Degradable Dual pH‐ and Temperature‐Responsive Photoluminescent Dendrimers

Acidic Environment-Responsive Metal Organic Framework-Mediated Dihydroartemisinin Delivery for Triggering Production of Reactive Oxygen Species in Drug-Resistant Lung Cancer

Background

Dihydroartemisinin (DHA) has emerged as a promising candidate for anticancer therapy. However, the application of DHA in clinics has been hampered by several limitations including poor bioavailability, short circulation life, and low solubility, significantly restricting its therapeutic efficacy and leading to notable side effects during the treatment.

Purpose

We present DHA-loaded zeolitic imidazolate framework-8 (D-ZIF) with controllable and targeted DHA release properties, leading to enhanced antitumor effects while reducing potential side effects.

Methods

D-ZIF was prepared by one-pot synthesis method using methylimidazole (MIM), Zn(NO3)2•6H2O and DHA. We characterized the physical and chemical properties of D-ZIF by TEM, DLS, XRD, FT-IR, and TG. We measured the drug loading efficiency and the cumulative release of DHA in different pH conditions. We evaluated the cytotoxicity of D-ZIF on renal cell carcinoma (RCC786-O), glioma cells (U251), TAX-resistant human lung adenocarcinoma (A549-TAX) cells by CCK8 in vitro. We explored the possible antitumor mechanism of D-ZIF by Western blot. We evaluated the biocompatibility and hemolysis of D-ZIF and explored the in vivo antitumor efficiency in mice model by TUNEL testing and blood biomarker evaluations.

Results

D-ZIF showed rhombic dodecahedral morphology with size of 129±7.2 nm and possessed a noticeable DHA encapsulation efficiency (72.9%). After 48 hours, D-ZIF released a cumulative 70.0% of the loaded DHA at pH 6.5, and only 42.1% at pH 7.4. The pH-triggered programmed release behavior of D-ZIF could enhance anticancer effect of DHA while minimizing side effects under normal physiological conditions. Compared with the free DHA group with 31.75% of A549-TAX cell apoptosis, the percentage of apoptotic cells was approximately 76.67% in the D-ZIF group. D-ZIF inhibited tumor growth by inducing tumor cell apoptosis through the mechanism of ROS production and regulation of Nrf2/HO-1 and P38 MAPK signaling pathways. D-ZIF showed potent effects in treating tumors with high safety in vivo.

Conclusion

This pH-responsive release mechanism enhanced the targeting efficiency of DHA towards tumor cells, thereby increasing drug concentration in tumor sites with negligible side effects. Herein, D-ZIF holds great promise for curing cancers with minimal adverse effects.

Drug Delivery Approaches to Improve Tendon Healing

Tendon injuries disrupt the transmission of forces from muscle to bone, leading to chronic pain, disability, and a large socioeconomic burden. Tendon injuries are prevalent; there are over 300,000 tendon repair procedures a year in the United States to address acute trauma or chronic tendinopathy. Successful restoration of function after tendon injury remains challenging clinically. Despite improvements in surgical and physical therapy techniques, the high complication rate of tendon repair procedures motivates the use of therapeutic interventions to augment healing. While many biological and tissue engineering approaches have attempted to promote scarless tendon healing, there is currently no standard clinical treatment to improve tendon healing. Moreover, the limited efficacy of systemic delivery of several promising therapeutic candidates highlights the need for tendon-specific drug delivery approaches to facilitate translation. This review article will synthesize the current state-of-the-art methods that have been used for tendon-targeted delivery through both systemic and local treatments, highlight emerging technologies used for tissue-specific drug delivery in other tissue systems, and outline future challenges and opportunities to enhance tendon healing through targeted drug delivery.

Responsive Nanostructure for Targeted Drug Delivery

Currently, intelligent, responsive biomaterials have been widely explored, considering the fact that responsive biomaterials provide controlled and predictable results in various biomedical systems. Responsive nanostructures undergo reversible or irreversible changes in the presence of a stimulus, and that stimuli can be temperature, a magnetic field, ultrasound, pH, humidity, pressure, light, electric field, etc. Different types of stimuli being used in drug delivery shall be explained here. Recent research progress in the design, development and applications of biomaterials comprising responsive nanostructures is also described here. More emphasis will be given on the various nanostructures explored for the smart stimuli responsive drug delivery at the target site such as wound healing, cancer therapy, inflammation, and pain management in order to achieve the improved efficacy and sustainability with the lowest side effects. However, it is still a big challenge to develop well-defined responsive nanostructures with ordered output; thus, challenges faced during the design and development of these nanostructures shall also be included in this article. Clinical perspectives and applicability of the responsive nanostructures in the targeted drug delivery shall be discussed here.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Synergistic Size and Charge Conversions of Functionalized PAMAM Dendrimers under Acidic Tumor Microenvironment

