Reusable and inductively regenerable magnetic activated carbon for removal of organic micropollutants from secondary wastewater effluents

This work introduces a new sustainable alternative of powdered activated carbon (PAC) - magnetically harvestable and reusable after regeneration via inductive heating - for the adsorptive removal of organic micropollutants (OMP) from secondary wastewater effluents. For this purpose, two commercial PACs - lignite "L" (1187 m2/g) and coconut "C"-based (1524 m2/g) - were modified with magnetic iron oxide following two different synthesis approaches: infiltration ("infiltr") and surface deposition ("depos") route. The resulting magnetic powdered activated carbons (mPAC) and their precursor PACs were fully characterized before application. The iron oxide content of the modified "L" and "C" samples was ∼30 % and ∼20 %, respectively. Iron oxide gives the PAC beneficial magnetic properties for easy magnetic separation and simultaneously acts as an inductively heatable agent for the carbon regeneration. The infiltrated samples displayed better inductive heating performance and regeneration than their deposited counterparts. Tests with real wastewater showed fast adsorption kinetics of the organic load following the pseudo-second-order kinetic model. Adsorption isotherms were compliant with the Freundlich isotherm model. Sample "L-infiltr" had the best overall adsorption performance throughout 5 reuse cycles when intermediately inductively regenerated (<3 % drop in organics removal per cycle with intermediate regeneration vs. ∼10 % drop per cycle without regeneration). The treated supernatant was additionally tested for 31 representative organic micropollutants and their transformation products (pharmaceuticals, personal care products, industrial chemicals, etc.), where 26 OMPs had consistently high removal (>85 %) throughout 5 cycles with intermediate regeneration and for 28 OMPs the total adsorption efficiency dropped by <5 % after 5 cycles.

Comparative analysis of the equilibrium, kinetics, and characterization of the mechanism of rapid adsorption of Congo red on nano-biosorbents based on agricultural waste in industrial effluents

This study aims to remove Congo red dye from industrial effluent using economical agriculturally-based nano-biosorbents like magnetic orange peel, peanut shells, and tea waste. The nano-biosorbents were characterized by various analytical techniques like SEM, FT-IR, BET and XRD. The highest adsorption capacity was obtained under the following ideal conditions: pH = 6 (orange peel and peanut shells), pH = 3 (tea waste), and dosages of nano-biosorbents with varying timeframes of 50 min for tea waste and peanut shells and 30 min for orange peel. The study found that tea waste had the highest removal rate of 94% due to its high porosity and responsible functional groups, followed by peanut shells at 83% and orange peel at 68%. The Langmuir isotherm model was found to be the most suitable, with R2 values of 0.99 for tea waste, 0.92 for orange peel, and 0.71 for peanut shells. On the other hand, a pseudo-second-order kinetic model was very feasible, showing an R2 value of 0.99 for tea waste, 0.98 for peanut shells and 0.97 for orange peel. The significance of the current study lies in its practical application, enabling efficient waste management and water purification, thereby preserving a clean and safe environment.

Magnetite alleviating calcification of anaerobic granular sludge (AnGS): Electron transfer enhancement and ion competition

Calcification accompanied by deactivation of anaerobic granular sludge (AnGS) is a continuing challenge for high calcium wastewater treatment. The interaction between Ca2+ and extracellular polymeric substances (EPS) is a precondition for this problem. In this study, magnetite for activity recovery and calcification alleviation simultaneously of AnGS under high calcium stress was investigated. The results showed that, in the presence of magnetite, the relative biogas production increased by 13.2 % with the higher activities of key enzymes involved in methanogenesis. Methanosarcina turned into the dominant methanogens, and syntrophic bacteria such as Chloroflexi, Synergistota were enriched, which indicated the enhancement of electron transfer by magnetite, supported by an 18 % increase of the electron transfer system (ETS) activity. Further characterizations of AnGS suggested that the granule calcification was alleviated with a final decrease of 13-40 % calcium content of AnGS with particle size of 1-2.5 mm. Besides, calcium was partially substituted by iron in the EPS, and the secretion of EPS especially proteins decreased. Batch tests demonstrated the competition between Fe2+ dissolved from magnetite and Ca2+, which interfered the interaction between Ca2+ and EPS, so the granule calcification was prevented. Therefore, magnetite played a pluripotent role in the alleviation of granule calcification and deactivation in situ via (1) enhancing electron transfer, and (2) blocking the complex between Ca2+ and EPS. This study provides a novel insight into the application of conductive metal materials in biological wastewater treatment systems suffering from high calcium attack.

strain C1

The efficiency of the Fenton reaction is markedly contingent upon the operational pH related to iron solubility. Therefore, a heterogeneous Fenton reaction has been developed to function at neutral pH. In the present study, the Bio-Fenton reaction was carried out using magnetite (Fe(II)Fe(III)2O4) and H2O2 generated by a newly isolated H2O2-producing bacterium, Desemzia sp. strain C1 at pH 6.8 to degrade chloroacetanilide herbicides. The optimal conditions for an efficient Bio-Fenton reaction were 10 mM of lactate, 0.5% (w/v) of magnetite, and resting-cells (O.D.600 = 1) of strain C1. During the Bio-Fenton reaction, 1.8-2.0 mM of H2O2 was generated by strain C1 and promptly consumed by the Fenton reaction with magnetite, maintaining stable pH conditions. Approximately, 40-50% of the herbicides underwent oxidation through non-specific reactions of •OH, leading to dealkylation, dechlorination, and hydroxylation via hydrogen atom abstraction. These findings will contribute to advancing the Bio-Fenton system for non-specific oxidative degradation of diverse organic pollutants under in-situ environmental conditions with bacteria producing high amount of H2O2 and magnetite under a neutral pH condition.

Insights into feasibility and microbial characterizations on simultaneous elimination of dissolved methane from anaerobic effluents and nitrate/nitrite reduction in a conventional anoxic reactor with magnetite

Discovery of nitrate/nitrite-dependent anaerobic methane oxidation (DAMO) challenges the conventional biological treatment processes, since it provides a possibility of simultaneously mitigating dissolved methane emissions from anaerobic effluents and reducing additional carbon sources for denitrification. Due to the slow growth of specialized DAMO microbes, this possibility has been just practiced with biofilms in membrane biofilm reactors or granular sludge in membrane bioreactors. In this study, simultaneous elimination of dissolved methane from anaerobic effluents and nitrate/nitrite reduction was achieved in a conventional anoxic reactor with magnetite. Calculations of electron flow balance showed that, with magnetite the eliminated dissolved methane was almost entirely used for nitrate/nitrite reduction, while without magnetite approximately 52 % of eliminated dissolved methane was converted to unknown organics. Metagenomic sequencing showed that, when dissolved methane served as an electron donor, the abundance of genes for reverse methanogenesis and denitrification dramatically increased, indicating that anaerobic oxidation of methane (AOM) coupled to nitrate/nitrite reduction occurred. Magnetite increased the abundance of genes encoding the key enzymes involved in whole reverse methanogenesis and Nir and Nor involved in denitrification, compared to that without magnetite. Analysis of microbial communities showed that, AOM coupled to nitrate/nitrite reduction was proceeded by syntrophic consortia comprised of methane oxidizers, Methanolinea and Methanobacterium, and nitrate/nitrite reducers, Armatimonadetes_gp5 and Thauera. With magnetite syntrophic consortia exchanged electrons more effectively than that without magnetite, further supporting the microbial growth.

The magneto-microbiome: A dataset of the metagenomic distribution of magnetotactic bacteria

Magnetotactic bacteria (MTB) are diverse prokaryotes characterized by their ability to generate biogenic magnetic iron crystals. MTB are ubiquitous across aquatic environments, and growing evidence has indicated they may be present in association with animal microbiomes. Unfortunately, they are difficult to culture in vitro and more studies understanding their biogeographical distribution and ecological roles are needed. To provide data regarding the patterns of diversity and distribution of MTB, we screened the entire Sequence Read Archive (SRA) from the National Center for Biotechnology Information for DNA sequencing reads matching known MTB taxa. The dataset summarizes the count of reads assigned to MTB from more than 26 million SRA accessions comprising approximately 80 petabases (7.98 × 1016) of DNA. More than 396 million DNA sequencing reads were assigned to 214 MTB taxa in 691,086 (2.65 %) SRA accessions. The final dataset can be utilized by researchers to narrow their efforts in examination of both environmental and ecological roles of specific MTB or to identify potential host organisms. These data will be instrumental to further elucidating the importance and utility of these enigmatic bacteria.

Enhancement of electron transfer via magnetite in nitrite-dependent anaerobic methane oxidation system

Nitrite-dependent anaerobic methane oxidation (n-DAMO) is a novel denitrification process that simultaneously further removes and utilizes methane from anaerobic effluent from wastewater treatment plants. However, the metabolic activity of n-DAMO bacteria is relative low for practical application. In this study, conductive magnetite was added into lab-scale sequencing batch reactor inoculated with n-DAMO bacteria to study the influence on n-DAMO process. With magnetite amendment, the nitrogen removal rate could reach 34.9 mg N·L-1d-1, nearly 2.5 times more than that of control group. Magnetite significantly facilitated the interspecies electron transfer and built electrically connected community with high capacitance. Enzymatic activities of electron transport chain were significantly elevated. Functional gene expression and enzyme activities associated with nitrogen and methane metabolism had been highly up-regulated. These results not only propose a useful strategy in n-DAMO application but also provide insights into the stimulating mechanism of magnetite in n-DAMO process.

