Transition Metal Complexes with Appended Benzimidazole Groups for Sensing Dihydrogenphosphate

Four new complexes [Ru(bpy)2(bbib)](PF6)2, [Ru(phen)2(bbib)](PF6)2, [Re(CO)3(bbib)(py)](PF6) and [Ir(ppy)2(bbib)](PF6) [where bbib=4,4'-bis(benzimidazol-2-yl)-2,2'-bipyridine] have been prepared and their photophysical properties determined. Their behaviour has been studied with a variety of anions in acetonitrile, DMSO and 10 % aquated DMSO. Acetate and dihydrogenphosphate demonstrate a redshift in the bbib ligand associated absorptions suggesting that the ligand is strongly interacting with these anions. The 3MLCT emissive state is sensitive to the introduction of small quantities of anion (sub-stoichiometric quantities) and significant quenching is typically observed with acetate, although this is less pronounced in the presence of water. The emissive behaviour with dihydrogenphosphate is variable, showing systematic changes as anion concentration increases with several distinct interactions evident. 1H- and 31P-NMR titrations in a 10 % D2O-DMSO-D6 mixture suggest that with dihydrogenphosphate, the imidazole group is able to act as both a proton acceptor and donor. It appears that all four complexes can form a {[complex]2-H2PO4} "dimer", a one-to-one species (which the X-ray crystallography study suggests is dimeric in the solid-state), and a complex with a combined bis(dihydrogenphosphate) complex anion. The speciation relies on complex equilibria dependent on several factors including the complex charge, the hydrophobicity of the associated ligands, and the solvent.

Combined Machine Learning, Computational, and Experimental Analysis of the Iridium(III) Complexes with Red to Near-Infrared Emission

Various coordination complexes have been the subject of experimental and theoretical studies in recent decades because of their fascinating photophysical properties. In this work, a combined experimental and computational approach was applied to investigate the optical properties of monocationic Ir(III) complexes. An interpretative machine learning-based quantitative structure-property relationship (ML/QSPR) model was successfully developed that could reliably predict the emission wavelength of the Ir(III) complexes and provide a foundation for the theoretical evaluation of the optical properties of Ir(III) complexes. A hypothesis was proposed to explain the differences in the emission wavelengths between structurally different individual Ir(III) complexes. The efficacy of the developed model was demonstrated by high R2 values of 0.84 and 0.87 for the training and test sets, respectively. It is worth noting that a relationship between the N-N distance in the diimine ligands of the Ir(III) complexes and emission wavelengths is detected. This effect is most probably associated with a degree of distortion in the octahedral geometry of the complexes, resulting in a perturbed ligand field. This combined experimental and computational approach shows great potential for the rational design of new Ir(III) complexes with the desired optical properties. Moreover, the developed methodology could be extended to other transition-metal complexes.

Selective population of triplet excited states in heavy-atom-free BODIPY-C60 based molecular assemblies

Photophysical studies on a BODIPY-fullerene-distyryl BODIPY triad (BDP-C₆₀-DSBDP) and its reference dyads (BODIPY-fullerene; BDP-C₆₀ and distyryl BODIPY-fullerene; DSBDP-C₆₀) are presented herein. In the triad, the association of the two chromophore units linked by a fullerene moiety leads to strong near UV-Visible light absorption from 300 to 700 nm. The triplet-excited state was observed upon visible excitation in all these assemblies, and shown to be localized on the C₆₀ or BODIPY moieties. Using quantitative nanosecond transient absorption, we provide a complete investigation on the lifetime and formation quantum yield of the triplet-excited state. In the BDP-C₆₀ dyad, the triplet excited state of C₆₀ (τ = 7 ± 1 μs) was obtained with a quantum yield of 40 ± 8%. For the DSBDP-C₆₀ dyad and BDP-C₆₀-DSBDP triad, a longer-lived triplet excited state with a lifetime of around 250 ± 20 μs centered on the DSBDP moiety was formed, with respective quantum yields of 37 ± 8 and 20 ± 4%. Triplet-triplet annihilation up-conversion is characterized in the BDP-C₆₀ dyad and the bichromophoric triad in the presence of perylene and DSBDP-monomer as respective annihilators. The photo-induced formation of a long-lived ³DSBDP* in the triad coupled with panchromatic light absorption offers potential applications as a heavy-atom-free organic triplet photosensitizer.

