T-Shaped Ionic Liquid Crystals Based on the Imidazolium Motif: Exploring Substitution of the C-2 Imidazolium Carbon Atom

Sequential regioselective arylation of pyrazolones with diaryliodonium salts

The introduction of aromatic substituents into organic compounds significantly alters their physical and chemical characteristics. Yet, achieving precise control over the site-selectivity of arylation continues to pose a considerable challenge. We present here a controllable method for the site-selective mono-, di-, and triarylation of pyrazolone with diaryliodonium salts. The method showcases robustness, flexibility, and excellent compatibility with a broad range of functional groups. It enables control over both the site of arylation and the number of aryl additions. Specifically, three of the four substitutable positions in pyrazolone can be selectively arylated, effectively producing four products under controlled conditions. Additionally, the method supports one-pot sequential arylation, leading to an array of products with diverse aromatic substituents. Control experiments revealed the specific conditions of each reaction step.

Effect of New Analogs of Hexyloxy Phenyl Imidazoline on Quorum Sensing in Chromobacterium violaceum and In Silico Analysis of Ligand-Receptor Interactions

The increasing common occurrence of antibiotic-resistant bacteria has become an urgent public health issue. There are currently some infections without any effective treatment, which require new therapeutic strategies. An attractive alternative is the design of compounds capable of disrupting bacterial communication known as quorum sensing (QS). In Gram-negative bacteria, such communication is regulated by acyl-homoserine lactones (AHLs). Triggering of QS after bacteria have reached a high cell density allows them to proliferate before expressing virulence factors. Our group previously reported that hexyloxy phenylimidazoline (9) demonstrated 71% inhibitory activity of QS at 100 μM (IC50 = 90.9 μM) in Chromobacterium violaceum, a Gram-negative bacterium. The aim of the present study was to take 9 as a lead compound to design and synthesize three 2-imidazolines (13–15) and three 2-oxazolines (16–18), to be evaluated as quorum-sensing inhibitors on C. violaceum CV026. We were looking for compounds with a higher affinity towards the Cvi receptor of this bacterium and the ability to inhibit QS. The binding mode of the test compounds on the Cvi receptor was explored with docking studies and molecular dynamics. It was found that 8-pentyloxyphenyl-2-imidazoline (13) reduced the production of violacein (IC50 = 56.38 μM) without affecting bacterial growth, suggesting inhibition of quorum sensing. Indeed, compound 13 is apparently one of the best QS inhibitors known to date. Molecular docking revealed the affinity of compound 13 for the orthosteric site of N-hexanoyl homoserine lactone (C6-AHL) on the CviR protein. Ten amino acid residues in the active binding site of C6-AHL in the Cvi receptor interacted with 13, and 7 of these are the same as those interacting with AHL. Contrarily, 8-octyloxyphenyl-2-imidazoline (14), 8-decyloxyphenyl-2-imidazoline (15), and 9-decyloxyphenyl-2-oxazoline (18) bound only to an allosteric site and thus did not compete with C6-AHL for the orthosteric site.

Substituted Azolium Disposition: Examining the Effects of Alkyl Placement on Thermal Properties

We describe the thermal phase characteristics of a series of 4,5-bis(n-alkyl)azolium salts that were studied using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarized-light optical microscopy (POM), and synchrotron-based small- to wide-angle X-ray scattering (SWAXS) measurements. Key results were obtained for 1,3-dimethyl-4,5-bis(n-undecyl)imidazolium iodide (1-11), 1,3-dimethyl-4,5-bis(n-pentadecyl)- imidazolium iodide (1-15), and 1,2,3-trimethyl-4,5-bis(n-pentadecyl)imidazolium iodide (2), which were found to adopt enantiotropic smectic A mesophases. Liquid-crystalline mesophases were not observed for 1,3-dimethyl-4,5-bis(n-heptyl)imidazolium iodide (1-7), 3-methyl-4,5-bis(n-penta-decyl)thiazolium iodide (3), and 2-amino-4,5-bis(n-pentadecyl)imidazolium chloride (4). Installing substituents in the 4- and 5-positions of the imidazolium salts appears to increase melting points while lowering clearing points when compared to data reported for 1,3-disubstituted analogues.

Encapsulating propeller-like columnar liquid crystals with an aromatic outer shell: influence of phenoxy-terminated side chains on the phase behaviour of triphenylbenzenes

Tailoring of phase transition temperatures of columnar liquid crystals by side chain variation is often associated with an undesired change in the mesophase type and/or geometry. To overcome this problem phenoxy-terminated side chains rather than alkyl side chains were grafted onto triphenylbenzenes, which resulted in reduced clearing points, while melting points were little affected. More importantly, helical columnar self-assembly was not compromised.

