Rare-Earth nanoparticles with enhanced upconversion emission and suppressed rare-Earth-ion leakage

Dramatic Impact of Materials Combinations on the Chemical Organization of Core-Shell Nanocrystals: Boosting the Tm3+ Emission above 1600 nm

This article represents the first foray into investigating the consequences of various material combinations on the short-wave infrared (SWIR, 1000-2000 nm) performance of Tm-based core-shell nanocrystals (NCs) above 1600 nm. In total, six different material combinations involving two different types of SWIR-emitting core NCs (α-NaTmF4 and LiTmF4) combined with three different protecting shell materials (α-NaYF4, CaF2, and LiYF4) have been synthesized. All corresponding homo- and heterostructured NCs have been meticulously characterized by powder X-ray diffraction and electron microscopy techniques. The latter revealed that out of the six investigated combinations, only one led to the formation of a true core-shell structure with well-segregated core and shell domains. The direct correlation between the downshifting performance and the spatial localization of Tm3+ ions within the final homo- and heterostructured NCs is established. Interestingly, to achieve the best SWIR performance, the formation of an abrupt interface is not a prerequisite, while the existence of a pure (even thin) protective shell is vital. Remarkably, although all homo- and heterostructured NCs have been synthesized under the exact same experimental conditions, Tm3+ SWIR emission is either fully quenched or highly efficient depending on the type of material combination. The most efficient combination (LiTmF4/LiYF4) achieved a high photoluminescence quantum yield of 39% for SWIR emission above 1600 nm (excitation power density in the range 0.5-3 W/cm2) despite significant intermixing. From now on, highly efficient SWIR-emitting probes with an emission above 1600 nm are within reach to unlock the full potential of in vivo SWIR imaging.

Assessing the Effect of Surface Coating on the Stability, Degradation, Toxicity and Cell Endocytosis/Exocytosis of Upconverting Nanoparticles

Lanthanide-doped up-converting nanoparticles (UCNPs) have emerged as promising biomedical tools in recent years. Most research efforts were devoted to the synthesis of inorganic cores with the optimal physicochemical properties. However, the careful design of UCNPs with the adequate surface coating to optimize their biological performance still remains a significant challenge. Here, we propose the functionalization of UCNPs with four distinct types of surface coatings, which were compared in terms of the provided colloidal stability and resistance to degradation in different biological-relevant media, including commonly avoided analysis in acidic lysosomal-mimicking fluids. Moreover, the influence of the type of particle surface coating on cell cytotoxicity and endocytosis/exocytosis was also evaluated. The obtained results demonstrated that the functionalization of UCNPs with poly(isobutylene-alt-maleic anhydride) grafted with dodecylamine (PMA-g-dodecyl) constitutes an outstanding strategy for their subsequent biomedical application, whereas poly(ethylene glycol) (PEG) coating, although suitable for colloidal stability purposes, hinders extensive cell internalization. Conversely, surface coating with small ligand were found not to be suitable, leading to large degradation degrees of UCNPs. The analysis of particle' behavior in different biological media and in vitro conditions here performed pretends to help researchers to improve the design and implementation of UCNPs as theranostic nanotools.

Preventing cation intermixing enables 50% quantum yield in sub-15 nm short-wave infrared-emitting rare-earth based core-shell nanocrystals

Short-wave infrared (SWIR) fluorescence could become the new gold standard in optical imaging for biomedical applications due to important advantages such as lack of autofluorescence, weak photon absorption by blood and tissues, and reduced photon scattering coefficient. Therefore, contrary to the visible and NIR regions, tissues become translucent in the SWIR region. Nevertheless, the lack of bright and biocompatible probes is a key challenge that must be overcome to unlock the full potential of SWIR fluorescence. Although rare-earth-based core-shell nanocrystals appeared as promising SWIR probes, they suffer from limited photoluminescence quantum yield (PLQY). The lack of control over the atomic scale organization of such complex materials is one of the main barriers limiting their optical performance. Here, the growth of either homogeneous (α-NaYF₄) or heterogeneous (CaF₂) shell domains on optically-active α-NaYF₄:Yb:Er (with and without Ce³⁺ co-doping) core nanocrystals is reported. The atomic scale organization can be controlled by preventing cation intermixing only in heterogeneous core-shell nanocrystals with a dramatic impact on the PLQY. The latter reached 50% at 60 mW/cm²; one of the highest reported PLQY values for sub-15 nm nanocrystals. The most efficient nanocrystals were utilized for in vivo imaging above 1450 nm.

Influence of NaYF4 Inert and Active Layer on Upconversion Luminescence

NaYF₄:Yb,Er@NaYF₄ core-shell nanostructures were prepared to investigate their influence on upconversion (UC) luminescence. Tests revealed green radiation (⁴S_3/2→⁴I_15/2) and red radiation (⁴F_9/2→⁴I_15/2) first increased and then gradually decreased as Yb concentration increased in the NaYF₄ shell. The strongest fluorescent radiation occurred at an Yb concentration of 5%. To investigate the complicated variation of luminescence, we designed a set of experiments to study the impact of Yb ion concentration on luminescence intensity, and we analyzed the corresponding enhancement mechanism. It is probable that the energy transfers between both Yb and Er ions and Yb and Yb ions are involved in the UC processes. The enhancement of hybrid nanostructures has huge potential in biological detection and solar cells.