Non-invasive methods of monitoring Fe3O4 magnetic nanoparticle toxicity in human liver HepaRG cells using impedance biosensing and Coherent anti-Stokes Raman spectroscopic (CARS) microscopy

Functionalized nanoparticles have been developed for use in nanomedicines for treating life threatening diseases including various cancers. To ensure safe use of these new nanoscale reagents, various assays for biocompatibility or cytotoxicity in vitro using cell lines often serve as preliminary assessments prior to in vivo animal testing. However, many of these assays were designed for soluble, colourless materials and may not be suitable for coloured, non-transparent nanoparticles. Moreover, cell lines are not always representative of mammalian organs in vivo. In this work, we use non-invasive impedance sensing methods with organotypic human liver HepaRG cells as a model to test the toxicity of PEG-Fe3O4 magnetic nanoparticles. We also use Coherent anti-Stokes Raman Spectroscopic (CARS) microscopy to monitor the formation of lipid droplets as a parameter to the adverse effect on the HepaRG cell model. The results were also compared with two commercial testing kits (PrestoBlue and ATP) for cytotoxicity. The results suggested that the HepaRG cell model can be a more realistic model than commercial cell lines while use of impedance monitoring of Fe3O4 nanoparticles circumventing the uncertainties due to colour assays. These methods can play important roles for scientists driving towards the 3Rs principle - Replacement, Reduction and Refinement.

Dual-functional heterogeneous Fenton catalyst Cu/Ti co-doped Fe3O4@FeOOH for cyanide-containing wastewater treatment: Preparation, performance and mechanism

The dual-functional heterogeneous Fenton catalyst Cu/Ti co-doped iron-based Fenton catalyst (Cu/Ti -Fe3O4@FeOOH, FCT) were successfully prepared by precipitation oxidation method and characterized by XRD, XPS and XAFS. The prepared Cu/Ti co-doped Fe3O4@FeOOH nanoparticles consisted of goethite nanorods and magnetite rod octahedral particles, with Cu and Ti replacing Fe in the catalyst crystal structure, leading to the formation of the goethite structure. The heterogeneous Fenton catalyst FCT exhibited excellent degradation activity for cyanide in wastewater and showed different reaction mechanisms at varying pH levels. When treating 100 mL of 12 mg L-1 NaCN solution, complete degradation occurred within 40 min at 30 °C and pH ranging from 6.5 to 12.5 without external energy. Compared to Fe3O4, FCT shows superior degradation activity for cyanide. The surface Cu(Ⅰ) facilitated the electron transfer and significantly improved the catalytic activity of the catalyst. Additionally, the magnetic properties of the Ti-doped catalyst samples were greatly enhanced compared to the Cu@FeOOH catalyst doped with Cu, making them favorable for recycling and reuse. FCT maintains 100% degradation of cyanogen after three cycles, indicating its excellent stability. Furthermore, electron spin resonance spectroscopy, free radical quenching experiments and fluorescence probe techniques using terephthalic acid (TA) and benzoic acid (BA) confirmed that the presence of •OH and FeⅣ=O reactive species was responsible for the catalysts exhibiting different mechanisms at different pH conditions. Compared with other heterogeneous Fenton catalysts, FCT exhibits intentional degradation activity for cyanide-containing wastewater under different acid-base conditions, which greatly broadened the pH range of the heterogeneous Fenton reaction.

Structural Fe(II)-induced generation of reactive oxygen species on magnetite surface for aqueous As(III) oxidation during oxygen activation

Magnetite is a reductive Fe(II)-bearing mineral, and its reduction property is considered important for degradation of contaminants in groundwater and anaerobic subsurface environments. However, the redox condition of subsurface environments frequently changes from anaerobic to aerobic owing to natural and anthropogenic disturbances, generating reactive oxygen species (ROS) from the interaction between Fe(II)-bearing minerals and O2. Despite this, the mechanism of ROS generation induced by magnetite under aerobic conditions is poorly understood, which may play a crucial role in As(III) oxidation. Herein, we found that magnetite could activate O2 and induce the oxidative transformation of As(III) under aerobic conditions. As(III) oxidation was attributed to the ROS generated via structural Fe(II) within the magnetite octahedra oxygenation. The electron paramagnetic resonance and quenching tests confirmed that O2•-, H2O2, and •OH were produced by magnetite. Moreover, density function theory calculations combined with experiments demonstrated that O2•- was initially formed via single electron transfer from the structural Fe(II) to the adsorbed O2; O2•- was then converted to •OH and H2O2 via a series of free radical reactions. Among them, O2•-and H2O2 were the primary ROS responsible for As(III) oxidation, accounting for approximately 52 % and 19 % of As(III) oxidation. Notably, As(III) oxidation mainly occurred on the magnetite surface, and As was immobilized further within the magnetite structure. This study provides solid evidence regarding the role of magnetite in determining the fate and transformation of As in redox-fluctuating subsurface environments.

Synergistic corrosion effects of magnetite and microorganisms: microbial community dependency

The synergistic corrosion effect of acid-producing bacteria (APB) and magnetite on carbon steel corrosion was assessed using two different microbial consortia. A synergistic corrosion effect was observed exclusively with Consortium 2, which was composed of Enterobacter sp., Pseudomonas sp., and Tepidibacillus sp. When Consortium 2 was accompanied by magnetite, uniform corrosion and pitting rates were one-time higher (0.094 mm/year and 0.777 mm/year, respectively) than the sum of the individual corrosion rates promoted by the consortium and deposit separately (0.084 and 0.648 mm/year, respectively). The synergistic corrosion effect observed exclusively with Consortium 2 is attributed to its microbial community structure. Consortium 2 exhibited higher microbial diversity that benefited the metabolic status of the community. Although both consortia induced acidification of the test solution and metal surface through glucose fermentation, heightened activity levels of Consortium 2, along with increased surface roughness caused by magnetite, contributed to the distinct synergistic corrosion effect observed with Consortium 2 and magnetite. KEY POINTS: • APB and magnetite have a synergistic corrosion effect on carbon steel. • The microbial composition of APB consortia drives the synergistic corrosion effect. • Magnetite increases carbon steel surface roughness.

Efficient sorption of As(III) from water by magnetite decorated porous carbon extracted from a biowaste material

Arsenic is a highly toxic metal that causes cancer even at a low concentration and its removal from water resources is challenging. Herein, carbon extracted from waste onion bulbs is activated to cater for porosity and functionalized with magnetite (Fe3O4) nanoparticles (named MCK6) to address the challenge of As(III) removal. Synthesized MCK6 was highly mesoporous having a surface area of 208 m2/g, where magnetite nanoparticles (≤ 10 nm) are homogeneously distributed within a porous network. The developed adsorbent inherited functional groups from the biosource and magnetic property from magnetite making it ideal for removal of As(III). Further, MCK6 showed a maximum monolayer adsorption capacity (qm) of 10.2 mg/g at 298 K and pH 7. The adsorption thermodynamics delineates a non-spontaneous and endothermic reaction, where the kinetics followed pseudo 2nd order (R2 value of 0.977), while monolayer formation is explained by the Langmuir model. Moreover, MCK6 efficiently works to remove As(III) in a competitive metal ions system including Pb+2, Cd+2, and Ca+2, making it a suitable adsorbent to tackle contaminated water.

Neurodegenerative effects of air pollutant Particles: Biological mechanisms implicated for Early-Onset Alzheimer's disease

BACKGROUND

Sporadic Alzheimer's disease (AD) occurs in 99% of all cases and can be influenced by air pollution such as diesel emissions and more recently, an iron oxide particle, magnetite, detected in the brains of AD patients. However, a mechanistic link between air pollutants and AD development remains elusive.

AIM

To study the development of AD-relevant pathological effects induced by air pollutant particle exposures and their mechanistic links, in wild-type and AD-predisposed models.

METHODS

C57BL/6 (n = 37) and APP/PS1 transgenic (n = 38) mice (age 13 weeks) were exposed to model pollutant iron-based particle (Fe0-Fe3O4, dTEM = 493 ± 133 nm), hydrocarbon-based diesel combustion particle (43 ± 9 nm) and magnetite (Fe3O4, 153 ± 43 nm) particles (66 µg/20 µL/third day) for 4 months, and were assessed for behavioural changes, neuronal cell loss, amyloid-beta (Aβ) plaque, immune response and oxidative stress-biomarkers. Neuroblastoma SHSY5Y (differentiated) cells were exposed to the particles (100 μg/ml) for 24 h, with assessments on immune response biomarkers and reactive oxygen species generation.

