Complexes of Click-Derived Bistriazolylpyridines: Remarkable Electronic Influence of Remote Substituents on Thermodynamic Stability as well as Electronic and Magnetic Properties

Structures and Spin States of Iron(II) Complexes of Isomeric 2,6-Di(1,2,3-triazolyl)pyridine Ligands

Iron(II) complex salts of 2,6-di(1,2,3-triazol-1-yl)pyridine (L¹) are unexpectedly unstable in undried solvent. This is explained by the isolation of [Fe(L¹)₄(H₂O)₂][ClO₄]₂ and [Fe(NCS)₂(L¹)₂(H₂O)₂]·L¹, containing L¹ bound as a monodentate ligand rather than in the expected tridentate fashion. These complexes associate into 4⁴ grid structures through O-H···N hydrogen bonding; a solvate of a related 4⁴ coordination framework, catena-[Cu(μ-L¹)₂(H₂O)₂][BF₄]₂, is also presented. The isomeric ligands 2,6-di(1,2,3-triazol-2-yl)pyridine (L²) and 2,6-di(1H-1,2,3-triazol-4-yl)pyridine (L³) bind to iron(II) in a more typical tridentate fashion. Solvates of [Fe(L³)₂][ClO₄]₂ are low-spin and diamagnetic in the solid state and in solution, while [Fe(L²)₂][ClO₄]₂ and [Co(L³)₂][BF₄]₂ are fully high-spin. Treatment of L³ with methyl iodide affords 2,6-di(2-methyl-1,2,3-triazol-4-yl)pyridine (L⁴) and 2-(1-methyl-1,2,3-triazol-4-yl)-6-(2-methyl-1,2,3-triazol-4-yl)pyridine (L⁵). While salts of [Fe(L⁵)₂]²⁺ are low-spin in the solid state, [Fe(L⁴)₂][ClO₄]₂·H₂O is high-spin, and [Fe(L⁴)₂][ClO₄]₂·3MeNO₂ exhibits a hysteretic spin transition to 50% completeness at T_1/2 = 128 K (ΔT_1/2 = 6 K). This transition proceeds via a symmetry-breaking phase transition to an unusual low-temperature phase containing three unique cation sites with high-spin, low-spin, and 1:1 mixed-spin populations. The unusual distribution of the spin states in the low-temperature phase reflects "spin-state frustration" of the mixed-spin cation site by an equal number of high-spin and low-spin nearest neighbors. Gas-phase density functional theory calculations reproduce the spin-state preferences of these and some related complexes. These highlight the interplay between the σ-basicity and π-acidity of the heterocyclic donors in this ligand type, which have opposing influences on the molecular ligand field. The Brønsted basicities of L¹-L³ are very sensitive to the linkage isomerism of their triazolyl donors, which explains why their iron complex spin states show more variation than the better-known iron(II)/2,6-dipyrazolylpyridine system.

Mechanically Interlocked Chiral Self-Templated [2]Catenanes from 2,6-Bis(1,2,3-triazol-4-yl)pyridine (btp) Ligands

We report the efficient self-templated formation of optically active 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) derived homocircuit [2]catenane enantiomers. This represents the first example of the enantiopure formation of chiral btp homocircuit [2]catenanes from starting materials consisting of a classical chiral element; X-ray diffraction crystallography enabled the structural characterization of the [2]catenane. The self-assembly reaction was monitored closely in solution facilitating the characterization of the pseudo-rotaxane reaction intermediate prior to mechanically interlocking the pre-organised system via ring-closing metathesis.

Distinct photodynamics of κ-N and κ-C pseudoisomeric iron(II) complexes

Two closely related FeII complexes with 2,6-bis(1-ethyl-1H-1,2,3-triazol-4yl)pyridine and 2,6-bis(1,2,3-triazol-5-ylidene)pyridine ligands are presented to gain new insights into the photophysics of bis(tridentate) iron(ii) complexes. The [Fe(N^N^N)2]2+ pseudoisomer sensitizes singlet oxygen through a MC state with nanosecond lifetime after MLCT excitation, while the bis(tridentate) [Fe(C^N^C)2]2+ pseudoisomer possesses a similar 3MLCT lifetime as the tris(bidentate) [Fe(C^C)2(N^N)]2+ complexes with four mesoionic carbenes.