Nanocomposites based on lanthanide-doped upconversion nanoparticles: diverse designs and applications

Lanthanide-doped upconversion nanoparticles (UCNPs) have aroused extraordinary interest due to the unique physical and chemical properties. Combining UCNPs with other functional materials to construct nanocomposites and achieve synergistic effect abound recently, and the resulting nanocomposites have shown great potentials in various fields based on the specific design and components. This review presents a summary of diverse designs and synthesis strategies of UCNPs-based nanocomposites, including self-assembly, in-situ growth and epitaxial growth, as well as the emerging applications in bioimaging, cancer treatments, anti-counterfeiting, and photocatalytic fields. We then discuss the challenges, opportunities, and development tendency for developing UCNPs-based nanocomposites.

Achieving Effective Multimodal Imaging with Rare-Earth Ion-Doped CaF2 Nanoparticles

Nowadays, cancer poses a significant hazard to humans. Limitations in early diagnosis techniques not only result in a waste of healthcare resources but can even lead to delays in diagnosis and treatment, consequently reducing cure rates. Therefore, it is crucial to develop an imaging probe that can provide diagnostic information precisely and rapidly. Here, we used a simple hydrothermal method to design a multimodal imaging probe based on the excellent properties of rare-earth ions. Calcium fluoride co-doped with ytterbium, gadolinium, and neodymium (CaF2:Y,Gd,Nd) nanoparticles (NPs) is highly crystalline, homogeneous in morphology, and displays a high biosafety profile. In addition, in vitro and ex vivo experiments explored the multimodal imaging capability of CaF2:Y,Gd,Nd and demonstrated the efficient performance of CaF2:Y,Gd,Nd during NIR-II fluorescence/photoacoustic/magnetic resonance imaging. Collectively, our novel diagnosis nanoparticle will generate new ideas for the development of multifunctional nanoplatforms for disease diagnosis and treatment.

Rare-Earth Doping in Nanostructured Inorganic Materials

Impurity doping is a promising method to impart new properties to various materials. Due to their unique optical, magnetic, and electrical properties, rare-earth ions have been extensively explored as active dopants in inorganic crystal lattices since the 18th century. Rare-earth doping can alter the crystallographic phase, morphology, and size, leading to tunable optical responses of doped nanomaterials. Moreover, rare-earth doping can control the ultimate electronic and catalytic performance of doped nanomaterials in a tunable and scalable manner, enabling significant improvements in energy harvesting and conversion. A better understanding of the critical role of rare-earth doping is a prerequisite for the development of an extensive repertoire of functional nanomaterials for practical applications. In this review, we highlight recent advances in rare-earth doping in inorganic nanomaterials and the associated applications in many fields. This review covers the key criteria for rare-earth doping, including basic electronic structures, lattice environments, and doping strategies, as well as fundamental design principles that enhance the electrical, optical, catalytic, and magnetic properties of the material. We also discuss future research directions and challenges in controlling rare-earth doping for new applications.

Rare earth smart nanomaterials for bone tissue engineering and implantology: Advances, challenges, and prospects

Bone grafts or prosthetic implant designing for clinical application is challenging due to the complexity of integrated physiological processes. The revolutionary advances of nanotechnology in the biomaterial field expedite and endorse the current unresolved complexity in functional bone graft and implant design. Rare earth (RE) materials are emerging biomaterials in tissue engineering due to their unique biocompatibility, fluorescence upconversion, antimicrobial, antioxidants, and anti-inflammatory properties. Researchers have developed various RE smart nano-biomaterials for bone tissue engineering and implantology applications in the past two decades. Furthermore, researchers have explored the molecular mechanisms of RE material-mediated tissue regeneration. Recent advances in biomedical applications of micro or nano-scale RE materials have provided a foundation for developing novel, cost-effective bone tissue engineering strategies. This review attempted to provide an overview of RE nanomaterials' technological innovations in bone tissue engineering and implantology and summarized the osteogenic, angiogenic, immunomodulatory, antioxidant, in vivo bone tissue imaging, and antimicrobial properties of various RE nanomaterials, as well as the molecular mechanisms involved in these biological events. Further, we extend to discuss the challenges and prospects of RE smart nano-biomaterials in the field of bone tissue engineering and implantology.

A quantitative single-nanowire study on the plasmonic enhancement for the upconversion photoluminescence of rare-earth-doped nanoparticles

The enhancement effects of the upconversion photoluminescence of rare-earth-doped nanoparticles by the localized surface plasmon resonance of a single Ag nanowire are quantified on a single-nanowire scale assisted by selective etching treatment.

