Synthesis and Characterization of Nanostructured Fe3O4Micron-Spheres and Their Application in Removing Toxic Cr Ions from Polluted Water

Cost-effective core@shell structured zero-valent iron nanoparticles @ magnetic (nZVI@Fe3O4) for Cr(vi) removal from aqueous solutions: preparation by disproportionation of Fe(ii)

Nanoscale zero-valent iron (nZVI) and its composites are known for their excellent ability to remove Cr(vi), but their preparation can be expensive due to the reduction processes. This study presents a cost-effective method to prepare core@shell structured nZVI@Fe3O4 nanocomposites using a novel Fe(ii) disproportionation reaction. The nZVI@Fe3O4 was thoroughly characterized using various techniques, including FESEM, HRTEM, EDS, XPS, XRD, FTIR, and VSM. Batch experiments were performed to evaluate the removal efficiency of nZVI@Fe3O4 in eliminating Cr(vi) ions from aqueous solutions, while classical models were employed to investigate the influencing factors associated with the removal process. The results showed that a 0.7 mg per ml NaOH solution reacted with Fe(ii) at 150 °C for 0.5 h could be used to prepare nZVI@Fe3O4 composites efficiently and inexpensively. nZVI@Fe3O4 was able to remove more than 99% of Cr(vi) from both simulated Cr(vi) solutions and real electroplating wastewater, and the recovery and preparation could be easily performed using external magnets to separate it from the solution. At pH 6.0, the maximum adsorption capacity (qmax) for Cr(vi) reached 58.67 mg g-1. The reaction mechanism was discussed from the perspective of electron transfer. Overall, the results suggest that nZVI@Fe3O4, an efficient adsorbent prepared using an environmentally friendly and inexpensive Fe(ii) disproportionation reaction, is a promising option for the treatment of Cr(vi) from industrial wastewater and other contaminated water sources.

Enhance antimony adsorption from aquatic environment by microwave-assisted prepared Fe3O4 nanospherolites

A novel hierarchically nanostructured magnetite (Fe3O4) was manufactured using microwave-assisted reflux method without surfactants. The nanostructured Fe3O4 is formed via the co-precipitation of Fe(III) and Fe(II), followed by a nanocrystal aggregation-based mechanism. Moreover, the effects of solution pH, contact time, initial Sb concentration, coexisting anions, and recycle numbers on the adsorption of nanostructured Fe3O4 toward Sb were extensively examined in the batch adsorption tests. The results demonstrated that the obtained Fe3O4 exhibited excellent adsorption ability toward Sb with the maximum adsorption capacities of 154.2 and 161.1 mg.g-1 for Sb(III) and Sb(V), respectively. The prepared Fe3O4 could be easily regenerated and reused for adsorption/desorption studies multiple times without compromising the Sb adsorption ability. Further exploration indicated that the oxidation or reduction reactions infrequently occurred during Sb adsorption processes. The proposed hierarchically nanostructured Fe3O4 thus could be potentially used for sustainable and efficient antimony removal.

Removal of Chromium Species by Adsorption: Fundamental Principles, Newly Developed Adsorbents and Future Perspectives

Emerging chromium (Cr) species have attracted increasing concern. A majority of Cr species, especially hexavalent chromium (Cr(VI)), could lead to lethal effects on human beings, animals, and aquatic lives even at low concentrations. One of the conventional water-treatment methodologies, adsorption, could remove these toxic Cr species efficiently. Additionally, adsorption possesses many advantages, such as being cost-saving, easy to implement, highly efficient and facile to design. Previous research has shown that the application of different adsorbents, such as carbon nanotubes (carbon nanotubes (CNTs) and graphene oxide (GO) and its derivatives), activated carbons (ACs), biochars (BCs), metal-based composites, polymers and others, is being used for Cr species removal from contaminated water and wastewater. The research progress and application of adsorption for Cr removal in recent years are reviewed, the mechanisms of adsorption are also discussed and the development trend of Cr treatment by adsorption is proposed.