RESULTS

Pollutant particle-exposure led to increased anxiety and stress levels in wild-type mice and short-term memory impairment in AD-prone mice. Neuronal cell loss was shown in the hippocampal and somatosensory cortex, with increased detection of Aβ plaque, the latter only in the AD-predisposed mice, with the wild-type not genetically disposed to form the plaque. The particle exposures however, increased AD-relevant immune system responses, including inflammation, in both strains of mice. Exposures also stimulated oxidative stress, although only observed in wild-type mice. The in vitro studies complemented the immune response and oxidative stress observations.

CONCLUSIONS

This study provides insights into the mechanistic links between inflammation and oxidative stress to pollutant particle-induced AD pathologies, with magnetite apparently inducing the most pathological effects. No exacerbation of the effects was observed in the AD-predisposed model when compared to the wild-type, indicating a particle-induced neurodegeneration that is independent of disease state.

Effective degradation of tetracycline and real pharmaceutical wastewater using novel nanocomposites of biosynthesized ZnO and carbonized toner powder

In this study, novel nanohybrids of biosynthesized zinc oxide (ZnO) and magnetite-nanocarbon (Fe3O4-NC) obtained from the carbonization of toner powder waste were fabricated and investigated for persulfate (PS) activation for the efficient degradation of tetracycline (TCN). The chemical and physical properties of the synthesized catalysts were analyzed using advanced techniques. ZnO/Fe3O4-NC nanohybrid with mass ratio 1:2, respectively in the presence of PS showed the highest TCN removal efficiency compared to the individual components (ZnO and Fe3O4-NC) and other nanohybrids with mass ratios of 1:1 and 2:1. The results indicated that efficient degradation of TCN could be attained at pH 3-7. The optimum operating parameters were TCN concentration of 12.8 mg/L, PS concentration of 7 Mm, and catalyst dose of 0.55 g/L. The high stability of ZnO/Fe3O4-NC (1:2) nanocomposite was assured by the slight drop in TCN degradation percentage from 97.27% to 85.45% after five successive runs under the optimum conditions and the concentrations of leached iron and zinc into the solution were monitored. The quenching experiments explored that the prevailing reactive entities were sulfate radicals. Additionally, the degradation of TCN in various water matrices was investigated, and a degradation pathway was suggested. Further, degradation of real pharmaceutical waste was conducted showing that the removal efficiencies of TCN, total organic carbon (TOC), and chemical oxygen demand (COD) were 89.79, 80.65, and 78.64% after 2 h under the optimum conditions. The effectiveness of the proposed system (ZnO/Fe3O4-NC (1:2) @ PS) for the degradation of real samples compiled from industrial effluents as well as its inexpensiveness and green nature qualify this system for the full-scale application.

The effect of temperature on the synthesis of magnetite nanoparticles by the coprecipitation method

Magnetic nanoparticles, such as magnetite (Fe3O4), exhibit superparamagnetic properties below 15 nm at room temperature. They are being explored for medical applications, and the coprecipitation technique is preferred for cost-effective production. This study investigates the impact of synthesis temperature on the nanoparticles' physicochemical characteristics. Two types of magnetic analysis were conducted. Samples T 40, T 50, and T 60 displayed superparamagnetic behavior, as evidenced by the magnetization curves. The experiments verified the development of magnetic nanoparticles with an average diameter of approximately dozens of nanometers, as determined by various measurement methods such as XDR, Raman, and TEM. Raman spectroscopy showed the characteristic bands of the magnetite phase at 319, 364, 499, and 680 cm-1. This was confirmed in the second analysis with the ZFC-FC curves, which showed that the samples' blocking temperatures were below ambient temperature. ZFC-FC curves revealed a similar magnetization of about 30 emu/g when applying a magnetic field of 5 kOe.

Magnetite-equipped algal-rich sediments for microbial fuel cells: Remediation of sediment organic matter pollution and mechanisms of remote electron transfer

Using the bio-electrochemical methods for the restoration of high algae sediments is full of potential and challenges. How to promote extracellular electron transfer (EET) process in microbial fuel cells (MFC) is the key bottleneck. The study had explored the potential application of magnetite on accelerating electron transfer for improving the output of MFC and sediment pollution remediation. The results indicated that the organic matter degradation rate showed a remarkable increase of 27.45 %, and the voltage output was approximately 1.68 times higher compared to the MFC configured with regular sediment. Abundant electroactive bacteria (EABs), such as Geobacter and Burkholderiaceae, and fermentative bacteria were responsible for these results, accompanied by the enhanced fluorescence of humic substances (HS), increased concentration and activity of cytochrome C (25.05 % and 21.12 %), as well as elevated extracellular polymeric substance content. Moreover, the intrinsic EET mechanisms among Fe-oxides, HS, and EABs were explored. According to the electrochemical analysis and substance transformation, the EET process involved four stages: magnetite-enhanced direct electron transfer via strong conductivity, iron respiration mediating electron transfer to the electrode, the model quinone substance acting as an electron shuttle facilitating EET and iron reduction, and iron cycling mediating electron transfer. This study provides an effective strategy for pollution remediation in algal-rich sediment, which was beneficial for the harmless treatment and resource utilization of both algae and sediment, simultaneously.

Strategies for optimizing biovivianite production using dissimilatory Fe(III)-reducing bacteria

Vivianite (Fe3(PO4)2·8H2O), a sink for phosphorus, is a key mineralization product formed during the microbial reduction of phosphate-containing Fe(III) minerals in natural systems, and also in wastewater treatment where Fe(III)-minerals are used to remove phosphate. As biovivianite is a potentially useful Fe and P fertiliser, there is much interest in harnessing microbial biovivianite synthesis for circular economy applications. In this study, we investigated the factors that influence the formation of microbially-synthesized vivianite (biovivianite) under laboratory batch systems including the presence and absence of phosphate and electron shuttle, the buffer system, pH, and the type of Fe(III)-reducing bacteria (comparing Geobacter sulfurreducens and Shewanella putrefaciens). The rate of Fe(II) production, and its interactions with the residual Fe(III) and other oxyanions (e.g., phosphate and carbonate) were the main factors that controlled the rate and extent of biovivianite formation. Higher concentrations of phosphate (e.g., P/Fe = 1) in the presence of an electron shuttle, at an initial pH between 6 and 7, were needed for optimal biovivianite formation. Green rust, a key intermediate in biovivianite production, could be detected as an endpoint alongside vivianite and metavivianite (Fe2+Fe3+2(PO4)2.(OH)2.6H2O), in treatments with G. sulfurreducens and S. putrefaciens. However, XRD indicated that vivianite abundance was higher in experiments containing G. sulfurreducens, where it dominated. This study, therefore, shows that vivianite formation can be controlled to optimize yield during microbial processing of phosphate-loaded Fe(III) materials generated from water treatment processes.

Self-Assembled FeIII-TAML-Based Magnetic Nanostructures for Rapid and Sustainable Destruction of Bisphenol A

This study focused on constructing iron(III)-tetraamidomacrocyclic ligand (FeIII-TAML)-based magnetic nanostructures via a surfactant-assisted self-assembly (SAS) method to enhance the reactivity and recoverability of FeIII-TAML activators, which have been widely employed to degrade various organic contaminants. We have fabricated FeIII-TAML-based magnetic nanomaterials (FeIII-TAML/CTAB@Fe3O4, CTAB refers to cetyltrimethylammonium bromide) by adding a mixed solution of FeIII-TAML and NH3·H2O into another mixture containing CTAB, FeCl2 and FeCl3 solutions. The as-prepared FeIII-TAML/CTAB@Fe3O4 nanocomposite showed relative reactivity compared with free FeIII-TAML as indicated by decomposition of bisphenol A (BPA). Moreover, our results demonstrated that the FeIII-TAML/CTAB@Fe3O4 composite can be separated directly from reaction solutions by magnet adsorption and reused for at least four times. Therefore, the efficiency and recyclability of self-assembled FeIII-TAML/CTAB@Fe3O4 nanostructures will enable the application of FeIII-TAML-based materials with a lowered expense for environmental implication.

Amino acid promoted oxidation of atrazine by Fe3O4/persulfate

In the present study, we demonstrated that the presence of cysteine could remarkably enhance the degradation of atrazine by Fe3O4/persulfate system. The results of electron paramagnetic resonance (EPR) spectra confirmed the combination of cysteine and Fe3O4 exhibited much higher activity on activation of persulfate to generate more SO4•- and •OH than Fe3O4 alone. At pH of 3.0, SO4•- and •OH contributed to about 58.2 % and 41.8 % of atrazine removal respectively, while •OH gradually dominated the oxidation of atrazine from neutral condition to alkaline condition. The co-existing Cl- and HCO3- could quench SO4•-, resulting in the inhibition of atrazine degradation. The presence of low natural organic matters (NOM) concentration (0-2 mg L-1) could enhance the atrazine removal, and high concentration (>5 mg L-1) of NOM restrained the atrazine degradation. During the Cysteine/Fe3O4/Persulfate process, cysteine served as a complexing reagent and reductant. Through acidolysis and complexation, Fe3O4 could release dissolved and surface bound Fe2+, both of which contributed to the activation of persulfate together. Meanwhile, cysteine was not rapidly consumed due to a regeneration process, which was beneficial for maintaining Fe2+/Fe3+ cycle and constantly accelerating the activation of persulfate for atrazine degradation. The reused Fe3O4 and cysteine in the Cysteine/Fe3O4/Persulfate process exhibited high stability for the atrazine degradation after three cycles. The degradation pathway of atrazine included alkylic-oxidation, dealkylation, dechlorination-hydroxylation processes. The present study indicates the novel Cysteine/Fe3O4/Persulfate process might be a high potential for treatment of organic polluted water.

