Formation of surface traps on quantum dots by bidentate chelation and their application in low-potential electrochemiluminescent biosensing

Unraveling Mechanisms of Highly Efficient Yet Stable Electrochemiluminescence from Quantum Dots

With CdSe/CdS/ZnS core/shell/shell quantum dots (QDs) as the model system, time- and potential-resolved spectroelectrochemical measurements are successfully applied for studying the general mechanisms and kinetics of electrochemiluminescence (ECL) generation. The rate constant of electron injection from the cathode into a QD to form a negatively charged QD (QD-) increases monotonically from -0.88 V to -1.2 V (vs Ag/AgCl). Mainly due to the deep LUMO of the QDs, the resulting QD- as the key intermediate for ECL generation is structurally stable and possesses very slow spontaneous deionization channels. The latter (the main non-ECL channels) are usually 3-4 orders of magnitude slower than the rate constant of the successive hole injection from an active co-reactant into a QD-. The kinetic studies quantify the internal ECL quantum yield of ideal QD ECL emitters to be nearly identical to that of photoluminescence, which is near unity for the current system. Identification of the key intermediate, discovery of the related elementary steps, and determination of all rate constants not only establish a general framework for understanding ECL generation but also offer basic design rules for ECL emitters.

Electrochemiluminescence of Semiconductor Quantum Dots and Its Biosensing Applications: A Comprehensive Review

Electrochemiluminescence (ECL) is the chemiluminescence triggered by electrochemical reactions. Due to the unique excitation mode and inherent low background, ECL has been a powerful analytical technique to be widely used in biosensing and imaging. As an emerging ECL luminophore, semiconductor quantum dots (QDs) have apparent advantages over traditional molecular luminophores in terms of luminescence efficiency and signal modulation ability. Therefore, the development of an efficient ECL system with QDs as luminophores is of great significance to improve the sensitivity and detection flux of ECL biosensors. In this review, we give a comprehensive summary of recent advances in ECL using semiconductor QDs as luminophores. The luminescence process and ECL mechanism of semiconductor QDs with various coreactants are discussed first. Specifically, the influence of surface defects on ECL performance of semiconductor QDs is emphasized and several typical ECL enhancement strategies are summarized. Then, the applications of semiconductor QDs in ECL biosensing are overviewed, including immunoassay, nucleic acid analysis and the detection of small molecules. Finally, the challenges and prospects of semiconductor QDs as ECL luminophores in biosensing are featured.

Semiconductor Quantum Dots as Target Analytes: Properties, Surface Chemistry and Detection

Since the discovery of Quantum Dots (QDs) by Alexey I. Ekimov in 1981, the interest of researchers in that particular type of nanomaterials (NMs) with unique optical and electrical properties has been increasing year by year. Thus, since 2009, the number of scientific articles published on this topic has not been less than a thousand a year. The increasing use of QDs due to their biomedical, pharmaceutical, biological, photovoltaics or computing applications, as well as many other high-tech uses such as for displays and solid-state lighting (SSL), has given rise to a considerable number of studies about its potential toxicity. However, there are a really low number of reported studies on the detection and quantification of QDs, and these include ICP-MS and electrochemical analysis, which are the most common quantification techniques employed for this purpose. The knowledge of chemical phenomena occurring on the surface of QDs is crucial for understanding the interactions of QDs with species dissolved in the dispersion medium, while it paves the way for a widespread use of chemosensors to facilitate its detection. Keeping in mind both human health and environmental risks of QDs as well as the scarcity of analytical techniques and methodological approaches for their detection, the adaptation of existing techniques and methods used with other NMs appears necessary. In order to provide a multidisciplinary perspective on QD detection, this review focused on three interrelated key aspects of QDs: properties, surface chemistry and detection.