Ruthenium-centred btp glycoclusters as inhibitors for Pseudomonas aeruginosa biofilm formation

Carbohydrate-decorated clusters (glycoclusters) centred on a Ru(ii) ion were synthesised and tested for their activity against Pseudomonas aeruginosa biofilm formation. These clusters were designed by conjugating a range of carbohydrate motifs (galactose, glucose, mannose and lactose, as well as galactose with a triethylene glycol spacer) to a btp (2,6-bis(1,2,3-triazol-4-yl)pyridine) scaffold. This scaffold, which possesses a C₂ symmetry, is an excellent ligand for d-metal ions, and thus the formation of the Ru(ii)-centred glycoclusters 7 and 8Gal was achieved from 5 and 6Gal; each possessing four deprotected carbohydrates. Glycocluster 8Gal, which has a flexible spacer between the btp and galactose moieties, showed significant inhibition of P. aeruginosa bacterial biofilm formation. By contrast, glycocluster 7, which lacked the flexible linker, didn't show significant antimicrobial effects and neither does the ligand 6Gal alone. These results are proposed to arise from carbohydrate–lectin interactions with LecA, which are possible for the flexible metal-centred multivalent glycocluster. Metal-centred glycoclusters present a structurally versatile class of antimicrobial agent for P. aeruginosa, of which this is, to the best of our knowledge, the first example.

Ruthenium-centred glycoclusters based on carbohydrate-functionalised bis(triazolyl)pyridine ligands show Pseudomonas aeruginosa biofilm inhibition, with activity that is dependent on ligand structure.

Structural Transformations and Spin-Crossover in [FeL2 ]2+ Salts (L=4-{tert-Butylsulfanyl}-2,6-di{pyrazol-1-yl}pyridine): The Influence of Bulky Ligand Substituents

4-(tert-Butylsulfanyl)-2,6-di(pyrazol-1-yl)pyridine (L) was obtained in low yield from a one-pot reaction of 2,4,6-trifluoropyridine with 2-methylpropane-2-thiolate and sodium pyrazolate in a 1:1:2 ratio. The materials [FeL₂ ][BF₄ ]₂ ⋅solv (1[BF₄ ]₂ ⋅solv) and [FeL₂ ][ClO₄ ]₂ ⋅solv (1[ClO₄ ]₂ ⋅solv; solv=MeNO₂ , MeCN or Me₂ CO) exhibit a variety of structures and spin-state behaviors including thermal spin-crossover (SCO). Solvent loss on heating 1[BF₄ ]₂ ⋅x MeNO₂ (x≈2.3) occurs in two steps. The intermediate phase exhibits hysteretic SCO around 250 K, involving a "reverse-SCO" step in its warming cycle at a scan rate of 5 K min^-1 . The reverse-SCO is not observed in a slower 1 K min^-1 measurement, however, confirming its kinetic nature. The final product [FeL₂ ][BF₄ ]₂ ⋅0.75 MeNO₂ was crystallographically characterized, and shows abrupt but incomplete SCO at 172 K which correlates with disorder of an L ligand. The asymmetric unit of 1[BF₄ ]₂ ⋅y Me₂ CO (y≈1.6) contains five unique complex molecules, four of which undergo gradual SCO in at least two discrete steps. Low-spin 1[ClO₄ ]₂ ⋅0.5 Me₂ CO is not isostructural with its BF₄ ^- congener, and undergoes single-crystal-to-single-crystal solvent loss with a tripling of the crystallographic unit cell volume, while retaining the P 1 ‾ space group. Three other solvate salts undergo gradual thermal SCO. Two of these are isomorphous at room temperature, but transform to different low-temperature phases when the materials are fully low-spin.

Structural properties of the chelating agent 2,6-bis(1-(3-hydroxypropyl)-1,2,3-triazol-4-yl)pyridine: a combined XRD and DFT structural study

The conformational isomerism of the chelating agent 2,6-bis(1-(3-hydroxypropyl)-1,2,3-triazol-4-yl)pyridine (PTD), exploited in fuel reprocessing in spent nuclear waste, has been studied by single crystal X-ray diffraction analysis in combination with an extensive DFT conformational investigation. In the solid-state, the elucidated crystal structure (i.e., not yet published) shows that by thermal treatment (DSC) no other phases are observed upon crystallization from the melt, indicating that the conformation observed by X-ray data is rather stable. Mapping of intermolecular and intramolecular noncovalent interactions has been used to elucidate the unusual arrangement of the asymmetric unit. Considerations relating to the stability of different conformational isomers in aqueous and non-aqueous solutions are also presented. The accurate structural description reported here might open various research topics such as the potential of PTD to act as an outer sphere ligand in the formation of second sphere coordination complexes and their interconversion by mechanochemical means.