Developing nanomedicine with highly adaptive behaviors has presented great effectiveness in cancer treatment. However, the multi-functional integration of nano-therapeutic system inevitably leads to the complexity in structure and impairs the...

Recent Advancements of Specific Functionalized Surfaces of Magnetic Nano- and Microparticles as a Theranostics Source in Biomedicine

Magnetic nano- and microparticles (MNMPs) belong to a highly versatile class of colloids with actuator and sensor properties that have been broadly studied for their application in theranostics such as molecular imaging and drug delivery. The use of advanced biocompatible, biodegradable polymers and polyelectrolytes as MNMP coating materials is essential to ensure the stability of MNMPs and enable efficient drug release while at the same time preventing cytotoxic effects. In the past years, huge progress has been made in terms of the design of MNMPs. Especially, the understanding of coating formation with respect to control of drug loading and release kinetics on the molecular level has significantly advanced. In this review, recent advancements in the field of MNMP surface engineering and the applicability of MNMPs in research fields of medical imaging, diagnosis, and nanotherapeutics are presented and discussed. Furthermore, in this review the main emphasis is put on the manipulation of biological specimens and cell trafficking, for which MNMPs represent a favorable tool enabling transport processes of drugs through cell membranes. Finally, challenges and future perspectives for applications of MNMPs as theranostic nanomaterials are discussed.

Recent advances in the development and applications of nonconventional luminescent polymers

Recently, nonconventional luminescent polymers (NLPs) have emerged as the most sought-after alternative luminescent materials. This review provides a thorough description of the importance and applications of each class of state-of-the-art NLPs.

Evolution and Synthesis of Carbon Dots: From Carbon Dots to Carbonized Polymer Dots

Despite the various synthesis methods to obtain carbon dots (CDs), the bottom-up methods are still the most widely administrated route to afford large-scale and low-cost synthesis. However, as CDs are developed with increasing reports involved in producing many CDs, the structure and property features have changed enormously compared with the first generation of CDs, raising classification concerns. To this end, a new classification of CDs, named carbonized polymer dots (CPDs), is summarized according to the analysis of structure and property features. Here, CPDs are revealed as an emerging class of CDs with distinctive polymer/carbon hybrid structures and properties. Furthermore, deep insights into the effects of synthesis on the structure/property features of CDs are provided. Herein, the synthesis methods of CDs are also summarized in detail, and the effects of synthesis conditions of the bottom-up methods in terms of the structures and properties of CPDs are discussed and analyzed comprehensively. Insights into formation process and nucleation mechanism of CPDs are also offered. Finally, a perspective of the future development of CDs is proposed with critical insights into facilitating their potential in various application fields.

Recent Progress and Advances of Multi-Stimuli-Responsive Dendrimers in Drug Delivery for Cancer Treatment

Despite the fact that nanocarriers as drug delivery systems overcome the limitation of chemotherapy, the leakage of encapsulated drugs during the delivery process to the target site can still cause toxic effects to healthy cells in other tissues and organs in the body. Controlling drug release at the target site, responding to stimuli that originated from internal changes within the body, as well as stimuli manipulated by external sources has recently received significant attention. Owning to the spherical shape and porous structure, dendrimer is utilized as a material for drug delivery. Moreover, the surface region of dendrimer has various moieties facilitating the surface functionalization to develop the desired material. Therefore, multi-stimuli-responsive dendrimers or 'smart' dendrimers that respond to more than two stimuli will be an inspired attempt to achieve the site-specific release and reduce as much as possible the side effects of the drug. The aim of this review was to delve much deeper into the recent progress of multi-stimuli-responsive dendrimers in the delivery of anticancer drugs in addition to the major potential challenges.

