Selective iron-catalyzed oxidation of phenols and arenes with hydrogen peroxide: synthesis of vitamin e intermediates and vitamin K(3)

Dearomative syn-Dihydroxylation of Naphthalenes with a Biomimetic Iron Catalyst

Arenes are interesting feedstocks for organic synthesis because of their natural abundance. However, the stability conferred by aromaticity severely limits their reactivity, mostly to reactions where aromaticity is retained. Methods for oxidative dearomatization of unactivated arenes are exceedingly rare but particularly valuable because the introduction of Csp3-O bonds transforms the flat aromatic ring in 3D skeletons and confers the oxygenated molecules with a very rich chemistry suitable for diversification. Mimicking the activity of naphthalene dioxygenase (NDO), a non-heme iron-dependent bacterial enzyme, herein we describe the catalytic syn-dihydroxylation of naphthalenes with hydrogen peroxide, employing a sterically encumbered and exceedingly reactive yet chemoselective iron catalyst. The high electrophilicity of hypervalent iron oxo species is devised as a key to enabling overcoming the aromatically promoted kinetic stability. Interestingly, the first dihydroxylation of the arene renders a reactive olefinic site ready for further dihydroxylation. Sequential bis-dihydroxylation of a broad range of naphthalenes provides valuable tetrahydroxylated products in preparative yields, amenable for rapid diversification.

Super-magnetization of Co-pectin/gelatin biocomposite for selective synthesis vitamin K3: Design, fabrication and revealing role of the stabilizers

High pollution and low productivity of the traditional method for synthesis of vitamin group K require an efficient, low-cost, and environmentally sustainable biocatalyst as a greener process. These have encouraged us to design and fabricate a series of novel Co NPs impregnated pectin-gelatin (Co@PTNC, Co@GTNC & Co@PT_0.7GT_0.3NC) and grafted pectin-gelatin modified magnetic beads (Co@MPT_0.7GT_0.3NC) by the in situ reduction-precipitation procedure and chemical application in the selective synthesis of vitamin K3 without any promoters or ligands. The chemical structure and morphological properties were fully characterized. Additionally, the influence of structural parameters (i.e., kind of stabilizer with different ratio (n_PT/n_GT), amount of Co loading, durability, size, distribution, and Leaching test) and operating parameters (i.e., reaction time, reaction temperature, nature of the solvent, and concentration of oxidant) on the efficacy of the biocatalysts was evaluated in detail. The green synthesis involves several advantages, like the heterogeneous nature of catalysts, environmentally-friendly and mild conditions, high recovery efficiency due to superparamagnetism, high activity, and the sustainable performance of the biocatalyst.

Menadione: a platform and a target to valuable compounds synthesis

Naphthoquinones are important natural or synthetic compounds belonging to the general class of quinones. Many compounds in this class have become drugs that are on the pharmaceutical market for the treatment of various diseases. A special naphthoquinone derivative is menadione, a synthetic naphthoquinone belonging to the vitamin K group. This compound can be synthesized by different methods and it has a broad range of biological and synthetic applications, which will be highlighted in this review.

Organophotocatalytic Aerobic Oxygenation of Phenols in a Visible-Light Continuous-Flow Photoreactor

A mild photocatalytic phenol oxygenation enabled by a continuous-flow photoreactor using visible light and pressurized air is described herein. Products for wide-ranging applications, including the synthesis of vitamins, were obtained in high yields by precisely controlling principal process parameters. The reactor design permits low organophotocatalyst loadings to generate singlet oxygen. It is anticipated that the efficient aerobic phenol oxygenation to benzoquinones and p-quinols contributes to sustainable synthesis.

Highly Active Trifloaluminate Ionic Liquids as Recyclable Catalysts for Green Oxidation of 2,3,6-Trimethylphenol to Trimethyl-1,4-Benzoquinone

An effective method for the synthesis of 2,3,6-trimethyl-1,4-benzoquinone via the oxidation of 2,3,6-trimethylphenol as the key step in the in the preparation of vitamin E was presented. An aqueous solution of H2O2 was used as the oxidant and Lewis acidic trifloaluminate ionic liquids [emim][OTf]-Al(OTf)3, χAl(OTf)3 = 0.25 or 0.15 as catalysts. Trifloaluminate ionic liquids were synthesised by the simple reaction between 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (triflate) [emim][OTf] and aluminium triflate used in sub-stoichiometric quantities. The influence of the reaction parameters on the reaction course, such as the amount and concentration of the oxidant, the amount of catalyst, the amount and the type of organic solvent, temperature, and the reaction time was investigated. Finally, 2,3,6-trimethyl-1,4-benzoquinone was obtained in high selectivity (99%) and high 2,3,6-trimethylphenol conversion (84%) at 70 °C after 2 h of oxidation using a 4-fold excess of 60% aqueous H2O2 and acetic acid as the solvent. The catalytic performance of trifloaluminate ionic liquids supported on multiwalled carbon nanotubes (loading of active phase: 9.1 wt.%) was also demonstrated. The heterogeneous ionic liquids not only retained their activity compared to the homogenous counterparts, but also proved to be a highly recyclable catalysts.

Stable Non-Covalent Co(Salphen)-Based Polymeric Catalyst for Highly Efficient and Selective Oxidation of 2,3,6-Trimethylphenol

Developing highly efficient catalyst systems for phenol-quinone transformation is of great significance in the chemical/biological industries. Herein, we reported a novel heterogenous catalytic system based on Co(Salphen) supramolecular polymers (CSP), which delivered an excellent catalytic performance in the oxidation of 2,3,6-trimethylphenol (TMP) under mild conditions. The CSP were constructed through a simple self-assembled process between BiCo(Salphen) complex and 4,4-dipyridine. By applying BiCo-BiPy1:1 CSP as the catalyst, 2,3,5-trimethyl-1,4-benzoquinone (TMBQ) could be obtained with an excellent conversion (>99%) and selectivity over 99% under mild reaction conditions (30 °C, 0.1 MPa). In addition, it can be recycled at least five times without substantial decline in catalytic activities (conversion and selectivity), suggesting its excellent stability and recyclability. This work may provide guidance on designing and building valuable catalysts for environmentally friendly and cost-effective oxidation reactions.