Urban and suburban's airborne magnetic particles accumulated on Tillandsia capillaris

Air particle pollution is a current issue that can cause adverse problems to human health and the urban environment. A fraction of these emitted particles is magnetite and iron-rich materials, which may be accumulated by biological indicators and effectively characterized by environmental magnetism methods. Thus, we studied this emitted particle fraction using the epiphytic species Tillandsia capillaris growing in northwestern Argentina's urban, suburban, and rural areas. The accumulated airborne magnetic particles' properties revealed valuable information regarding potentially toxic elements, magnetic mineralogy, sizes, morphology, and concentration. Magnetite was detected in samples from all studied areas, and its remanent coercivity values (Hcr = 32.1-42.6 mT) in (sub)urban sites are similar to other reported cities in Latin America. The concentration of these airborne magnetic particles AMP varied between urban sites (mean and (s.d.) values of in situ magnetic susceptibility κis = 16.2 (9.4) × 10-6 SI, and specific magnetic susceptibility χ = 61.9 (31.4) × 10-8 m3 kg-1) and suburban sites (κis = 13.9 (9.9) × 10-6 SI, and χ = 43.9 (32.2) × 10-8 m3 kg-1), and it was distinctively higher than in clean sites. The spatial distribution of AMP was analyzed using a geostatistical model for the concentration-dependent magnetic parameter κis, which showed zones with high magnetic particle accumulation associated with vehicular traffic in the city and industrial emission in a suburban site. Among concentration-dependent magnetic parameters, the κis is recommended for magnetic biomonitoring because Tillandsia species' individuals are not processed for laboratory measurements, preserving them and allowing us the possibility of measurements over time.

Mechanism of magnetite-assisted aerobic composting on the nitrogen cycle in pig manure

Magnetite affects nitrogen cycle of pig manure (PM) biostabilisation was investigated. Various doses of magnetite (0 % (T1); 2.5 % (T2); 5 % (T3); 7.5 % (T4)) were homogeneously added into PM and wolfberry branch fillings (BF) mixture for a 50-day composting. Compared to T1, total nitrogen (TN) loss in gaseous form increased remarkably by 17.51 %, 56.31 %, and 24.91 %, respectively, in T2-T4. In particular, T3 dramatically increased the cumulative N2O emission but decreased NH3 emissions. However, T2 and T3 enhanced the total nitrogen contents by 7.24 % and 3.09 %. Structural equation models (SEM) analysis indicated that magnetite addition increased the direct and indirect pathways of N2O emission. Further analysis revealed that Ruminofilibacter and N2O emission were significantly correlated, and Pseudomonas played a vital role in nitrogen preservation. Although using 2 % magnetite as an additive could increase the TN content, the obvious increase of N2O emission should be considered in engineering practice.

Fluctuating redox conditions accelerate the electron storage and transfer in magnetite and production of dark hydroxyl radicals

Magnetite (Fe3O4), known as a geo-battery that can store and transfer electrons, often co-occurs with sulfide in subsurface environments with fluctuating redox conditions. However, little is known about how fluctuating redox conditions (e.g., sulfidation-oxidation) affect the electron storage and transfer in Fe3O4 that was associated with the production of dark hydroxyl radicals (⋅OH) and the oxidation of dissolved organic matter (DOM). This study revealed that Fe3O4 sulfidated by sulfide (S-Fe3O4) at neutral pH exhibited higher ⋅OH production upon oxygenation than Fe3O4, in which the cumulative ⋅OH concentration increased with increasing initial S/Fe ratio (≤ 0.50), sulfidation duration and number of sulfidation-oxidation cycle. X-ray photoelectron spectroscopy and wet-chemical analyses of Fe and S species of S-Fe3O4 showed that sulfidation enables electron storage in Fe3O4 by increasing both structural and surface Fe(II). Sulfide was converted into S0, acid volatile sulfur (AVS), and chromium-reducible sulfur (CRS) during Fe3O4 sulfidation. S-Fe3O4 with lower AVS/CRS ratio exhibited higher reactivity to produce ⋅OH, indicating the important role of CRS in transferring electrons from Fe(II) to O2. Based on quenching experiments and electron paramagnetic resonance analysis, a one-step two-electron transfer mechanism was proposed for O2 reduction during S-Fe3O4 oxygenation, and surface-bound rather than free ⋅OH were identified as the primary reactive oxygen species. The ⋅OH from S-Fe3O4 oxygenation was shown to be efficient in degradation of DOM. Overall, these results suggested that sulfidation-oxidation can accelerate the electron storage and transfer in Fe3O4 for dark ⋅OH production, having an important impact on the carbon cycling in subsurface environments.

Spectromicroscopic study of the transformation with low energy ions of a hematite thin film into a magnetite/hematite epitaxial bilayer

The search of new properties in novel oxide heterostructures requires the exploration of new fabrication methods and the study, at the microscopic level, of the processes involved during the synthesis. We present a synchrotron-based spectromicroscopic investigation of a magnetite/hematite bilayer on Pt(111) grown in a two-step process by thermal evaporation and Low Energy Ion Bombardment (LEIB). The characterization includes the study of structural, electronic, chemical, and magnetic properties using X-ray Absorption Spectroscopy (XAS), Low Energy Electron Microscopy (LEEM), Photoemission Electron Microscopy (PEEM), or X-ray Magnetic Circular Dichroism (XMCD). The aim is to obtain microscopic information of the thin film before, during, and after the ion bombardment. Ion bombardment gradually transforms the topmost layers of the hematite thin film into a defective sub-oxide, where magnetite nuclei grow and coalesce with increasing ion doses. Two rotational domains of magnetite coexist, which are typically a few tens of nanometres large and do not grow significantly with temperature annealings. The incoherent growth of the magnetite nuclei favours the formation of stable twin boundaries (TBs) and antiphase boundaries (APBs). Dichroic spectra show the characteristics of the ferrimagnetic (FiM) order of magnetite, and the spatial distribution of magnetic domains shows no apparent correlation with the structural image, displaying smooth domains separated by diffuse frontiers. These findings illustrate the importance of a spectromicroscopic characterization of novel oxide heterostructures for potential future applications.

Ascorbic acid promoted sulfadimidine degradation in the magnetite-activated persulfate system by facilitating the Fe(III)/Fe(II) cycle

Persulfate (PS) activation technologies were of significant importance to the organic contaminant treatment. In this study, ascorbic acid (AA) was introduced to the traditional PS-activated process by using magnetite (Fe3O4) as the activator; herein, the degradation efficiency of sulfadimidine (SM2) was improved from 30 to 93% within 3 h, and the observed removal rate was about 8.0 times higher than that of the Fe3O4/PS system. These improvements were found to be induced by the added AA because it could reduce the surface Fe(III) to Fe(II) on Fe3O4 and thus facilitate the Fe(III)/Fe(II) cycle, which was conducive to producing reactive oxygen species (ROSs) in the oxidation process during PS activation. Meanwhile, AA could also promote the Fe(III)/Fe(II) cycle in the homogeneous solution, further advancing the PS decomposition for SM2 degradation. The ROS trapping experiments indicated that SM2 removal in the Fe3O4/PS/AA system was attributed to •OH and •SO4-, and •SO4- was the dominant ROS. Moreover, the reusability test experiment revealed that magnetite retained good activity after five cycles in the Fe3O4/AA/PS system. This study provides a promising PS activation technology for efficient organics contaminant treatment.

Co-enhancing effects of zero valent iron and magnetite on anaerobic methanogenesis of food waste at transition temperature (45 °C) and various organic loading rates

Deoiling of food waste (FW) after hydrothermal pretreatment occurs at high temperatures, and more energy is required for substrate cooling before the anaerobic digestion (AD) process. AD at the transition temperature (for example 45 °C) is good for energy saving and carbon emission reducing when treating deoiling FW. However, the metabolic activity of methanogens must increase at the transition temperatures. This study proposes the use of zero-valent iron (Fe0) and magnetite (Fe3O4) to boost CH4 yield from deoiling FW. The results showed a co-enhancing effect on CH4 yield upgradation when using Fe0 and Fe3O4 simultaneously, and the highest CH4 yield reached 536.23 mLCH4/gVS, which was 67.5 % higher than that of Fe0 alone (320.14 mLCH4/gVS). In addition, a high organic loading was favorable for increasing the CH4 yield from deoiling FW. Microbial diversity analysis suggested that the dominant methanogenic pathway at 45 °C was hydrogenotrophic methanogenesis. Herein, a potential metabolic pathway analysis revealed that the co-enhancing effects of Fe0 and Fe3O4 enhanced syntrophic methanogenesis and possibly boosted electron transfer efficiency.

