Electrochemical cytosensor utilizing tetrahedral DNA/bimetallic AuPd holothurian-shaped nanoparticles for ultrasensitive non-destructive detection of circulating tumor cells

As a real-time fluid biopsy method, the detection of circulating tumor cells (CTCs) provides important information for the early diagnosis, precise treatment, and prognosis of cancer. However, the low density of CTCs in the peripheral blood hampers their capture and detection with high sensitivity and selectivity using currently available methods. Hence, we designed a sandwich-type electrochemical aptasensor that utilizes holothurian-shaped AuPd nanoparticles (AuPd HSs), tetrahedral DNA nanostructures (TDNs), and CuPdPt nanowire networks (NWs) interwoven with a graphdiyne (GDY) sheet for ultrasensitive non-destructive detection of MCF-7 breast cancer cells. CuPdPt NW-GDY effectively enhanced the electron transfer rate and coupled with the loaded TDNs. The TDNs could capture MCF-7 cells with precision and firmness, and the resulting composite complex was combined with AuPd HSs to form a sandwich-type structure. This novel aptasensor showed a linear range between 10 and 106 cells mL-1 and an ultralow detection limit of 7 cells mL-1. The specificity, stability, and repeatability of the measurements were successfully verified. Moreover, we used benzonase nuclease to achieve non-destructive recovery of cells for further clinical studies. According to the results, our aptasensor was more sensitive measuring the number of CTCs than other approaches because of the employment of TDNs, CuPdPt NW-GDY, and AuPd HSs. We designed a reliable sensor system for the detection of CTCs in the peripheral blood, which could serve as a new approach for cancer diagnosis at an early stage.

Promoting the Electrocatalytic Ethanol Oxidation Activity of Pt by Alloying with Cu

The development and commercialization of direct ethanol fuel cells requires active and durable electro-catalysts towards the ethanol oxidation reactions (EOR). Rational composition and morphology control of Pt-based alloy nanocrystals can not only enhance their EOR reactivity but also reduce the consumption of precious Pt. Herein, PtCu nanocubes (NCs)/CB enclosed by well-defined (100) facets were prepared by solution synthesis, exhibiting much higher mass activity (4.96 A mgPt−1) than PtCu nanoparticles (NPs)/CB with irregular shapes (3.26 A mgPt−1) and commercial Pt/C (1.67 A mgPt−1). CO stripping and in situ Fourier transform infrared spectroscopy (FTIR) experiments indicate that the alloying of Cu enhanced the adsorption of ethanol, accelerated the subsequent oxidation of intermediate species, and increased the resistance to CO poisoning of PtCu NCs/CB, as compared with commercial Pt/C. Therefore, alloying Pt with earth-abundant Cu under rational composition and surface control can optimize its surface and electronic structures and represents a promising strategy to promote the performance of electro-catalysts while reduce the use of precious metals.

IrCuNi Deeply Concave Nanocubes as Highly Active Oxygen Evolution Reaction Electrocatalyst in Acid Electrolyte

Proton exchange membrane water electrolyzer can sustainably and environmentally friendly produce hydrogen. However, it is hindered by the lack of high-performance anode catalysts for oxygen evolution reaction (OER) in acid electrolyte. Herein, IrCuNi deeply concave nanocubes (IrCuNi DCNCs) are successfully synthesized from the selective etching of the facet of cubic nanoparticles, and they significantly boost the OER. The obtained IrCuNi DCNCs show high activity toward OER in the acidic electrolyte, which only requires an overpotential of 273 mV to achieve the OER current density of 10 mA cm^-2 at a low Ir loading of 6.0 μg_Ir cm^-2. The precious metal based mass activity is 6.6 A mg_Ir^-1 at 1.53 V, which is 19 times as high as that of pristine Ir. It demonstrates that the outstanding catalytic performance is beneficial from the well-defined multimetal concave nanostructures, which may shed light on the fabrication of efficient water electrolyzers.