Oxidation of Electron-Rich Arenes Using HFIP-UHP System

The straightforward oxidation of electron-rich arenes, namely, phenols, naphthols, and anisole derivatives, under mild reaction conditions, is described by means of the use of an environmentally benign HFIP-UHP system. The corresponding quinones or hydroxylated arenes were obtained in moderate to good yields.

An efficient synthesis of 2,3,5-trimethylbenzoquinone by metal-free oxidation of 1,2,4-trimethylbenzene

The oxidation of 1,2,4-trimethylbenzene with phthaloyl peroxide has been investigated under solvent-free and optimized conditions. 2,3,5-Trimethylbenzoquinone was obtained with great purity in 92% yield at 95% conversion of 1,2,4-trimethylbenzene at 120°C for 2.5 h under solvent-free conditions. The important factors such as the efficiency of the different cyclic acid anhydrides or carboxylic acid peroxides, the concentration of phthalic anhydride and 30% H2O2, the reaction time, the effect of solvent system, and the reaction temperature have been studied. An important advantage of this oxidizing system, aside from the organic solvent-free conditions, is that it is non-toxic, eco-friendly, and inexpensive. In addition, this methodology will be of great use in the preparation of commercially valuable benzoquinones from the corresponding aromatic compounds.

Bio-inspired iron-catalyzed oxidation of alkylarenes enables late-stage oxidation of complex methylarenes to arylaldehydes

It is a long-standing challenge to achieve efficient and highly selective aerobic oxidation of methylarenes to benzaldehydes, owing to overoxidation problem stemming from the oxidizability of benzaldehyde far higher than the toluene under usual aerobic conditions. Herein we report a bio-inspired iron-catalyzed polymethylhydrosiloxane-promoted aerobic oxidation of methylarenes to benzaldehydes with high yields and selectivities. Notably, this method can tolerate oxidation-labile and reactive boronic acid group, which is normally required to be transformed immediately after its introduction, and represents a significant advance in the area of the chemistry of organoboronic acids, including the ability to incorporate both aldehyde and ketone functionalities into unprotected arylboronic acids, a class that can be difficult to access by current means. The robustness of this protocol is demonstrated on the late-stage oxidation of complex bioactive molecules, including dehydroabietic acid, Gemfibrozil, Tocopherol nicotinate, a complex polyol structure, and structurally complex arylboronic acids.

Oxidation of toluenes to benzaldehydes is usually accompanied by overoxidation products. Here, the authors report an iron-catalysed aerobic oxidation of methylarenes to benzaldehydes with high yields and selectivities, even in presence of boronic acid groups and in complex natural products and drugs.

Catalytic oxidation of aromatic hydrocarbons by a molecular iron–NHC complex

An iron–NHC complex bearing a tetradentate bis(N-heterocyclic carbene) ligand is applied as catalyst for the oxidation of methyl substituted arene substrates.

Molecular iron complexes as catalysts for selective C–H bond oxygenation reactions

This feature article summarises recent developments in homogeneous C–H bond oxygenation catalysed by molecular iron complexes.

Iron-catalyzed/mediated oxidative transformation of C–H bonds

Iron-catalyzed/mediated C–H bond oxidation has been demonstrated as one of practical and straightforward tools in synthetic chemistry.

Fe-catalyzed one-pot synthesis of 1,3-di- and 1,3,5-trisubstituted pyrazoles from hydrazones and vicinal diols

An iron-catalyzed route for the regioselective synthesis of 1,3- and 1,3,5-substituted pyrazoles from the reaction of diarylhydrazones and vicinal diols has been developed. This method was found to be practical with wide substrate scope.

EPR, 1H and 2H NMR, and reactivity studies of the iron-oxygen intermediates in bioinspired catalyst systems

Complexes [(BPMEN)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [(TPA)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (2, TPA = tris(2-pyridylmethyl)amine) are among the best nonheme iron-based catalysts for bioinspired oxidation of hydrocarbons. Using EPR and (1)H and (2)H NMR spectroscopy, the iron-oxygen intermediates formed in the catalyst systems 1,2/H(2)O(2); 1,2/H(2)O(2)/CH(3)COOH; 1,2/CH(3)CO(3)H; 1,2/m-CPBA; 1,2/PhIO; 1,2/(t)BuOOH; and 1,2/(t)BuOOH/CH(3)COOH have been studied (m-CPBA is m-chloroperbenzoic acid). The following intermediates have been observed: [(L)Fe(III)(OOR)(S)](2+), [(L)Fe(IV)═O(S)](2+) (L = BPMEN or TPA, R = H or (t)Bu, S = CH(3)CN or H(2)O), and the iron-oxygen species 1c (L = BPMEN) and 2c (L = TPA). It has been shown that 1c and 2c directly react with cyclohexene to yield cyclohexene oxide, whereas [(L)Fe(IV)═O(S)](2+) react with cyclohexene to yield mainly products of allylic oxidation. [(L)Fe(III)(OOR)(S)](2+) are inert in this reaction. The analysis of EPR and reactivity data shows that only those catalyst systems which display EPR spectra of 1c and 2c are able to selectively epoxidize cyclohexene, thus bearing strong evidence in favor of the key role of 1c and 2c in selective epoxidation. 1c and 2c were tentatively assigned to the oxoiron(V) intermediates.