Local Structure Engineering in Lanthanide-Doped Nanocrystals for Tunable Upconversion Emissions

Upconversion emissions from lanthanide-doped nanocrystals have sparked extensive research interests in nanophotonics, biomedicine, photovoltaics, photocatalysis, etc. Rational modulation of upconversion emissions is highly desirable to meet the requirements of specific applications. Among the diverse developed methods, local structure engineering is fundamentally feasible, through which the upconversion emission intensity, selectivity, wavelength shift, and lifetime can be tuned effectively. The underlying mechanism of the local-structure-dependent upconversion emissions lies in the degree of parity hybridization and energy level splitting of lanthanide ions as well as the interionic energy transfer efficiency. Over the past few years, there has been significant progress in local-structure-engineered upconversion emissions. In this Perspective, we first introduce the principles of upconversion emissions and typical characterization methods for local structure. Subsequently, we summarize recent achievements in tuning of upconversion emissions through local structure engineering, including host composition adjustment, external field regulation, and interfacial strain management. Finally, we propose a few perspectives that should tackle the current bottlenecks. This Perspective is expected to deepen the understanding of local-structure-dependent upconversion emissions and arouse adequate attention to the engineering of local structure for desired properties of inorganic nanocrystals.

Functional Micro-/Nanomaterials for Multiplexed Biodetection

When analyzing biological phenomena and processes, multiplexed biodetection has many advantages over single-factor biodetection and is highly relevant to both human health issues and advancements in the life sciences. However, many key problems with current multiplexed biodetection strategies remain unresolved. Herein, the main issues are analyzed and summarized: 1) generating sufficient signal to label targets, 2) improving the signal-to-noise ratio to ensure total detection sensitivity, and 3) simplifying the detection process to reduce the time and labor costs of multiple target detection. Then, available solutions made possible by designing and controlling the properties of micro- and nanomaterials are introduced. The aim is to emphasize the role that micro-/nanomaterials can play in the improvement of multiplexed biodetection strategies. Through analyzing existing problems, introducing state-of-the-art developments regarding relevant materials, and discussing future directions of the field, it is hopeful to help promote necessary developments in multiplexed biodetection and associated scientific research.

Enhancing the static green up-conversion luminescence of NaY(MoO4)2:Yb/Er microcrystals via an annealing strategy for anti-counterfeiting applications

The majority of the fabrication procedures of lanthanide-doped materials involve thermal treatment that often results in crystallite regrowth, stabilizing the specific crystal structure and resulting in luminescence enhancement. The efficiency and intensity of up-conversion luminescence are closely related to the structure and synthesis process of the materials. Herein, well-crystallized and pure tetragonal NaY(MoO4)2 microcrystals with a uniform octahedral shape have been successfully synthesized via an environmentally friendly hydrothermal method, followed by annealing treatment. The phases, structures, morphologies, and compositions of the synthesized products annealed at 500-1000 °C remain unchanged, indicating high thermal stability. Furthermore, the NaY(MoO4)2:Yb3+/Er3+ microcrystals exhibit strong green emission when irradiated using infrared (980 nm) or ultraviolet (378 nm) wavelengths. Upon 980 nm excitation, up to 37-fold luminescence enhancement is achieved when the samples are annealed at about 700 °C. Interestingly, the high colour purity of the strong green emission is not only independent of the dopant concentration and heat treatment temperature, but it is also independent of the excitation conditions, including power and wavelength, and this makes it particularly suitable as a green safety signal light and luminescent security ink in paintings. As-prepared safety inks with NaY(MoO4)2:Yb3+/Er3+ microcrystals were used for visual fingerprint recognition printed on A4 paper with three-level fingerprint security features, significantly increasing the difficulty of illegal imitation and enhancing the levels of anti-counterfeiting.

Intermediate excited state suppression and upconversion enhancement of Er3+ ions by carbon-doping boosting photocarrier separation in bismuth oxychloride nanosheets

Low luminescence efficiency of rare-earth ions dopedupconversion (UC) nanomaterials is still a major limitation for their applications.Here, based on bismuth oxychloride nanosheets that show efficient photocarriers separation due to combining spontaneous polarization and layered semiconductor, we report a new carbon heterovalent doping strategy for efficient UC luminescence enhancement by suppressing the intermediate excited states of Er³⁺ ions. The first-principles calculations and photoelectrochemical characterizations provide evidences that the replacement of C ions for Cl strengthen the spontaneous polarization and inter electric field (IEF) of bismuth oxychloride nanosheets, which further improve the photocarriers separation efficiency. Under 808 or 980 nm excitation, the emission intensity of ⁴I_13/2 energy level of Er³⁺ ions (1550 nm) increase slightly with C doping, but the its decay time and the visible UC emission are improved tremendously at the same time. We show that the recombination rate of intermediate excited state electrons of Er³⁺ ions with the ground state is inhibited by the enhanced IEF, which promotes the energy reabsorption transition to upper energy levels, thus enhancing the visible UC emission. This work not only may provide a new insight into the method for engineering of UC emissions but also deepen the understanding for layered semiconducting material to modify the transition of Lanthanide ions.

Deciphering the role of temperature in Li+ co-dopant occupancy in BaYF5:Yb3+,Er3+ up-converting nanocrystals and its structure-property relationship

Precision engineering of defects in luminescent nanoscale crystalline materials with lesser controls to design is an area of interest in engineering materials with desired properties. Li⁺ co-doped BaYF₅ nanocrystals were engineered, and temperature as controls for determining the co-dopant occupancies in the host lattice is studied. An observed enhancement in the up-conversion photoluminescence results from the co-dopant occupancy at Ba²⁺ sites via substitution through the hot injection method, whereas for samples prepared using co-precipitation, photoluminescence quenching was observed, which can be correlated with the Li⁺ occupancy at the interstitial site near Er³⁺ and also due to the incorporation of OH^-. The crystal lattice deformation as a result of doping and the mechanism for the observed enhancement/quenching of luminescence are studied using x-ray diffraction, x-ray photoelectron spectroscopy, and energy transfer mechanism. Cytotoxicity assay and photoluminescence studies of the synthesized nanocrystals confirm that the material is biocompatible.

