The Role of Oxidative Etching in the Synthesis of Ultrathin Single-Crystalline Au Nanowires

Multisensor Systems by Electrochemical Nanowire Assembly for the Analysis of Aqueous Solutions

The development of electrochemical multisensor systems is driven by the need for fast, miniature, inexpensive, analytical devices, and advanced interdisciplinary based on both chemometric and (nano)material approaches. A multicomponent analysis of complex mixtures in environmental and technological monitoring, biological samples, and cell culture requires chip-based multisensor systems with high-stability sensors. In this paper, we describe the development, characterization, and applications of chip-based nanoelectrochemical sensor arrays prepared by the directed electrochemical nanowire assembly (DENA) of noble metals and metal alloys to analyze aqueous solutions. A synergic action of the electrode transducer function and electrocatalytic activity of the nanostructured surface toward analytes is achieved in the assembled metal nanowire (NW) sensors. Various sensor nanomaterials (Pd, Ni, Au, and their multicomponent compositions) can be electrochemically assembled on a single chip without employing multiple cycles of photolithography process to realize multi-analyte sensing applications as well as spatial resolution of sensor analysis by this single-chip multisensor system. For multi-analyte electrochemical sensing, individual amperometric signals of two or more nanowires can be acquired, making use of the specific electrocatalytic surface properties of the individual nanowire sensors of the array toward analytes. To demonstrate the application of a new electrochemical multisensor platform, Pd-Au, Pd-Ni, Pd, and Au NW electrode arrays on a single chip were employed for the non-enzymatic analysis of hydrogen peroxide, glucose, and ethanol. The analytes are determined at low absolute values of the detection potentials with linear concentration ranges of 1.0 × 10⁻⁶ − 1.0 × 10⁻³ M (H₂O₂), 1.5 × 10⁻⁷ − 2.0 × 10⁻³ M (glucose), and 0.7 × 10⁻³ − 3.0 × 10⁻² M (ethanol), detection limits of 2 × 10⁻⁷ M (H₂O₂), 4 × 10⁻⁸ M (glucose), and 5.2 × 10⁻⁴ M (ethanol), and sensitivities of 18 μA M⁻¹ (H₂O₂), 178 μA M⁻¹ (glucose), and 28 μA M⁻¹ (ethanol), respectively. The sensors demonstrate a high level of stability due to the non-enzymatic detection mode. Based on the DENA-assembled nanowire electrodes of a compositional diversity, we propose a novel single-chip electrochemical multisensor platform, which is promising for acquiring complex analytical signals for advanced data processing with chemometric techniques aimed at the development of electronic tongue-type multisensor systems for flexible multi-analyte monitoring and healthcare applications.

Stepwise evolution of Au micro/nanocrystals from an octahedron into a truncated ditetragonal prism

Stepwise evolution of Au crystals from a micro-level octahedron to a nano-level truncated ditetragonal prism was achieved by a one pot synthesis method.

Gold Aerogels: Three-Dimensional Assembly of Nanoparticles and Their Use as Electrocatalytic Interfaces

Three-dimensional (3D) porous metal nanostructures have been a long sought-after class of materials due to their collective properties and widespread applications. In this study, we report on a facile and versatile strategy for the formation of Au hydrogel networks involving the dopamine-induced 3D assembly of Au nanoparticles. Following supercritical drying, the resulting Au aerogels exhibit high surface areas and porosity. They are all composed of porous nanowire networks reflecting in their diameters those of the original particles (5-6 nm) via electron microscopy. Furthermore, electrocatalytic tests were carried out in the oxidation of some small molecules with Au aerogels tailored by different functional groups. The beta-cyclodextrin-modified Au aerogel, with a host-guest effect, represents a unique class of porous metal materials of considerable interest and promising applications for electrocatalysis.