Predictable Substituent Control of CoIII/II Redox Potential and Spin Crossover in Bis(dipyridylpyrrolide)cobalt Complexes

A family of five easily prepared tridentate monoanionic 2,5-dipyridyl-3-(R¹)-4-(R²)-pyrrolide anions (dpp^R1,R2)^-, varying in the nature of the R¹ and R² substituents [R¹, R² = CN, Ph; CO₂Et, CO₂Et; CO₂Me, 4-Py; CO₂Me, Me; Me, Me], has been used to generate the analogous family of neutral [Co^II(dpp^R1,R2)₂] complexes, two of which are structurally characterized at both 100 and 298 K. Both the oxidation and spin states of these complexes can be switched in response to appropriate external stimuli. All complexes, except [Co^II(dpp^Me,Me)₂], exhibit gradual spin crossover (SCO) in the solid state, and SCO activity is observed for three complexes in CDCl₃ solution. The cobalt(II) centers in the low spin (LS) complexes are Jahn-Teller tetragonally compressed along the pyrrolide-Co-pyrrolide axis. The complexes in their high spin (HS) states are more distorted than in the LS states, as is also usually the case for SCO active iron(II) complexes. The reversible Co^III/II redox potentials are predictably tuned by choice of substituents R¹ and R², from -0.95 (Me,Me) to -0.45 (CN,Ph) V vs Fc⁺/Fc, with a linear correlation observed between E_1/2(Co^III/II) and the Swain-Lupton parameters of the pyrrolide substituents.

Functionalized Self-Assembled Monolayers Bearing Diiminate Complexes Immobilized through Covalently Anchored Ligands

The application of synthetic organic chemistry to the surface chemistry of monolayer arrays adds a novel dimension to the power of these systems for surface modification. This paper describes the elaboration of simple functionalized monolayers into dialdimine and dialdiminate ligands tethered to the monolayer surface. These ligands are then used to coordinate metal ions in an effort to form diiminate complexes with control over their environment and orientation. Ligand anchoring is best achieved through either thiol-ene photochemistry or azide-acetylene "click" chemistry. There is an influence of ligand bulk on some surface transformations, and in some cases reactions that have been reported to be effective on simple, homogeneous monolayer surfaces are not applicable to a more complex monolayer environment. The large excess of solution reagents relative to monolayer surface functionality adds another measure of difficulty to the control of interfacial reactions. In instances where the anchoring chain includes functional groups that can directly interact with metal ions, the metalation of ligand-bearing surfaces resulted in a higher metal ion content than would have been expected from binding only to the diimine ligands.

Solvent Effects on the Spin-Transition in a Series of Fe(II) Dinuclear Triple Helicate Compounds

