Selective and Sensitive Recognition of Cu2+in an Aqueous Medium: A Surface-Enhanced Raman Scattering (SERS)-Based Analysis with a Low-Cost Raman Reporter

Advancements in mercury detection using surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs): a review

Mercury (Hg) contamination remains a major environmental concern primarily due to its presence at trace levels, making monitoring the concentration of Hg challenging. Sensitivity and selectivity are significant challenges in the development of mercury sensors. Surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs) are two distinct analytical methods developed and employed for mercury detection. In this review, we provide an overview of the key aspects of SERS and IIP methodologies, focusing on the recent advances in sensitivity and selectivity for mercury detection. By examining the critical parameters and challenges commonly encountered in this area of research, as reported in the literature, we present a set of recommendations. These recommendations cover solid and colloidal SERS substrates, appropriate Raman reporter/probe molecules, and customization of IIPs for mercury sensing and removal. Furthermore, we provide a perspective on the potential integration of SERS with IIPs to achieve enhanced sensitivity and selectivity in mercury detection. Our aim is to foster the establishment of a SERS-IIP hybrid method as a robust analytical tool for mercury detection across diverse fields.

Improving Copper(II) Sensitivity by Combined use of AIEE Active and Inactive Schiff Bases

An aggregation-induced emission enhancement (AIEE) active Schiff base PNN was synthesized by condensing benzidine with 2-hydroxynaphthaldehyde. The green-fluorescent PNN (λem = 510 nm) in DMF turned to yellow-fluorescent PNN (λem = 557 nm) upon increasing the fractions of HEPES buffer (10 mM, pH 7.4) above 40%. The DLS study supports the self-aggregation of PNN that restricts the intramolecular rotation and activates the excited-state intramolecular proton transfer (ESIPT) process. The fluorescence emission of AIEE active PNN was quenched by Cu2+ with an estimated detection limit of 2.1 µM. Interestingly, the detection limit of PNN towards Cu2+ was improved in the presence of an AIEE inactive Schiff base PBPM obtained by reacting 1,4-diaminobenzene with pyridine-4-carbaldehyde. The mixed PNN-PBPM showed a detection limit of 0.49 µM. The practical utility of PNN-PBPM was validated by quantifying Cu2+ ions in real environmental water samples and green tea.

Acylhydrazone functionalized naphthalene-based self-assembled supramolecular gels for efficient fluorescence detection of Fe3

A new gel factor (named N) has been successfully designed and synthesized, which contains the conventional fluorophore naphthalene with the acylhydrazone bond as the self-assembly site. It can be self-assembled into stable organogels (named ON) in dimethyl sulfoxide (DMSO) and water mixed medium (V : V = 4 : 1) with a critical gel temperature and concentration (55 °C and 10 mg mL-1). Interestingly, under 365 nm UV light, the ON exhibits bright yellow Aggregation Induced Emission (AIE). The supramolecular organogel ON shows a fluorescent "OFF" response to the metal ions Fe3+, and the state of the gel ON remains constant before and after detection. Notably, the minimum detection limits (LODs) of the gel ON for Fe3+ are as low as 1.30 × 10-7 M. The binding mechanism of supramolecular organogels (ON) to ions has been investigated through a series of characterizations. Meanwhile, the organogel sensor ON can also be used as an ion-responsive membrane for the detection of Fe3+ in the aqueous phase.

Carbon dots fabricated by solid-phase carbonization using p-toluidine and l-cysteine for sensitive detection of copper

In this study, a label-free "turn off" fluorescent sensor has been resoundingly fabricated using carbon dots (CDs) for ultrasensitive detection of copper ions (Cu²⁺). CDs are prepared by solid phase carbonization method using p-toluidine and l-cysteine as the precursors. The synthesized CDs exhibited the highest fluorescence intensity with excitation and emission wavelengths set at 300 nm and 400 nm, respectively. The CDs were selective and sensitive to Cu²⁺ due to the static quenching mechanism. The concentration of CDs, and solution pH and incubation time were important parameters for the developed sensor. The experimental results showed that 20 mgL^-1 was enough for the analysis. As the solution pH was concerned, it was apparent that the sensor was endowed with an excellent response signal to Cu²⁺ and provided high sensitivity at pH 12. The interaction occurred very quickly, and the incubation time could be set at 1 min. The sensor provided a two-stage calibration curve to Cu²⁺ in the range of 0.05-0.7 and 0.7-4 μM with a limit of detection of 47 nM. The obtained results clearly demonstrated that this facile method was fast, reliable and selective for detecting Cu²⁺, which would explore a prospective strategy for developing effective and low-cost sensors for monitoring metal ions in aqueous environments.