Grain Boundaries Boost Oxygen Evolution Reaction in NiFe Electrocatalysts

In a polycrystalline material, the grain boundaries (GBs) can be effective active sites for catalytic reactions by providing an electrodynamically favorable surface. Previous studies have shown that grain boundary density is related to the catalytic activity of the carbon dioxide reduction reaction, but there is still no convincing evidence that the GBs provide surfaces with enhanced activity for oxygen evolution reaction (OER). Combination of various electrochemical measurements and chemical analysis reveals the GB density at surface of NiFe electrocatalysts directly affects the overall OER. In situ electrochemical microscopy vividly shows that the OER occurs mainly at the GB during overall reaction. It is observed that the reaction determining steps are altered by grain boundary densities and the meaningful work function difference between the inside of grain and GBs exists. High-resolution transmission electron microscopy shows that extremely high index planes are exposed at the GBs, enhancing the oxygen evolution activity. The specific nature of GBs and its effects on the OER demonstrated in this study can be applied to the various polycrystalline electrocatalysts.

Synergism of Multicomponent Catalysis: One-Dimensional Pt-Rh-Pd Nanochain Catalysts for Efficient Methanol Oxidation

Designing Pt-based alloy catalysts with multicomponent composition and a controllable structure is important to improve the utilization efficiency of precious metals and catalytic activity, but it still face a lot of challenges for simple preparation. Herein, we used insulin amyloid fibrils as templates and their own one-dimensional spiral structure to synthesize Pt-Rh-Pd ternary alloy nanochains under mild conditions. The prepared Pt-Rh-Pd alloy nanochains (NCs) have uniform diameter, and the particle size is only 2 nm. This ultrafine structure increases the specific surface area of the catalyst to a certain extent, and the synergistic effect of the three metals improves the catalytic performance. Compared with commercial Pt/C and binary Pt-Rh NCs, the as-presented Pt-Rh-Pd NCs show better methanol oxidation activity ability and stability against CO poisoning. The peak current density of front sweep is 1.48 mA cm-2, which is 1.7 times higher than that of commercial Pt/C (0.89 mA cm-2) and 1.4 times higher than that of the Pt-Rh NCs (1.07 mA cm-2), indicating great application potential as high-performance electrocatalysts in fuel cells.

Tunable Hollow Pt@Ru Dodecahedra via Galvanic Replacement for Efficient Methanol Oxidation

Pt-Ru nanocrystals are promising electrocatalysts for methanol oxidation in fuel cells. However, owing to the lattice mismatch and high reduction potential of Ru, the shape-controlled synthesis of Pt-Ru nanocrystals faces great challenges. Herein, we employ a galvanic replacement method to synthesize tunable hollow Pt@Ru dodecahedra via controlling the precursor concentration. Two typical structures, hollow Pt@Ru dodecahedra (h-Pt@Ru) and deformed hollow Pt@Ru dodecahedra (d-Pt@Ru), are obtained to exhibit superior electrocatalytic activities for methanol oxidation. The optimal d-Pt@Ru dodecahedra present a mass activity of 0.80 A mg_Pt^-1 and a specific activity of 1.61 mA cm_Pt^-2, which are 5.25 and 7.78 times higher than those of the commercial Pt/C, respectively. Remarkably, both h-Pt@Ru and d-Pt@Ru show lower oxidation potentials and higher CO-poisoning resistance for methanol oxidation than PtRu nanoparticles (NPs) and commercial Pt/C. This is attributed to the hollow dodecahedron structures with optimal spatial elemental distributions, leading to high utilization of Pt at edges and corners and the exposure of abundant Pt-Ru interfaces. Our strategy offers a facile method to engineer bimetallic metal catalysts regardless of lattice mismatch.

Trimetallic PdCuAu Nanoparticles for Temperature Sensing and Fluorescence Detection of H 2 O 2 and Glucose

The design of palladium-based nanostructures has good prospects in various applications. This paper reports a simple one-step synthesis method of PdCuAu nanoparticles (PdCuAu NPs) prepared directly in aqueous solution. PdCuAu NPs have attracted much attention owing to their unique synergistic electronic effect, optical and catalytic performance. As temperature sensor, PdCuAu NPs are sensitive to the fluorescence intensity change in the temperature range of 4-95°C, which is due to its unique optical properties. The prepared PdCuAu NPs have excellent catalytic performance for peroxidase-like enzymes. It can catalyze TMB rapidly in the presence of hydrogen peroxide and oxidize it to visible blue product (oxTMB). Based on its unique peroxidase-like properties, this study used PdCuAu NPs colorimetric platform detection of hydrogen peroxide and glucose. The linear ranges of hydrogen peroxide and glucose were 0.1-300 μM and 0.5-500 μM, respectively, and the detection limits (LOD) were 5 and 25 nM, respectively. This simple and rapid method provides a good prospect for the detection of H2O2 and glucose in practical applications.