Desilylation Induced by Metal Fluoride Nanocrystals Enables Cleavage Chemistry In Vivo

Metal fluoride nanocrystals are widely used in biomedical studies owing to their unique physicochemical properties. The release of metal ions and fluorides from nanocrystals is intrinsic due to the solubility equilibrium. It used to be considered as a drawback because it is related to the decomposition and defunction of metal fluoride nanocrystals. Many strategies have been developed to stabilize the nanocrystals, and the equilibrium concentrations of fluoride are often <1 mM. Here we make good use of this minimum amount of fluoride and unveil that metal fluoride nanocrystals could effectively induce desilylation cleavage chemistry, enabling controlled release of fluorophores and drug molecules in test tubes, living cells, and tumor-bearing mice. Biocompatible PEG (polyethylene glycol)-coated CaF₂ nanocrystals have been prepared to assay the efficiency of desilylation-induced controlled release of functional molecules. We apply the strategy to a prodrug activation of monomethyl auristatin E (MMAE), showing a remarkable anticancer effect, while side effects are almost negligible. In conclusion, this desilylation-induced cleavage chemistry avails the drawback on empowering metal fluoride nanocrystals with a new function of perturbing or activating for further biological applications.

Lanthanide-Doped Near-Infrared Nanoparticles for Biophotonics

Light in the near-infrared (NIR) spectral region is increasingly utilized in bioapplications, providing deeper penetration in biological tissues owing to the lower absorption and scattering in comparison with light in the visible range. Lanthanide-doped luminescent nanoparticles with excitation and/or emission in the NIR range have recently attracted tremendous attention as one of the prime candidates for noninvasive biological applications due to their unique optical properties, such as large Stokes shift, spectrally sharp luminescence emissions, long luminescence lifetimes, and excellent photostability. Herein, recent advances of lanthanide-doped nanoparticles with NIR upconversion or downshifting luminescence and their uses in cutting-edge biophotonic applications are presented. A set of efficient strategies for overcoming the fundamental limit of low luminescence brightness of lanthanide-doped nanoparticles is introduced. An in-depth literature review of their state-of-art biophotonics applications is also included, showing their superiority for high-resolution imaging, single-nanoparticle-level detection, and efficacy for tissue-penetrating diagnostics and therapeutics.

Accurate In Vivo Nanothermometry through NIR-II Lanthanide Luminescence Lifetime

Luminescence nanothermometry is promising for noninvasive probing of temperature in biological microenvironment at nanometric spatial resolution. Yet, wavelength- and temperature-dependent absorption and scattering of tissues distort measured spectral profile, rendering conventional luminescence nanothermometers (ratiometric, intensity, band shape, or spectral shift) problematic for in vivo temperature determination. Here, a class of lanthanide-based nanothermometers, which are able to provide precise and reliable temperature readouts at varied tissue depths through NIR-II luminescence lifetime, are described. To achieve this, an inert core/active shell/inert shell structure of tiny nanoparticles (size, 13.5 nm) is devised, in which thermosensitive lanthanide pairs (ytterbium and neodymium) are spatially confined in the thin middle shell (sodium yttrium fluoride, 1 nm), ensuring being homogenously close to the surrounding environment while protected by the outmost calcium fluoride shell (CaF₂ , ≈2.5 nm) that shields out bioactive milieu interferences. This ternary structure enables the nanothermometers to consistently resolve temperature changes at depths of up to 4 mm in biological tissues, having a high relative temperature sensitivity of 1.4-1.1% °C^-1 in the physiological temperature range of 10-64 °C. These lifetime-based thermosensitive nanoprobes allow for in vivo diagnosis of murine inflammation, mapping out the precise temperature distribution profile of nanoprobes-interrogated area.

Bright Infrared-to-Ultraviolet/Visible Upconversion in Small Alkaline Earth-Based Nanoparticles with Biocompatible CaF2 Shells

Upconverting nanoparticles (UCNPs) are promising candidates for photon-driven reactions, including light-triggered drug delivery, photodynamic therapy, and photocatalysis. Herein, we investigate the NIR-to-UV/visible emission of sub-15 nm alkaline-earth rare-earth fluoride UCNPs (M1-x Lnx F2+x, MLnF) with a CaF2 shell. We synthesize 8 alkaline-earth host materials doped with Yb3+ and Tm3+ , with alkaline-earth (M) spanning Ca, Sr, and Ba, MgSr, CaSr, CaBa, SrBa, and CaSrBa. We explore UCNP composition, size, and lanthanide doping-dependent emission, focusing on upconversion quantum yield (UCQY) and UV emission. UCQY values of 2.46 % at 250 W cm-2 are achieved with 14.5 nm SrLuF@CaF2 particles, with 7.3 % of total emission in the UV. In 10.9 nm SrYbF:1 %Tm3+ @CaF2 particles, UV emission increased to 9.9 % with UCQY at 1.14 %. We demonstrate dye degradation under NIR illumination using SrYbF:1 %Tm3+ @CaF2 , highlighting the efficiency of these UCNPs and their ability to trigger photoprocesses.