Smart probe for simultaneous detection of copper ion, pyrophosphate, and alkaline phosphatase in vitro and in clinical samples

Wilson's disease (WD), which might lead to acute liver failure, is an inherited disorder characterized by accumulation of copper (Cu2+) in the brain, the liver, and other vital organs. In the clinic, decreased serum alkaline phosphatase (ALP) concentration is used for WD diagnosis. But to the best of our knowledge, using a fluorescent probe to simultaneously detect multiple factors in WD (e.g., Cu2+, pyrophosphate (PPi), and ALP) has not been reported. Herein, we rationally designed a fluorescent switch (E)-8-((4-methylbenzylidene)amino)napthalen-1-amine (L) and successfully applied it for sequential and selective detections of Cu2+, PPi, and ALP in vitro, in living cells and synovial fluid samples with "Off," "On," and "Off" fluorescence signals, respectively. Considering the obvious correlations among Cu2+, PPi, and ALP in WD, we envision that our fluorescent probe L could be applied to in vitro diagnosing WD in the near future.

In situ decoration of plasmonic silver nanoparticles on poly(vinylidene fluoride) membrane for versatile SERS detection

A new strategy based on a polymer sol was proposed for the in situ fabrication of a poly(vinylidene fluoride) (PVDF) membrane decorated with silver nanoparticles (AgNPs) for application in surface enhanced Raman scattering (SERS).

Molecular Affinity Agents for Intrinsic Surface-Enhanced Raman Scattering (SERS) Sensors

Research at the interface of synthetic materials, biochemistry, and analytical techniques has enabled sensing platforms for applications across many research communities. Herein we review the materials used as affinity agents to create surface-enhanced Raman spectroscopy (SERS) sensors. Our scope includes those affinity agents (antibody, aptamer, small molecule, and polymer) that facilitate the intrinsic detection of targets relevant to biology, medicine, national security, environmental protection, and food safety. We begin with an overview of the analytical technique (SERS) and considerations for its application as a sensor. We subsequently describe four classes of affinity agents, giving a brief overview on affinity, production, attachment chemistry, and first uses with SERS. Additionally, we review the SERS features of the affinity agents, and the analytes detected by intrinsic SERS with that affinity agent class. We conclude with remarks on affinity agent selection for intrinsic SERS sensing platforms.

Encapsulation of Dual-Emitting Fluorescent Magnetic Nanoprobe in Metal-Organic Frameworks for Ultrasensitive Ratiometric Detection of Cu2

An effective dual-emission fluorescent metal-organic framework (MOF)-based nanoprobe has been established for ultrasensitive and rapid ratiometric detection of Cu²⁺ . Such a nanoprobe was prepared by encapsulating fluorescein isothiocyanate (FITC), and Eu(III) complex-functionalized Fe₃ O₄ into the zeolitic imidazolate framework material (ZIF-8). In this nanoprobe, FITC was used as a reference signal, thus improving the influence of external uncertainties. The Eu-complex signal could be quenched after adding an amount of Cu²⁺ . The ZIF-8 could enrich the target analytes, which can amplify the fluorescence signal due to the good adsorption properties of the ZIF-8. Based on above structural and compositional features, the detection limit of the nanoprobe is 0.1 nm for Cu²⁺ , almost 2×10⁴ times lower than the maximum allowable amount of Cu²⁺ in drinking water, which constructed a platform for effective detection of Cu²⁺ . Using the nanoprobe to detect Cu²⁺ in aqueous solution is rapid and the probe still remained stable. Additionally, this sensor for the ratiometric fluorescence imaging of copper ions was also certified in real samples and live cells.

A pH dependent Raman and surface enhanced Raman spectroscopic studies of citrazinic acid aided by theoretical calculations

A pH dependent normal Raman scattering (NRS) and surface enhanced Raman scattering (SERS) spectral patterns of citrazinic acid (CZA), a biologically important molecule, have been investigated. The acid, with different pKa values (~4 and ~11) for the two different functional groups (-COOH and -OH groups), shows interesting range of color changes (yellow at pH~14 and brown at pH~2) with the variation in solution pH. Thus, depending upon the pH of the medium, CZA molecule can exist in various protonated and/or deprotonated forms. Here we have prescribed the existence different possible forms of CZA at different pH (Forms "C", "H" and "Dprot" at pH~14 and Forms "A", "D", and "P" at pH~2 respectively). The NRS spectra of these solutions and their respective SERS spectra over gold nanoparticles were recorded. The spectra clearly differ in their spectral profiles. For example the SERS spectra recorded with the CZA solution at pH~2 shows blue shift for different bands compared to its NRS window e.g. 406 to 450cm(-1), 616 to 632cm(-1), 1332 to 1343cm(-1) etc. Again, the most enhanced peak at ~1548cm(-1) in NRS while in the SERS window this appears at ~1580cm(-1). Similar observation was also made for CZA at pH~14. For example, the 423cm(-1) band in the NRS profile experience a blue shift and appears at ~447cm(-1) in the SERS spectrum as well as other bands at ~850, ~1067 and ~1214cm(-1) in the SERS window are markedly enhanced. It is also worth noting that the SERS spectra at the different pH also differ from each other. These spectral differences indicate the existence of various adsorptive forms of the CZA molecule depending upon the pH of the solution. Therefore based on the experimental findings we propose different possible molecular forms of CZA at different pH (acidic and alkaline) conditions. For example forms 'A', 'D' and 'P' existing in acidic pH (pH~2) and three other deprotonated forms 'C', 'H' and 'Dprot' in alkaline pH (pH~14). The DFT calculations for these prescribed model systems were also carried out to have a plausible understanding of their equilibrium geometries and the vibrational wavenumbers. An idea about the molecular orientation of the adsorbate over nanocolloidal gold substrate is also documented.

