Red-emitting rhodamines with hydroxylated, sulfonated, and phosphorylated dye residues and their use in fluorescence nanoscopy

Modular Design and Scaffold-Synthesis of Multi-Functional Fluorophores for Targeted Cellular Imaging and Pyroptosis

Fluorophores are essential tools for optical imaging and biomedical research. Their synthetic modification to incorporate new functions, however, remains a challenging task. Conventional strategies rely on linear synthesis in which a parent framework is gradually extended. We here designed and synthesized a versatile library of multi-functional fluorophores via a scaffold-based Ugi four-component reaction (U-4CR). The adaptability of the scaffold is achieved through modification of starting materials. This allows to use a small range of starting materials for the creation of fluorogenic probes that can detect reactive-oxygen species and where the localization into subcellular organelles or membranes can be controlled. We present reaction yields ranging from 60 % to 90 % and discovered that some compounds can even function as imaging and therapeutic agents via Fenton chemistry inducing pyroptosis in living cancer cells. Our study underlines the potential of scaffold-based synthesis for versatile creation of functional fluorophores and their applications.

Tackling the water solubility dilemma of spiroring-closing rhodamine: Sulfone-functionalization enabling rational designing water-soluble probe for rapid visualizing mercury ions in cosmetics

Rhodamine derivatives possessing spiroring-closing structures exhibit colorlessness, while the induction of spiroring-opening by metal ions results in notable color changes, rendering them as ideal platform for the development of functional probes with broad applications. However, the spiroring-closing form of rhodamine-based probes exhibits limited water solubility due to its neutral character, necessitating the incorporation of organic solvents to enhance solubility, which may adversely affect the natural system. Designing rhodamine probes with high solubility in both the zwitterionic and neutral form is of utmost importance and presents a significant challenge. This study presents a sulfone-rhodamine-based probe that exhibits good water solubility both in the spiroring opening and closing for detecting Hg2+. Upon the presence of Hg2+, the color undergoes a noticeable change from colorless to pink, with a response time of less than 1 min. probe 1 demonstrates an excellent linear relationship with Hg2+ concentrations within the range of 0-8 μM, and achieves a detection limit is 17.26 nM. The effectiveness of probe 1 was confirmed through the analysis of mercury ions in cosmetic products. Utilizing this probe, test paper strips have been developed to enhance the portability of Hg2+ detection naked eyes.

Thiolation for Enhancing Photostability of Fluorophores at the Single-Molecule Level

Fluorescent probes are essential for single-molecule imaging. However, their application in biological systems is often limited by the short photobleaching lifetime. To overcome this, we developed a novel thiolation strategy for squaraine dyes. By introducing thiolation of the central cyclobutene of squaraine (thio-squaraine), we observed a ≈5-fold increase in photobleaching lifetime. Our single-molecule data analysis attributes this improvement to improved photostability resulting from thiolation. Interestingly, bulk measurements show rapid oxidation of thio-squaraine to its oxo-analogue under irradiation, giving the perception of inferior photostability. This discrepancy between bulk and single-molecule environments can be ascribed to the factors in the latter, including larger intermolecular distances and restricted mobility, which reduce the interactions between a fluorophore and reactive oxygen species produced by other fluorophores, ultimately impacting photobleaching and photoconversion rate. We demonstrate the remarkable performance of thio-squaraine probes in various imaging buffers, such as glucose oxidase with catalase (GLOX) and GLOX+trolox. We successfully employed these photostable probes for single-molecule tracking of CD56 membrane protein and monitoring mitochondria movements in live neurons. CD56 tracking revealed distinct motion states and the corresponding protein fractions. This investigation is expected to propel the development of single-molecule imaging probes, particularly in scenarios where bulk measurements show suboptimal performance.