Recent advances of lanthanide-doped upconversion nanoparticles for biological applications

Near infrared (NIR) excited lanthanide-doped upconversion nanoparticles (UCNPs) are emerging as a new type of fluorescent tag for biological applications, which can emit multi-photon ultraviolet, visible or NIR luminescence for imaging or activation of photosensitive molecules. Here, we present a comprehensive review on recent advances of UCNPs for a manifold of biological applications, including upconversion mechanisms, building bright multicolor upconversion nanocrystals, single nanoparticle and super resolution imaging, in vivo optical and multimodal imaging, photodynamic therapy, light-controlled drug release, biosensing, and toxicities. Our perspectives on the future development of UCNPs are also described.

Near-IR emissive rare-earth nanoparticles for guided surgery

Intraoperative image-guided surgery (IGS) has attracted extensive research interests in determination of tumor margins from surrounding normal tissues. Introduction of near infrared (NIR) fluorophores into IGS could significantly improve the in vivo imaging quality thus benefit IGS. Among the reported NIR fluorophores, rare-earth nanoparticles exhibit unparalleled advantages in disease theranostics by taking advantages such as large Stokes shift, sharp emission spectra, and high chemical/photochemical stability. The recent advances in elements doping and morphologies controlling endow the rare-earth nanoparticles with intriguing optical properties, including emission span to NIR-II region and long life-time photoluminescence. Particularly, NIR emissive rare earth nanoparticles hold advantages in reduction of light scattering, photon absorption and autofluorescence, largely improve the performance of nanoparticles in biological and pre-clinical applications. In this review, we systematically compared the benefits of RE nanoparticles with other NIR probes, and summarized the recent advances of NIR emissive RE nanoparticles in bioimaging, photodynamic therapy, drug delivery and NIR fluorescent IGS. The future challenges and promises of NIR emissive RE nanoparticles for IGS were also discussed.

Wireless near-infrared electrical stimulation of neurite outgrowth

Herein, through using electropolymerized pyrrole (PPy) to coat near-infrared upconversion nanoparticles (UCNPs) on an indium tin oxide (ITO) electrode, the as-prepared PPy/UCNPs photoelectrode could generate an interfacial electric field, release rare earth ions and induce reactive oxygen species (ROS) in PC12 cells under NIR irradiation, which could realize wireless neurite development and outgrowth.

Optically Robust and Biocompatible Mechanosensitive Upconverting Nanoparticles

Upconverting nanoparticles (UCNPs) are promising tools for background-free imaging and sensing. However, their usefulness for in vivo applications depends on their biocompatibility, which we define by their optical performance in biological environments and their toxicity in living organisms. For UCNPs with a ratiometric color response to mechanical stress, consistent emission intensity and color are desired for the particles under nonmechanical stimuli. Here, we test the biocompatibility and mechanosensitivity of α-NaYF4:Yb,Er@NaLuF4 nanoparticles. First, we ligand-strip these particles to render them dispersible in aqueous media. Then, we characterize their mechanosensitivity (∼30% in the red-to-green spectral ratio per GPa), which is nearly 3-fold greater than those coated in oleic acid. We next design a suite of ex vivo and in vivo tests to investigate their structural and optical properties under several biorelevant conditions: over time in various buffers types, as a function of pH, and in vivo along the digestive tract of Caenorhabditis elegans worms. Finally, to ensure that the particles do not perturb biological function in C. elegans, we assess the chronic toxicity of nanoparticle ingestion using a reproductive brood assay. In these ways, we determine that mechanosensitive UCNPs are biocompatible, i.e., optically robust and nontoxic, for use as in vivo sensors to study animal digestion.

Subfemtogram Simultaneous Elemental Detection in Multicomponent Nanomatrices Using Laser-Induced Plasma Emission Spectroscopy within Atmospheric Pressure Optical Traps

Simultaneous detection of multiple constituents in the characterization of state-of-the-art nanomaterials is an elusive topic to a majority of the analytical techniques covering the field of nanotechnology. Optical catapulting (OC) and optical trapping (OT) have recently been combined with laser-induced breakdown spectroscopy (LIBS) to provide single-nanoparticle resolution and attogram detection power. In the present work, the multielemental capabilities of this approach are demonstrated by subjecting two different types of nanometric ferrite particles to LIBS analysis. Up to three metallic elements in attogram quantities are consistently detected within single laser events. Individual excitation efficiency for each species is quantified from particle spectra showing an exponential correlation between photon production and the energy of the upper level of the monitored atomic line. Moreover, a new sampling strategy based in skimmer-like 3D printed cones that allows for thin dry nanoparticle aerosols to be formed via optical catapulting is introduced. Enhanced sampling resulted in an increase of the sampling throughput by facilitating stable atmospheric-pressure optical trapping of individual particles and spectroscopic chemical characterization within a short timeframe.