This work explores the effect of lattice solvent on the observed solid-state spin-transition of a previously reported dinuclear Fe(II) triple helicate series 1–3 of the general form [FeII2L3](BF4)4(CH3CN)n, where L is the Schiff base condensation product of imidazole-4-carbaldehyde with 4,4-diaminodiphenylmethane (L1), 4,4′-diaminodiphenyl sulfide (L2) and 4,4′-diaminodiphenyl ether (L3) respectively, and 1 is the complex when L = L1, 2 when L = L2 and 3 when L = L3 (Craze, A.R.; Sciortino, N.F.; Bhadbhade, M.M.; Kepert, C.J.; Marjo, C.E.; Li, F. Investigation of the Spin Crossover Properties of Three Dinuclear Fe(II) Triple Helicates by Variation of the Steric Nature of the Ligand Type. Inorganics. 2017, 5 (4), 62). Desolvation of 1 and 2 during measurement resulted not only in a decrease in T1/2 and completeness of spin-crossover (SCO) but also a change in the number of steps in the spin-profile. Compounds 1 and 2 were observed to change from a two-step 70% complete transition when fully solvated, to a single-step half complete transition upon desolvation. The average T1/2 value of the two-steps in the solvated materials was equivalent to the single T1/2 of the desolvated sample. Upon solvent loss, the magnetic profile of 3 experienced a transformation from a gradual SCO or weak antiferromagnetic interaction to a single half-complete spin-transition. Variable temperature single-crystal structures are presented and the effects of solvent molecules are also explored crystallographically and via a Hirshfeld surface analysis. The spin-transition profiles of 1–3 may provide further insight into previous discrepancies in dinuclear triple helicate SCO research reported by the laboratories of Hannon and Gütlich on analogous systems (Tuna, F.; Lees, M. R.; Clarkson, G. J.; Hannon, M. J. Readily Prepared Metallo-Supramolecular Triple Helicates Designed to Exhibit Spin-Crossover Behaviour. Chem. Eur. J. 2004, 10, 5737–5750 and Garcia, Y.; Grunert, C. M.; Reiman, S.; van Campenhoudt, O.; Gütlich, P. The Two-Step Spin Conversion in a Supramolecular Triple Helicate Dinuclear Iron(II) Complex Studied by Mössbauer Spectroscopy. Eur. J. Inorg. Chem. 2006, 3333–3339).

Revisiting ring-degenerate rearrangements of 1-substituted-4-imino-1,2,3-triazoles

The 1-substituted-4-imino-1,2,3-triazole motif is an established component of coordination compounds and bioactive molecules, but depending on the substituent identity, it can be inherently unstable due to Dimroth rearrangements. This study examined parameters governing the ring-degenerate rearrangement reactions of 1-substituted-4-imino-1,2,3-triazoles, expanding on trends first observed by L’abbé et al. The efficiency of condensation between 4-formyltriazole and amine reactants as well as the propensity of imine products towards rearrangement was each strongly influenced by the substituent identity. It was observed that unsymmetrical condensation reactions conducted at 70 °C produced up to four imine products via a dynamic equilibrium of condensation, rearrangement and hydrolysis steps. Kinetic studies utilizing 1-(4-nitrophenyl)-1H-1,2,3-triazole-4-carbaldehyde with varying amines showed rearrangement rates sensitive to both steric and electronic factors. Such measurements were facilitated by a high throughput colorimetric assay to directly monitor the generation of a 4-nitroaniline byproduct.

Comparing Isomeric Tridentate Carbazole-Based Click Ligands: Metal Complexes and Redox Chemistry

Two novel bis(triazolyl)carbazole ligands Hbtc1 (3,6-di(tert-butyl)-1,8-bis[(1-(3,5-di(tert-butyl)phenyl)-1,2,3-triazol-4-yl)]-9H-carbazole) and Hbtc2 (3,6-di(tert-butyl)-1,8-bis[(4-(3,5-di(tert-butyl)phenyl)-1,2,3-triazol-1-yl)]-9H-carbazole), differing in the regiochemistry of triazole attachment, have been synthesized by Cu-catalyzed azide-alkyne cycloaddition, the so-called "click-reactions". Metalation with Ru, Zn, and Ni precursors led to the formation of M(btc)₂ complexes (M=Ru, Zn, Ni), with two deprotonated ligands coordinating to the metal center in tridentate fashion, forming almost perfectly octahedral coordination spheres. The redox properties of M(btc)₂ complexes have been investigated by cyclic voltammetry, UV/Vis spectroscopy, spectroelectrochemistry, and chemically. The CV of the ruthenium complexes revealed three quasi-reversible one-electron oxidation processes, one assigned as the Ru^II/III couple and two originating from ligand-based oxidations. The CVs of both Zn and Ni complexes contained only two oxidation waves corresponding to the oxidation of the two ligands. The oxidation potentials of complexes derived from Hbtc1 ligands were found to be 300-400 mV lower than those of the corresponding complexes derived from Hbtc2, reflecting the significant difference in donation through the N(2) or N(3) atom of the triazole moiety.