Controlling the morphology of metal–organic frameworks and porous carbon materials: metal oxides as primary architecture-directing agents

We give a comprehensive overview of how the morphology control is an effective and versatile way to control the physicochemical properties of metal oxides that can be transferred to metal–organic frameworks and porous carbon materials.

Facile preparation of amidoxime-functionalized Fe3O4@SiO2-g-PAMAM-AO magnetic composites for enhanced adsorption of Pb(ii) and Ni(ii) from aqueous solution

In this paper, using amidoxime as a functional monomer, different generations of polyamidoxime dendrimer magnetic microspheres (Fe₃O₄@SiO₂-g-PAMAM-AO) were fabricated to adsorb Pb²⁺ and Ni²⁺ in aqueous solution. The magnetic adsorbents were characterized by FTIR, XRD, SEM, XPS, TEM, EDS, TGA and BET. The effects of different factors (such as solution pH, adsorption time, adsorption temperature, adsorbent dosage etc.) on adsorption were evaluated. Fe₃O₄@SiO₂-g-PAMAM-AO has a maximum Pb(ii) adsorption of 157.25 mg g⁻¹ (100 mg L⁻¹) at pH 5.5. Furthermore, Fe₃O₄@SiO₂-g-PAMAM-AO showed an excellent adsorption performance for the removal of Ni(ii) with a maximum adsorption capacity of 191.78 mg g⁻¹ (100 mg L⁻¹) at pH 8.0. The sorption isotherm data fitted the Freundlich isotherm model well. Adsorption kinetics analysis showed that it was best described by the pseudo-second-order rate model. Desorption experiment results showed that the adsorbent can be reused in the adsorption–desorption cycles.

In this paper, using amidoxime as a functional monomer, different generations of polyamidoxime dendrimer magnetic microspheres (Fe₃O₄@SiO₂-g-PAMAM-AO) were fabricated to adsorb Pb²⁺ and Ni²⁺ in aqueous solution.

Self-Template Etching Synthesis of Urchin-Like Fe3O4 Microspheres for Enhanced Heavy Metal Ions Removal

Hierachical Fe₃O₄ microspheres with superparamagnetic properties are attractive for their superior structural, water-dispersible, and magnetic separation merits. Here self-template etching route was developed to create optimal porous structure in superparamagnetic Fe₃O₄ microspheres by using the oxalic acid (H₂C₂O₄) as etching agent. A plausible formation mechanism of the urchin-like Fe₃O₄ microspheres was proposed based on systematic investigation of the etching process, which involved two stages including pore-forming step based on size-selective etching and pore-expanding step based on further etching. The as-synthesized Fe₃O₄ microspheres exhibited urchin-like structure with specific surface area and pore-size tunable, water-dispersible, and superparamagnetic properties. The optimal urchin-like Fe₃O₄ microspheres demonstrated superior performance including fast magnetic separation and high removal capabilities for the heavy metals ions like Pb²⁺ (112.8 mg g^-1) and Cr(VI) (68.7 mg g^-1). This work will shed new light on the synthesis of urchin-like microspheres for superior performance.

Preparation and application synthesis of magnetic nanocomposite using waste toner for the removal of Cr(vi)

In this study, a novel magnetic nanocomposite was prepared using waste toner (WT) through high temperature decomposition, and calcination was conducted in different atmospheres (air, ammonia, and vacuum). WT calcined in ammonia (WT(NH₃)), and it was then utilized as an efficient absorbent for the reduction of Cr(vi) in aqueous solutions; a batch experiment with different conditions was performed to investigate its Cr(vi) removal ability. The effects of two pH-regulating acid (HCl and H₂SO₄) treatments were also studied. It was found that WT(NH₃) could remove about 99% Cr(vi) at pH 2 under H₂SO₄ treatment. The XRD and TEM results coupled with VSM results confirmed that WT(NH₃) is an Fe₃O₄/Fe₂N nanohybrid, which possesses excellent water-dispersibility and remarkable magnetic properties. XPS analysis showed the presence of Cr(vi) and Cr(iii) on the surface of WT(NH₃), which indicated that Cr(vi) was reduced to Cr(iii). Furthermore, H₂SO₄ regulation also promoted the reduction of Cr(vi) by WT(NH₃), and this reduction was higher than that obtained by HCl regulation.