Reticular-Chemistry-Inspired Supramolecule Design as a Tool to Achieve Efficient Photocatalysts for CO2 Reduction

Photocatalytic CO₂ reduction into C1 products is one of the most trending research subjects of current times as sustainable energy generation is the utmost need of the hour. In this review, we have tried to comprehensively summarize the potential of supramolecule-based photocatalysts for CO₂ reduction into C1 compounds. At the outset, we have thrown light on the inert nature of gaseous CO₂ and the various challenges researchers are facing in its reduction. The evolution of photocatalysts used for CO₂ reduction, from heterogeneous catalysis to supramolecule-based molecular catalysis, and subsequent semiconductor-supramolecule hybrid catalysis has been thoroughly discussed. Since CO₂ is thermodynamically a very stable molecule, a huge reduction potential is required to undergo its one- or multielectron reduction. For this reason, various supramolecule photocatalysts were designed involving a photosensitizer unit and a catalyst unit connected by a linker. Later on, solid semiconductor support was also introduced in this supramolecule system to achieve enhanced durability, structural compactness, enhanced charge mobility, and extra overpotential for CO₂ reduction. Reticular chemistry is seen to play a pivotal role as it allows bringing all of the positive features together from various components of this hybrid semiconductor-supramolecule photocatalyst system. Thus, here in this review, we have discussed the selection and role of various components, viz. the photosensitizer component, the catalyst component, the linker, the semiconductor support, the anchoring ligands, and the peripheral ligands for the design of highly performing CO₂ reduction photocatalysts. The selection and role of various sacrificial electron donors have also been highlighted. This review is aimed to help researchers reach an understanding that may translate into the development of excellent CO₂ reduction photocatalysts that are operational under visible light and possess superior activity, efficiency, and selectivity.

Two Excited State Collaboration of Heteroleptic Ir(III)-Coumarin Complexes for H2 Evolution Dye-Sensitized Photocatalysts

Interfacial electron injection from a photoexcited surface-immobilized dye to a semiconductor substrate is a key reaction for dye-sensitized photocatalysts. We previously reported that the molecular orientation of heteroleptic Ir(III) photosensitizer on the TiO2 nanoparticle surface was important for efficient interfacial electron injection. In this work, to overcome the weak light absorption ability of heteroleptic Ir(III) photosensitizer and to improve the photoinduced charge-separation efficiency at the dye–semiconductor interface, we synthesized two heteroleptic Ir(III) complexes with different coumarin dyes, [Ir(C6)2(H4CPbpy)]Cl and [Ir(C30)2(H4CPbpy)]Cl [Ir-CX; X = 6 or 30; HC6 = 3-(2-enzothiazolyl)-7-(diethylamino)coumarin, HC30 = 3-(2-N-methylbenzimidazolyl)-7-N,N-diethylaminocoumarin, H4CPbpy = 4,4′-bis(methylphosphonic acid)-2,2′-bipyridine], as the cyclometalated ligands and immobilized them on the surface of Pt-cocatalyst-loaded TiO2 nanoparticles. Ultraviolet-visible absorption and emission spectroscopy revealed that the singlet ligand-centered (1LC) absorption and triplet 3LC emission bands of Ir-C30 occurred at shorter wavelengths than those of Ir-C6, while time-dependent density-functional-theory data suggested that the ligand-to-ligand charge transfer (LLCT) excited states of the two complexes were comparable. The photocatalytic H2 evolution activity of the Ir-C6-sensitized Pt-TiO2 nanoparticles (Ir-C6@Pt-TiO2) under visible light irradiation (λ > 420 nm) was higher than that of Ir-C30@Pt-TiO2. In contrast, their activities were comparable under irradiation with monochromatic light (λ = 450 ± 10 nm), which is absorbed comparably by both Ir-CX complexes. These results suggest that the internal conversion from the higher-lying LC state to the LLCT state effectively occurs in both Ir-CX complexes to trigger electron injection to TiO2.