Iron oxide magnetic aggregates: Aspects of synthesis, computational approaches and applications

Superparamagnetic magnetite nanoparticles have been central to numerous investigations in the past few decades for their use in many applications, such as drug delivery, medical diagnostics, magnetic separation, and material science. However, the properties of single magnetic nanoparticles are sometimes not sufficient to accomplish tasks where a strong magnetic response is required. In light of this, aggregated magnetite nanoparticles have been proposed as an alternative advanced material, which may expand and combine some of the advantages of single magnetic nanoparticles, including superparamagnetism, with an enhanced magnetic moment and increased colloidal stability. This review comprehensively discusses the current literature on aggregates made of magnetic iron oxide nanoparticles. This review is divided into three sections. First, the current synthetic strategies for magnetite nanoparticle aggregates are discussed, together with the influence of different stabilizers on the primary crystals and the final aggregate size and morphology. The second section is dedicated to computational approaches, such as density functional methods (which permit accurate predictions of electronic and magnetic properties and shed light on the behavior of surfactant molecules on iron oxide surfaces) and molecular dynamics simulations (which provide additional insight into the influence of ligands on the surface chemistry of iron oxide nanocrystals). The last section discusses current and possible future applications of iron oxide magnetic aggregates, including wastewater treatment, water purification, medical applications, and magnetic aggregates for materials displaying structural colors.

In vitro analysis of iron oxide (Fe3O4) nanoparticle mediated degradation of polycyclic aromatic hydrocarbons (PAHs) and their antimicrobial activity

To degrade anthracene, magnetite nanoparticles were produced using a simple co-precipitation process. The fabricated nanoparticles have been analyzed for structural and optical properties. XRD examination revealed that the produced Fe3O4 nanoparticles were cubic phase, having a mean crystallite dimension of 18.84 nm. DLS determined the hydrodynamic diameter of Fe3O4 nanoparticles to be 182 nm. UV-Vis research revealed that Fe3O4 nanoparticles absorb at 390 nm. A peak at 895 cm-1 in the FT-IR study indicated the metal-oxygen connection. The synthesized Fe3O4 nanoparticles demonstrated an effective photocatalytic performance towards anthracene degradation and was found to be 86.55%. Furthermore, Fe3O4 nanoparticles showed the highest antimicrobial activity against Bacillus subtilis was 19.43 mm. The present study is the first and foremost study determining the dual role of Fe3O4 nanoparticles towards bioremediation and biomedical applications.

Enhanced adsorption selectivity of Au(III) over Cu(II) from acidic chloride solutions by chitosan/palm kernel fatty acid distillate/magnetite nanocomposites

This work aimed to develop a modified chitosan adsorbent with enhanced adsorption selectivity for Au(III) over Cu(II) from acidic chloride solutions using low-cost and green raw materials. Various adsorbents, i.e., chitosan powder, chitosan microbeads, chitosan/palm kernel fatty acid distillate (PKFAD) microcomposites, magnetite nanoparticles, and chitosan/PKFAD/magnetite nanocomposites (CPMNs), were first evaluated for their ability to adsorb Au(III) and Cu(II) from single- and binary-metal solutions across different pH levels, followed by parametric analysis of Au(III) and Cu(II) adsorption from binary- and multi-metal solutions onto CPMNs, Au(III) desorption from Au(III)-loaded CPMNs, and reusability of CPMNs. Finally, Au(III)-loaded CPMNs were characterized with SEM-EDX, XRD, FTIR, and XPS to confirm the proposed adsorption mechanisms. Among all the adsorbents studied, CPMNs exhibited outstanding performance in adsorbing Au(III) from an equimolar binary Au(III)-Cu(II) solution, achieving the highest equilibrium adsorption capacity of 0.479 mmol/g (94.4 mg/g) without reaching saturation. Under optimal adsorption conditions of pH 3, 1 g/L CPMN dosage, and 90 min contact time, CPMNs adsorbed 96 % of Au(III) with a selectivity over Cu(II) exceeding 99 %. CPMNs demonstrated excellent reusability, maintaining over 80 % adsorption and desorption efficiencies for 5 cycles. The proposed adsorption mechanisms of CPMNs for Au(III) encompass electrostatic attraction, hydrogen bonding, solvation, and reduction.

Anionic polymer-coated magnetic nanocomposites for immobilization with palladium nanoparticles as catalysts for the reduction of 4-nitrophenol

This study focuses on the synthesis of magnetite nanoparticles (MNP) coated with poly(poly(ethylene glycol) methacrylate) (PPEGMA) and/or poly(acrylic acid) (PAA) to anchor palladium nanoparticles (Pd) for their application as recyclable catalysts in the reduction of 4-nitrophenol (4NP). It was hypothesized that the abundance of oxygen atoms in PPEGMA enabled coordination with the Pd and provided good water dispersibility of the nanocomposites, while anionic PAA stabilized Pd and reduced the catalyst aggregation through electrostatic repulsion. Three different polymer coatings on MNP (PAA, PPEGMA, and PAA-co-PPEGMA polymers) were investigated to assess their influence on both the catalytic activity and reusability of the catalysts. Transmission electron microscopy (TEM) analysis indicated the distribution of spherical Pd nanoparticles (3-5 nm in diameter) and MNP (9-12 nm in diameter). Photocorrelation spectroscopy (PCS) revealed an average hydrodynamic size of the catalysts ranging from 540 to 875 nm in diameter, with a negative charge on their surface. The Pd content of the catalysts ranged from 4.30 to 6.33% w/w. The nanocomposites coated with PAA-co-PPEGMA polymers exhibited more favorable catalytic activity in the 4NP reduction than those coated with PAA or PPEGMA homopolymers. Interestingly, those containing PAA (e.g., PAA and PAA-co-PPEGMA polymers) exhibited good reusability for the 4NP reduction with a slight decrease in their catalytic performance after 26 cycles. This indicates the important role of carboxyl groups in PAA in maintaining high tolerance after multiple uses.

Exploring carbon conversion and balance with magnetite-amended during pig manure composting

This study was designed to explore the magnetite in maturation and humification during pig manure (PM) and wolfberry branch fillings (BF) composting. Different proportions of magnetite (T1, 0%; T2, 2.5%; T3, 5%; T4, 7.5%;) were blended with PM for 50 days of composting. The findings indicated magnetite amendment has no influence on the maturity, and the 5% ratio significantly promoted humic acid (HA) formation and fulvic acid (FA) decomposition compared to other treatments. Compared to T1, magnetite addition significantly increased CO2 and CH4 emissions by 106.39%-191.69% and 6.88-13.72 times. The further analysis suggested that magnetite improved Ruminofilibacter activity were significantly positively associated with HA, and C emissions. The further PICRUSt 2 analysis showed membrane transport may enhance environmental information processing by magnetite. Overall, these results demonstrated higher organic matter (OM) degradation and HA formation with an additional increase in microbial activity highlighted advantages of using magnetite during PM composting.

Unravelling the resilience of magnetite assisted granules to starvation and oxytetracycline stress

Starvation and antibiotics pollution are two frequent perturbations during breeding wastewater treatment process. Supplying magnetite into anaerobic system has been proved efficient to accelerate microbial aggregates and alleviate the adverse effect caused by process disturbance. Nevertheless, whether these magnetite-based granules are still superior over normal granules after a long-term starvation period remains unknown, the responsiveness of these granules to antibiotics stress is also ambiguous. In current study, we investigated the resilience of magnetite-based anaerobic granular sludge (AnGS) to starvation and oxytetracycline (OTC) stress, by unravelling the variations of reactor performance, sludge properties, ARGs dissemination and microbial community. Compared with the AnGS formed without magnetite, the magnetite assisted AnGS appeared more robust defense to starvation and OTC stress. With magnetite supplement, the average methane yield after starvation recovery, 50 mg/L and 200 mg/L OTC stress was enhanced by 48.95%, 115.87% and 488.41%, respectively, accompanied with less VFAs accumulation, improved tetracycline removal rate (76.3-86.6% vs. 51.0-53.5%) and higher ARGs reduction. Meanwhile, magnetite supplement effectively ameliorated the potential sludge breakage by triggering more large granules formation. Trichococcus was considered an important impetus in maintaining the stability of magnetite-based AnGS process. By inducing more syntrophic methanogenesis partnerships, especially for hydrogenotrophic methanogenesis, magnetite ensured the improved reactor performance and stronger resilience at stress conditions.