The alloying effect and AgCl-directing growth for synthesizing a trimetallic nanoring with improved SERS

We report the synthesis of high quality trimetallic Au/Ag/Pt nanorings (TAAPNs) by using Au/Ag alloy decahedra (AAAD) as templates. The alloying effect and AgCl-directing growth have been investigated in detail during the formation of TAAPN. It was found that the doping of Ag in AAAD changes the surrounding environment of Au atoms and decreases the oxidization reduction potential (ORP) of [AuCl(2)](-)/Au because of the alloying effect, resulting in the dissolved O(2) molecules that serve as an effective etchant for oxidizing Au to Au(I). Ascorbic acid (AA) and chloroplatinic acid (H(2)PtCl(6)) are weak acids which can accelerate the etching by increasing the concentration of H(+). The AgCl selectively absorbs on {100} of the decahedra and induces the preferential deposition of H(2)PtCl(6) here via their complexing interaction. AA reduces Pt(IV) and Ag(I) to atoms which grow on {100} facets. The formed Pt/Ag layer changes the etching direction from along [100] to [111] and generates the TAAPN. Besides, it has been noted that the TAAPNs exhibit good Surface Enhanced Raman Scattering (SERS) performance.

Probing the effect of surface chemistry on the electrical properties of ultrathin gold nanowire sensors

Ultrathin metal nanowires are ultimately analytical tools that can be used to survey the interfacial properties of the functional groups of organic molecules immobilized on nanoelectrodes. The high ratio of surface to bulk atoms makes such ultrathin nanowires extremely electrically sensitive to adsorbates and their charge and/or polarity, although little is known about the nature of surface chemistry interactions on metallic ultrathin nanowires. Here we report the first studies about the effect of functional groups of short-chain alkanethiol molecules on the electrical resistance of ultrathin gold nanowires. We fabricated ultrathin nanowire electrical sensors based on chemiresistors using conventional microfabrication techniques, so that the contact areas were passivated to leave only the surface of the nanowires exposed to the environment. By immobilizing alkanethiol molecules with head groups such as -CH3, -NH2 and -COOH on gold nanowires, we examined how the charge proximity due to protonation/deprotonation of the functional groups affects the resistance of the sensors. Electrical measurements in air and in water only indicate that beyond the gold-sulfur moiety interactions, the interfacial charge due to the acid-base chemistry of the functional groups of the molecules has a significant impact on the electrical resistance of the wires. Our data demonstrate that the degree of dissociation of the corresponding functional groups plays a major role in enhancing the surface-sensitive resistivity of the nanowires. These results stress the importance of recognizing the effect of protonation/deprotonation of the surface chemistry on the resulting electrical sensitivity of ultrathin metal nanowires and the applicability of such sensors for studying interfacial properties using electrodes of comparable size to the electrochemical double layer.

Features of transport in ultrathin gold nanowire structures

The origin of the interface formation appearing due to the realization of contacts to ultrathin gold nanowire devices is revealed. Such interfaces play an important role in transport mechanisms in nanowire structures and can determine the electrical and operating parameters of a nanodevice. Based on experimental results, the specific electrical properties of bundles of ultrathin gold nanowires fabricated by wet chemical synthesis and subsequently assembled and contacted with gold electrodes are reported. It is demonstrated that these properties are strongly affected by the monolayers of organic molecules inevitably present on the surface of the nanowires due to synthetic conditions. In particular, such layers form a potential barrier to tunneling of the electrons from contacts to the nanowires. The electric transport behavior of the investigated nanowire structures in the temperature range from 500 mK to 300 K obeys the model of thermal fluctuation-induced tunneling conduction through the nanowire-metal electrode molecular junction. Application of this model allows calculation of the parameters of the molecular potential barrier. The formation of such a molecular barrier is verified by scanning tunneling microscope (STM) and transmission electron microscope (TEM) measurements performed using a supporting graphene layer. These findings are important for designing novel nanodevices for molecular electronics on the basis of ultrathin nanowires.