Facile synthesis of ternary PtPdCu alloy hexapods as highly efficient electrocatalysts for methanol oxidation

Developing an efficient Pt-based multimetallic electrocatalyst with well-defined shapes for methanol oxidation reaction (MOR) is critical, however, it still remains challenging. Here we report a one-pot approach for the synthesis of ternary PtPdCu alloy hexapods with different compositions. Their MOR activities increased in the sequence Pt₂PdCu₄ < Pt₃PdCu₄ < Pt₅PdCu₅, and were substantially higher than that of commercial Pt/C. Specifically, the Pt₅PdCu₅ hexapods exhibited the highest mass (0.97 mA μg_Pt ^-1) and specific (7.39 mA cm^-2) activities towards MOR, and were 5.4 and 19.4 times higher than those of commercial Pt/C (0.18 mA μg_Pt ^-1 and 0.38 mA cm^-2), respectively. This enhancement could be probably attributed to the bifunctional mechanism and ligand effect through the addition of Cu and Pd as well as the unique dendritic structure. The better tolerance for CO poisoning also endowed the PtPdCu hexapods with superior durability relative to commercial Pt/C.

PtNixCoy concave nanocubes: synthesis and application in photocatalytic hydrogen generation

PtNi_xCo_y alloy concave nanocubes coupled with CdS nanorods were applied in the H₂ evolution reaction under visible light irradiation.

Seed-mediated synthesis of Au@PtCu nanostars with rich twin defects as efficient and stable electrocatalysts for methanol oxidation reaction

Pt-based nanocrystals with a twinned structure are highly desirable to achieve high performances in both catalytic activity and durability for methanol oxidation reaction (MOR). However, it still remains great challenge for producing such twinned nanocrystals due to the high internal strain energy of Pt. Here we present a seed-mediated approach to generate Au@PtCu nanostars with a five-fold twinned structure using Au decahedra as seeds. The composition of Pt/Cu in the nanocrystals was tuned by varying the molar ratio of Pt to Cu salt precursors with the amount of Au seeds being the same. Through composition optimization, Au@Pt1.2Cu nanostars achieved the highest specific (1.06 mA cm-2) and mass (0.18 mA mgPt -1) activities for MOR, which were about 5.9 and 1.6 times higher than those of commercial Pt/C, respectively. After accelerated stability test (ADT) for 1500 cycles, such nanostars remained ∼95% of specific activity compared to a loss of ∼28% for commercial Pt/C, indicting their superior durability for MOR. We believed that this enhancement may arise from the unique twinned structure and possible synergetic effect between Pt and Cu components.

The in situ etching assisted synthesis of Pt-Fe-Mn ternary alloys with high-index facets as efficient catalysts for electro-oxidation reactions

Pt-Based alloys enclosed with high-index facets (HIFs) generally show much higher specific catalytic activities than their counterparts with low-index facets in electro-catalytic reactions. However, the exposure of a certain Pt surface would require a well-defined nanostructure, which usually can only be obtained at larger sizes. Therefore, a low dispersion of Pt atoms in Pt-based alloys with HIFs would affect the atomic utilization of Pt, resulting in most of these Pt-based alloys exhibiting lower mass activity than commercial Pt/C and Pt black catalysts for electro-catalytic reactions. Herein, we address a novel strategy to divide the surface areas of larger sized nanocrystals into small surface area nanocrystals by in situ etching Pt-Fe-Mn concave cubes (CNCs) while maintaining the morphology of the Pt-Fe-Mn alloys to improve the utilization of Pt atoms and thus increase the mass activity. Remarkably, the Pt-Fe-Mn unique concave cube (UCNC) nanocrystals (NCs) showed much higher specific and mass activities toward the methanol oxidation reaction (MOR) than the Pt-Fe-Mn CNCs, commercial Pt black and Pt/C. The kinetic analysis from Tafel plots indicated that UCNC Pt-Fe-Mn NCs had the lowest Tafel slope at whole potentials and the splitting of the first C-H bond of a CH3OH molecule with the first electron transfer was the rate-determining step at high potentials (above 0.45 V). In situ Fourier transform infrared reflection (FTIR) spectroscopic investigation at the molecular level indicated that methanol chemical absorption took place at a low potential of -0.2 V at the UCNC NC electrode. Meanwhile, much higher CO2 productivity was observed at the UCNC NC electrode, indicating the strong anti-poisoning ability of the UCNC Pt-Fe-Mn NCs during methanol electrooxidation. Furthermore, in the formic acid oxidation (FAOR) test, the activity and long-term durability of the Pt-Fe-Mn UCNC NCs were also found to be superior to those of the Pt-Fe-Mn CNCs, commercial Pt black and Pt/C. The enhanced catalytic performance in both the MOR and FAOR is most probably due to the unique HIF structure consisting of small sized particles, enhanced Pt utilization, the richness of crystalline defects and synergetic effects of Pt, Fe, and Mn metals. Our present work provides an insight into the rational design of Pt based alloys with HIFs to improve the catalytic performance of electro-catalytic reactions for fundamental study.