Site-Selective Real-Time Observation of Bimolecular Electron Transfer in a Photocatalytic System Using L-Edge X-Ray Absorption Spectroscopy*

Time-resolved X-ray absorption spectroscopy has been utilized to monitor the bimolecular electron transfer in a photocatalytic water splitting system. This has been possible by uniting the local probe and element specific character of X-ray transitions with insights from high-level ab initio calculations. The specific target has been a heteroleptic [IrIII (ppy)2 (bpy)]+ photosensitizer, in combination with triethylamine as a sacrificial reductant and Fe 3 ( CO ) 12 as a water reduction catalyst. The relevant molecular transitions have been characterized via high-resolution Ir L-edge X-ray absorption spectroscopy on the picosecond time scale and restricted active space self-consistent field calculations. The presented methods and results will enhance our understanding of functionally relevant bimolecular electron transfer reactions and thus will pave the road to rational optimization of photocatalytic performance.

Cross-Coupled Phenyl- and Alkynyl-Based Phenanthrolines and Their Effect on the Photophysical and Electrochemical Properties of Heteroleptic Cu(I) Photosensitizers

With the aims of increasing the antenna system and improving the photophysical properties of Cu(I)-based photosensitizers, the backbone of 2,9-dimethyl-1,10-phenanthroline was selectively extended in the 5,6-position. Applying specifically tailored Suzuki-Miyaura and "chemistry-on-the-complex" Sonogashira cross-coupling reactions enabled the development of two sets of structurally related diimine ligands with a broad variety of different phenyl- and alkynyl-based substituents. The resulting 11 novel heteroleptic Cu(I) complexes, including five solid-state structures, were studied with respect to their structure-property relationships. Both sets of substituents are able to red-shift the absorption maxima and to increase the absorptivity. For the alkynyl-based complexes, this is accompanied by a significant anodic shift of the reduction potentials. The phenyl-based substituents strongly influence the emission wavelength and quantum yield of the resulting Cu(I) complexes and lead to an increase in the emission lifetime of up to 504 ns, which clearly indicates competition with the benchmark system [(xantphos)Cu(bathocuproine)]PF₆.

Spin-Orbit Charge-Transfer Intersystem Crossing in Anthracene-Perylenebisimide Compact Electron Donor-Acceptor Dyads and Triads and Photochemical Dianion Formation

Perylenebisimide (PBI)-anthracene (AN) donor-acceptor dyads/triad were prepared to investigate spin-orbit charge-transfer intersystem crossing (SOCT-ISC). Molecular conformation was controlled by connecting PBI units to the 2- or 9-position of the AN moiety. Steady-state, time-resolved transient absorption and emission spectroscopy revealed that chromophore orientation, electronic coupling, and dihedral angle between donor and acceptor exert a significant effect on the photophysical property. The dyad PBI-9-AN with orthogonal geometry shows weak ground-state coupling and efficient intersystem crossing (ISC, Φ_Δ =86 %) as compared with PBI-2-AN (Φ_Δ =57 %), which has a more coplanar geometry. By nanosecond transient absorption spectroscopy, a long-lived PBI localized triplet state was observed (τ_T =139 μs). Time-resolved EPR spectroscopy demonstrated that the electron spin polarization pattern of the triplet state is sensitive to the geometry and number of AN units attached to PBI. Reversible and stepwise generation of near-IR-absorbing PBI radical anion (PBI^-⋅ ) and dianion (PBI^2- ) was observed on photoexcitation in the presence of triethanolamine, and it was confirmed that selective photoexcitation at the near-IR absorption bands of PBI^.- is unable to produce PBI^2- .

