃OH (M = Fe, Ni, Pd, Pt) is constructed for different reaction pathways for all four metals. The comparison with earlier experimental and theoretical results for cationic centers demonstrates the better performance of the metal anions. The main advantage is that anionic centers interact weakly with the produced methanol. This fact facilitates the fast removal of methanol from the catalytic center and prevents the overoxidation of methane. Moreover, a moderate or high energy barrier for the M^- + CH₄ → HMCH₃^- reaction step is observed, which protects the metal center from deactivation. Future work should focus on the identification of proper ligands, which stabilize the negative charge on the metal (electronic factors) and prevent the formation of the global CH₃MOH^- minimum (steric factors). Finally, a composite electronic structure method (combining size extensive coupled clusters approaches and accurate multireference configuration interaction) is proposed for computationally demanding systems and is applied to Fe^-.

Mechanistic understanding of methane-to-methanol conversion on graphene-stabilized single-atom iron centers

DFT calculations and kinetic modeling elucidate solvent effects and complex mechanisms for the room-temperature methane-to-methanol conversion on an FeN4/graphene catalyst.

Identifying reactive intermediates by mass spectrometry

Development of new reactions requires finding and understanding of novel reaction pathways. In challenging reactions such as C-H activations, these pathways often involve highly reactive intermediates which are the key to our understanding, but difficult to study. Mass spectrometry has a unique sensitivity for detecting low abundant charged species; therefore it is increasingly used for detection of such intermediates in metal catalysed- and organometallic reactions. This perspective shows recent developments in the field of mass spectrometric research of reaction mechanisms with a special focus on going beyond mass-detection. Chapters discuss the advantages of collision-induced dissociation, ion mobility and ion spectroscopy for characterization of structures of the detected intermediates. In addition, we discuss the relationship between the condensed phase chemistry and mass spectrometric detection of species from solution.

Photoassisted Selective Steam and Dry Reforming of Methane to Syngas Catalyzed by Rhodium-Vanadium Bimetallic Oxide Cluster Anions at Room Temperature

Photoassisted steam reforming and dry (CO₂ ) reforming of methane (SRM and DRM) at room temperature with high syngas selectivity have been achieved in the gas-phase catalysis for the first time. The catalysts used are bimetallic rhodium-vanadium oxide cluster anions of Rh₂ VO_1-3 ^- . Both the oxidation of methane and reduction of H₂ O/CO₂ can take place efficiently in the dark while the pivotal step to govern syngas selectivity is photo-excitation of the reaction intermediates Rh₂ VO_2,3 CH₂ ^- to specific electronically excited states that can selectively produce CO and H₂ . Electronic excitation over Rh₂ VO_2,3 CH₂ ^- to control the syngas selectivity is further confirmed from the comparison with the thermal excitation of Rh₂ VO_2,3 CH₂ ^- , which leads to diversity of products. The atomic-level mechanism obtained from the well-controlled cluster reactions provides insight into the process of selective syngas production from the photocatalytic SRM and DRM reactions over supported metal oxide catalysts.

Phenyl-Group Exchange in Triphenylphosphine Mediated by Cationic Gold-Platinum Complexes-A Gas-Phase Mimetic Approach

The PPh₃ ligands in the heterodinuclear AuPt complex [(Ph₃P)AuPt(PPh₃)₃][BAr₄^F] (BAr₄^F = tetrakis[3,5-bis(trifluoromethyl)phenyl]borate) exhibit a high fluxionality on the AuPt core. Fast intramolecular and slow intermolecular processes for the reversible exchange of the PPh₃ ligands have been identified. When [(Ph₃P)AuPt(PPh₃)₃][BAr₄^F] is heated in solution, the formation of benzene is observed, and a trinuclear, cationic AuPt₂ complex is generated. This process is preceded by reversible phenyl-group exchange between the PPh₃ ligands present in the reaction mixture as elucidated by deuterium-labeling studies. Both the elimination of benzene and the preceding reversible phenyl-group exchange have originally been observed in mass-spectrometry-based CID experiments (CID = Collision-Induced Dissociation). While CID of mass-selected [Au,Pt,(PPh₃)₄]⁺ results exclusively in the loss of PPh₃, the resulting cation [Au,Pt,(PPh₃)₃]⁺ selectively eliminates C₆H₆. Thus, the dissociation of a PPh₃ ligand from [Au,Pt,(PPh₃)₃]⁺ is energetically not able to compete with processes which result in C-H- and C-P-bond cleavage. In both media, the heterobimetallic nature of the employed complexes is the key for the observed reactivity. Only the intimate interplay of the gas-phase investigations, studies in solution, and thorough DFT computations allowed for the elucidation of the mechanistic details of the reactivity of [(Ph₃P)AuPt(PPh₃)₃][BAr₄^F].