Efficient and Stable CF3PEAI-Passivated CsPbI3 QDs toward Red LEDs

Oleylamine and oleic acid are common organic capping ligands used in the hot injection preparation of perovskite quantum dots (QDs). Their labile nature is responsible for the poor colloidal stability and conductivity that affect the performance of perovskite QD light-emitting diodes (LEDs). We introduced 4-trifluoro phenethylammonium iodide (CF₃PEAI) directly in the synthesis and found that CF₃PEAI efficiently modified the I^- vacancy defects on the QD surface and partially substituted the surface capping ligand oleylamine. The strong electron pulling ability of F in CF₃PEAI results in a more positive -NH₃⁺ terminal compared to that of PEAI, which promotes tight bonding of CF₃PEAI on the surface of CsPbI₃ QDs. As a result, we achieved bright QDs with a photoluminescence quantum yield of 92% and efficient red LEDs. The maximal luminance was improved to 4550 cd m^-2 for 685 nm red light, which was nearly 4.6-fold of the LEDs with plain CsPbI₃ QDs. Additionally, the peak external quantum efficiency reached 12.5%.

Development of portable CdS QDs screen-printed carbon electrode platform for electrochemiluminescence measurements and bioanalytical applications

In this work, a portable and disposable screen-printed electrode-based platform for CdS QDs electrochemiluminescence (ECL) detection is presented. CdS QDs were synthesized in aqueous media and placed on top of carbon electrodes by drop casting. The CdS QDs spherical assemblies consisted of nanoparticles about 4 nm diameters and served as ECL sensitizers to enzymatic assays. The nanoparticles were characterized by optical techniques, TEM and XPS. Besides, the electrode modification process was optimized and further studied by SEM and confocal microscopy. The ECL emission from CdS QDs was triggered with H₂O₂ as cofactor and enzymatic assays were employed to modulate the CdS QDs ECL signal by blocking the surface or generating H₂O₂ in situ. Thiol-bearing compounds such as thiocholine generated through the hydrolysis of acetylthiocholine by acetylcholinesterase (AChE) interacted with the surface of CdS QDs thus blocking the ECL. The biosensor showed a linear range up to 5 mU mL^-1 and a detection limit of 0.73 mU mL^-1 for AChE. Moreover, the inhibition mechanism of the enzyme was studied by using 1,5-bis-(4-allyldimethylammonium-phenyl)pentan-3-one dibromide with a detection limit of 79.22 nM. Furthermore, the natural production of H₂O₂ from the oxidation of methanol by the action of alcohol oxidase was utilized to carry out the ECL process. This enzymatic assay presented a linear range up to 0.5 mg L^-1 and a detection limit of 61.46 μg L^-1 for methanol. The reported methodology shows potential applications for the development of sensitive and easy to hand biosensors and was applied to the determination of AChE and methanol in real samples.

Tetraphenylenthene-Based Conjugated Microporous Polymer for Aggregation-Induced Electrochemiluminescence

We demonstrate the aggregation-induced electrochemiluminescence (AIECL) generated by 1,1,2,2-tetrakis(4-bromophenyl)ethane (TBPE)-based conjugated microporous polymers (TBPE-CMPs) and its biosensing application. We synthesized three TBPE-CMPs (i.e., TBPE-CMP-1, -2, -3) using three different molecules including tris(4-ethynylphenyl)amine (TEPA), 4,4'-diethynylbiphenyl (DEP), and 2,4,6-tris(4-ethynylphenyl)-1,3,5-triazine (TEPT). The TBPE-CMPs can act as electrochemiluminescence (ECL) emitters to generate AIECL. Among them, TBPE-CMP-1 exhibits the highest ECL efficiency (1.72%) due to the improved electron-hole recombination efficiency and efficient suppression of nonradiative transition. Moreover, the ECL properties of TBPE-CMPs can be tuned by the introduction of different conjugated molecules that can decrease the energy gap to facilitate the injection of an electron into the conjugated polymer backbone. Importantly, TBPE-CMP-1 can be used to construct an ECL sensor for the detection of dopamine, whose electro-oxidation products (e.g., leucodopaminechrome (LDC), dopaminechrome (DC), 5,6-dihydroxyindole (DHI), and 5,6-indolequinone (IDQ)) may function as energy acceptors to quench the ECL emission of TBPE-CMP-1. This ECL sensor exhibits high sensitivity and good anti-interference capability against ascorbic acid and uric acid.