Bodipy Derivatives as Triplet Photosensitizers and the Related Intersystem Crossing Mechanisms

Recently varieties of Bodipy derivatives showing intersystem crossing (ISC) have been reported as triplet photosensitizers, and the application of these compounds in photocatalysis, photodynamic therapy (PDT), and photon upconversion are promising. In this review we summarized the recent development in the area of Bodipy-derived triplet photosensitizers and discussed the molecular structural factors that enhance the ISC ability. The compounds are introduced based on their ISC mechanisms, which include the heavy atom effect, exciton coupling, charge recombination (CR)-induced ISC, using a spin converter and radical enhanced ISC. Some transition metal complexes containing Bodipy chromophores are also discussed. The applications of these new triplet photosensitizers in photodynamic therapy, photocatalysis, and photon upconversion are briefly commented on. We believe the study of new triplet photosensitizers and the application of these novel materials in the abovementioned areas will be blooming.

Cyclometalated rhodium and iridium complexes with imidazole containing Schiff bases: Synthesis, structure and cellular imaging

Cyclometalated rhodium(III) and iridium(III) complexes (1-4) of two Schiff base ligands L1 and L2 with the general formula [M(ppy)2(Ln)]Cl {M = Rh, Ir; ppy = 2-phenylpyridine; n = 1, 2; L = Schiff base ligand} have been synthesized. The new ligands and the complexes have been characterized with spectroscopic techniques. Electrochemistry of the complexes revealed anodic behavior, corresponding to an M(III) to M(IV) oxidation. The X-ray crystal structures of complexes 2 and 4 have also been determined to interpret the coordination behavior of the complexes. Photophysical study shows that all the complexes display fluorescence at room temperature with quantum yield of about 3 × 10-2 to 5 × 10-2. The electronic absorption spectra of all the complexes fit well with the computational studies. Cellular imaging studies were done with the newly synthesized complexes. To the best of our knowledge, this is the first report of organometallic complexes of rhodium(III) and iridium(III) with Schiff base ligands explored for cellular imaging. Emphasis of this work lies on the structural features, photophysical behavior, cellular uptake and imaging of the fluorescent transition metal complexes.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Effect of Molecular Conformation Restriction on the Photophysical Properties of N^N Platinum(II) Bis(ethynylnaphthalimide) Complexes Showing Close-Lying 3MLCT and 3LE Excited States

Using naphthalimide (NI), complexes (Pt-PhNI and Pt-PhMeNI) based on the N^N platinum(II) bis(phenylacetylide) coordination framework were prepared, in which there are two close-lying triplet states, i.e., the metal-to-ligand-charge-transfer (³MLCT) and the NI localized emissive state (³LE). Pt-PhNI has better electronic communication between the Pt coordination center and the NI moiety, whereas in Pt-PhMeNI, they are more isolated by orthogonal geometry. For Pt-PhMeNI, the S₀ → ¹MLCT and S₀ → ¹LE absorption bands are separated by 5655 cm^-1, while they are more overlapped in Pt-PhNI. The ³MLCT → S₀ and ³LE → S₀ dual phosphorescence emissions were observed for both Pt-PhNI (in toluene) and Pt-PhMeNI (in benzonitrile). The molecular conformation tunes the ³MLCT/³LE state population ratio, and the orthogonal geometry makes the ³LE state in Pt-PhMeNI basically a dark state (in toluene). Switching of the relative energy levels of the ³MLCT/³LE states by variation of the solvent polarity and temperature was achieved. For Pt-PhMeNI, the energy level of ³MLCT state is higher in a polar solvent; thus, the ³MLCT emission decreases, while the phosphorescence lifetime is prolonged from 9.5 μs (in toluene) to 58 μs (in benzonitrile) because of the different equilibria with the nonemissive ³LE state. Conversely, increasing the temperature enhances the upward transition from the nonemissive ³LE state to the emissive ³MLCT state; as such, the phosphorescence of Pt-PhMeNI was intensified at higher temperature (which is unusual), and the phosphorescence lifetime decreased from 58 μs (298 K) to ca. 5 μs (348 K). The ultrafast intersystem crossing (ca. 0.5 ps) and intramolecular triplet-triplet energy transfer (3-11 ps) were studied by femtosecond transient absorption spectroscopy. These results are useful for an in-depth understanding of the photophysics of multichromophore transition-metal complexes and for the design of external stimuli-responsive sensing materials, for instance, temperature or microenvironment sensing materials.