Stimuli-Responsive Nano-Architecture Drug-Delivery Systems to Solid Tumor Micromilieu: Past, Present, and Future Perspectives

The microenvironment characteristics of solid tumors, renowned as barriers that harshly impeded many drug-delivery approaches, were precisely studied, investigated, categorized, divided, and subdivided into a complex diverse of barriers. These categories were further studied with a particular perspective, which makes all barriers found in solid-tumor micromilieu turn into different types of stimuli, and were considered triggers that can increase and hasten drug-release targeting efficacy. This review gathers data concerning the nature of solid-tumor micromilieu. Past research focused on the treatment of such tumors, the recent efforts employed for engineering smart nanoarchitectures with the utilization of the specified stimuli categories, the possibility of combining more than one stimuli for much-greater targeting enhancement, examples of the approved nanoarchitectures that already translated clinically as well as the obstacles faced by the use of these nanostructures, and, finally, an overview of the possible future implementations of smart-chemical engineering for the design of more-efficient drug delivery and theranostic systems and for making nanosystems with a much-higher level of specificity and penetrability features.

Biodegradable dendrimers for drug delivery

Dendrimers, as a type of artificial polymers with unique structural features, have been extensively explored for their applications in biomedical fields, especially in drug delivery. However, one important concern about the most commonly used dendrimers exists - the nondegradability, which may cause side effects induced by the accumulation of synthetic polymers in cells or tissues. Therefore, biodegradable dendrimers incorporating biodegradability with merits of dendrimers such as well-defined architectures, copious internal cavities and surface functionalities, are much more promising for developing novel nontoxic drug carriers. Herein, we review the recent advances in design and synthesis of biodegradable dendrimers, as well as their applications in fabricating drug delivery systems, with the aim to provide researchers in the related fields a good understanding of biodegradable dendrimers for drug delivery.

LCST-Type Hyperbranched Poly(oligo(ethylene glycol) with Thermo- and CO2 -Responsive Backbone

A novel hyperbranched lower critical solution temperature (LCST) polymer with sharp temperature and CO₂ -responsive behaviors is presented in this study. The target polymer of hyperbranched poly(oligo(ethylene glycol) (HBPOEG) is constructed using POEG as the backbone and tertiary amines as branch points. Phase transition of HBPOEG in aqueous solution is investigated by heating and cooling the system; the results indicate that HBPOEG in aqueous solution has a concentration-dependent phase transition behavior with excellent repeatability. Moreover, LCST of HBPOEG can be tuned by bubbling CO₂ into the solution, as the tertiary amines can be protonated and the solubility of the polymer would increase by bubbling CO₂ into the system, leading to an increase of LCST of the polymer. Further bubbling N₂ to remove CO₂ can reversibly turn back the LCST to its original value. This backbone-based hyperbranched LCST polymer with both CO₂ and temperature responsiveness can be applied in application areas like drug delivery, gene transfection, functional coatings, etc.

Rational Design of Cancer Nanomedicine: Nanoproperty Integration and Synchronization

Current cancer nanomedicines can only mitigate adverse effects but fail to enhance therapeutic efficacies of anticancer drugs. Rational design of next-generation cancer nanomedicines should aim to enhance their therapeutic efficacies. Taking this into account, this review first analyzes the typical cancer-drug-delivery process of an intravenously administered nanomedicine and concludes that the delivery involves a five-step CAPIR cascade and that high efficiency at every step is critical to guarantee high overall therapeutic efficiency. Further analysis shows that the nanoproperties needed in each step for a nanomedicine to maximize its efficiency are different and even opposing in different steps, particularly what the authors call the PEG, surface-charge, size and stability dilemmas. To resolve those dilemmas in order to integrate all needed nanoproperties into one nanomedicine, stability, surface and size nanoproperty transitions (3S transitions for short) are proposed and the reported strategies to realize these transitions are comprehensively summarized. Examples of nanomedicines capable of the 3S transitions are discussed, as are future research directions to design high-performance cancer nanomedicines and their clinical translations.

Thermochromic Luminescent Materials and Multi-Emission Bands in d10 Clusters

Thermochromic luminescent compounds with d¹⁰ metal ions are interesting materials for applications such as sensors or display devices. However, these properties are difficult to predict prior to their synthesis. In this communication, we investigated materials with structural assemblies known to be responsible of distinct luminescence mechanisms and show that they can be interesting potential thermometers. Thus, we compared the synthesis of a zinc halide and a copper halide based compounds which only differ in their ability to create clusters with metallophilic interactions. The compounds synthesized by hydrothermal method have been structurally characterized by Single-crystal X-ray diffraction, Solid-State NMR, FTIR, UV-Visible spectroscopy, thermal analysis and EPR. The photoluminescence properties of the two materials have been characterized at different temperatures. The copper bromide compound shows luminescence thermochromism in a wide spectrum of colors owing to the formation of clusters generating multi-emission bands while the zinc bromide exhibits a single emission band and no thermochromism.