Computational Assessment of Unsteady Flow Effects on Magnetic Nanoparticle Targeting Efficiency in a Magnetic Stented Carotid Bifurcation Artery

PURPOSE

Worldwide, cardiovascular disease is the leading cause of hospitalization and death. Recently, the use of magnetizable nanoparticles for medical drug delivery has received much attention for potential treatment of both cancer and cardiovascular disease. However, proper understanding of the interacting magnetic field forces and the hydrodynamics of blood flow is needed for effective implementation. This paper presents the computational results of simulated implant assisted medical drug targeting (IA-MDT) via induced magnetism intended for administering patient specific doses of therapeutic agents to specific sites in the cardiovascular system. The drug delivery scheme presented in this paper functions via placement of a faintly magnetizable stent at a diseased location in the carotid artery, followed by delivery of magnetically susceptible drug carriers guided by the local magnetic field. Using this method, the magnetic stent can apply high localized magnetic field gradients within the diseased artery, while only exposing the neighboring tissues, arteries, and organs to a modest magnetic field. The localized field gradients also produce the forces needed to attract and hold drug-containing magnetic nanoparticles at the implant site for delivering therapeutic agents to treat in-stent restenosis.

METHODS

The multi-physics computational model used in this work is from our previous work and has been slightly modified for the case scenario presented in this paper. The computational model is used to analyze pulsatile blood flow, particle motion, and particle capture efficiency in a magnetic stented region using the magnetic properties of magnetite (Fe3O4) and equations describing the magnetic forces acting on particles produced by an external cylindrical electromagnetic coil. The electromagnetic coil produces a uniform magnetic field in the computational arterial flow model domain, while both the particles and the implanted stent are paramagnetic. A Eulerian-Lagrangian technique is adopted to resolve the hemodynamic flow and the motion of particles under the influence of a range of magnetic field strengths (Br = 2T, 4T, 6T, and 8T). Particle diameter sizes of 10 nm-4 µm in diameter were evaluated. Two dimensionless numbers were evaluated in this work to characterize relative effects of Brownian motion (BM), magnetic force induced particle motion, and convective blood flow on particle motion.

RESULTS

The computational simulations demonstrate that the greatest particle capture efficiency results for particle diameters within the micron range of 0.7-4 µm, specifically in regions where flow separation and vortices are at a minimum. Similar to our previous work (which did not involve the use of a magnetic stent), it was also observed that the capture efficiency of particles decreases substantially with particle diameter, especially in the superparamagnetic regime. Contrary to our previous work, using a magnetic stent tripled the capture efficiency of superparamagnetic particles. The highest capture efficiency observed for superparamagnetic particles was 78% with an 8 T magnetic field strength and 65% with a 2 T magnetic field strength when analyzing 100 nm particles. For 10 nm particles and an 8 T magnetic field strength, the particle capture efficiency was 55% and for a 2 T magnetic field strength the particle capture efficiency was observed to be 43%. Furthermore, it was found that larger magnetic field strengths, large particle diameter sizes (1 µm and above), and slower blood flow velocity improves the particle capture efficiency. The distribution of captured particles on the vessel wall along the axial and azimuthal directions is also discussed. Results for captured particles on the vessel wall along the axial flow direction showed that the particle density decreased along the axial direction, especially after the stented region. For the entrance section of the stented region, the captured particle density distribution along the axial direction is large, corresponding to the center-symmetrical distribution of the magnetic force in that section.

CONCLUSION

The simulation results presented in this work have shown to yield favorable capture efficiencies for micron range particles and superparamagnetic particles using magnetized implants such as the stent discussed in this work. The results presented in this work justify further investigation of MDT as a treatment technique for cardiovascular disease.

Rapid, stable, and highly-efficient development of salt-tolerant aerobic granular sludge by inoculating magnetite-assisted mycelial pellets

Long cultivation time hinders the industrial applications of aerobic granular sludge (AGS) in treatment of hypersaline wastewater. Mycelial pellets (MPs) have been used to efficiently strengthen the flocculent sludge aggregation and accelerate the formation of AGS. However, the MPs-based AGS was easily crushed or fragmented into several small pieces/granules that brought the uncertainty and extended the transition process to form mature AGS. In this study, magnetite was used to strengthen MPs (halotolerant fungus Cladosporium tenuissimum NCSL-XY8), and co-culture and adsorption type of magnetite-assisted mycelial pellets (CMMPs and AMMPs) were prepared and used for acceleration of salt-tolerant aerobic granular sludge (SAGS) cultivation under 3% salinity conditions. Compared to inoculating MPs, the inoculation of either CMMPs or AMMPs could stably transition to mature SAGS without evident fragmentation, which obviously increased the certainty and stability of SAGS formation. Also, highly-efficient simultaneous nitrogen and carbon removal (∼98% TOC and ∼80% TN removal) could be reached in 8 days. Typically, the granules maintained perfect characteristics (D50 > 1300 μm, D10 > 350 μm, SVI30 < 45 mL/g, and SVI30/SVI5 = 1.0) during the whole cultivation/transition processes (Day 0-55) by using the inoculum of CMMPs. ITS rDNA sequencing revealed the inoculated fungus Cladosporium tenuissimum played key roles in the formation of SAGS. All the phenomena indicated the rapid, stable, and highly-efficient start-up of SAGS could be successfully realized by inoculating CMMPs.

Accelerated Microbial Corrosion by Magnetite and Electrically Conductive Pili through Direct Fe0 -to-Microbe Electron Transfer

Electrobiocorrosion, the process in which microbes extract electrons from metallic iron (Fe0 ) through direct Fe0 -microbe electrical connections, is thought to contribute to the costly corrosion of iron-containing metals that impacts many industries. However, electrobiocorrosion mechanisms are poorly understood. We report here that electrically conductive pili (e-pili) and the conductive mineral magnetite play an important role in the electron transfer between Fe0 and Geobacter sulfurreducens, the first microbe in which electrobiocorrosion has been rigorously documented. Genetic modification to express poorly conductive pili substantially diminished corrosive pitting and rates of Fe0 -to-microbe electron flux. Magnetite reduced resistance to electron transfer, increasing corrosion currents and intensifying pitting. Studies with mutants suggested that the magnetite promoted electron transfer in a manner similar to the outer-surface c-type cytochrome OmcS. These findings, and the fact that magnetite is a common product of iron corrosion, suggest a potential positive feedback loop of magnetite produced during corrosion further accelerating electrobiocorrosion. The interactions of e-pili, cytochromes, and magnetite demonstrate mechanistic complexities of electrobiocorrosion, but also provide insights into detecting and possibly mitigating this economically damaging process.

Enhance antimony adsorption from aquatic environment by microwave-assisted prepared Fe3O4 nanospherolites

A novel hierarchically nanostructured magnetite (Fe3O4) was manufactured using microwave-assisted reflux method without surfactants. The nanostructured Fe3O4 is formed via the co-precipitation of Fe(III) and Fe(II), followed by a nanocrystal aggregation-based mechanism. Moreover, the effects of solution pH, contact time, initial Sb concentration, coexisting anions, and recycle numbers on the adsorption of nanostructured Fe3O4 toward Sb were extensively examined in the batch adsorption tests. The results demonstrated that the obtained Fe3O4 exhibited excellent adsorption ability toward Sb with the maximum adsorption capacities of 154.2 and 161.1 mg.g-1 for Sb(III) and Sb(V), respectively. The prepared Fe3O4 could be easily regenerated and reused for adsorption/desorption studies multiple times without compromising the Sb adsorption ability. Further exploration indicated that the oxidation or reduction reactions infrequently occurred during Sb adsorption processes. The proposed hierarchically nanostructured Fe3O4 thus could be potentially used for sustainable and efficient antimony removal.

Multi-stimuli-responsive chitosan-functionalized magnetite/poly(ε-caprolactone) nanoparticles as theranostic platforms for combined tumor magnetic resonance imaging and chemotherapy

Chitosan-functionalized magnetite/poly(ε-caprolactone) nanoparticles were formulated by interfacial polymer disposition plus coacervation, and loaded with gemcitabine. That (core/shell)/shell nanostructure was confirmed by electron microscopy, elemental analysis, electrophoretic, and Fourier transform infrared characterizations. A short-term stability study proved the protection against particle aggregation provided by the chitosan shell. Superparamagnetic properties of the nanoparticles were characterized in vitro, while the definition of the longitudinal and transverse relaxivities was an initial indication of their capacity as T2 contrast agents. Safety of the particles was demonstrated in vitro on HFF-1 human fibroblasts, and ex vivo on SCID mice. The nanoparticles demonstrated in vitro pH- and heat-responsive gemcitabine release capabilities. In vivo magnetic resonance imaging studies and Prussian blue visualization of iron deposits in tissue samples defined the improvement in nanoparticle targeting into the tumor when using a magnetic field. This tri-stimuli (magnetite/poly(ε-caprolactone))/chitosan nanostructure could find theranostic applications (biomedical imaging & chemotherapy) against tumors.