The Bioavailability, Biodistribution, and Toxic Effects of Silica-Coated Upconversion Nanoparticles in vivo

Lanthanide-doped upconversion nanoparticles can convert long wavelength excitation radiation to short wavelength emission. They have great potential in biomedical applications, such as bioimaging, biodetection, drug delivery, and theranostics. However, there is little information available on their bioavailability and biological effects after oral administration. In this study, we systematically investigated the bioavailability, biodistribution, and toxicity of silica-coated upconversion nanoparticles administrated by gavage. Our results demonstrate that these nanoparticles can permeate intestinal barrier and enter blood circulation by microstructure observation of Peyer's patch in the intestine. Comparing the bioavailability and the biodistribution of silica-coated upconversion nanoparticles with oral and intravenous administration routes, we found that the bioavailability and biodistribution are particularly dependent on the administration routes. After consecutive gavage for 14 days, the body weight, pathology, Zn and Cu level, serum biochemical analysis, oxidative stress, and inflammatory cytokines were studied to further evaluate the potential toxicity of the silica-coated upconversion nanoparticles. The results suggest that these nanoparticles do not show overt toxicity in mice even at a high dose of 100 mg/kg body weight.

Critical Considerations on the Clinical Translation of Upconversion Nanoparticles (UCNPs): Recommendations from the European Upconversion Network (COST Action CM1403)

The unique photoluminescent properties of upconversion nanoparticles (UCNPs) have attracted worldwide research interest and inspired many bioanalytical applications. The anti-Stokes emission with long luminescence lifetimes, narrow and multiple absorption and emission bands, and excellent photostability enable background-free and multiplexed detection in deep tissues. So far, however, in vitro and in vivo applications of UCNPs are restricted to the laboratory use due to safety concerns. Possible harmful effects may originate from the chemical composition but also from the small size of UCNPs. Potential end users must rely on well-founded safety data. Thus, a risk to benefit assessment of the envisioned combined therapeutic and diagnostic ("theranostic") applications is fundamentally important to bridge the translational gap between laboratory and clinics. The COST Action CM1403 "The European Upconversion Network-From the Design of Photon-Upconverting Nanomaterials to Biomedical Applications" integrates research on UCNPs ranging from fundamental materials synthesis and research, detection instrumentation, biofunctionalization, and bioassay development to toxicity testing. Such an interdisciplinary approach is necessary for a better and safer theranostic use of UCNPs. Here, the status of nanotoxicity research on UCNPs is compared to other nanomaterials, and routes for the translation of UCNPs into clinical applications are delineated.

NaYbF4@CaF2 core-satellite upconversion nanoparticles: one-pot synthesis and sensitive detection of glutathione

A new class of core-satellite upconversion nanoparticles (UCNPs) formed through a kinetically controlled oriented attachment is presented. The core-satellite UCNPs comprising an optically active α-NaYbF4 core and several CaF2 satellites are synthesized by a one-pot sequential injection technique. Compared to conventional core-shell UCNPs, these core-satellite UCNPs show larger surface-to-volume ratios and are suitable for further surface modifications. As a proof-of-concept, a biosensing system is constructed by coating MnO2 nanosheets on the α-NaYbF4:Tm@CaF2 core-satellite UCNPs for high-sensitivity biothiol detection. These core-satellite UCNPs show great potential in the development of UCNP-based nanohybrids for biosensing, multimodal imaging and drug delivery.

Rare-earth-doped fluoride nanoparticles with engineered long luminescence lifetime for time-gated in vivo optical imaging in the second biological window

Biomedicine is continuously demanding new luminescent materials to be used as optical probes for the acquisition of high resolution, high contrast and high penetration in vivo images. These materials, in combination with advanced techniques, could constitute the first step towards new diagnosis and therapy tools. In this work, we report on the synthesis of long lifetime rare-earth-doped fluoride nanoparticles by adopting different strategies: core/shell and dopant engineering. The here developed nanoparticles show intense infrared emission in the second biological window with a long luminescence lifetime close to 1 millisecond. These two properties make the here presented nanoparticles excellent candidates for time-gated infrared optical bioimaging. Indeed, their potential application as optical imaging contrast agents for autofluorescence-free in vivo small animal imaging has been demonstrated, allowing high contrast real-time tracking of gastrointestinal absorption of nanoparticles and transcranial imaging of intracerebrally injected nanoparticles in the murine brain.

Time-dependent luminescence loss for individual upconversion nanoparticles upon dilution in aqueous solution

Single-particle luminescence microscopy is a powerful method to extract information on biological systems that is not accessible by ensemble-level methods. Upconversion nanoparticles (UCNPs) are a particularly promising luminophore for single-particle microscopy as they provide stable, non-blinking luminescence and allow the avoidance of biological autofluorescence by their anti-Stokes emission. Recently, ensemble measurements of diluted aqueous dispersions of UCNPs have shown the instability of luminescence over time due to particle dissolution-related effects. This can be especially detrimental for single-particle experiments. However, this effect has never been estimated at the individual particle level. Here, the luminescence response of individual UCNPs under aqueous conditions is investigated by quantitative wide-field microscopy. The particles exhibit a rapid luminescence loss, accompanied by large changes in spectral response, leading to a considerable heterogeneity in their luminescence and band intensity ratio. Moreover, the dissolution-caused intensity loss is not correlated with the initial particle intensity or band ratio, which makes it virtually unpredictable. These effects and the subsequent development of their heterogeneity can be largely slowed down by adding millimolar concentrations of sodium fluoride in buffer. As a consequence, the presented data indicate that microscopy experiments employing UCNPs in an aqueous environment should be performed under conditions that carefully prevent these effects.