Mercury species induced frequency-shift of molecular orientational transformation based on SERS

We proposed a novel readout method based on a peculiar phenomenon in which the vibrational frequencies of a SERS-active probe (dimethyldithiocarbamic acid sodium salt, DASS) can be affected when there is mercury species.

Enlightening surface plasmon resonance effect of metal nanoparticles for practical spectroscopic application

Pictorial depiction of applications of metal nanoparticles in different fields enlightening surface plasmon resonance effect.

Surface enhanced Raman scattering of new acridine based fluorophore adsorbed on silver electrode

4,5-Bis(N,N-di(2-hydroxyethyl)iminomethyl)acridine (BHIA) is a new acridine based fluoroionophore and a highly-selective sensor for cadmium ion. The direct interaction of the aromatic nitrogen atom with a surface is impossible since there are bulky substituents in the 4,5-positions of the acridine fragment. Nevertheless BHIA molecule shows a reliable SERS spectrum while adsorbed on a silver electrode. The analysis of SERS spectra pH dependence reveals that BHIA species adsorbed on a surface can exist in both non-protonated and protonated forms. The adsorption of BHIA from alkaline solution is accompanied by carbonaceous species formation at the surface. The intensity of such "carbon bands" turned out to be related with the supporting electrolyte (KCl) concentration. Upon lowering the electrode potential the SERS spectra of BHIA do not undergo changes but the intensity of bands decreases. This indicates that the adsorption mechanism on the silver surface is realized via aromatic system of acridine fragment. In case of such an adsorption mechanism the chelate fragment of the BHIA molecule is capable of interaction with the solution components. Addition of Cd(2+) ions to a system containing BHIA adsorbed on a silver electrode in equilibrium with the solution leads to the formation of BHIA/Cd(2+) complex which desorption causes the loss of SERS signal.

Colorimetric determination of copper(ii) ions using gold nanoparticles as a probe

A colorimetric method for the fast, sensitive and selective detection of Cu²⁺ using gold nanoparticles was developed.

Gold and silver nanoparticle monomers are non-SERS-active: a negative experimental study with silica-encapsulated Raman-reporter-coated metal colloids

Noble metal nanoparticles (NPs) are the most commonly employed plasmonic substrates in surface-enhanced Raman scattering (SERS) experiments. Computer simulations show that monomers of Ag and Au nanocrystals ("spherical" NPs) do not exhibit a notable plasmonic enhancement, i.e., they are essentially non-SERS-active. However, in experiments, SERS enhanced by spherical NP colloids has been frequently reported. This implies that the monomers do not have strong SERS activity, but detectable enhancement should more or less be there. Because of the gap between theory and practice, it is important to demonstrate experimentally how SERS-active the metal colloid actually is and, in case a SERS signal is observed, where it originates from. In particular the aggregation of the colloid, induced by high centrifugal forces in washing steps or due to a harsh ionic environment of the suspension medium, should be controlled since it is the very high SERS activity of NP clusters which dominates the overall SERS signal of the colloid. We report here the experimental evaluation of the SERS activity of 80 nm Au and Ag NP monomers. Instead of showing fancy nanostructures and super SERS enhancement, we present the method on how to obtain negative experimental data. In this approach, no SERS signal was obtained from the colloid with a Raman reporter on the metal surface when the NPs were encapsulated carefully within a thick silica shell. Without silica encapsulation, if a very low centrifugation speed is used for the washing steps, only a negligible SERS signal can be detected even at very high NP concentrations. In contrast, strong SERS signals can be detected when the NPs are suspended in acidic solutions. These results indicate that Au and Ag NP monomers essentially exhibit no SERS activity of practical relevance.