OregonFluor enables quantitative intracellular paired agent imaging to assess drug target availability in live cells and tissues

Non-destructive fluorophore diffusion across cell membranes to provide an unbiased fluorescence intensity readout is critical for quantitative imaging applications in live cells and tissues. Commercially available small-molecule fluorophores have been engineered for biological compatibility, imparting high water solubility by modifying rhodamine and cyanine dye scaffolds with multiple sulfonate groups. The resulting net negative charge, however, often renders these fluorophores cell-membrane-impermeant. Here we report the design and development of our biologically compatible, water-soluble and cell-membrane-permeable fluorophores, termed OregonFluor (ORFluor). By adapting previously established ratiometric imaging methodology using bio-affinity agents, it is now possible to use small-molecule ORFluor-labelled therapeutic inhibitors to quantitatively visualize their intracellular distribution and protein target-specific binding, providing a chemical toolkit for quantifying drug target availability in live cells and tissues.

Photochemical Mechanisms of Fluorophores Employed in Single-Molecule Localization Microscopy

Decoding cellular processes requires visualization of the spatial distribution and dynamic interactions of biomolecules. It is therefore not surprising that innovations in imaging technologies have facilitated advances in biomedical research. The advent of super-resolution imaging technologies has empowered biomedical researchers with the ability to answer long-standing questions about cellular processes at an entirely new level. Fluorescent probes greatly enhance the specificity and resolution of super-resolution imaging experiments. Here, we introduce key super-resolution imaging technologies, with a brief discussion on single-molecule localization microscopy (SMLM). We evaluate the chemistry and photochemical mechanisms of fluorescent probes employed in SMLM. This Review provides guidance on the identification and adoption of fluorescent probes in single molecule localization microscopy to inspire the design of next-generation fluorescent probes amenable to single-molecule imaging.

Linker Molecules Convert Commercial Fluorophores into Tailored Functional Probes during Biolabelling

Many life‐science techniques and assays rely on selective labeling of biological target structures with commercial fluorophores that have specific yet invariant properties. Consequently, a fluorophore (or dye) is only useful for a limited range of applications, e.g., as a label for cellular compartments, super‐resolution imaging, DNA sequencing or for a specific biomedical assay. Modifications of fluorophores with the goal to alter their bioconjugation chemistry, photophysical or functional properties typically require complex synthesis schemes. We here introduce a general strategy that allows to customize these properties during biolabelling with the goal to introduce the fluorophore in the last step of biolabelling. For this, we present the design and synthesis of ‘linker’ compounds, that bridge biotarget, fluorophore and a functional moiety via well‐established labeling protocols. Linker molecules were synthesized via the Ugi four‐component reaction (Ugi‐4CR) which facilitates a modular design of linkers with diverse functional properties and bioconjugation‐ and fluorophore attachment moieties. To demonstrate the possibilities of different linkers experimentally, we characterized the ability of commercial fluorophores from the classes of cyanines, rhodamines, carbopyronines and silicon‐rhodamines to become functional labels on different biological targets in vitro and in vivo via thiol‐maleimide chemistry. With our strategy, we showed that the same commercial dye can become a photostable self‐healing dye or a sensor for bivalent ions subject to the linker used. Finally, we quantified the photophysical performance of different self‐healing linker–fluorophore conjugates and demonstrated their applications in super‐resolution imaging and single‐molecule spectroscopy.

Membrane-Permeant, Bioactivatable Coumarin Derivatives for In-Cell Labelling

The delivery of small molecule fluorophores with minimal compartmentalization is currently one of the most critical technical problems in intracellular labelling. Here we introduce sulfonated and phosphonated coumarin dyes, demonstrate rapid cell entry via a prodrug approach, and show a lack of interaction with membranes, organelles, or other compartments. The dyes show no specific localization and are evenly distributed in the cells. Our fluorogenic, clickable phosphonate derivatives successfully tagged model targets in intact cells and the increase in brightness upon click reaction was around 60-fold.