Barrierless methane-to-methanol conversion: the unique mechanism of AlO. Phys Chem Chem Phys 2020;22:14544-14550. [PMID: 32589175 DOI: 10.1039/d0cp02316g]

The kinetics of AlO+ + CH4 are studied from 300-500 K using a selected-ion flow tube. At all temperatures the reaction proceeds near the Langevin-Gioumousis-Stevenson collision rate with two product channels: hydrogen atom abstraction (AlOH+ + CH3, 86 ± 5%) and methanol formation (Al+ + CH3OH, 14 ± 5%). Density functional calculations show the key Al-CH3OH+ intermediate is formed barrierlessly via a mechanism unique to aluminum, avoiding the rate-limiting step common to other MO+. The reaction of Al2O3+ + CH4 follows a similar mechanism to that for AlO+ through to the key intermediate; however, the conversion to methanol occurs only for AlO+ due to favorable energetics attributed to a weaker Al+-CH3OH bond. Importantly, that bond strength may be tuned independent of competing product channels by altering the acidity of the Al with electron-withdrawing or donating groups, indicating a key design criteria to develop a real world Al-atom catalyst.

Iron and manganese oxo complexes, oxo wall and beyond

High-valent metal-oxo species with multiply-bonded M-O groups have been proposed as key intermediates in many biological and abiological catalytic oxidation reactions. These intermediates are implicated as active oxidants in alkane hydroxylation, olefin epoxidation and other oxidation reactions. For example, [Fe^ivO(porphyrinato^•-)]⁺ cofactors bearing π-radical porphyrinato^•- ligands oxidize organic substrates in cytochrome P450 enzymes, which are common to many life forms. Likewise, high-valent Mn-oxo species are active for H₂O oxidation in photosystem II. The chemistry of these native reactive species has inspired chemists to prepare highly oxidized transition-metal complexes as functional mimics. Although many synthetic Fe-O and Mn-O complexes now exist, the analogous oxo complexes of the late transition metals (groups 9-11) are rare. Indeed, late-transition-metal-oxo complexes of tetragonal (fourfold) symmetry should be electronically unstable, a rule commonly referred to as the 'oxo wall'. A few late metal-oxos have been prepared by targeting other symmetries or unusual spin states. These complexes have been studied using spectroscopic and theoretical methods. This Review describes mononuclear non-haem Fe-O and Mn-O species, the nature of the oxo wall and recent advances in the preparation of oxo complexes of Co, Ni and Cu beyond the oxo wall.

Propene oxidation catalysis and electronic structure of M55 particles (M = Pd or Rh): differences and similarities between Pd55 and Rh55

Propene oxidation is one of the important reactions that occurs in the presence of a three-way catalyst but its reaction mechanism is unclear. The reaction mechanisms and differences in catalysis between Pd and Rh particles were investigated by DFT calculations employing Pd₅₅ and Rh₅₅ as the model catalysts. The O-attack mechanism, in which the O atom adsorbed on the Pd₅₅ and Rh₅₅ surfaces attacks the C[double bond, length as m-dash]C double bond of propene, needs to overcome a large activation barrier (E_a). On the other hand, C-H bond cleavage of the methyl group of propene easily occurs with moderate E_a; the mechanism initiated by this C-H activation is named H-transfer mechanism. In this mechanism, the next step is allyl alcohol formation, followed by the second C-H bond activation of the CH₂OH species of allyl alcohol, and the final step is proton transfer from OH-substituted π-allyl species to the OH group on the metal surface to yield acrolein and water molecules with the regeneration of M₅₅. The rate-determining step is the second C-H bond activation. Its E_a is 17.4 kcal mol^-1 for the reaction on Pd₅₅ and 34.4 kcal mol^-1 for the reaction on Rh₅₅. These results indicate that Pd particles are more active than Rh particles in propene oxidation, which agrees with the experimental findings. The larger E_a for Rh₅₅ than that for Pd₅₅ arises from the stronger Rh-OH bond than the Pd-OH bond. The higher energy d-valence band-top of Rh₅₅ than that of Pd₅₅ is the origin of the stronger Rh-OH bond than the Pd-OH bond. Thus, the d-valence band-top energy is an important property for understanding and designing catalysts for alkene oxidation.

