Selectively Lighting Up Singlet Oxygen via Aggregation-Induced Electrochemiluminescence Energy Transfer

Singlet oxygen (¹O₂) is an important reactive oxygen species (ROS) that is intensively involved in natural photochemical and photobiological processes. Herein, selectively lighting up ¹O₂ is achieved in the aggregation-induced emission (AIE) of electrochemiluminescence (ECL) from the Zn²⁺-mediated AIE assembly of Au nanoclusters (Zn²⁺-AIE-AuNCs). Zn²⁺-AIE-AuNCs can exhibit efficient AIE ECL and photoluminescence (PL) along with ¹O₂ generation in energy and charge transfer routes, respectively. The AIE ECL of the Zn²⁺-AIE-AuNCs/tripropylamine (TEA) system in carbonate buffer is located around 703 nm with the dimeric aggregate of ¹O₂ as an emitter because electrochemically oxidizing coexisted Zn²⁺-AIE-AuNCs and TEA in carbonate buffer would promote the oxygen vacancy (O_v) of Zn²⁺-AIE-AuNCs, which could selectively enable the generation of emissive singlet oxygen in the energy transfer route by effectively transferring the energy from excited singlet Zn²⁺-AIE-AuNCs to the triplet ground state of dissolved oxygen (³O₂). No emissive ¹O₂ is detected via electrochemically oxidizing the Zn²⁺-AIE-AuNCs in the case without either carbonate buffer or TEA, and the Zn²⁺-AIE-AuNCs/TEA system can only exhibit AIE ECL around 485 nm with Zn²⁺-AIE-AuNCs as the emitter in carbonate-free buffers. Photoexciting Zn²⁺-AIE-AuNCs merely brings out band-gap-engineered AIE PL around ∼485 nm with Zn²⁺-AIE-AuNCs as the emitter, which manifests that the ¹O₂ generated in the charge transfer route via photoexciting Zn²⁺-AIE-AuNCs is un-emissive. This work not only proposes an effective strategy for AIE with ¹O₂ as an emitter but also opens a promising way to selectively light up ¹O₂.

Perovskite Oxides Prepared by Hydrothermal and Solvothermal Synthesis: A Review of Crystallisation, Chemistry, and Compositions

Perovskite oxides with general composition ABO₃ are a large group of inorganic materials that can contain a variety of cations from all parts of the Periodic Table and that have diverse properties of application in fields ranging from electronics, energy storage to photocatalysis. Solvothermal synthesis routes to these materials have become increasingly investigated in the past decade as a means of direct crystallisation of the solids from solution. These methods have significant advantages leading to adjustment of crystal form from the nanoscale to the micron-scale, the isolation of compositions not possible using conventional solid-state synthesis and in addition may lead to scalable processes for producing materials at moderate temperatures. These aspects are reviewed, with examples taken from the past decade's literature on the solvothermal synthesis of perovskites with a systematic survey of B-site cations, from transition metals in Groups 4-8 and main group elements in Groups 13, 14 and 15, to solid solutions and heterostructures. As well as hydrothermal reactions, the use of various solvents and solution additives are discussed and some trends identified, along with prospects for developing control and predictability in the crystallisation of complex oxide materials.

Nanostructured Perovskite Solar Cells

Over the past decade, lead halide perovskites have emerged as one of the leading photovoltaic materials due to their long carrier lifetimes, high absorption coefficients, high tolerance to defects, and facile processing methods. With a bandgap of ~1.6 eV, lead halide perovskite solar cells have achieved power conversion efficiencies in excess of 25%. Despite this, poor material stability along with lead contamination remains a significant barrier to commercialization. Recently, low-dimensional perovskites, where at least one of the structural dimensions is measured on the nanoscale, have demonstrated significantly higher stabilities, and although their power conversion efficiencies are slightly lower, these materials also open up the possibility of quantum-confinement effects such as carrier multiplication. Furthermore, both bulk perovskites and low-dimensional perovskites have been demonstrated to form hybrids with silicon nanocrystals, where numerous device architectures can be exploited to improve efficiency. In this review, we provide an overview of perovskite solar cells, and report the current progress in nanoscale perovskites, such as low-dimensional perovskites, perovskite quantum dots, and perovskite-nanocrystal hybrid solar cells.

LaTiO2N-LaCrO3: continuous solid solutions towards enhanced photocatalytic H2 evolution under visible-light irradiation

(LaTiO₂N)_1-x(LaCrO₃)_x continuous solid solutions with an orthorhombic-phase ABX₃ perovskite structure and with varied LaCrO₃ contents (0 ≤ x ≤ 1) were synthesized by a polymerized complex method followed by a post-treatment process of nitridation for the first time. Visible-light-driven photocatalytic H₂-evolution activities of the solid solutions gradually increased with the increase of x from 0.0 to 0.3, and then sharply decreased with the further increase of x from 0.3 to 1.0. With the increase of x, on the one hand, the narrowed bandgaps of solid solutions would enhance the generation of charge carriers and the increased lattice distortion of solid solutions could promote the separation and migration of charge carriers, thus mainly contributing to the improvement of photocatalytic activities; on the other hand, the lowered CBMs of solid solutions would reduce the driving force for reducing H₂O to H₂ and the decreased surface areas of solid solutions would weaken the adsorption of reactants and reduce the reactive sites, thereby resulting in the deterioration of photocatalytic activities.