Bleaching-Resistant Super-Resolution Fluorescence Microscopy

Photobleaching is the permanent loss of fluorescence after extended exposure to light and is a major limiting factor in super-resolution microscopy (SRM) that restricts spatiotemporal resolution and observation time. Strategies for preventing or overcoming photobleaching in SRM are reviewed developing new probes and chemical environments. Photostabilization strategies are introduced first, which are borrowed from conventional fluorescence microscopy, that are employed in SRM. SRM-specific strategies are then highlighted that exploit the on-off transitions of fluorescence, which is the key mechanism for achieving super-resolution, which are becoming new routes to address photobleaching in SRM. Off states can serve as a shelter from excitation by light or an exit to release a damaged probe and replace it with a fresh one. Such efforts in overcoming the photobleaching limits are anticipated to enhance resolution to molecular scales and to extend the observation time to physiological lifespans.

Borisov S. Carbazole- and Fluorene-Fused Aza-BODIPYs: NIR Fluorophores with High Brightness and Photostability

Three new aza-BODIPY dyes incorporating fused fluorene or carbazole moieties have been prepared. The dyes show significant enhancement of photophysical properties compared to the parent 1,3,5,7-tetraphenyl aza-BODIPY (TPAB): a bathochromic shift of the absorption maximum (up to 2700 cm-1 ) and emission maximum (up to 2270 cm-1 ); an almost threefold increase in molar absorption coefficients (to ca. 230 000 M-1  cm-1 ) and a significant increase in the fluorescence quantum yield to 49-66 %. Owing to the combination of these properties, the new aza-BODIPY dyes belong to the brightest NIR dyes reported. The dyes also show excellent photostability. Due to their outstanding properties, the new dyes represent a promising platform for further exploration in biomedical research. A pH indicator containing only one fused carbazole unit was also prepared and shows absorption and emission spectra that are bathochromically shifted by about 110 and 100 nm, respectively, compared to the indicator dye based on the TPAB chromophore.

Everlasting rhodamine dyes and true deciding factors in their STED microscopy performance

The authors took an independent and closer look at the family of red-emitting rhodamine dyes known for a decade due to their excellent performance in STED microscopy. After the family was further extended, the true grounds of this performance became clear. Small-molecule protective agents and/or auxiliary groups were attached at two different sites of the dye's scaffold. Thus, a rhodamine core, which is already quite photostable as it is, and an intramolecular stabilizer - a 4-nitrobenzyl or a 4-nitrobenzylthio group were combined to give potentially "everlasting dyes". The fluorescence quantum yields (Φ_f) and the fluorescence lifetimes (τ) of the modified dyes were thoroughly measured with comparison to those of the parent dyes. The correlation of their STED performance with photostability and fluorescence color stability under illumination in water were explored. Unexpectedly, the anaerobic GSDIM (GOC) buffer proved unhelpful with respect to STED performance. It was demonstrated that, even dyes with a Φ_f of only 14-17% allow STED imaging with a sufficient photon budget and good signal-to-noise ratio. For the dyes with photostabilizing groups (PSG) the Φ_f values are 4-5 times lower than in the reference dyes, and lifetimes τ are also strongly reduced. Noteworthy are very high fluorescence color stability and constant or even increasing fluorescence signal under photobleaching in bulk aqueous solutions, which suggests a sacrificing role of the 4-nitrobenzyl-containing moieties. Straightforward and improved recipes for "last-minute" modifications and preparations of "self-healing" red-emitting fluorescent tags are described.

What is Best Strategy for Water Soluble Fluorescence Dyes?-A Case Study Using Long Fluorescence Lifetime DAOTA Dyes*

The lipophilic nature of organic dyes complicates their effectiveness in aqueous solutions. In this work we investigate three different strategies for achieving water-solubility of the diazaoxatriangulenium (DAOTA⁺ ) chromophore: hydrophilic counter ions, aromatic sulfonation of the chromophore, and attachment of charged side chains. The long fluorescence lifetime (FLT, τ_f =20 ns) of DAOTA⁺ makes it a sensitive probe to analyze solvation and aggregation effects. Direct sulfonation of the chromophore was found to increase solubility drastically, but at the cost of greatly reduced quantum yields (QYs) due to enhanced non-radiative deactivation processes. The introduction of either cationic (4) or zwitterionic side chains (5), however, brings the FLT (τ_f =18 ns) and QY (ϕ_f =0.56) of the dye to the same level as the parent chromophore in acetonitrile. Time-resolved fluorescence spectroscopy also reveals a high resistance to aggregation and non-specific binding in a high loading of bovine serum albumin (BSA). The results clearly show that addition of charged flexible side chains is preferable to direct sulfonation of the chromophore core.