A study of the reactions of Ni+ and NiO+ ions relevant to planetary upper atmospheres

The reactions between Ni+(2D) and O3, O2, N2, CO2 and H2O were studied at 294 K using the pulsed laser ablation at 532 nm of a nickel metal target in a fast flow tube, with mass spectrometric detection of Ni+ and NiO+. The rate coefficient for the reaction of Ni+ with O3 is k(294 K) = (9.7 ± 2.1) × 10-10 cm3 molecule-1 s-1; the reaction proceeds at the ion-permanent dipole enhanced Langevin capture rate with a predicted T-0.16 dependence. Electronic structure theory calculations were combined with Rice-Ramsperger-Kassel-Markus theory to extrapolate the measured recombination rate coefficients to the temperature and pressure conditions of planetary upper atmospheres. The following low-pressure limiting rate coefficients were obtained for T = 120-400 K and He bath gas (in cm6 molecule-2 s-1, uncertainty ±σ at 180 K): log10(k, Ni+ + N2) = -27.5009 + 1.0667log10(T) - 0.74741(log10(T))2, σ = 29%; log10(k, Ni+ + O2) = -27.8098 + 1.3065log10(T) - 0.81136(log10(T))2, σ = 32%; log10(k, Ni+ + CO2) = -29.805 + 4.2282log10(T) - 1.4303(log10(T))2, σ = 28%; log10(k, Ni+ + H2O) = -24.318 + 0.20448log10(T) - 0.66676(log10(T))2, σ = 28%). Other rate coefficients measured (at 294 K, in cm3 molecule-1 s-1) were: k(NiO+ + O) = (1.7 ± 1.2) × 10-10; k(NiO+ + CO) = (7.4 ± 1.3) × 10-11; k(NiO+ + O3) = (2.7 ± 1.0) × 10-10 with (29 ± 21)% forming Ni+ as opposed to NiO2+; k(NiO2+ + O3) = (2.9 ± 1.4) × 10-10, with (16 ± 9)% forming NiO+ as opposed to ONiO2+; and k(Ni+·N2 + O) = (7 ± 4) × 10-12. The chemistry of Ni+ and NiO+ in the upper atmospheres of Earth and Mars is then discussed.

Experimental and computational investigations of C–H activation of cyclohexane by ozone in liquid CO2

Cyclohexane ozonation in liquid CO₂ produces cyclohexanone, a precursor to adipic acid, cleanly at high yields compared to conventional process.

Gas-Phase Synthesis and Reactivity of Ligated Group 10 Ions in the Formal +1 Oxidation State