Molten Ag2 SO4 -based Ion-Exchange Preparation of Ag0.5 La0.5 TiO3 for Photocatalytic O2 Evolution

Ag_0.5 La_0.5 TiO₃ with an ABO₃ perovskite structure was synthesized by a newly developed ion-exchange method. Molten Ag₂ SO₄ instead of traditional molten AgNO₃ was used as Ag⁺ source in view of its high decomposition temperature (1052 °C), thereby guaranteeing the complete substitution of Ag⁺ for Na⁺ in Na_0.5 La_0.5 TiO₃ with a stable ABO₃ perovskite structure at a high ion-exchange temperature (700 °C). Under full-arc irradiation, the O₂ -evolution activity of Ag_0.5 La_0.5 TiO₃ was about 1.6 times that of Na_0.5 La_0.5 TiO₃ due to the optimized electronic band structures and local lattice structures. On the one hand, the substitution of Ag⁺ for Na⁺ elevated the VBM and thus narrowed the band gap from 3.19 to 2.83 eV, thereby extending the light-response range and, accordingly, enhancing the photoexcitation to generate more charge carriers. On the other hand, the substitution of Ag⁺ for Na⁺ induced a lattice distortion of the ABO₃ perovskite structure, thereby promoting the separation and migration of charge carriers. Moreover, under visible-light irradiation, Ag_0.5 La_0.5 TiO₃ displayed notable O₂ evolution whereas Na_0.5 La_0.5 TiO₃ showed little O₂ evolution, thus demonstrating that the substitution of Ag⁺ for Na⁺ enabled the use of visible light to evolve O₂ photocatalytically. This work presents an effective route to explore novel Ag-based photocatalysts.

Co3(OH)2(HPO4)2 as a novel photocatalyst for O2 evolution under visible-light irradiation

Co₃(OH)₂(HPO₄)₂ was proved to be a novel visible-light-driven photocatalyst for O₂ evolution due to the unique characteristics of Co²⁺ octahedra.

Inorganic perovskite photocatalysts for solar energy utilization

This review specifically summarizes the recent development of perovskite photocatalysts and their applications in water splitting and environmental remediation.

Continuous solid solutions of Na0.5La0.5TiO3–LaCrO3 for photocatalytic H2 evolution under visible-light irradiation

(Na_0.5La_0.5TiO₃)_1−x(LaCrO₃)_x solid solutions showed enhanced visible-light-driven photocatalytic activities for H₂ evolution due to the narrowed bandgaps and increased lattice distortion.

A review on visible light active perovskite-based photocatalysts

Perovskite-based photocatalysts are of significant interest in the field of photocatalysis. To date, several perovskite material systems have been developed and their applications in visible light photocatalysis studied. This article provides a review of the visible light (λ > 400 nm) active perovskite-based photocatalyst systems. The materials systems are classified by the B site cations and their crystal structure, optical properties, electronic structure, and photocatalytic performance are reviewed in detail. Titanates, tantalates, niobates, vanadates, and ferrites form important photocatalysts which show promise in visible light-driven photoreactions. Along with simple perovskite (ABO₃) structures, development of double/complex perovskites that are active under visible light is also reviewed. Various strategies employed for enhancing the photocatalytic performance have been discussed, emphasizing the specific advantages and challenges offered by perovskite-based photocatalysts. This review provides a broad overview of the perovskite photocatalysts, summarizing the current state of the work and offering useful insights for their future development.

Functionalized nanostructures for enhanced photocatalytic performance under solar light

Photocatalytic hydrogen production from water has been considered to be one of the most promising solar-to-hydrogen conversion technologies. In the last decade, various functionalized nanostructures were designed to address the primary requirements for an efficient photocatalytic generation of hydrogen by using solar energy: visible-light activity, chemical stability, appropriate band-edge characteristics, and potential for low-cost fabrication. Our aim is to present a short review of our recent attempts that center on the above requirements. We begin with a brief introduction of photocatalysts coupling two or more semiconductors, followed by a further discussion of the heterostructures with improved matching of both band structures and crystal lattices. We then elaborate on the heterostructure design of the targeted materials from macroscopic regulation of compositions and phases, to the more precise control at the nanoscale, i.e., materials with the same compositions but different phases with certain band alignment. We conclude this review with perspectives on nanostructure design that might direct future research of this technology.

Visible light-driven photocatalysis of doped SrTiO3 tubular structure

SrTiO3 tubular structures co-doped with Cr and Ta were synthesized through a combination of solvothermal-hydrothermal processes. X-ray photoelectron spectroscopy (XPS) measurements of the oxidation state of Cr ions reveal that the formation of Cr6+ ions, which would serve as the non-radiative recombination centers for photogenerated electrons and holes, was suppressed without the process of high temperature hydrogen reduction. Compared to similar co-doped materials synthesized by solid-state reaction, (Cr, Ta) co-doped SrTiO3 tubular structures have significantly higher photocatalytic activity for hydrogen evolution as measured in an aqueous methanol solution under visible light irradiation.