Ligand-free preparation of polymer/CuInS2 nanocrystal films and the influence of 1,3-benzenedithiol on their photovoltaic performance and charge recombination properties

Bulk heterojunction solar cells based on conjugated polymer donors and fullerene-derivative acceptors have received much attention in the last decade. Alternative acceptors like organic non-fullerene acceptors or inorganic nanocrystals have been investigated to a lesser extent; however, they also show great potential. In this study, one focus is set on the investigation of the in situ growth of copper indium sulfide nanocrystals in a conjugated polymer matrix. This preparation method allows the fabrication of a hybrid active layer without long-chain ligands, which could hinder charge separation and transport. In contrast, surfactants for the passivation of the nanocrystal surface are missing. To tackle this problem, we modified the absorber layer with 1,3-benzenedithiol and investigated the influence on charge transfer and solar cell performance. Using ToF-SIMS measurements, we could show that 1,3-benzenedithiol is successfully incorporated and homogeneously distributed in the absorber layer, which significantly increases the power conversion efficiency of the corresponding solar cells. This can be correlated to an improved charge transfer between the nanocrystals and the conjugated polymer as revealed by transient absorption spectroscopy as well as prolonged carrier lifetimes as disclosed by transient photovoltage measurements.

Multi-segmented CdS-Au nanorods for electrochemiluminescence bioanalysis

In this study, we have developed a programmable electrochemiluminescence (ECL) system based on multi-segmented CdS-Au nanorod arrays with a sequential and highly tunable structure. The nanorod arrays were synthesized by an electrodeposition method using anodic aluminum oxide (AAO) as the template in which the Au and CdS segments were alternately electrodeposited. Compared to pure CdS nanorod arrays, multi-segmented CdS-Au nanorod arrays have showed a better ECL performance, which can be attributed to two factors: the favorable electron transfer and the surface plasma resonance (SPR) effect of the Au segment. On the one hand, we demonstrated that the Au segment can increase the charge transfer rate of CdS, which is beneficial for the ECL process because the generation of the radical state needs to accept electrons and then generate the radical state. On the other hand, the SPR of Au plasmon-induced local electromagnetic field enhancement can increase the radiative decay rate of CdS which makes the ECL process more efficient and lead to a higher ECL intensity. And also, an ECL sensor with multi-segmented CdS-Au nanorod arrays was constructed to detect prostate protein antigen (PSA). This study provides some basis for designing high-performance ECL emission materials and the construction of biosensors.

One-pot synthesis of the stable CdZnTeS quantum dots for the rapid and sensitive detection of copper-activated enzyme

Galactose oxidase is a copper-activated enzyme and have a vital role in metabolism of galactose. Much of the work is focused on determining the amount of galactose in the blood rather than measuring the amount of galactose oxidase to urge the galactosemia patients to restrict milk intake. Here, a simple and effective method was developed for Cu²⁺ and copper-activated enzyme detection based on homogenous alloyed CdZnTeS quantum dots (QDs). Meso- 2,3-dimercaptosuccinic acid (DMSA) was used as the reducing agent for preparing QDs and the highest quantum yield of CdZnTeS QDs was 69.4%. In addition, the as-prepared CdZnTeS QDs show superior fluorescence properties, such as good photo-/chemical stability. The DMSA was the surface ligand of the QDs, containing abundant -SH and -COOH, thus the surface ligands have a high affinity with Cu²⁺. Therefore, this developed probe can be applied for Cu²⁺ and galactose oxidase detection and shows a good sensitivity in the buffer. Then, this probe was successfully used for Cu²⁺ and galactose oxidase detection in real samples with the satisfactory results. The proposed fluorescence quenching strategy gives a new and simple insight for enzyme assay without the enzyme-catalyzed reaction.