Visual and portable strategy for copper(II) detection based on a striplike poly(thymine)-caged and microwell-printed hydrogel

Due to its importance to develop strategies for copper(II) (Cu(2+)) detection, we here report a visual and portable strategy for Cu(2+) detection based on designing and using a strip-like hydrogel. The hydrogel is functionalized through caging poly(thymine) as probes, which can effectively template the formation of fluorescent copper nanoparticles (CuNPs) in the presence of the reductant (ascorbate) and Cu(2+). On the hydrogel's surface, uniform wells of microliter volume (microwells) are printed for sample-injection. When the injected sample is stained by Cu(2+), fluorescent CuNPs will be in situ templated by poly T in the hydrogel. With ultraviolet (UV) irradiation, the red fluorescence of CuNPs can be observed by naked-eye and recorded by a common camera without complicated instruments. Thus, the strategy integrates sample-injection, reaction and indication with fast signal response, providing an add-and-read manner for visual and portable detection of Cu(2+), as well as a strip-like strategy. Detection ability with a detectable minimum concentration of 20 μM and practically applicable properties have been demonstrated, such as resistance to environmental interference and good constancy, indicating that the strategy holds great potential and significance for popular detection of Cu(2+), especially in remote regions. We believe that the strip-like hydrogel-based methodology is also applicable to other targets by virtue of altering probes.

Redox-responsive copper(I) metallogel: a metal-organic hybrid sorbent for reductive removal of chromium(VI) from aqueous solution

Herein, we report a new strategy to remove toxic Cr(VI) ion from aqueous solution using metal-organic hybrid gel as sorbent. The gel could be easily synthesized from the commercially available organic ligand 2-mercaptobenzimidazole (2-MBIm) and copper(II) chloride in alcoholic medium. The synthesis involves one-electron reduction of Cu(II) to Cu(I) by 2-MBIm, and then gel formation is triggered through Cu(I)-ligand coordination and extensive hydrogen-bonding interactions involving the "-NH" protons (of 2-MBIm ligand), solvent molecules, and chloride ions. The gel shows entangled network morphology. Different microanalytical techniques (FTIR, powder XRD, FESEM, TEM, rheology etc.) have been employed for complete characterizations of the gel sample. Both Cu(I) (in situ formed) and Cl(-) ions trigger the gel formation as demonstrated from systematic chemical analyses. The gel also exhibits its stimuli-responsive behavior toward different interfering chemical parameters (pH, selective metal ions and anions, selective complexing agents, etc.). Finally the gel shows its redox-responsive nature owing to the distinguished presence of Cu(I) metal centers throughout its structural backbone. And this indeed helps in the effective removal of Cr(VI) ions from aqueous solution. Reduction of Cr(VI) to Cr(III) ions and its subsequent sorption take place in the gel matrix. The reductive removal of Cr(VI) has been quantitatively interpreted through a set of different kinetic measurements/models, and the removal capacity of the gel matrix has been observed to be ∼331 mg g(-1) at pH ∼ 2.7, which is admirably higher than the commonly used adsorbents. However, the capacity decreases with the increase in pH of the solution. The overall removal mechanism has been clearly demonstrated. Again, the gel could also be recycled. Thus, the low-cost and large-scale fabrication of the redox-active metallogel makes it an efficient matrix for the toxic ion removal and hence indicates the high promise of this new generation hybrid material for environmental pollution abatement.

Redox-switchable copper(I) metallogel: a metal-organic material for selective and naked-eye sensing of picric acid

Thiourea (TU), a commercially available laboratory chemical, has been discovered to introduce metallogelation when reacted with copper(II) chloride in aqueous medium. The chemistry involves the reduction of Cu(II) to Cu(I) with concomitant oxidation of thiourea to dithiobisformamidinium dichloride. The gel formation is triggered through metal-ligand complexation, i.e., Cu(I)-TU coordination and extensive hydrogen bonding interactions involving thiourea, the disulfide product, water, and chloride ions. Entangled network morphology of the gel selectively develops in water, maybe for its superior hydrogen-bonding ability, as accounted from Kamlet-Taft solvent parameters. Complete and systematic chemical analyses demonstrate the importance of both Cu(I) and chloride ions as the key ingredients in the metal-organic coordination gel framework. The gel is highly fluorescent. Again, exclusive presence of Cu(I) metal centers in the gel structure makes the gel redox-responsive and therefore it shows reversible gel-sol phase transition. However, the reversibility does not cause any morphological change in the gel phase. The gel practically exhibits its multiresponsive nature and therefore the influences of different probable interfering parameters (pH, selective metal ions and anions, selective complexing agents, etc.) have been studied mechanistically and the results might be promising for different applications. Finally, the gel material shows a highly selective visual response to a commonly used nitroexplosive, picric acid among a set of 19 congeners and the preferred selectivity has been mechanistically interpreted with density functional theory-based calculations.

A fluorescent switch for sequentially and selectively sensing copper(ii) andl-histidine in vitro and in living cells

A new fluorescent switch was developed for sequential and selective sensing of Cu²⁺andl-histidine (l-His)in vitroand in living cells.