Metal-complex chromophores for solar hydrogen generation

Solar H₂ generation from water has been intensively investigated as a clean method to convert solar energy into hydrogen fuel. During the past few decades, many studies have demonstrated that metal complexes can act as efficient photoactive materials for photocatalytic H₂ production. Here, we review the recent progress in the application of metal-complex chromophores to solar-to-H₂ conversion, including metal-complex photosensitizers and supramolecular photocatalysts. A brief overview of the fundamental principles of photocatalytic H₂ production is given. Then, different metal-complex photosensitizers and supramolecular photocatalysts are introduced in detail, and the most important factors that strictly determine their photocatalytic performance are also discussed. Finally, we illustrate some challenges and opportunities for future research in this promising area.

Recent progress in heavy atom-free organic compounds showing unexpected intersystem crossing (ISC) ability

The intersystem crossing (ISC) of the heavy atom-free triplet photosensitizers was summarised, including the spin–orbit charge transfer ISC mechanism.

A rare example of a compact heteroleptic cyclometalated iridium(iii) complex demonstrating well-separated dual emission

Cationic heteroleptic Ir(iii) complexes [Ir(C^N)₂(NN)][PF₆] exhibit unique singlet–triplet dual emission in solution with two well separated emission bands.

Stabilisation effects of phosphane ligands in the homogeneous approach of sunlight induced hydrogen production

Most of the systems for photochemical hydrogen production are not stable and suffer from decomposition. With bis(bidentate) tetraphosphane ligands the stability increases enormously, up to more than 1000 h. This stability was achieved with a system containing osmium(ii) as a light harvesting antenna and palladium(ii) as a water reduction catalyst connected with a bis(bidentate) phosphane ligand in one molecule with the chemical formula [Os(bpy)₂(dppcb)Pd(dppm)](PF₆)₄. With the help of electrochemical measurements as well as photophysical data and its single crystal X-ray structure, the electron transfer between the two active metal centres (light harvesting antenna, water reduction catalyst) was analysed. The distance between the two active metal centres was determined to be 7.396(1) Å. In a noble metal free combination of a copper based photosensitiser and a cobalt diimine-dioxime complex as water reduction catalyst a further stabilisation effect by the phosphane ligands is observed. With the help of triethylamine as a sacrificial donor in the presence of different monophosphane ligands it was possible to produce hydrogen with a turnover number of 1176. This completely novel combination is also able to produce hydrogen in a wide pH-range from pH = 7.0 to 12.5 with the maximum production at pH = 11.0. The influence of monophosphane ligands with different Tolman cone angles was investigated. Monophosphane ligands with a large Tolman cone angle (>160°) could not stabilise the intermediate of the cobalt based water reduction catalyst and so the turnover number is lower than for systems with an addition of monophosphane ligands with a Tolman cone angle smaller than 160°. The role of the monophosphane ligand during sunlight-induced hydrogen production was analysed and these results were confirmed with DFT calculations. Furthermore the crystal structures of two important Co(i) intermediates, which are the catalytic active species during the catalytic pathway, were obtained. The exchange of PPh₃ with other tertiary phosphane ligands can have a major impact on the activity, depending on the coordination properties. By an exchange of monophosphane ligands with functionalised phosphane ligands (hybrid ligands) the hydrogen production was raised 2.17 times.