Diverse Applications of Nanomedicine

The design and use of materials in the nanoscale size range for addressing medical and health-related issues continues to receive increasing interest. Research in nanomedicine spans a multitude of areas, including drug delivery, vaccine development, antibacterial, diagnosis and imaging tools, wearable devices, implants, high-throughput screening platforms, etc. using biological, nonbiological, biomimetic, or hybrid materials. Many of these developments are starting to be translated into viable clinical products. Here, we provide an overview of recent developments in nanomedicine and highlight the current challenges and upcoming opportunities for the field and translation to the clinic.

Stimuli-responsive dendrimers in drug delivery

Dendrimers have shown great promise as carriers in drug delivery due to their unique structures and superior properties. However, the precise control of payload release from a dendrimer matrix still presents a great challenge. Stimuli-responsive dendrimers that release payloads in response to a specific trigger could offer distinct clinical advantages over those dendrimers that release payloads passively. These smart polymers are designed to specifically release their payloads at targeted regions or at constant release profiles for specific therapies. They represent an attractive alternative to targeted dendrimers and enable dendrimer-based therapeutics to be more effective, more convenient, and much safer. The wide range of stimuli, either endogenous (acid, enzyme, and redox potentials) or exogenous (light, ultrasound, and temperature change), allows great flexibility in the design of stimuli-responsive dendrimers. In this review article, we will highlight recent advances and opportunities in the development of stimuli-responsive dendrimers for the treatment of various diseases, with emphasis on cancer. Specifically, the applications of stimuli-responsive dendrimers in drug delivery as well as their mechanisms are intensively reviewed.

Biocomputing nanoplatforms as therapeutics and diagnostics

Biocomputing nanoplatforms are designed to detect and integrate single or multiple inputs under defined algorithms, such as Boolean logic gates, and generate functionally useful outputs, such as delivery of therapeutics or release of optically detectable signals. Using sensing modules composed of small molecules, polymers, nucleic acids, or proteins/peptides, nanoplatforms have been programmed to detect and process extrinsic stimuli, such as magnetic fields or light, or intrinsic stimuli, such as nucleic acids, enzymes, or pH. Stimulus detection can be transduced by the nanomaterial via three different mechanisms: system assembly, system disassembly, or system transformation. The increasingly sophisticated suite of biocomputing nanoplatforms may be invaluable for a multitude of applications, including medical diagnostics, biomedical imaging, environmental monitoring, and delivery of therapeutics to target cell populations.

Unusual liquid-liquid phase transition in aqueous mixtures of a well-known dendrimer

Liquid-liquid phase separation (LLPS) has been extensively investigated for polymer and protein solutions due to its importance in mixture thermodynamics, separation science and self-assembly processes. However, to date, no experimental studies have been reported on LLPS of dendrimer solutions. Here, it is shown that LLPS of aqueous solutions containing a hydroxyl-functionalized poly(amido amine) dendrimer of fourth generation is induced in the presence of sodium sulfate. Both the LLPS temperature and salt-dendrimer partitioning between the two coexisting phases at constant temperature were measured. Interestingly, our experiments show that LLPS switches from being induced by cooling to being induced by heating as the salt concentration increases. The two coexisting phases also show opposite temperature response. Thus, this phase transition exhibits a simultaneous lower and upper critical solution temperature-type behavior. Dynamic light-scattering and dye-binding experiments indicate that no appreciable conformational change occurs as the salt concentration increases. To explain the observed phase behavior, a thermodynamic model based on two parameters was developed. The first parameter, which describes dendrimer-dendrimer interaction energy, was determined by isothermal titration calorimetry. The second parameter describes the salt salting-out strength. By varying the salting-out parameter, it is shown that the model achieves agreement not only with the location of the experimental binodal at 25 °C but also with the slope of this curve around the critical point. The proposed model also predicts that the unusual temperature behavior of this phase transition can be described as the net result of two thermodynamic factors with opposite temperature responses: salt thermodynamic non-ideality and salting-out strength.