Dicyanamide Salts that Adopt Smectic, Columnar, or Bicontinuous Cubic Liquid-Crystalline Mesophases

Although dicyanamide (i.e., [N(CN)₂ ]^- ) has been commonly used to obtain low-viscosity, halogen-free, room-temperature ionic liquids, liquid-crystalline salts containing such anions have remained virtually unexplored. Here we report a series of amphiphilic dicyanamide salts that, depending on their structures and compositions, adopt smectic, columnar, or bicontinuous cubic thermotropic liquid-crystalline mesophases, even at room temperature in some cases. Their thermal properties were explored by polarized light optical microscopy, differential scanning calorimetry, thermogravimetric analysis (including evolved gas analysis), and variable-temperature synchrotron X-ray diffraction. Comparison of the thermal phase characteristics of these new liquid-crystalline salts featuring "V-shaped" [N(CN)₂ ]^- anions with those of structural analogues containing [SCN]^- , [BF₄ ]^- , [PF₆ ]^- , or [CF₃ SO₃ ]^- anions indicated that not only the size of the counterion but also its shape should be considered in the development of mesomorphic salts. Collectively, these discoveries may be expected to facilitate the design of thermotropic ionic liquid crystals that form inverted-type bicontinuous cubic and other sophisticated liquid-crystalline phases.

Effect of counter ions on the mesogenic ionic N-phenylpyridiniums

Two series of ionic liquid crystals (ILCs) derived from N-phenylpyridinium 1–2 were prepared and their mesomorphic properties were investigated.

Amino acid/crown ether hybrid materials: how charge affects liquid crystalline self-assembly

To probe the influence of electrostatic interactions on the mesomorphic self-assembly and phase behaviour of hybrid liquid crystals a series of crown ether/tyrosine hybrid systems was prepared by Steglich esterification of alkyl N-(tert-butoxycarbonyl)-l-tyrosinates with 4-carboxybenzo[15]crown-5 and 4-carboxybenzo[18]crown-6. The obtained derivatives allowed further manipulations at the NH functional group and complexation of the crown ether unit with NaI to give neutral or charged hybrid materials. All compounds were investigated by differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and X-ray diffraction (XRD) measurements. Neither the variation of the N-protecting group, introduction of charge at the N-terminus nor anion exchange (Cl vs. I) resulted in mesomorphism. In contrast, N-Boc-protected and unprotected hybrids formed rectangular columnar (Col_r) mesophases with phase widths up to 35 K. NaI complexation switched these neutral thermotropic derivatives into ionic liquid crystals (ILCs) and induced a change of mesophase type from Col_r to smectic A (SmA). A comparison of experimentally obtained layer distances and theoretically calculated molecular lengths indicated bilayer SmA formation with interdigitated alkyl chains. Packing models for both mesophase types are proposed and discussed with respect to stabilizing interactions.

Development of Glassy Bicontinuous Cubic Liquid Crystals for Solid Proton-Conductive Materials

Glassy bicontinuous cubic liquid crystals are developed to be a matrix having a hydrophilic infinite periodic minimal surface (IPMS). They function as a scaffold for water, leading to the formation of a 3D continuous hydrogen-bonding network of water molecules along the IPMS. This material design is advantageous for developing novel electrolytes with rigidity and high proton conductivity.

Cu-catalyzed controllable C–H mono-/di-/triarylations of imidazolium salts for ionic functional materials

The first Cu-catalyzed direct C–H mono-, di- and triarylations of imidazolium salts with aryl iodides/bromides are reported.

Nickel-catalysed direct C2-arylation of N-heterocyclic carbenes

Direct C2-arylation of NHCs to C2-arylated imidazolium salts (III) is achieved using Ni-catalysis. The dinuclear Ni(i) species I undergoes oxidative addition with ArX to give the Ni(ii) intermediate II. Reductive elimination delivers the arylation product III and regenerates the catalyst I.

Ionic Liquid Crystals: Versatile Materials

This Review covers the recent developments (2005-2015) in the design, synthesis, characterization, and application of thermotropic ionic liquid crystals. It was designed to give a comprehensive overview of the "state-of-the-art" in the field. The discussion is focused on low molar mass and dendrimeric thermotropic ionic mesogens, as well as selected metal-containing compounds (metallomesogens), but some references to polymeric and/or lyotropic ionic liquid crystals and particularly to ionic liquids will also be provided. Although zwitterionic and mesoionic mesogens are also treated to some extent, emphasis will be directed toward liquid-crystalline materials consisting of organic cations and organic/inorganic anions that are not covalently bound but interact via electrostatic and other noncovalent interactions.

Development of structural complexity by liquid-crystal self-assembly

Since the discovery of the liquid-crystalline state of matter 125 years ago, this field has developed into a scientific area with many facets. This Review presents recent developments in the molecular design and self-assembly of liquid crystals. The focus is on new exciting soft-matter structures distinct from the usually observed nematic, smectic, and columnar phases. These new structures have enhanced complexity, including multicompartment and cellular structures, periodic and quasiperiodic arrays of spheres, and new emergent properties, such as ferroelctricity and spontaneous achiral symmetry-breaking. Comparisons are made with developments in related fields, such as self-assembled monolayers, multiblock copolymers, and nanoparticle arrays. Measures of structural complexity used herein are the size of the lattice, the number of distinct compartments, the dimensionality, and the logic depth of the resulting supramolecular structures.