Nanosensing of Pesticides by Zinc Oxide Quantum Dot: An Optical and Electrochemical Approach for the Detection of Pesticides in Water

Present study reveals the low concentrations (∼4 ppm) of pesticide sensing vis-à-vis degradation of pesticides with the help of nontoxic zinc oxide quantum dots (QD). In our study, we have taken four different pesticides viz., aldrin, tetradifon, glyphosate, and atrazine, which are widely used in agriculture and have structural dissimilarities/diversity. By using optical sensing techniques such as steady state and time-resolved fluorescence, we have analyzed the detailed exciton dynamics of QD in the presence of different pesticides. It has been found that the pesticide containing good leaving groups (-Cl) can interact with QD promptly and has high binding affinity (∼10⁷ M^-1). The different binding signatures of QD with different pesticides enable us to differentiate between the pesticides. Time resolved fluorescence spectroscopy provides significant variance (∼150-300 ns) for different pesticides. Furthermore, a large variation (10⁵ Ω to 7 × 10⁴ Ω) in the resistance of QD in the presence of different pesticides was revealed by electrochemical sensing technique. Moreover, during the interaction with pesticides, QD can also act as a photocatalyst to degrade pesticides. Present investigation explored the fact that the rate of degradation is positively affected by the binding affinity, i.e., the greater the binding, the greater is the degradation. What is more, both optical and electrochemical measurements of QD, in tandem, as described in our study could be utilized as the pattern recognition sensor for detection of several pesticides.

ATP synthesis in the energy metabolism pathway: a new perspective for manipulating CdSe quantum dots biosynthesized in Saccharomyces cerevisiae

Due to a growing trend in their biomedical application, biosynthesized nanomaterials are of great interest to researchers nowadays with their biocompatible, low-energy consumption, economic, and tunable characteristics. It is important to understand the mechanism of biosynthesis in order to achieve more efficient applications. Since there are only rare studies on the influences of cellular energy levels on biosynthesis, the influence of energy is often overlooked. Through determination of the intracellular ATP concentrations during the biosynthesis process, significant changes were observed. In addition, ATP synthesis deficiency caused great decreases in quantum dots (QDs) biosynthesis in the Δatp1, Δatp2, Δatp14, and Δatp17 strains. With inductively coupled plasma-atomic emission spectrometry and atomic absorption spectroscopy analyses, it was found that ATP affected the accumulation of the seleno-precursor and helped with the uptake of Cd and the formation of QDs. We successfully enhanced the fluorescence intensity 1.5 or 2 times through genetic modification to increase ATP or SeAM (the seleno analog of S-adenosylmethionine, the product that would accumulate when ATP is accrued). This work explains the mechanism for the correlation of the cellular energy level and QDs biosynthesis in living cells, demonstrates control of the biosynthesis using this mechanism, and thus provides a new manipulation strategy for the biosynthesis of other nanomaterials to widen their applications.

Quantum dots assisted laser desorption/ionization mass spectrometric detection of carbohydrates: qualitative and quantitative analysis

A quantum dots (QDs) assisted laser desorption/ionization mass spectrometric (QDA-LDI-MS) strategy was proposed for qualitative and quantitative analysis of a series of carbohydrates. The adsorption of carbohydrates on the modified surface of different QDs as the matrices depended mainly on the formation of hydrogen bonding, which led to higher MS intensity than those with conventional organic matrix. The effects of QDs concentration and sample preparation method were explored for improving the selective ionization process and the detection sensitivity. The proposed approach offered a new dimension to the application of QDs as matrices for MALDI-MS research of carbohydrates. It could be used for quantitative measurement of glucose concentration in human serum with good performance. The QDs served as a matrix showed the advantages of low background, higher sensitivity, convenient sample preparation and excellent stability under vacuum. The QDs assisted LDI-MS approach has promising application to the analysis of carbohydrates in complex biological samples.