Shape-controlled metal nanoparticles for electrocatalytic applications

The application of shape-controlled metal nanoparticles is profoundly impacting the field of electrocatalysis. On the one hand, their use has remarkably enhanced the electrocatalytic activity of many different reactions of interest. On the other hand, their usage is deeply contributing to a correct understanding of the correlations between shape/surface structure and electrochemical reactivity at the nanoscale. However, from the point of view of an electrochemist, there are a number of questions that must be fully satisfied before the evaluation of the shaped metal nanoparticles as electrocatalysts including (i) surface cleaning, (ii) surface structure characterization, and (iii) correlations between particle shape and surface structure. In this chapter, we will cover all these aspects. Initially, we will collect and discuss about the different practical protocols and procedures for obtaining clean shaped metal nanoparticles. This is an indispensable requirement for the establishment of correct correlations between shape/surface structure and electrochemical reactivity. Next, we will also report how some easy-to-do electrochemical experiments including their subsequent analyses can enormously contribute to a detailed characterization of the surface structure of the shaped metal nanoparticles. At this point, we will remark that the key point determining the resulting electrocatalytic activity is the surface structure of the nanoparticles (obviously, the atomic composition is also extremely relevant) but not the particle shape. Finally, we will summarize some of the most significant advances/results on the use of these shaped metal nanoparticles in electrocatalysis covering a wide range of electrocatalytic reactions including fuel cell-related reactions (electrooxidation of formic acid, methanol and ethanol and oxygen reduction) and also CO2 electroreduction.

Graphical Abstract:

Uric acid supported one-pot solvothermal fabrication of rhombic-like Pt35Cu65 hollow nanocages for highly efficient and stable electrocatalysis

High activity and good durability of electrocatalysts are of significance in practical applications of fuel cells. Among them, multi-component metallic hollow nanocages/nanoframes show great potential as advanced catalysts because of their highly open structures, large surface area and good stability. Herein, we report a general uric acid-mediated solvothermal method for shape-controlled synthesis of rhombic-like Pt₃₅Cu₆₅ hollow nanocages (HNCs) with uric acid as co-reductant and co-structure-directing agent. Uric acid and cetyltrimethylammonium chloride (CTAC) played important roles in the hollow cages. The specific architectures showed remarkably enhanced catalytic properties towards glycerol oxidation reaction (GOR), ethylene glycol oxidation reaction (EGOR) and oxygen reduction reaction (ORR) with the enhanced specific activity, outperforming commercial Pt/C (20 wt%). This work provides a new avenue for rational design of novel bimetallic nanocatalysts with enhanced characters in energy storage and conversion.

Shaping well-defined noble-metal-based nanostructures for fabricating high-performance electrocatalysts: advances and perspectives

This review highlights recent advances in shaping protocols and structure-activity relationships of noble-metal-based catalysts with well-defined nanostructures in electrochemical reactions.

Synthesis and facile structure-adjusting of Pd–Pt nanocrystal electrocatalysts with improved activity for ethanol oxidation reaction

Illustration of the synthesis of the nanospheroid-, nanoflower- and nanoworm-Pd–Pt NCs and their electrocatalytic activity for ethanol oxidation.