Computational investigations of click-derived 1,2,3-triazoles as keystone ligands for complexation with transition metals: a review

In recent years, metal complexes of organo 1,2,3-triazole click-derived ligands have attracted significant attention as catalysts in many chemical transformations and also as biological and pharmaceutical active agents. Regarding the important applications of these metal-organo 1,2,3-triazole-based complexes, in this review, we focused on the recently reported investigations of the structural, electronic, and spectroscopic aspects of the complexation process in transition metal complexes of 1,2,3-triazole-based click ligands. In line with this, the coordination properties of these triazole-based click ligands with transition metals were studied via several quantum chemistry calculations. Moreover, considering the complexation process, we have presented comparative discussions between the computational results and the available experimental data.

Click Chemistry Derived Pyridazines: Electron-Deficient Building Blocks with Defined Conformation and Packing Structure

A series of 3,6-bis(4-triazolyl)pyridazines equipped with terminal phenyl substituents with varying degree of fluorination were synthesized by using the facile copper-catalyzed azide-alkyne cycloaddition and their structures were thoroughly investigated in the gas phase, in solution, and in the solid state by employing DFT calculations, NMR spectroscopy, and single-crystal X-ray diffraction, respectively. On the molecular level, their structure is governed by the strong preference of the triazole-pyridazine linkages for the anti-conformation. The supramolecular organization of the molecules in the crystalline solid is controlled by π-stacking, C-H⋅⋅⋅π as well as C-F⋅⋅⋅H interactions. The latter can conveniently be tuned by the number and position of fluorine substituents in the terminal phenyl units, giving rise to either herringbone-like, 1D or 2D lamellar packing. Electrochemistry and optical spectroscopy of all compounds suggest that they might find use as electron-transporting/hole-blocking materials in organic electronics.

Noncovalent Halogen Bonding as a Mechanism for Gas-Phase Clustering

Gas-phase clustering of nonionizable iodylbenzene (PhIO₂) is attributed to supramolecular halogen bonding. Electrospray ionization results in the formation of ions of proton-charged and preferably sodium-charged clusters assignable to [H(PhIO₂) _n ]⁺, n = 1-7; [Na(PhIO₂) _n ]⁺, n = 1-6; [Na₂(PhIO₂) _n ]²⁺, n = 7-20; [HNa(PhIO₂) _n ]²⁺, n = 6-19; [HNa₂(PhIO₂) _n ]³⁺, n = 15-30; and [Na₃(PhIO₂) _n ]³⁺, n = 14-30. The largest cluster detected has a supramolecular mass of 7147 Da. Electronic structure calculations using the M06-2X functional with the 6-311++G(d,p) basis set for C, H, and O, and LANL2DZ basis set for I and Na predict 298 K binding enthalpies for the protonated and sodiated iodylbenzene dimers and trimers are greater than 180 kJ/mol. This is exceptionally high in comparison with other protonated and sodiated clusters with well-established binding enthalpies. Strongly halogen-bonded motifs found in the crystalline phases of PhIO₂ and its derivatives serve as models for the structures of larger gas-phase clusters, and calculations on simple model gas-phase dimer and trimer clusters result in similar motifs. This is the first account of halogen bonding playing an extensive role in gas-phase associations. Graphical Abstract ᅟ.

Synthesis and structural studies of 1,4-di(2-pyridyl)-1,2,3-triazole dpt and its transition metal complexes; a versatile and subtly unsymmetric ligand

Structural analysis of the 1,4-di(2-pyridyl)-1,2,3-triazole ligand and its transition metal complexes of varying lability demonstrate the coordination chemistry selectivity of this subtly unsymmetric ligand.

A phenanthroline-derived ligand and its complexation with Pd(ii): from ligand design, synthesis and Pd(ii) complexes structures to its application

This paper reports the first example of a phenanthroline-derived bis-opened-triazine ligand showing high selectivity and fast extraction rate toward Pd(ii).

Probing bistability in FeIIand CoIIcomplexes with an unsymmetrically substituted quinonoid ligand

A quinone ligand with a [O,O,O,N] donor set is presented. Its Fe^IIcomplex displays bistability as a function of temperature, pressure and photoexcitation and its Co^IIcomplex displays a redox-induced spin-state change.