A novel magnetic nanocomposite is prepared using waste toner via calcination in ammonia, which exhibits excellent magnetic properties and high efficiency for the removal of Cr(vi) via pH regulation using H₂SO₄.

Solution-phase synthesis of transition metal oxide nanocrystals: Morphologies, formulae, and mechanisms

In this review, we provide a broad overview of solution-phase synthesis of transition metal oxide nanocrystals (NCs), including a substantial catalog of published methods, and a unifying classification and discussion. Prevalent subcategories of solution-phase synthesis are delineated and general features are summarized. The diverse morphologies achievable by solution-phase synthesis are defined and exemplified. This is followed by sequential consideration of the solution-phase synthesis of first-row transition metal oxides. The common oxides of Ti, V, Mn, Fe, Co, Ni, Cu, and Zn are introduced; major crystal lattices are presented and illustrated; representative examples are explained; and numerous synthesis formulae are tabulated. Following this presentation of experimental studies, we present an introduction to theories of NC nucleation and growth. Various models of NC nucleation and growth are addressed, and important concepts determining the growth and structure of colloidal NCs are explained. Overall, this review provides an entry into systematic understanding of solution-phase synthesis of nanocrystals, with a reasonably comprehensive survey of results for the important category of transition metal oxide NCs.

Synthesis of a core–shell magnetic Fe3O4–NH2@PmPD nanocomposite for efficient removal of Cr(vi) from aqueous media

The magnetic Fe₃O₄–NH₂@PmPD composites show outstanding Cr(vi) removal performance due to the abundant nitrogen-containing functional groups.

An adsorption–reduction synergistic effect of mesoporous Fe/SiO2–NH2 hollow spheres for the removal of Cr(vi) ions

Mesoporous Fe/SiO₂–NH₂ hollow spheres were successfully prepared as a magnetic absorbent for the highly effective removal of Cr(vi) ions through an adsorption–reduction synergistic effect.

Modified natural diatomite and its enhanced immobilization of lead, copper and cadmium in simulated contaminated soils

Natural diatomite was modified through facile acid treatment and ultrasonication, which increased its electronegativity, and the pore volume and surface area achieved to 0.211 cm(3) g(-1) and 76.9 m(2) g(-1), respectively. Modified diatomite was investigated to immobilize the potential toxic elements (PTEs) of Pb, Cu and Cd in simulated contaminated soil comparing to natural diatomite. When incubated with contaminated soils at rates of 2.5% and 5.0% by weight for 90 days, modified diatomite was more effective in immobilizing Pb, Cu and Cd than natural diatomite. After treated with 5.0% modified diatomite for 90 days, the contaminated soils showed 69.7%, 49.7% and 23.7% reductions in Pb, Cu and Cd concentrations after 0.01 M CaCl2 extraction, respectively. The concentrations of Pb, Cu and Cd were reduced by 66.7%, 47.2% and 33.1% in the leaching procedure, respectively. The surface complexation played an important role in the immobilization of PTEs in soils. The decreased extractable metal content of soil was accompanied by improved microbial activity which significantly increased (P<0.05) in 5.0% modified diatomite-amended soils. These results suggested that modified diatomite with micro/nanostructured characteristics increased the immobilization of PTEs in contaminated soil and had great potential as green and low-cost amendments.