A label-free immunosensor for the detection of nuclear matrix protein-22 based on a chrysanthemum-like Co-MOFs/CuAu NWs nanocomposite

In this study, a new, simple, and label-free electrochemical immunosensor was presented for the detection of nuclear matrix protein-22 (NMP-22). In order to accurately monitor very small amounts of NMP-22, it was advantageous to use highly efficient nanomaterials as signals. For this reason, we synthesized a chrysanthemum-like nanocomposite (Co-MOFs/CuAu NWs), using Co-based metal-organic frameworks (Co-MOFs) as carriers and copper gold nanowires (CuAu NWs) wrapped around their surface, which was applied for modifying a glassy carbon electrode (GCE). The Co-MOFs/CuAu NWs possessed outstanding catalytic capabilities, which served as signal materials and simultaneously carried the anti-NMP-22 antibody (Ab). When different concentrations of the NMP-22 antigen (Ag) were specifically attached to the immunosensor, the current responses decreased by varying degrees. The designed biosensor used the principle to establish a linear regression equation and achieve an accurate quantification of NMP-22. After optimization, the NMP-22 sensor exhibited a good linear response over a concentration range from 0.1 pg mL^-1 to 1 ng mL^-1, with a lower detection limit of 33 fg mL^-1 (based on S/N = 3). The proposed biosensor demonstrated the advantages of ultra-sensitivity, high specificity and acceptable reproducibility, suggesting that the proposed strategy has the potential for the quantification of NMP-22 in human urine samples. Moreover, the novel nanocomposite Co-MOFs/CuAu NWs are promising materials for electrochemical sensors to detect other biomolecules.

Controlled Synthesis of PtNi Hexapods for Enhanced Oxygen Reduction Reaction

Well-defined PtNi nanocrystals represent one of the most efficient electrocatalysts to boost the oxygen reduction reaction (ORR), especially in the shape of octahedrons, nanoframes, and nanowires. However, the synthesis of complex PtNi nanostructure is still a great challenge. Herein, we report a new class of PtNi hexapods with high activity and stability toward ORR. The hexapods are prepared by selective capping and simultaneous corrosion. By controlling the oxidative etching, PtNi polyhedrons and nanoparticles are obtained, respectively. The intriguing hexapods are composed of six nanopods with an average length of 12.5 nm. Due to their sharp tips and three-dimensional (3D) accessible surfaces, the PtNi hexapods show a high mass activity of 0.85 A mg Pt - 1 at 0.9 V vs. RHE, which are 5.4-fold higher than commercial Pt/C, also outperforming PtNi polyhedrons and PtNi nanoparticles. In addition, the mass activity of PtNi hexapods maintains 92.3% even after 10,000 potential cycles.

Concave Platinum-Copper Octopod Nanoframes Bounded with Multiple High-Index Facets for Efficient Electrooxidation Catalysis

Multimetallic nanoframes with three-dimensional (3D) catalytic surfaces represent an emerging class of efficient nanocatalysts. However, it still remains a challenge in engineering nanoframes via simple and economical methods. Herein, we report a facile one-pot synthetic strategy to synthesize Pt-Cu nanoframes bounded with multiple high-index facets as highly active electrooxidation catalysts. Two distinct octopod nanoframes, namely, concave PtCu₂ octopod nanoframes (PtCu₂ CONFs) and ultrathin PtCu octopod nanoframes (PtCu UONFs) were successfully synthesized by simply changing the feeding Pt and Cu precursors. Interestingly, the PtCu₂ CONFs are constructed by eight symmetric feet with sharp tips, which are enclosed by high-index facets of n (111)-(111), such as {553}, {331}, and {221}. Benefiting from their 3D accessible surfaces and multiple high-index facets, the self-supported PtCu₂ CONFs catalysts exhibit excellent electrocatalytic performance and superior CO-tolerant ability. For methanol oxidation reaction, the PtCu₂ CONFs catalysts exhibit more than 7-fold increase in activities, 205 mV lower in the onset potential compared with commercial Pt/C. More importantly, when facing harsh electrochemical reaction conditions, the PtCu₂ CONFs are well-preserved in the catalytic activities, architectural features, and stepped surfaces. The PtCu UONFs with 12 ultrathin edges, however, suffer from breakdown. The present work provides guidelines for the rational design and synthesis of nanoframe catalysts with both high activity and stability.