Shaping Luminescent Properties of Yb3+ and Ho3+ Co-Doped Upconverting Core-Shell β-NaYF4 Nanoparticles by Dopant Distribution and Spacing

At the core of luminescence color and lifetime tuning of rare earth doped upconverting nanoparticles (UCNPs), is the understanding of the impact of the particle architecture for commonly used sensitizer (S) and activator (A) ions. In this respect, a series of core@shell NaYF₄ UCNPs doped with Yb³⁺ and Ho³⁺ ions are presented here, where the same dopant concentrations are distributed in different particle architectures following the scheme: YbHo core and YbHo@…, …@YbHo, Yb@Ho, Ho@Yb, YbHo@Yb, and Yb@YbHo core-shell NPs. As revealed by quantitative steady-state and time-resolved luminescence studies, the relative spatial distribution of the A and S ions in the UCNPs and their protection from surface quenching has a critical impact on their luminescence characteristics. Although the increased amount of Yb³⁺ ions boosts UCNP performance by amplifying the absorption, the Yb³⁺ ions can also efficiently dissipate the energy stored in the material through energy migration to the surface, thereby reducing the overall energy transfer efficiency to the activator ions. The results provide yet another proof that UC phosphor chemistry combined with materials engineering through intentional core@shell structures may help to fine-tune the luminescence features of UCNPs for their specific future applications in biosensing, bioimaging, photovoltaics, and display technologies.

Unravelling the energy transfer of Er3+-self-sensitized upconversion in Er3+-Yb3+-Er3+ clustered core@shell nanoparticles

Unravelling upconversion (UC) energy transfer mechanisms is significant for designing novel efficient anti-Stokes phosphors. We have studied the correlation of different lanthanide dopants within Er³⁺-self-sensitized core@shell upconversion nanoparticles (UCNPs). Here, our focus will be on high-concentration dopants that are able to sufficiently produce the clustering effect, especially within the interplay between Er³⁺ and Yb³⁺. We demonstrate that whatever the amount of the self-sensitizer (e.g., Er³⁺), abnormal absorption enhancement will occur as long as Yb³⁺ clusters are present. This effect originates from the substantial energy transfer between Yb³⁺-Yb³⁺ clusters despite the increased energy transfer from Yb³⁺ to Er³⁺. Therefore, the energy transfer efficiency is still constrained. However, we conversely used one of the aforementioned quench-paths of UC energy transfer to easily transfer the energy from the in-shell shell layer to the in-core area with the assistance of the energy potential reservoir, which was given by the homogeneous core@shell band offset at the interface region. Indirectly, we actualize the Er³⁺ UC luminescence with self-sensitization through an extended energy transfer path. This work provides a solid support and analytic theory for unraveling the energy transfer mechanism from recent works on Er³⁺ self-sensitized UC luminescence.

NIR Ratiometric Luminescence Detection of pH Fluctuation in Living Cells with Hemicyanine Derivative-Assembled Upconversion Nanophosphors

It is crucial for cell physiology to keep the homeostasis of pH, and it is highly demanded yet challenging to develop luminescence resonance energy transfer (LRET)-based near-infrared (NIR) ratiometric luminescent sensor for the detection of pH fluctuation with NIR excitation. As promising energy donors for LRET, upconversion nanoparticles (UCNPs) have been widely used to fabricate nanosensors, but the relatively low LRET efficiency limits their application in bioassay. To improve the LRET efficiency, core/shell/shell structured β-NaGdF₄@NaYF₄:Yb,Tm@NaYF₄ UCNPs were prepared and decorated with hemicyanine dyes as an LRET-based NIR ratiometric luminescent pH fluctuation-nanosensor for the first time. The as-developed nanosensor not only exhibits good antidisturbance ability, but it also can reversibly sense pH and linearly sense pH in a range of 6.0-9.0 and 6.8-9.0 from absorption and upconversion emission spectra, respectively. In addition, the nanosensor displays low dark toxicity under physiological temperature, indicating good biocompatibility. Furthermore, live cell imaging results revealed that the sensor can selectively monitor pH fluctuation via ratiometric upconversion luminescence behavior.

Nd3+-Sensitized multicolor upconversion luminescence from a sandwiched core/shell/shell nanostructure

Lanthanide-doped upconversion nanoparticles (UCNPs) have attracted interest for use in bioimaging, biosensing, and therapeutic applications. These motivations are empowered by multicolor upconversion luminescence (UCL) under single near infrared wavelength excitation at ∼980 nm. However, this wavelength overlaps with the absorption peak of water that is dominant in the biological environment, eliciting a serious biological heating problem. This study reports tailored multicolor UCL from a Nd³⁺-sensitized sandwich-structure of core/shell/shell UCNPs of NaYbF₄:0.5%Tm,1%Nd@ CaF₂:30%Nd@CaF₂:1%Nd,20%Yb,2%Er that can be excited at single wavelength of ∼800 nm without producing any local heating. Incorporation of substantial Nd³⁺ sensitizers in the middle shell region allows efficient harvesting of excitation light, with the excitation then migrating bidirectionally across the core/shell interfaces to simultaneously activate blue emission from Tm in the core as well as green and red emission from Er in the outermost shell layer. By precise control of the content of lanthanide ions in each domain, a palette of multicolor UCL can be produced, ranging from blue to white. The described Nd³⁺-sensitized multicolor UCNPs hold promises for a variety of multiplexed biological applications, without complications from heating effects.