Electrospray ionization of the group 10 complexes [(phen)M(O₂CCH₃)₂] (phen=1,10-phenanthroline, M = Ni, Pd, Pt) generates the cations [(phen)M(O₂CCH₃)]⁺, whose gas-phase chemistry was studied using multistage mass spectrometry experiments in an ion trap mass spectrometer with the combination of collision-induced dissociation (CID) and ion-molecule reactions (IMR). Decarboxylation of [(phen)M(O₂CCH₃)]⁺ under CID conditions generates the organometallic cations [(phen)M(CH₃)]⁺, which undergo bond homolysis upon a further stage of CID to generate the cations [(phen)M]^+· in which the metal center is formally in the +1 oxidation state. In the case of [(phen)Pt(CH₃)]⁺, the major product ion [(phen)H]⁺ was formed via loss of the metal carbene Pt=CH₂. DFT calculated energetics for the competition between bond homolysis and M=CH₂ loss are consistent with their experimentally observed branching ratios of 2% and 98% respectively. The IMR of [(phen)M]^+· with O₂, N₂, H₂O, acetone, and allyl iodide were examined. Adduct formation occurs for O₂, N₂, H₂O, and acetone. Upon CID, all adducts fragment to regenerate [(phen)M]^+·, except for [(phen)Pt(OC(CH₃)₂)]^+·, which loses a methyl radical to form [(phen)Pt(OCCH₃)]⁺ which upon a further stage of CID regenerates [(phen)Pt(CH₃)]⁺ via CO loss. This closes a formal catalytic cycle for the decomposition of acetone into CO and two methyl radicals with [(phen)Pt]^+· as catalyst. In the IMR of [(phen)M]^+· with allyl iodide, formation of [(phen)M(CH₂CHCH₂)]⁺ was observed for all three metals, whereas for M = Pt also [(phen)Pt(I)]⁺ and [(phen)Pt(I)₂(CH₂CHCH₂)]⁺ were observed. Finally, DFT calculated reaction energetics for all IMR reaction channels are consistent with the experimental observations.

On the Role of Hydrogen Atom Transfer (HAT) in Thermal Activation of Methane by MnO+: Entropy vs. Energy

The temperature dependent kinetics and product branching fractions of first-row transition metal oxide cation MnO+ with CH4 and CD4 at temperatures between 200 and 600 K are measured using a selected-ion flow tube apparatus. Likely reaction mechanisms are determined by comparison of temperature dependent kinetics to statistical modeling along calculated reaction coordinates. The data is well-modeled with the reaction proceeding over a rate limiting four-centered transition state leading to an insertion intermediate, similar to reactions of NiO+ and FeO+, and showing characteristics of proton-coupled electron transfer (PCET). However, a more direct pathway traversing a transition state of hydrogen atom transfer (HAT) character to a hydroxyl intermediate is found to possibly be competitive, especially with increasing temperature. While uncertainties in calculated energetics limit quantitative assessment of the role of HAT at thermal energies, it is clear that this mechanism becomes increasingly prevalent in higher energy regimes.

Methane Activation by Gas Phase Atomic Clusters

The increasing supply of natural gas has created a strong demand for developing efficient catalytic processes to upgrade methane, the most stable alkane molecule, into value-added chemicals. Currently, methane conversion in laboratory and industry is mostly performed under high-temperature conditions. A lot of effort has been devoted to exploring chemical entities that are able to activate the C-H bond of methane at lower temperatures, preferably room temperature. Gas phase atomic clusters with limited numbers of atoms are ideal models of active sites on heterogeneous catalysts. The cluster systems are being actively studied to activate methane under room-temperature conditions. State-of-the-art mass spectrometry, photoelectron imaging spectroscopy, and quantum chemistry calculations have been combined in our laboratory to reveal the molecular-level mechanisms of methane activation by atomic clusters. In this Account, we summarize our recent progress on thermal methane activation by metal oxide clusters doped with noble-metal atoms (Au, Pt, and Rh) as well as by oxygen-free species including carbides and borides of base metals (V, Ta, Mo, and Fe). In contrast to the generations of CH₃^• free radicals in many of the previously reported cluster reactions with methane, the generations of stable products such as formaldehyde, acetylene, and syngas as well as closed-shell species AuCH₃ and B₃CH₃ have been identified for the cluster reaction systems herein. Besides the well recognized mechanisms of methane activation by the O^-• radicals through hydrogen atom abstraction and by metal atoms through oxidative addition, the new mechanisms of synergistic methane activation by Lewis acid-base pairs (such as Au^δ+-O^δ- and B^δ+-B^δ-) and by dinuclear metal centers (such as Ta-Ta) have been recently revealed. In the reactions between methane and oxide clusters doped with noble-metal atoms, the oxide cluster "supports" can accept the H atoms and the CH _x species delivered through the noble-metal atoms and then transform methane into stable oxygenated compounds. The product selectivity (such as formaldehyde versus syngas) can be controlled by different noble-metal atoms (such as Pt versus Rh). The electronic structures of base metal centers can be engineered through carburization so that the low-spin states can be accessible to reduce the C-H bond of methane. Such active base metal centers in low-spin states resemble related noble-metal atoms in methane activation. The boron clusters (such as B₃ in VB₃⁺) can be polarized by the metal cations to form the Lewis acid-base pair B^δ+-B^δ- to cleave the C-H bond of methane very easily. These molecular-level mechanisms may well be operative in related heterogeneous catalysis and can be a fundamental basis to design efficient catalysts for activation and conversion of methane under mild conditions.