In situ activation of CdS electrochemiluminescence film and its application in H₂S detection

Nanocrystals (NCs) usually suffer from weak electrogenerated chemiluminescence (ECL) emissions compared with conventional luminescent reagents like Ru(bpy)3(2+). In this work, we proposed a simple in situ activation approach by dipping CdS NCs film on glass carbon electrode (CdS NCs/GCE) in an activation solution containing H2O2 and citric acid, resulting in a ~58-fold enhancement of ECL intensity in the presence of coreactant H2O2. During activation, CdS NCs were oxidized by H2O2 to smaller ones which resulted in more surface S vacancies; meanwhile, citric acid played an important role in stabilizing NCs. The ECL enhancing mechanism was investigated in detail, and the coordination of H2O2 to surface excess Cd(2+) ions (S vacancies) on the CdS NCs surface formed in activation was the main factor which could stabilize the electrogenerated radicals, resulting in an enhanced ECL. ECL from the activated CdS NCs/GCE could be quenched in Na2S solution due to the bonding of S(II) to excess Cd(2+) ions on the surface of CdS NCs. On the basis of this, we then used the activated CdS NCs/GCE as an ECL probe for the detection of Na2S which showed good performance including a wide linear range of 5 nM to 20 μM and good anti-interference ability. Moreover, this ECL probe was successfully applied for hydrogen sulfide (H2S) detection in a biological system.

Chronopotentiometric synthesis of quantum dots with efficient surface-derived near-infrared electrochemiluminescence for ultrasensitive microchip-based ion-selective sensing

Metalantidote-stabilized QDs were synthesized via hydrodynamic chronopotentiometry with efficient NIR-ECL derived from the unique surface states for ultrasensitive microchip-based ion-selective sensing.

Disposable electrochemiluminescent biosensor using bidentate-chelated CdTe quantum dots as emitters for sensitive detection of glucose

A novel disposable solid-state electrochemiluminescent (ECL) biosensor was fabricated by immobilizing glucose oxidase and surface-unpassivated CdTe quantum dots (QDs) on a screen-printed carbon electrode (SPCE). The surface morphology of the biosensor was characterized with scanning electron microscopy and atomic force microscopy. With dissolved O(2) as an endogenous coreactant, QDs/SPCE showed strong ECL emission in pH 9.0 HCl-Tris buffer solution with low ECL peak potential at -0.89 V. The ECL intensity was twice that with hydrogen peroxide as coreactant at the same concentration. This phenomenon meant the ECL decreased upon consumption of dissolved O(2) and thus could be applied to the construction of oxidase-based ECL biosensors. With glucose oxidase as a model enzyme, the biosensor showed rapid response to glucose with a linear range of 0.8 to 100 μM and a detection limit of 0.3 μM. Further detection of glucose contained in human serum samples showed acceptable sensitivity and selectivity. This work provided a promising application of QDs in ECL-based disposable biosensors.

Enhanced electrochemiluminescence quenching of CdS:Mn nanocrystals by CdTe QDs-doped silica nanoparticles for ultrasensitive detection of thrombin

This work reports an aptasensor for ultrasensitive detection of thrombin based on remarkably efficient energy-transfer induced electrochemiluminescence (ECL) quenching from CdS:Mn nanocrystals (NCs) film to CdTe QDs-doped silica nanoparticles (CdTe/SiO(2) NPs). CdTe/SiO(2) NPs were synthesized via the Stöber method and showed black bodies' strong absorption in a wide spectral range without excitonic emission, which made them excellent ECL quenchers. Within the effective distance of energy scavenging, the ECL quenching efficiency was dependent on the number of CdTe QDs doped into the silica NPs. Using ca. 200 CdTe QDs doped silica NPs on average of 40 nm in diameter as ECL quenching labels, attomolar detection of thrombin was successfully realized. The protein detection involves a competition binding event, based on thrombin replacing CdTe/SiO(2) NPs labeled probing DNA which is hybridized with capturing aptamer immobilized on a CdS:Mn NCs film modified glassy carbon electrode surface by specific aptamer-protein affinity interactions. It results in the displacement of ECL quenching labels from CdS:Mn NCs film and concomitant ECL signal recovery. Owing to the high-content CdTe QDs in silica NP, the increment of ECL intensity (ΔI(ECL)) and the concentration of thrombin showed a double logarithmic linear correlation in the range of 5.0 aM∼5.0 fM with a detection limit of 1aM. And, the aptasensor hardly responded to antibody, bovine serum albumin (BSA), haemoglobin (Hb) and lysozyme, showing good detection selectivity for thrombin. This long-distance energy scavenging could have a promising application perspective in the detection of biological recognition events on a molecular level.