Bright X-ray and up-conversion nanophosphors annealed using encapsulated sintering agents for bioimaging applications

Nanophosphors are promising contrast agents for deep tissue optical imaging applications because they can be excited by X-ray and near infrared light that penetrates deeply through tissue and generates almost no autofluorescence background in the tissue. For these bioimaging applications, the nanophosophors should ideally be small, monodispersed and brightly luminescent. However, most methods used to improve luminescence yield by annealing the particles to reduce crystal and surface defects (e.g. using flux or sintering agents) also cause particle fusion or require multiple component core-shell structures. Here, we report a novel method to prepare bright, uniformly sized X-ray nanophosphors (Gd2O2S:Eu or Tb) and upconversion nanophosphors (Y2O2S: Yb/Er, or Yb/Tm) with large crystal domain size without causing aggregation. A core-shell nanoparticle is formed, with NaF only in the core. We observe that increasing the NaF sintering agent concentration up to 7.6 mol% increases both crystal domain size and luminescence intensity (up to 40% of commercial microphosphors) without affecting the physical particticle diameter. Above 7.6 mol%, particle fusion is observed. The annealing is insensitive to the cation (Na+ or K+) but varies strongly with anion, with F->Cl->CO32->Br->I-. The luminescence depends strongly on crystal domain size. The data agree reasonably well with a simple domain surface quenching model, although the size-dependence suggests additional quenching mechanisms within small domains. The prepared bright nanophosphors were subsequently functionalized with PEG-folic acid to target MCF-7 breast cancer cells which overexpress folic acid receptors. Both X-ray and upconversion nanophosphors provided low background and bright luminescence which was imaged through 1 cm chicken breast tissue at a low dose of nanophosphors 200 µL (0.1 mg/mL). We anticipate these highly monodispersed and bright X-ray and upconversion nanophosphors will have significant potential for tumor targeted imaging.

Energy Transfer Highway in Nd3+-Sensitized Nanoparticles for Efficient near-Infrared Bioimaging

Despite the large absorption cross-section of Nd³⁺ dopant as a sensitizer in lanthanide doped luminescence system, the strong cross-relaxation effect of it impedes the promotion of doping concentration and thus reduces the utilization of excitation light. In this work, we introduce a highly efficient acceptor, Yb³⁺ ion, which can quickly receive energy from Nd³⁺ ions, to construct an energy transfer highway for the enhancement of near-infrared emission. By using the energy transfer highway, the doping amount of Nd³⁺ ions in our NaYF₄:Yb,Nd@CaF₂ core/shell nanoparticles (CSNPs) can be markedly elevated to 60%. The quantum yield of CSNPs was determined to be 20.7%, which provides strong near-infrared luminescence for further bioimaging application. Remarkably, deep tissue penetration depth (∼10 mm) in in vitro imaging and high spatial resolution of blood vessel (∼0.19 mm) in in vivo imaging were detected clearly with weak autofluorescence, demonstrating that probes can be used as excellent NIR biosensors.

M2+ Doping Induced Simultaneous Phase/Size Control and Remarkable Enhanced Upconversion Luminescence of NaLnF4 Probes for Optical-Guided Tiny Tumor Diagnosis

Doping has played a vital role in constructing desirable hybrid materials with tunable functions and properties via incorporating atoms into host matrix. Herein, a simple strategy for simultaneously modifying the phase, size, and upconversion luminescence (UCL) properties of the NaLnF₄ (Ln = Y, Yb) nanocrystals by high-temperature coprecipitation through nonequivalent M²⁺ doping (M = Mg²⁺ , Co²⁺ ) has been demonstrated. The phase transformation from cubic to hexagonal is readily achieved by doping M²⁺ . Compared with Mg-free sample, a remarkable enhancement of overall UCL (≈27.5 times) is obtained by doping Mg²⁺ . Interestingly, owing to the efficient UCL, red UCL-guided tiny tumor (down to 3 mm) diagnosis is demonstrated for the first time. The results open up a new way of designing high efficient UCL probe with combination of hexagonal phase and small size for tiny tumor detection.

Ultralow-power near-infrared excited neodymium-doped nanoparticles for long-term in vivo bioimaging

Lanthanide-doped luminescent nanoparticles with both emission and excitation in the near-infrared (NIR-to-NIR) region hold great promise for bioimaging. Herein, core@shell structured LiLuF₄:Nd@LiLuF₄ (named as Nd@Lu) nanoparticles (NPs) with highly efficient NIR emission were developed for high-performance in vivo bioimaging. Strikingly, the absolute quantum yield of Nd@Lu NPs reached as high as 32%. After coating with polyethylene glycol (PEG), the water-dispersible Nd@Lu NPs showed good bio-compatibility and low toxicity. With efficient NIR emission, the Nd@Lu NPs were clearly detectable in tissues at depths of up to 20 mm. In addition, long-term in vivo biodistribution with a high signal-to-noise ratio of 25.1 was distinctly tracked upon an ultralow-power-density excitation (10 mW cm^-2) of 732 nm for the first time.