Temperature and Isotope Dependent Kinetics of Nickel-Catalyzed Oxidation of Methane by Ozone

The temperature dependent kinetics of Ni⁺ + O₃ and of NiO⁺ + CH₄/CD₄ are measured from 300 to 600 K using a selected-ion flow tube apparatus. Together, these reactions comprise a catalytic cycle converting CH₄ to CH₃OH. The reaction of Ni⁺ + O₃ proceeds at the collisional limit, faster than previously reported at 300 K. The NiO⁺ product reacts further with O₃, also at the collisional limit, yielding both higher oxides (up to NiO₅⁺ is observed) as well as undergoing an apparent reduction back to Ni⁺. This apparent reduction channel is due to the oxidation channel yielding NiO₂⁺* with sufficient energy to dissociate. ⁴NiO⁺ + CH₄ (CD₄) (whereas ⁴NiO⁺ refers to the quartet state of NiO⁺) proceeds with a rate constant of (2.6 ± 0.4) × 10^-10 cm³ s^-1 [(1.8 ± 0.5) × 10^-10 cm³ s^-1] at 300 K and a temperature dependence of ∼ T^-0.7±0.3 (∼ T^-1.1±0.4), producing only the ²Ni⁺ + ¹CH₃OH channel up to 600 K. Statistical modeling of the reaction based on calculated stationary points along the reaction coordinate reproduces the experimental rate constant as a function of temperature but underpredicts the kinetic isotope shift. The modeling was found to better represent the data when the crossing from quartet to doublet surface was incomplete, suggesting a possible kinetic effect in crossing from quartet to doublet surfaces. Additionally, the modeling predicts a competing ³NiOH⁺ + ²CH₃ channel to become increasingly important at higher temperatures.

How to tame a palladium terminal oxo

The isolation of terminal oxo complexes of the late transition metals promises new avenues in oxidation catalysis like the selective and catalytic hydroxylation of unreactive CH bonds, the activation of water, or the upgrading of olefins. While terminal oxo ligands are ubiquitous for early transition metals, well-characterized examples with group 10 metals remain hitherto elusive. In search for palladium terminal oxo complexes, the relative stability/reactivity of such compounds are evaluated computationally (CASSCF/NEVPT2; DFT). The calculations investigate only well-known ligand systems with established synthetic procedures and relevance for coordination chemistry and homogeneous catalysis. They delineate and quantify, which electronic properties of ancillary ligands are crucial for taming otherwise highly reactive terminal oxo intermediates. Notably, carbene ligands with both strong σ-donor and strong π-acceptor properties are best suited for the stabilization of palladium(ii) terminal oxo complexes, whereas ligands with a weaker ligand field lead to highly reactive complexes. Strongly donating ligands are an excellent choice for high-valent palladium(iv) terminal oxo compounds. Low coordinate palladium(ii) as well as high-valent palladium(iv) complexes are best suited for the activation of strong bonds.

Ab initio calculations on the ground and excited electronic states of neutral and charged palladium monoxide, PdO0,+,−

Multi-reference configuration interaction and coupled cluster calculations were carried out for the ground and several low-lying excited electronic states for PdO, PdO⁺, and PdO⁻. The photoelectron spectrum peaks of PdO were assigned.