Dendritic Ternary Alloy Nanocrystals for Enhanced Electrocatalytic Oxidation Reactions

Engineering the morphology and composition of multimetallic nanocrystals composed of noble and 3d transition metals has been of great interest due to its high potential to the development of high-performance catalytic materials for energy and sustainability. In the present work, we developed a facile aqueous approach for the formation of homogeneous ternary alloy nanocrystals with a dendritic shape, Pt-Pd-Cu nanodendrites, of which synthesis is hard to be achieved because of synthetic difficulties. Proper choice of stabilizer and fine control over the amount of stabilizer and reductant allowed the successful formation of Pt-Pd-Cu nanodendrites with controlled sizes and compositions. The prepared ternary alloy nanodendrites exhibited considerably improved electrocatalytic performance toward methanol and ethanol oxidation reactions compared to their binary alloy counterparts and commercial Pt and Pd catalysts, as well as to previously reported Pt- and Pd-based nanocatalysts because of synergism between their morphological and compositional characteristics. We anticipate that the present approach will be helpful to develop efficient electrocatalysis systems for practical applications.

Amperometric myeloperoxidase immunoassay based on the use of CuPdPt nanowire networks

This research describes a nanowire network-based method for detecting the activity of myeloperoxidase (MPO), a biomarker of acute coronary syndromes (ACS). Trimetallic CuPdPt nanowire networks (CuPdPt NWNWs) were prepared by a one-step chemical reduction method. The metallic precursors quickly form nanowire network structures without the need for additional capping agents or surfactants. This process creates a product with a clean surface. The NWNWs were dropped onto a glassy carbon electrode (GCE) to obtain a sensor with good catalytic activity towards the reduction of hydrogen peroxide (H₂O₂), which was used as an electrochemical probe working at -0.4 V (vs. SCE). It also provided a large surface for further modification. Next, an antibody against MPO was immobilized on the modified GCE via the stable conjunction between Cu, Pt, Pd and amino groups. Upon binding of MPO to the antibody on the GCE, the current response to H₂O₂ was reduced by 35 μA·cm^-2. The immunosensor had a linear response within the 100 fg·mL^-1 to 50 ng·mL^-1 MPO concentration range and a 33 fg·mL^-1 detection limit (at an S/N ratio of 3). The recovery of spiked serum samples ranged from 99.8 to 103.6%. This result suggests that the method can be applied to the quantitation of MPO in human serum samples. Graphical abstract A trimetallic CuPdPt nanowire networks was placed on a glassy cabon electrode (GCE) to design an immunosensor for myeloperoxidase (MPO), a biomarker for the acute coronary syndrome (ACS). Antibody against MPO was immobilized on the network via conjugation between Cu, Pt, Pd and amino groups. Amperometric i-t measurements were conducted to quantify the amount of MPO that binds to the antibody on the surface of the modified GCE.

A General Strategy Assisted with Dual Reductants and Dual Protecting Agents for Preparing Pt-Based Alloys with High-Index Facets and Excellent Electrocatalytic Performance

Synthesizing noble metallic nanoparticles (NPs) enclosed by high-index facets (HIFs) is challenged as it involves the tuning of growth kinetics, the selective adsorption of certain chemical species, and the epitaxial growth from HIF enclosed seeds. Herein, a simple and general strategy is reported by using dual reduction agents and dual capping agents to prepare Pt-based alloy NPs with HIFs, in which both glycine and poly(vinylpyrrolidone) serve as the reductants and capping agents. Due to the facilely tunable growth/nucleation rates and protecting abilities of the reductants and capping agents, Pt concave nanocube (CNC), binary Pt-Ni CNC, ternary Pt-Mn-Cu CNC, and Pt-Mn-Cu ramiform polyhedron alloy NPs terminated by HIFs as well as other NPs with well-defined morphologies such as Pt-Mn-Cu nanocube and Pt-Mn-Cu nanoflower are obtained with this approach. Owing to the high density of low-coordinated Pt sites (HIF structure) and the unique electronic effect of Pt-Mn-Cu ternary alloys, the as-prepared Pt-Mn-Cu NPs show enhanced catalytic activity toward methanol and formic acid electro-oxidation reactions with excellent stability. This work provides a promising methodology for designing and fabricating Pt-based alloy NPs as efficient fuel cell catalyst.