Toxicology in the Super-Resolution Era

Light microscopy has played a central role in science for the past couple of hundred years and will continue to do so. Multiple super-resolution microscopy techniques have been in the headlines for smashing what for more than 100+ years was believed to be the limits of optical microscopy. This resolution improvement enables the visualization of molecular structures and processes on the nano scale. While certain scientific questions in toxicology can benefit from modalities within the super-resolution suite, due diligence is required for efficiency and to achieve optimal results. For a given hypothesis being tested, there are biophysical issues that need to be considered before heading down the super-resolution road. All commercially available super-resolution modalities, along with cautions and tips, will be discussed. © 2019 by John Wiley & Sons, Inc.

Photobleaching in STED nanoscopy and its dependence on the photon flux applied for reversible silencing of the fluorophore

In STED (stimulated emission depletion) nanoscopy, the resolution and signal are limited by the fluorophore de-excitation efficiency and photobleaching. Here, we investigated their dependence on the pulse duration and power of the applied STED light for the popular 750 nm wavelength. In experiments with red- and orange-emitting dyes, the pulse duration was varied from the sub-picosecond range up to continuous-wave conditions, with average powers up to 200 mW at 80 MHz repetition rate, i.e. peak powers up to 1 kW and pulse energies up to 2.5 nJ. We demonstrate the dependence of bleaching on pulse duration, which dictates the optimal parameters of how to deliver the photons required for transient fluorophore silencing. Measurements with the dye ATTO647N reveal that the bleaching of excited molecules scales with peak power with a single effective order ~1.4. This motivates peak power reduction while maintaining the number of STED-light photons, in line with the superior resolution commonly achieved for nanosecond STED pulses. Other dyes (ATTO590, STAR580, STAR635P) exhibit two distinctive bleaching regimes for constant pulse energy, one with strong dependence on peak power, one nearly independent. We interpret the results within a photobleaching model that guides quantitative predictions of resolution and bleaching.

"Reduced" Coumarin Dyes with an O-Phosphorylated 2,2-Dimethyl-4-(hydroxymethyl)-1,2,3,4-tetrahydroquinoline Fragment: Synthesis, Spectra, and STED Microscopy

Large Stokes-shift coumarin dyes with an O-phosphorylated 4-(hydroxymethyl)-2,2-dimethyl-1,2,3,4-tetrahydroquinoline fragment emitting in the blue, green, and red regions of the visible spectrum were synthesized. For this purpose, N-substituted and O-protected 1,2-dihydro-7-hydroxy-2,2,4-trimethylquinoline was oxidized with SeO2 to the corresponding α,β-unsaturated aldehyde and then reduced with NaBH4 in a "one-pot" fashion to yield N-substituted and 7-O-protected 4-(hydroxymethyl)-7-hydroxy-2,2-dimethyl-1,2,3,4-tetrahydroquinoline as a common precursor to all the coumarin dyes reported here. The photophysical properties of the new dyes ("reduced coumarins") and 1,2-dihydroquinoline analogues (formal precursors) with a trisubstituted C=C bond were compared. The "reduced coumarins" were found to be more photoresistant and brighter than their 1,2-dihydroquinoline counterparts. Free carboxylate analogues, as well as their antibody conjugates (obtained from N-hydroxysuccinimidyl esters) were also prepared. All studied conjugates with secondary antibodies afforded high specificity and were suitable for fluorescence microscopy. The red-emitting coumarin dye bearing a betaine fragment at the C-3-position showed excellent performance in stimulation emission depletion (STED) microscopy.