Magnetite/β-cyclodextrin/fly ash composite as an effective and recyclable adsorbent for uranium(VI) capture from wastewater

As a novel adsorbent for the separation of uranium(VI) from wastewater, Magnetite/β-cyclodextrin/fly ash composite (Fe₃O₄/β-CD/FA) was first prepared via a chemical coprecipitation technology. The characterization results indicated that Fe₃O₄ and β-CD had been successfully loaded on FA, which had brought abundant oxygen-containing functional groups, providing numerous adsorptive sites for the removal of uranium(VI). At pH = 5.0 and T = 25 °C, the maximum uranium(VI) removal efficiency and capacity of Fe₃O₄/β-CD/FA were higher to 97.8% and 444.4 mg g^-1, respectively. Pseudo-second-order and Langmuir models fitted better with the experimental data, illustrating that chemical adsorption dominated the uranium(VI) removal process. In addition, Fe₃O₄/β-CD/FA showed good anti-interference ability and recoverability. After five cycles, the removal rate of uranium(VI) on Fe₃O₄/β-CD/FA was still higher to 90.4%. The immobilization of uranium(VI) on Fe₃O₄/β-CD/FA was mainly ascribed to the synergism of redox reaction, complex reaction, chemical reaction and electrostatic interaction. Given the above, Fe₃O₄/β-CD/FA would be regarded as an efficacious, green and promising adsorbent for uranium(VI) separation from wastewater.

Dual electro- and magneto-induced bending actuators of magnetite-loaded agarose ionogels

Magnetic ionogels are a new kind of gel composites which combine the elastic properties from the swollen gel matrix and the magnetic properties from a magnetic filler. The dual electro-magneto-responsive agarose ionogels (AG IGels) were fabricated by a solution casting method using 1-butyl-3-methylimidazolium chloride [Bmim][Cl] as the ionic liquid solvent, and embedded with magnetite nanoparticles (Fe₃O₄ NPs). The addition of Fe₃O₄ NPs induced the high bending responses under applied electric and magnetic fields via the electronic polarization and magnetic interaction. The 3.0 wt.% Fe₃O₄/AG MagIGel showed the largest deflection distances relative to other magnetic gel composites; 14.92, 8.96, and 21.63 mm under the applied electric fields of 600 V/mm in silicone oil, 60 V/mm in air, and under the applied magnetic field of 600 G in air, respectively. The bending distances were of comparable in magnitudes to other electro-magneto-responsive materials. Thus, the fabricated Fe₃O₄/AG MagIGels are demonstrated here as potential for soft electric-magnetic actuator applications.

Magnetite enhancing sludge anaerobic fermentation to improve wastewater biological nitrogen removal: Pilot-scale verification

Alkaline anaerobic fermentation for acids production has been considered as an effective method to recover resources from waste activated sludge, and magnetite could improve the quality of fermentation liquid. Here we have constructed a pilot-scale sludge alkaline anaerobic fermentation process enhanced by magnetite to produce short chain fatty acids (SCFAs), and used them as external carbon sources to improve the biological nitrogen removal of municipal sewage. Results showed that the addition of magnetite could significantly increase the production of SCFAs. The average concentration of SCFAs in fermentation liquid reached 3718.6 ± 101.5 mg COD/L and the average concentration of acetic acid reached 2368.8 ± 132.1 mg COD/L. The fermentation liquid enhanced by magnetite were used in the mainstream A²O process, and the TN removal efficiency increased from 48.0% ± 5.4%-62.2% ± 6.6%. The main reason is that the fermentation liquid is conducive to the succession of microbial community in the denitrification process, increasing the abundance of denitrification functional bacteria and realizing the enhancement of denitrification process. Besides, magnetite can promote the activity of enzyme to enhance biological nitrogen removal. Finally, the economic analysis showed that magnetite enhancing sludge anaerobic fermentation was economically and technically feasible to promote biological nitrogen removal of municipal sewage.

Adsorptive behavior of multi-walled carbon nanotubes immobilized magnetic nanoparticles for removing selected pesticides from aqueous matrices

The present work synthesized two new materials of functionalized multi-walled carbon nanotubes (MWCNT-OH and MWCNT-COOH) impregnated with magnetite (Fe₃O₄) using solution precipitation methodology. The resulting MWCNT-OH-Mag and MWCNT-COOH-Mag materials were characterized by scanning electron microscopy coupled with energy dispersion X-ray spectroscopy, Fourier transform infrared, X-ray diffraction, atomic force microscopy, and electrical force microscopy. The characterization results indicate that the -OH functional groups in the MWCNT interact effectively with magnetite iron favoring impregnation and indicating the regular distribution of nanoparticles on the surface of the synthesized materials. The adsorption efficiency of the MWCNT-OH-Mag and MWCNT-COOH-Mag materials was tested using the pollutants 2,4-D and Atrazine. Over batch studies carried out under different pH ranges, it was found that the optimal condition for 2,4-D adsorption was at pH 2, while for Atrazine, it was found at pH 6. The rapid adsorption kinetics of 2,4-D and Atrazine reaches equilibrium within 30 min. The pseudo-first-order model described 2,4-D adsorption well. The General-order model described better atrazine adsorption. The magnetically doped adsorbent functionalized with -OH surface groups (MWCNT-OH-Mag) demonstrated superior adsorption performance and increased Fe-doped sites. The Sips model described the adsorption isotherms accurately. MWCNT-OH-Mag presented the greatest adsorption capacity at 51.4 and 47.7 mg g^-1 for 2,4-D and Atrazine, respectively. Besides, electrostatic forces and complexation rule the molecular interactions between metals and pesticides. The leaching and regeneration tests of the synthesized materials indicate high stability in an aqueous solution. Furthermore, experiments with wastewater samples contaminated with the model pollutants indicate that the novel adsorbents are highly promising for enhancing water purification by adsorptive separation.

The effect of milling time on the preparation of an aluminum matrix composite reinforced with magnetic nanoparticles

Powder metallurgy methods, particularly ball milling, are up-and-coming in tuning metal matrix composite (MMC) properties. This study uses ball milling at various milling times to create an aluminum matrix composite (AMC) reinforced with magnetite nanoparticles. The milling time was optimized to create an AMC with favorable mechanical and magnetic properties, and its effect on magnetism, microstructure, and hardness was studied. The AMC displayed the highest magnetic saturation of 11.04 emu/g after 8 h of milling. After compaction and sintering, characterization of the final composite material using Energy Disperse Spectroscopy and X-ray diffraction (XRD) showed the presence of Al₂O₃ and Fe₃Al phases leading to enhanced mechanical properties in terms of Vickers hardness that reached a value of 81 Hv corresponding to an increase of 270% compared to unreinforced aluminum.

Functional modification of mussel adhesive protein to control solubility and adhesion property

Marine mussels produce strong underwater adhesives called mussel adhesive proteins (MAPs) that can adhere to a variety of surfaces under physiological conditions. Thus, MAPs have been investigated as a potentially sustainable alternative to conventional petrochemical-based adhesives. Recombinant MAPs would be promising for large-scale production and commercialization; however, MAPs are intrinsically adhesive, aggregative, and insoluble in water. In this study, we have developed a solubilization method for the control of MAP adhesion by fusion protein technique. Foot protein 1 (Fp1), a kind of MAP, was fused with the highly water-soluble protein, which is the C-terminal domain of ice-nucleation protein K (InaKC), separated by a protease cleaving site. The fusion protein exhibited low adhesion but high solubility and stability. Notably, Fp1 recovered its adhesive property after removal from the InaKC moiety by protease cleaving, which was evaluated and confirmed by the agglomeration of magnetite particles in water. The ability to control adhesion and agglomeration makes MAPs favorable prospects for bio-based adhesives.

Combined amendment and capping of sediment with ferrihydrite and magnetite to control internal phosphorus release

This study developed novel active capping systems with recycling convenience using ferrihydrite (Fh) combined with magnetite (Mag), and investigated the effectiveness and mechanism for the restriction of endogenous phosphorus movement from sediment into overlying water (OW) by the combined use of Fh and Mag. The Fh/Mag combined amendment effectively hindered endogenous phosphorus release from sediment to OW in dissolved oxygen (DO)-deficit environment, and the immobilization of diffusion gradient in thin film-labile phosphorus (LP_DGT) and mobile phosphorus in the sediment played a key role in the control of endogenous phosphorus liberation by the Fh/Mag combined amendment. Combined capping sediment with Fh and Mag effectively hindered endogenous phosphorus release from sediment to OW in anoxic environment, and the inactivation of LP_DGT in the upper sediment played a key part in the control of sediment phosphorus release by the Fh/Mag mixture capping. The stability of phosphorus immobilized by the Fh/Mag combined covering layer was related to its construction way, and the majority (around 90%) of P immobilized to the Fh/Mag mixture covering layer had low risk of release in common pH (5-9) and DO-deficit environments. The Fh/Mag mixture amendment or capping did not increase the risk of sediment iron release, and it also did not produce a large impact on the diversity and richness of bacterial community in the sediment. The combined utilization of Fh and Mag as a composite amendment or capping material to prevent the internal phosphorus from being moved to OW can make full use of their respective advantages. The Fh/Mag mixture capping wrapped by permeable fabric has high potential to reduce the risk of endogenous phosphorus from sediment into OW due to its advantages of high internal phosphorus release suppression efficiency, environmental friendliness, application convenience and sustainability.