One-Pot Synthesis of Concave Platinum-Cobalt Nanocrystals and Their Superior Catalytic Performances for Methanol Electrochemical Oxidation and Oxygen Electrochemical Reduction

Exploring highly efficient electro-catalysts is of significant urgency for the widespread uptake of the direct methanol fuel cells (DMFCs). Pt-Co nanocrystals have attracted considerable attentions because of their superior catalytic performance toward both methanol oxidation and oxygen reduction in the preliminary assessments. This Research Article presents a Pt-Co bimetal catalyst that is synthesized through a facile coreduction strategy. The Pt-Co nanocrystals have concave cubic shape with a high uniform size of 7-9 nm and Pt-rich surfaces. The catalysis of the concave cubic Pt-Co nanoparticles toward both methanol electrochemical oxidation reaction (MOR) and oxygen electrochemical reduction reaction (ORR) is evaluated. In comparison with the commercial Pt/C catalyst (Johnson Matthey), the present concave cubic Pt-Co catalyst displays superior performances in not only catalytic activity but also durability. The concave Pt-Co catalyst also shows higher activities than spherical and cubic Pt-Co nanoparticles. The dramatic enhancement is mainly attributed to its alloyed composition, Pt-rich surface and the concave nanostructure. The results of our research indicate that the concave Pt-Co nanocrystal could be a promising catalyst for both MOR and ORR. The present work might also raise more concerns on exploiting morphology and composition of nanocrystal catalysts, which are expected to provide high catalytic performance in electrochemical reactions.

Branched PdAu nanowires with superior electrocatalytic formic acid oxidation activities

Branched PdAu nanowires supported on graphene were prepared as catalysts for formic acid electro-oxidation, and they exhibited higher catalytic activity and durability than Pd/graphene and commercial Pd/C catalysts.

Rational selection of halide ions for synthesizing highly active Au@Pd nanobipyramids

Highly active Au@Pd nanobipyramids were synthesized using Br⁻ ions as an appropriate growth modifier.

One-pot synthesis of cubic PtPdCu nanocages with enhanced electrocatalytic activity for reduction of H2O2

Cubic PtPdCu nanocages were prepared using Cu₂O as sacrificial templates and applied to detect H₂O₂. PtPdCu nanocages exhibit high sensitivity at a low potential of 0.05 V. The high activity is related to the hollow structure and synergistic effect.

3D Quantification of Low-Coordinate Surface Atom Density: Bridging Catalytic Activity to Concave Facets of Nanocatalysts in Fuel Cells

A protocol to quantify the distribution of surface atoms of concave nanocatalysts according to their coordination number is proposed. The 3D surface of an Au@Pd concave nanocube is reconstructed and segmented. The crystallographic coordinates and low-coordinate surface atom densities of the concave facets are determined. The result shows that 32% of the surface atoms are low-coordinated, which may contribute to the high activity.

Porous AgPt@Pt Nanooctahedra as an Efficient Catalyst toward Formic Acid Oxidation with Predominant Dehydrogenation Pathway

For direct formic acid fuel cells (DFAFCs), the dehydrogenation pathway is a desired reaction pathway, to boost the overall cell efficiency. Elaborate composition tuning and nanostructure engineering provide two promising strategies to design efficient electrocatalysts for DFAFCs. Herein, we present a facile synthesis of porous AgPt bimetallic nanooctahedra with enriched Pt surface (denoted as AgPt@Pt nanooctahedra) by a selective etching strategy. The smart integration of geometric and electronic effect confers a substantial enhancement of desired dehydrogenation pathway as well as electro-oxidation activity for the formic acid oxidation reaction (FAOR). We anticipate that the obtained nanocatalyst may hold great promises in fuel cell devices, and furthermore, the facile synthetic strategy demonstrated here can be extendable for the fabrication of other multicomponent nanoalloys with desirable morphologies and enhanced electrocatalytic performances.