Synthesis of Core-Shell Magnetic Fe3O4@poly(m-Phenylenediamine) Particles for Chromium Reduction and Adsorption

Magnetic Fe3O4@poly(m-phenylenediamine) particles (Fe3O4@PmPDs) with well-defined core-shell structure were first designed for high performance Cr(VI) removal by taking advantages of the easy separation property of magnetic nanoparticles (MNPs) and the satisfactory adsorption property of polymers. Through controlling the polymerization on MNPs, directly coating was realized without the complicated premodification procedures. The particle property and adsorption mechanism were analyzed in details. Fe3O4@PmPDs exhibited tunable PmPD shell thickness from 10 to 100 nm, high magnetic (∼150 to ∼73 emu g(-1)) and facile separation property by magnet. The coating of PmPD significantly enhanced Cr(VI) adsorption capacity from 46.79 (bare MNPs) to 246.09 mg g(-1) (71.55% PmPD loading proportion), much higher than many reported composite adsorbents. The high Cr(VI) removal performance was attributed to the adsorption of Cr(VI) on protonated imino groups and the efficient reduction of Cr(VI) to Cr(III) by amine, followed by Cr(III) chelated on imino groups, which are spontaneous and endothermic. The Fe3O4@PmPDs have great potential in treating Cr(VI)-contaminated water.

One pot microwave-assisted synthesis of Ag decorated yolk@shell structured TiO2 microspheres

A facile and extremely fast one-pot microwave-assisted synthesis of Ag decorated yolk@shell structured TiO₂ microspheres was reported.

Graphene oxide coated coordination polymer nanobelt composite material: a new type of visible light active and highly efficient photocatalyst for Cr(vi) reduction

GO/CPNB was fabricated successfully, which displays excellent photocatalytic activity in visible light. Furthermore, the influence of GO on photocatalytic activity is discussed.

Microwave-assisted preparation of sepiolite-supported magnetite nanoparticles and their ability to remove low concentrations of Cr(vi)

A sepiolite–nanomagnetite composite obtained by a facile microwave-assisted route can not only remove low concentrations of Cr(vi), but also effectively immobilize the secondary Fe³⁺in the final solution.

Amino-functionalized magnetic magnesium silicate double-shelled hollow microspheres for enhanced removal of lead ions

Both iron magnetic core and amino-group were put forward to functionalize the magnesium silicate hollow microspheres for a fast recoverable and high efficient absorbent of lead ions.

The template-assisted synthesis of polypyrrole hollow microspheres with a double-shelled structure

Double-shelled polypyrrole hollow microspheres were synthesized via a novel template-assisted concept, using iron oxide hollow microspheres as both the sacrificial template and initiator in acidic solution.

Enhanced photocatalytic activity of hierarchical structure TiO2 hollow spheres with reactive (001) facets for the removal of toxic heavy metal Cr(vi)

TiO₂ hollow spheres composed of reactive (001) facets were synthesized, and their enhanced Cr(vi) removal activity was demonstrated.

Controllable synthesis of hierarchical porous Fe3O4 particles mediated by poly(diallyldimethylammonium chloride) and their application in arsenic removal

Hierarchical porous Fe3O4 particles with tunable grain size were synthesized based on a facile poly (diallyldimethylammonium chloride) (PDDA)-modulated solvothermal method. The products were characterized with scanning electron microscopy (SEM) and transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), N2 adsorption-desorption technique, vibrating sample magnetometer (VSM), and dynamic light scattering (DLS). The results show that increasing the PDDA dosage decrease the grain size and particle size, which increased the particle porosity and enhanced the surface area from 7.05 to 32.75 m(2) g(-1). Possible mechanism can be ascribed to the PDDA function on capping the crystal surface and promoting the viscosity of reaction medium to mediate the growth and assembly of grain. Furthermore, the arsenic adsorption application of the as-obtained Fe3O4 samples was investigated and the adsorption mechanism was proposed. High magnetic Fe3O4 particles with increased surface area display improved arsenic adsorption performance, superior efficiency in low-level arsenic removal, high desorption efficiency, and satisfactory magnetic recyclability, which are very promising compared with commercial Fe3O4 particles.