Immobilisation of contaminants by 'green'-synthesized magnetite as a remediation approach to the phosphogypsum waste leachates model solution

Contaminant removal from (waste)waters by magnetite is a promising technology. In the present experimental study, a magnetite recycled from the steel industry waste (zero-valent iron powder) was used to investigate the sorption of As, Sb and U in phosphate-free and -rich suspensions, i.e. as a remediation for the acidic phosphogypsum leachates derived from the phosphate fertilizer industry. The results showed up to 98% U removal under controlled pH conditions, while phosphate did not hinder this immobilisation. In contrast, the results confirmed the limited uptake of As and Sb oxyanions by magnetite in presence of phosphate as the competing anion, displaying only 7-11% removal, compared to 83-87% in the phosphate-free sorption experiments. To limit this wastewater problem, raw ZVI anaerobic oxidation was examined as mechanism to increase the pH and as a source of Fe²⁺ in a first step, and in a second step to remove phosphate via vivianite precipitation, therefore prior to the reaction with magnetite. UV-Vis, XRD and SEM-EDS showed that vivianite precipitation is feasible at pH > 4.5, mainly depending on the phosphate concentration. The higher the [PO₄^3-], the lower is the pH at which vivianite precipitates and the higher the % removal of phosphate from solution. It is anticipated that an optimum 3-steps design with separate reactors controlling the conditions of ZVI oxidation, followed by vivianite precipitation and finally, reaction with magnetite, can achieve high contaminant uptake in field applications.

Comparison of magnetite, hematite and goethite amendment and capping in control of phosphorus release from sediment

The characteristics and mechanism of phosphate adsorption onto magnetite, hematite and goethite were comparatively studied, and the effects of magnetite, hematite and goethite amendment and capping on endogenous phosphorus (P) liberation from sediment into overlying water (OW) were comparatively investigated. The adsorption of phosphate onto magnetite, hematite and goethite mainly obeyed the inner-sphere complexation mechanism, and the phosphate adsorption capacity decreased in the order of magnetite > goethite > hematite. The magnetite, hematite and goethite amendment all can decrease the risk of endogenous Prelease into OW under anoxic conditions, and the inactivation of diffusion gradients in thin films-labile P in sediment made a great contribution to the restraint of endogenous P release into OW by the magnetite, hematite and goethite amendment. The efficiency of endogenous P release restraint by the iron oxide addition decreased in the order of magnetite > goethite > hematite. The magnetite, hematite and goethite capping all can be effective for the suppression of endogenous P release from sediment into OW under anoxic conditions, and most of P immobilized by the magnetite, hematite and goethite capping layers is relatively or very stable. The results obtained from this work suggest that magnetite is more suitably used a capping/amendment material to prevent P release from sediment than hematite and goethite, and magnetite capping is a promising approach for hindering sedimentary P release into OW.

Treatment of Cd(Ⅱ) and As(Ⅴ) co-contamination in aqueous environment by steel slag-biochar composites and its mechanism

As toxic elements of concern, Cd(II) and As(V) pose a threat to human health. In this study, a new type of magnetic adsorbent (SBNa800) was prepared using a mixture of industrial waste steel slag and ginkgo leaves to treat wastewater contaminated with Cd(II) and As(V). The maximum adsorption capacities of SBNa800 for Cd(II) and As(V) were 109.17 (pH 5, 1.82 times that of the original biochar) and 59.79 (pH 3) mg/g, respectively. Cd(II) and As(V) adsorption capacities was above 90 % at pH = 4. Cd(II) and As(V) were synergistic and competitive adsorption. The results of μ-XRF, XANES and XPS showed that Cd(II) was adsorbed by SBNa800 in the forms of Cd(OH)₂, CdCO₃, Cd₅H₂(AsO₄)₄·4 H₂O, CdCl₂·2.5 H₂O and Cd(NO₃)₂. About 52.79-64.61 % As(V) was reduced to As(III) by Fe(0) on SBNa800 and then adsorbed. The adsorption mechanisms of Cd(II), As(V) and As(III) were hydrogen bonding/electrostatic attraction, inner-sphere complexation and precipitation. The saturation magnetisation of SBNa800, which was easy to separate from wastewater, was 6.54 emu/g. Therefore, SBNa800 can be used as a potential adsorbent to treat wastewater contaminated with Cd(II) and As(V).

Mesoporous Ag-functionalized magnetic activated carbon-based agro-waste for efficient removal of Pb(II), Cd(II), and microorganisms from wastewater

Herein, eco-friendly mesoporous magnetic activated carbon-based agro-waste nanosorbents incorporating antimicrobial silver nanoparticles (Mag@AC1-Ag and Mag@AC1-Ag) have been prepared. Various techniques (XRD, SEM/EDX, TEM, FTIR, and BET analysis) were employed to characterize the prepared nanosorbents before being utilized as novel nanosorbents to remove Pb+2 and Cd+2 ions. Mag@AC1-Ag and Mag@AC1-Ag exhibited rapid and excellent uptake of Pb+2 and Cd+2. The pseudo-second-order kinetics and the Langmuir isotherm are more suitable for the explanation of the experimental results. The thermodynamic parameters showed that the Pb+2 and Cd+2 sorption by the nanosorbents was a spontaneous and endothermic reaction. The prepared nanosorbents can be effectively regenerated using HCl and recycled up to the fifth cycle. These nanosorbents' potential uses for eliminating Pb+2 and Cd+2 from real water samples were evaluated. Moreover, the results revealed that both Mag@AC1-Ag and Mag@AC2-Ag exhibited high antimicrobial activity against fecal coliform (gram-negative) and Bacillus subtilis (gram-positive).

Recent advances in studies on magnetosome-associated proteins composing the bacterial geomagnetic sensor organelle

Magnetotactic bacteria (MTB) generate a membrane-enclosed subcellular compartment called magnetosome, which contains a biomineralized magnetite or greigite crystal, an inner membrane-derived lipid bilayer membrane, and a set of specifically targeted associated proteins. Magnetosomes are formed by a group of magnetosome-associated proteins encoded in a genomic region called magnetosome island. Magnetosomes are then arranged in a linear chain-like positioning, and the resulting magnetic dipole of the chain functions as a geomagnetic sensor for magneto-aerotaxis motility. Recent metagenomic analyses of environmental specimens shed light on the sizable phylogenetical diversity of uncultured MTB at the phylum level. These findings have led to a better understanding of the diversity and conservation of magnetosome-associated proteins. This review provided an overview of magnetosomes and magnetosome-associated proteins and introduced recent topics about this fascinating magnetic bacterial organelle. This article is protected by copyright. All rights reserved.

Highly active and magnetically recoverable heterogeneous catalyst for hydrothermal liquefaction of biomass into high quality bio-oil

This article reports a safe, low-cost, and industrially applicable magnetite supported on activated carbon catalyst that can be magnetically retrieved from the solid and reused multiple times without the need of a regeneration step. The FeO_x/C catalyst improved the bio-oil yield by 19.7 ± 0.96 % when compared to the uncatalysed reaction at 320 °C for the HTL of draff (brewer's spent grains). The use of homogeneous Na₂CO₃ base as a catalyst and co-catalyst, improved carbon extraction into the aqueous phase. The exceptional catalytic activity can be attributed to the Fe₃O₄ phase which can produce in-situ H₂ that improves the biomass decomposition and oil property with an energy recovery of ∼84 %. The FeO_x/C catalyst was separated using magnetic retrieval and maintained its catalytic activity even up to 5 reaction cycles showing potential as a cheap catalyst for HTL reactions and can be scaled-up for industrial applications.

Effects of synthesized AlFe2O4 and MgFe2O4 nanoparticles on biogas production from anaerobically digested sugar refinery wastewater

The application of magnetic nanoparticles (MNPs) toward sustainable water economy and bioenergy production has become a subject of great interest. Anaerobic digestion (AD) has been widely exploited in wastewater treatment settings, whereby utilization of MNP additives by microorganism response for degradation of organics into biogas is seen to be eco-friendly and economically viable. The present study investigated the impact of two synthesized MNPs such as aluminum ferrite (AlFe₂O₄) and magnesium ferrite (MgFe₂O₄) on biogas production via biochemical methane potential (BMP) tests. A BMP set-up of three (3) bioreactors was tested with a working volume of 0.8 L which comprises 0.5 L wastewater (WW) and 0.3 L activated sludge (AS) with 1.5 g of the MNPs and a control system without MNPs. The degradation of chemical oxygen demand (COD) was increased with set-ups that contained MNPs as compared to the control system, MgFe₂O₄ (93.96%) > AlFe₂O₄ (85.95%) > control (68.83%). In terms of biogas production, the methane yield was also recorded as MgFe₂O₄ (85.7%) > AlFe₂O₄ (84.3%) > control (65.7%). The physical and chemical stability of MNPs makes them more advantageous for application in biogas production. In the prospects of biogas enhancement and biodegradability, integrating MNPs in an anaerobic digestion system will result in a more efficient anaerobic process performance for biogas production.