The btp [2,6-bis(1,2,3-triazol-4-yl)pyridine] binding motif: a new versatile terdentate ligand for supramolecular and coordination chemistry

Ligands containing the btp [2,6-bis(1,2,3-triazol-4-yl)pyridine] motif have appeared with increasing regularity over the last decade. This class of ligands, formed in a one pot ‘click’ reaction, has been studied for various purposes, such as for generating d and f metal coordination complexes and supramolecular self-assemblies, and in the formation of dendritic and polymeric networks, etc. This review article introduces btp as a novel and highly versatile terdentate building block with huge potential in inorganic supramolecular chemistry. We will focus on the coordination chemistry of btp ligands with a wide range of metals, and how it compares with other classical pyridyl and polypyridyl based ligands, and then present a selection of applications including use in catalysis, enzyme inhibition, photochemistry, molecular logic and materials, e.g. polymers, dendrimers and gels. The photovoltaic potential of triazolium derivatives of btp and its interactions with anions will also be discussed.

Self-assembly formation of a healable lanthanide luminescent supramolecular metallogel from 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligands

The self-assembly and rheological studies of self-healing Eu(iii) luminescent metallogels from a btp (2,6-bis(1,2,3-triazol-4-yl)pyridine) ligand is described.

Isothermal titration calorimetry study of a bistable supramolecular system: reversible complexation of cryptand[2.2.2] with potassium ions

Isothermal titration calorimetry (ITC) is used to investigate the thermodynamics of the complexation of potassium ions by 1,10-diaza-4,7,13,16,21,24-hexaoxabicyclo[8.8.8]hexacosane (cryptand[2.2.2]) in aqueous solution. By changing the pH of the solution it was possible to trigger the reversible complexation/decomplexation of the cryptand in consecutive in situ experiments and to assess for the first time the use of ITC to monitor the thermodynamics of a bistable system.

Ruthenium complexes of tripodal ligands with pyridine and triazole arms: subtle tuning of thermal, electrochemical, and photochemical reactivity

Electrochemical and photochemical bond-activation steps are important for a variety of chemical transformations. We present here four new complexes, [Ru(L(n) )(dmso)(Cl)]PF6 (1-4), where L(n) is a tripodal amine ligand with 4-n pyridylmethyl arms and n-1 triazolylmethyl arms. Structural comparisons show that the triazoles bind closer to the Ru center than the pyridines. For L(2) , two isomers (with respect to the position of the triazole arm, equatorial or axial), trans-2sym and trans-2un , could be separated and compared. The increase in the number of the triazole arms in the ligand has almost no effect on the Ru(II) /Ru(III) oxidation potentials, but it increases the stability of the RuSdmso bond. Hence, the oxidation waves become more reversible from trans-1 to trans-4, and whereas the dmso ligand readily dissociates from trans-1 upon heating or irradiation with UV light, the RuS bond of trans-4 remains perfectly stable under the same conditions. The strength of the RuS bond is not only influenced by the number of triazole arms but also by their position, as evidenced by the difference in redox behavior and reactivity of the two isomers, trans-2sym and trans-2un . A mechanistic picture for the electrochemical, thermal, and photochemical bond activation is discussed with data from NMR spectroscopy, cyclic voltammetry, and spectroelectrochemistry.

Copper(ii) complexes supported by click generated mixed NN, NO, and NS 1,2,3-triazole based ligands and their catalytic activity in azide–alkyne cycloaddition

Four copper complexes supported by mixed NO, NN and NS-1,2,3-triazoles are reported. Their catalytic activity in the CuAAC process is demonstrated.

Azobenzene-based difunctional halogen-bond donor: towards the engineering of photoresponsive co-crystals

Halogen bonding is emerging as a powerful non-covalent interaction in the context of supramolecular photoresponsive materials design, particularly due to its high directionality. In order to obtain further insight into the solid-state features of halogen-bonded photoactive molecules, three halogen-bonded co-crystals containing an azobenzene-based difunctional halogen-bond donor molecule, (E)-bis(4-iodo-2,3,5,6-tetrafluorophenyl)diazene, C12F8I2N2, have been synthesized and structurally characterized by single-crystal X-ray diffraction. The crystal structure of the non-iodinated homologue (E)-bis(2,3,5,6-tetrafluorophenyl)diazene, C12H2F8N2, is also reported. It is demonstrated that the studied halogen-bond donor molecule is a reliable tecton for assembling halogen-bonded co-crystals with potential photoresponsive behaviour. The azo group is not involved in any specific intermolecular interactions in any of the co-crystals studied, which is an interesting feature in the context of enhanced photoisomerization behaviour and photoactive properties of the material systems.