Effects of synthesized AlFe2O4 and MgFe2O4 nanoparticles on biogas production from anaerobically digested sugar refinery wastewater

The application of magnetic nanoparticles (MNPs) toward sustainable water economy and bioenergy production has become a subject of great interest. Anaerobic digestion (AD) has been widely exploited in wastewater treatment settings, whereby utilization of MNP additives by microorganism response for degradation of organics into biogas is seen to be eco-friendly and economically viable. The present study investigated the impact of two synthesized MNPs such as aluminum ferrite (AlFe₂O₄) and magnesium ferrite (MgFe₂O₄) on biogas production via biochemical methane potential (BMP) tests. A BMP set-up of three (3) bioreactors was tested with a working volume of 0.8 L which comprises 0.5 L wastewater (WW) and 0.3 L activated sludge (AS) with 1.5 g of the MNPs and a control system without MNPs. The degradation of chemical oxygen demand (COD) was increased with set-ups that contained MNPs as compared to the control system, MgFe₂O₄ (93.96%) > AlFe₂O₄ (85.95%) > control (68.83%). In terms of biogas production, the methane yield was also recorded as MgFe₂O₄ (85.7%) > AlFe₂O₄ (84.3%) > control (65.7%). The physical and chemical stability of MNPs makes them more advantageous for application in biogas production. In the prospects of biogas enhancement and biodegradability, integrating MNPs in an anaerobic digestion system will result in a more efficient anaerobic process performance for biogas production.

Assessment of Magnetic Nanomaterials for Municipality Wastewater Treatment Using Biochemical Methane Potential (BMP) Tests

Wastewater as a substrate potential for producing renewable energy in the form of biogas is gaining global attention. Herein, nanomaterials can be utilised as a nutrient source for microorganisms for anaerobic digestion activity. Therefore, this study explored the impact of seven different magnetic nanomaterials (MNMs) on the anaerobic digestion of wastewater via biochemical methane potential (BMP) tests for biogas production. The BMP assay was carried out with eight bioreactors, where each was charged with 50% wastewater and 30% activated sludge, leaving a headspace of 20%. Aside the control bioreactor, the other seven (7) bioreactors were dosed with 1.5 g of MNMs. This was operated under anaerobic conditions at a mesophilic temperature of 35 °C for 31 days. At the degree of 80% degradation of contaminants, the results that showed bioreactors charged with 1.5 g MNMs of TiO₂ photocatalyst composites were more effective than those constituting metallic composites, whereas the control achieved 65% degradation. Additionally, the bioreactor with magnetite (Fe₃O₄) produced the highest cumulative biogas of 1172 mL/day. Kinetically, the modified Gompertz model favoured the cumulative biogas data obtained with a significant regression coefficient (R²) close to one.

Desalination of Municipal Wastewater Using Forward Osmosis

Membrane technology has gained much ground in water and wastewater treatment over the past couple of decades. This is timely, as the world explores smart, eco-friendly, and cheap water and wastewater treatment technologies in its quest to make potable water and sanitation commonplace in all parts of the world. Against this background, this study investigated forward osmosis (FO) in the removal of salts (chlorides, sulphates, and carbonates) and organics (chemical oxygen demand (COD), turbidity, total suspended solids (TSS), and color) from a synthetic municipal wastewater (MWW), mimicking secondary-treated industrial wastewater, at very low feed and draw solution flow rates (0.16 and 0.14 L/min respectively), using 70 g/L NaCl solution as the draw solution. The results obtained showed an average of 97.67% rejection of SO₄²⁻ and CO₃²⁻ while Cl⁻ was found to enrich the feed solution (FS). An average removal of 88.92% was achieved for the organics. A permeation flux of 5.06 L/m².h was obtained. The kinetics of the ions transport was studied, and was found to fit the second-order kinetic model, with Pearson’s R-values of 0.998 and 0.974 for Cl⁻ and CO₃²⁻ respectively. The study proves FO as a potential technology to desalinate saline MWW.