Tuning the Ground State and Excited State Properties of Monocationic Iridium(III) Complexes by Varying the Site of Benzannulation on Diimine Ligand

Extending π-conjugation of the diimine ligand (N^N ligand) via benzannulation is a common way to tune the absorption and emission energies of cationic iridium(III) complexes. However, it can cause either a red- or blue-shift of the absorption and emission bands depending on the site of benzannulation. To understand the mechanism of changes in optical transitions upon benzannulation on the diimine ligand, a series of new cationic iridium(III) complexes [Ir(dppi)₂(N^N)]PF₆ (1-6) (where dppi =1,2-diphenylpyreno[4,5-d]imidazole; N^N = 2-(pyridin-2-yl)quinoline (1), 2-(pyridin-2-yl)[7,8]benzoquinoline (2), 2,2'-bisquinoline (3), 2-(quinolin-2-yl)[7,8]benzoquinoline (4), 2-(pyridin-2-yl)[6,7]benzoquinoline (5), 2-(quinolin-2-yl)[6,7]benzoquinoline (6)) containing diimine ligand with varied degrees of π-conjugation via benzannulation at different sites of the 2-(pyridin-2-yl)quinoline ligand were synthesized. Experimental results and density functional theory (DFT) calculations revealed that benzannulation at the 6,7-position of quinoline and/or the 5',6'-position of pyridine (3, 5, and 6) induced red-shifts in their absorption and emission bands with respect to the parent complex 1; while benzannulation at the 7,8-position of quinoline resulted in blue-shifts (2 vs 1 and 4 vs 3). This phenomenon was rationalized by the symmetry of the frontier molecular orbitals at the site of benzannulation, which stabilized or destabilized the lowest unoccupied molecular orbital (LUMO) upon interactions with 1,3-butadiene, while the energy of the highest occupied molecular orbital (HOMO) remained nearly the same. This discovery would enable a rational design of organic or organometallic compounds that have predetermined absorption and emission energies.

Ultrafast excited state dynamics of iridium(III) complexes and their changes upon immobilisation onto titanium dioxide layers

Time-resolved spectroscopy was applied to investigate the excited state dynamics of two heteroleptic Ir(III) complexes with the general formula [Ir(C^N)2(N^N)](+), where C^N and N^N represent different cyclometalating and diimine ligands, respectively. The excited state relaxation is influenced by the ligand substitution as well as the light polarisation. Vibrational relaxation occurs in the sub-ps timescale and interligand charge transfer results in polarisation dependent signal dynamics with a time constant of about 30 ps. Electron injection from the iridium dye to TiO2 is analysed with respect to potential applications in solar energy conversion.

General Scheme for Oxidative Quenching of a Copper Bis-Phenanthroline Photosensitizer for Light-Driven Hydrogen Production

A new, general reaction scheme for photocatalytic hydrogen production is presented based on oxidative quenching of a homoleptic copper(I) bis-1,10-phenanthroline photosensitizer (PS) by 1-methyl-4-phenyl-pyridinium (MPP(+) ) as the electron relay and subsequent regeneration of the so formed copper(II) complex by a sacrificial electron donor. Electron transfer from the relay to various cobalt based water reduction catalysts and subsequent H2 production was shown to close the catalytic cycle. Transient absorption experiments unambiguously confirmed the proposed pathway, both the oxidative quenching and subsequent regeneration of oxidized PS. Photocatalytic test runs further confirmed the role of MPP(+) and up to 10 turnovers were achieved in the relay. The performance limiting factor of the system was shown to be the decomplexation of the copper PS. Quantum yields of the system were 0.03 for H2 production, but 0.6 for MPP(.) formation, clearly indicating that unproductive pathways still prevail.

Iron-catalyzed photoreduction of carbon dioxide to synthesis gas

Photocatalytic processes to convert CO₂ to useful products including CO and HCOOH are of particular interest as a means to harvest the power of the sun for sustainable energy applications. Herein, we report the photocatalytic reduction of CO₂ using iron-based catalysts and visible light generating varying ratios of synthesis gas.

Evaluation of bis-cyclometalated alkynylgold(iii) sensitizers for water photoreduction to hydrogen

Gold(iii) acetylide complexes actively catalyzed the light-driven evolution of hydrogen in water when using [Co(2,2′-bipyridine)₃]Cl₂ or [Rh(4,4′-di-tert-butyl-2,2′-bipyridine)₃](PF₆)₃ as a H₂-evolved catalyst.