On the Electronic Origin of Remarkable Ligand Effects on the Reactivities of [NiL]+ Complexes (L=C6 H5 , C5 H4 N, CN) towards Methane

The gas-phase reactions of [NiL]⁺ (L=C₆ H₅ , C₅ H₄ N, CN) with methane have been explored by using electrospray-ionization mass spectrometry (ESI-MS) complemented by quantum chemical calculations. Though the phenyl Ni complex [Ni(C₆ H₅ )]⁺ exclusively abstracts one hydrogen atom from methane at ambient conditions, the cyano Ni complex [Ni(CN)]⁺ brings about both H-atom abstraction and ligand exchange to generate [Ni(CH₃ )]⁺ . In contrast, the complex 2-pyridinyl Ni [Ni(C₅ H₄ N)]⁺ is inert towards this substrate. The presence of the empty 4s(Ni) orbital dominates the proton-coupled electron transfer (PCET) processes for the investigated systems.

Determining Rate Constants and Mechanisms for Sequential Reactions of Fe+ with Ozone at 500 K

We present rate constants and product branching ratios for the reactions of FeO_x⁺ (x = 0-4) with ozone at 500 K. Fe⁺ is observed to react with ozone at the collision rate to produce FeO⁺ + O₂. The FeO⁺ in turn reacts with ozone at the collision rate to yield both Fe⁺ and FeO₂⁺ product channels. Ions up to FeO₄⁺ display similar reactivity patterns. Three-body clustering reactions with O₂ prevent us from measuring accurate rate constants at 300 K although the data do suggest that the efficiency is also high. Therefore, it is probable that little to no temperature dependence exists over this range. Implications of our measurements to the regulation of atmospheric iron and ozone are discussed. Density functional calculations on the reaction of Fe⁺ with ozone show no substantial kinetic barriers to make the FeO⁺ + O₂ product channel, which is consistent with the reaction's efficiency. While a pathway to make FeO₂⁺ + O is also found to be barrierless, our experiments indicate no primary FeO₂⁺ formation for this reaction.

Ménage-à-trois: single-atom catalysis, mass spectrometry, and computational chemistry

Genuine, single-atom catalysis can be realized in the gas phase and probed by mass spectrometry combined with computational chemistry.

Submerged Barriers in the Ni(+) Assisted Decomposition of Propionaldehyde

The reaction dynamics of the Ni(+) mediated decarbonylation of propionaldehyde was assessed using the single photon initiated decomposition rearrangement reaction (SPIDRR) technique. The exothermic production of Ni(+)CO was temporally monitored and the associated rate constants, k(E), were extracted as a function of activating photon energy. In addition, the reaction potential energy surface was calculated at the UCCSD(T)/def2-TZVP//PBEPBE/cc-pVDZ level of theory to provide an atomistic description of the reaction profile. The decarbonylation of propionaldehyde can be understood as proceeding through parallel competitive reaction pathways that are initiated by Ni(+) insertion into either the C-C or C-H bond of the propionaldehyde carbonyl carbon. Both paths lead to the elimination of neutral ethane and are governed by submerged barriers. The lower energy sequence is a consecutive C-C/C-H addition process with a submerged barrier of 14 350 ± 600 cm(-1). The higher energy sequence is a consecutive C-H/C-C addition process with a submerged barrier of 15 400 ± 600 cm(-1). Both barriers were determined using RRKM calculations fit to the experimentally determined k(E) values. The measured energy difference between the two barriers agrees with the DFT computed difference in rate limiting transition-state energies, 18 413 and 19 495 cm(-1).

The dehydrogenation of alcohols and hydrocarbons by atomic metal anions

The reactivity of anionic metal-carbonyl systems toward hydrocarbons, alcohols and a variety of other classes of molecules is well established in the literature. In this study we explored the reactions of atomic metal anions M(-), notably K(-), Cs(-), Co(-), Fe(-), Cu(-) and Ag(-), with alcohols, alkanes, alkenes and alkynes. All of the metal anions deprotonated the alcohols and alkynes. Also observed were the subsequent reactions of the resulting organic anions. Fe(-) and Cu(-) consistently displayed mono- and bis-dehydrogenation of primary and secondary alcohols, and alkanes, alkenes and alkynes to form MH(-) and MH(2)(-). Mechanisms for the dehydrogenation reactions are proposed and substantiated with isotopically-labelled reagents and thermochemical arguments.