A fluorescence anisotropy-based assay for determining the activity of tissue transglutaminase

Tissue transglutaminase (TGase 2) is the most abundantly expressed enzyme of the transglutaminase family and involved in a large variety of pathological processes, such as neurodegenerative diseases, disorders related to autoimmunity and inflammation as well as tumor growth, progression and metastasis. As a result, TGase 2 represents an attractive target for drug discovery and development, which requires assays that allow for the characterization of modulating agents and are appropriate for high-throughput screening. Herein, we report a fluorescence anisotropy-based approach for the determination of TGase 2's transamidase activity, following the time-dependent increase in fluorescence anisotropy due to the enzyme-catalyzed incorporation of fluorescein- and rhodamine B-conjugated cadaverines 1-3 (acyl acceptor substrates) into N,N-dimethylated casein (acyl donor substrate). These cadaverine derivatives 1-3 were obtained by solid-phase synthesis. To allow efficient conjugation of the rhodamine B moiety, different linkers providing secondary amine functions, such as sarcosyl and isonipecotyl, were introduced between the cadaverine and xanthenyl entities in compounds 2 and 3, respectively, with acyl acceptor 3 showing the most optimal substrate properties of the compounds investigated. The assay was validated for the search of both irreversible and reversible TGase 2 inhibitors using the inactivators iodoacetamide and a recently published L-lysine-derived acrylamide and the allosteric binder GTP, respectively. In addition, the fluorescence anisotropy-based method was proven to be suitable for high-throughput screening (Z' factor of 0.86) and represents a non-radioactive and highly sensitive assay for determining the active TGase 2 concentration.

Lens-based fluorescence nanoscopy

The majority of studies of the living cell rely on capturing images using fluorescence microscopy. Unfortunately, for centuries, diffraction of light was limiting the spatial resolution in the optical microscope: structural and molecular details much finer than about half the wavelength of visible light (~200 nm) could not be visualized, imposing significant limitations on this otherwise so promising method. The surpassing of this resolution limit in far-field microscopy is currently one of the most momentous developments for studying the living cell, as the move from microscopy to super-resolution microscopy or 'nanoscopy' offers opportunities to study problems in biophysical and biomedical research at a new level of detail. This review describes the principles and modalities of present fluorescence nanoscopes, as well as their potential for biophysical and cellular experiments. All the existing nanoscopy variants separate neighboring features by transiently preparing their fluorescent molecules in states of different emission characteristics in order to make the features discernible. Usually these are fluorescent 'on' and 'off' states causing the adjacent molecules to emit sequentially in time. Each of the variants can in principle reach molecular spatial resolution and has its own advantages and disadvantages. Some require specific transitions and states that can be found only in certain fluorophore subfamilies, such as photoswitchable fluorophores, while other variants can be realized with standard fluorescent labels. Similar to conventional far-field microscopy, nanoscopy can be utilized for dynamical, multi-color and three-dimensional imaging of fixed and live cells, tissues or organisms. Lens-based fluorescence nanoscopy is poised for a high impact on future developments in the life sciences, with the potential to help solve long-standing quests in different areas of scientific research.

A Phosphole Oxide Based Fluorescent Dye with Exceptional Resistance to Photobleaching: A Practical Tool for Continuous Imaging in STED Microscopy

The development of stimulated emission depletion (STED) microscopy represented a major breakthrough in cellular and molecular biology. However, the intense laser beams required for both excitation and STED usually provoke rapid photobleaching of fluorescent molecular probes, which significantly limits the performance and practical utility of STED microscopy. We herein developed a photoresistant fluorescent dye C-Naphox as a practical tool for STED imaging. With excitation using either a λ=405 or 488 nm laser in protic solvents, C-Naphox exhibited an intense red/orange fluorescence (quantum yield ΦF >0.7) with a large Stokes shift (circa 5900 cm(-1) ). Even after irradiation with a Xe lamp (300 W, λex =460 nm, full width at half maximum (FWHM)=11 nm) for 12 hours, 99.5 % of C-Naphox remained intact. The high photoresistance of C-Naphox allowed repeated STED imaging of HeLa cells. Even after recording 50 STED images, 83 % of the initial fluorescence intensity persisted.