One-Pot Synthesis of Highly Anisotropic Five-Fold-Twinned PtCu Nanoframes Used as a Bifunctional Electrocatalyst for Oxygen Reduction and Methanol Oxidation

Five-fold-twinned PtCu nanoframes (NFs) with nanothorns protruding from their edges are synthesized by a facile one-pot method. Compared to commercial Pt/C catalyst, the obtained highly anisotropic five-fold-twinned PtCu NFs show enhanced electrocatalytic performance toward the oxygen reduction reaction and methanol oxidation reaction under alkaline conditions.

Bimetallic PtxCoy nanoparticles with curved faces for highly efficient hydrogenation of cinnamaldehyde

The control of the curved structure of bimetallic nanocrystals is a challenge, due to the rate differential for atom deposition and surface diffusion of alien atomic species on specific crystallographic planes of seeds. Herein, we report how to tune the degree of concavity of bimetallic PtxCoy concave nanoparticles using carboxylic acids as surfactants with an oleylamine system, leading to the specific crystallographic planes being exposed. The terminal carboxylic acids with a bridge ring or a benzene ring serving as structure regulators could direct the formation of curved faces with exposed high-index facets, and long-chain saturated fatty acids favored the production of curved faces with exposed low-index facets, while long-chain olefin acids alone benefited the formation of a flat surface with exposed low-index planes. Furthermore, these PtxCoy particles with curved faces displayed superior catalytic behaviour to cinnamaldehyde hydrogenation when compared with PtxCoy with flat faces. PtxCoy nanoparticles with curved faces exhibited over 6-fold increase in catalytic activity compared to PtxNiy nanoparticles with curved faces, and near 40-fold activity increase was observed in comparison with PtxFey nanoparticles with curved faces.

Hydrogen adsorption-mediated synthesis of concave Pt nanocubes and their enhanced electrocatalytic activity

Concave nanocubes are enclosed by high-index facets and have negative curvature; they are expected to have enhanced reactivity, as compared to nanocubes with flat surfaces. Herein, we propose and demonstrate a new strategy for the synthesis of concave Pt nanocubes with {hk0} high-index facets, by using a hydrogen adsorption-mediated electrochemical square-wave potential method. It was found that Pt atoms prefer to deposit on edge sites rather than terrace sites on Pt surfaces with intensive hydrogen adsorption, resulting in the formation of concave structures. The as-prepared concave Pt nanocubes exhibit enhanced catalytic activity and stability towards oxidation of ethanol and formic acid in acidic solutions, compared to commercial Pt/C catalysts.

Well-faceted noble-metal nanocrystals with nonconvex polyhedral shapes

Precise engineering of noble-metal nanocrystals (NCs) is not only an important fundamental research topic, but also has great realistic significance in improving their performances required by the poor reserve and high cost of noble metals. Well-faceted noble-metal NCs with nonconvex polyhedral shapes could be promising candidates to optimize their performance and thus minimize their usage, as they may integrate a well-defined surface structure and a large surface area together, enabling them to have outstanding performance and high efficiency of atomic utilization. Moreover, undesirable aggregation and ripening phenomena could be avoided. This review provides a comprehensive summary of the unique characteristics and corresponding models of well-faceted nonconvex polyhedral noble-metal NCs by classifying the cases into four distinct types, namely the concave polyhedral structure, excavated polyhedral structure, branched structure and nanocage structure, respectively. Due to the complexity of nonconvex morphologies and the thermodynamic antipathy for the growth of nonconvex shaped NCs, we firstly demonstrate the structure characterization and synthetic methodology in detail. Subsequently, typical applications in electrocatalysis and plasmonic fields are presented to demonstrate the unique surface and morphological effects generated from the well-faceted nonconvex NCs. To promote further development in this field, the perspectives and challenges concerning well-faceted noble-metal NCs with nonconvex shapes are put forward in the end.

Scalable synthesis of Cu-based ultrathin nanowire networks and their electrocatalytic properties

In this research, we developed an easy way to generate CuM (M = Pd, Pt and PdPt) ultrathin nanowire networks by simply injecting the metallic precursors into an aqueous solution which contained sodium borohydride under vigorous stirring. The reaction can be finished quickly without needing any other reagents, thus leaving the products with a clean surface. The prepared materials show an ultrathin diameter of less than 5 nanometers. The reaction can be easily amplified, resulting in scalable products. These properties combined with the superior catalytic performance of the prepared CuM nanowire networks underpin their potential use in glycerol electrooxidation reaction.