Boronate cross-linked ATP- and pH-responsive nanogels for intracellular delivery of anticancer drugs

A novel adenosine-5'-triphosphate (ATP) and pH dual-responsive degradable nanogel (NG) system are developed based on the complexation of 1,2-diols in dendritic polyglycerol (dPG), and boronic acids, which are conjugated with dPG as the macromolecular cross-linker. The NG is formed by a mild and surfactant-free inverse nanoprecipitation method. An anticancer drug, methotrexate (MTX), is coprecipitated with the macromolecular precursors and cross-linkers to form MTX-loaded NG (NG-MTX) with a loading capacity of 13 wt%. The size of NG is controllable from 100 to 300 nm, which is suitable for the enhanced permeation and retention (EPR) effect and can be degraded into small fragments that are within the clearance limitation in the presence of 5 × 10(-3) m ATP or at pH 4 after 24 h. Increasing ATP concentrations and decreasing pH values of the release medium accelerate the release of MTX. Both the real-time cell analysis (RTCA) and MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide) results show no cytotoxic effect of NG and a dose-dependent effect of NG-MTX on HeLa cells as well as MCF-7 cells. The fluorescein isothiocyanate (FITC)-labeled NG (FITC-NG) exhibits a time-dependent intracellular uptake tendency and cell organelle permeability as determined by confocal laser scanning microscopy (CLSM) or flow cytometry.

pH dependent one-/two-photon fluorescence emission properties and mechanism of the dendrimer PAMAM triphenylamine imine

pH dependent fluorescence emission of PTS-G0 and ETS were compared, to better understand intrinsic fluorescence phenomena of PAMAM dendrimers.

Integration of nanoassembly functions for an effective delivery cascade for cancer drugs

A "cluster-bomb"-like lipid-dendrimer nanoassembly synergizes the functions of its components and thereby efficiently accomplishes the drug delivery cascade for high efficacy in treating cancer. The nanoassembly successfully circulates in the blood and accumulates in the tumor. Once in the tumor, it releases small dendrimers that act like "bomblets", enabling tumor penetration, cell internalization, and drug release.

Photoluminescence from Chitosan for Bio-Imaging

Photoluminescent behaviours of chitosan were investigated. Photoluminescence can be observed from aqueous solution of chitosan, and CO2 treatment can improve the intensity of photoluminescence. The maximum emission is obtained with an excitation at ~336 nm, and the emission wavelength is dependent on the excitation wavelength with a longer excitation wavelength leading to a longer emission wavelength. The chemistry of chitosan before and after CO2 treatment was characterised; and the results reflect that carbamato anion is formed via the reaction between the amines and CO2, and is the fluorophore of the photoluminescence observed. Furthermore, chitosan was applied as an imaging agent for imaging MCF-7 cells using confocal microscopy. Blue and bright green imaging of the cells can be obtained via tuning the excitation and emission wavelength. Together with a low cytotoxicity reflected by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide evaluation, fluorescent chitosan is promising for bio-imaging.

Uncovering a broad class of fluorescent amine-containing compounds by heat treatment

In a heating process, the fluorescence peaks of amine-containing compounds shift gradually from the ultraviolet spectral region to the visible region.

AIE macromolecules: syntheses, structures and functionalities

A comprehensive review of macromolecules with aggregation-induced emission attributes is presented, covering the frontiers of syntheses, structures, functionalities and applications.

Photoluminescence from amino-containing polymer in the presence of CO2: carbamato anion formed as a fluorophore

Organic photoluminescent materials are important to many applications especially for diagnosis and detection, and most of organic photoluminescent materials contain fluorophores with extended conjugated structures. Recently some of amino-containing polymers without fluorophores with extended conjugated structure are observed to be photoluminescent, and one possible cause of the photoluminescence is oxidation of the amines. Here we show that photoluminescence can be produced by exposing a typical amino-containing polymer, polyethylenimine, to carbon dioxide. We demonstrate that carbamato anion formed via the reaction between the amine and carbon dioxide is a fluorophore; and the loosely-bound protonated water molecule can increase UV absorption but reduce the photoluminescence emission. Also carbamato anion shows solvent- and excitation wavelength-dependent emission of photoluminescence. The photoluminescence profile of carbamoto anion was discussed. These results will facilitate the understanding of photoluminescence observed from amino-containing materials and the design of new fluorophores.