Azobenzene-caged sulforhodamine dyes: a novel class of 'turn-on' reactive probes for hypoxic tumor cell imaging

New sulforhodamine-based fluorescent 'turn-on' probes have been developed for the direct imaging of cellular hypoxia. Rapid access to this novel class of water-soluble 'azobenzene-caged' fluorophores was made possible through an easily-implementable azo-coupling reaction between a fluorescent primary arylamine derived from a sulforhodamine 101 scaffold (named SR101-NaphtNH ₂ ) and a tertiary aniline whose N-substituents are neutral, cationic, or zwitterionic. The detection mechanism is based on the bioreductive cleavage of the azo bond that restores strong far-red fluorescence (emission maximum at 625 nm) by regenerating the original sulforhodamine SR101-NaphtNH ₂ . This valuable fluorogenic response was obtained for the three 'smart' probes studied in this work, as shown by an in vitro assay using rat liver microsomes placed under aerobic and then under hypoxic conditions. Most importantly, the probe namely SR101-NaphtNH ₂ -Hyp-diMe was successfully applied for imaging the hypoxic status of tumor cells (A549 cells).

Single-molecule spectroscopy of protein conformational dynamics in live eukaryotic cells

Single-molecule methods have become widely used for quantifying the conformational heterogeneity and structural dynamics of biomolecules in vitro. Their application in vivo, however, has remained challenging owing to shortcomings in the design and reproducible delivery of labeled molecules, the range of applicable analysis methods, and suboptimal cell culture conditions. By addressing these limitations in an integrated approach, we demonstrate the feasibility of probing protein dynamics from milliseconds down to the nanosecond regime in live eukaryotic cells with confocal single-molecule Förster resonance energy transfer (FRET) spectroscopy. We illustrate the versatility of the approach by determining the dimensions and submicrosecond chain dynamics of an intrinsically disordered protein; by detecting even subtle changes in the temperature dependence of protein stability, including in-cell cold denaturation; and by quantifying the folding dynamics of a small protein. The methodology opens possibilities for assessing the effect of the cellular environment on biomolecular conformation, dynamics and function.

Fluorescent labeling of SNAP-tagged proteins in cells

One of the most prominent self-labeling tags is SNAP-tag. It is an in vitro evolution product of the human DNA repair protein O (6)-alkylguanine-DNA alkyltransferase (hAGT) that reacts specifically with benzylguanine (BG) and benzylchloropyrimidine (CP) derivatives, leading to covalent labeling of SNAP-tag with a synthetic probe (Gronemeyer et al., Protein Eng Des Sel 19:309-316, 2006; Curr Opin Biotechnol 16:453-458, 2005; Keppler et al., Nat Biotechnol 21:86-89, 2003; Proc Natl Acad Sci U S A 101:9955-9959, 2004). SNAP-tag is well suited for the analysis and quantification of fused target protein using fluorescence microscopy techniques. It provides a simple, robust, and versatile approach to the imaging of fusion proteins under a wide range of experimental conditions.

Super-resolution imaging of the Golgi in live cells with a bioorthogonal ceramide probe

We report a lipid-based strategy to visualize Golgi structure and dynamics at super-resolution in live cells. The method is based on two novel reagents: a trans-cyclooctene-containing ceramide lipid (Cer-TCO) and a highly reactive, tetrazine-tagged near-IR dye (SiR-Tz). These reagents assemble via an extremely rapid "tetrazine-click" reaction into Cer-SiR, a highly photostable "vital dye" that enables prolonged live-cell imaging of the Golgi apparatus by 3D confocal and STED microscopy. Cer-SiR is nontoxic at concentrations as high as 2 μM and does not perturb the mobility of Golgi-resident enzymes or the traffic of cargo from the endoplasmic reticulum through the Golgi and to the plasma membrane.

Masked rhodamine dyes of five principal colors revealed by photolysis of a 2-diazo-1-indanone caging group: synthesis, photophysics, and light microscopy applications

Caged rhodamine dyes (Rhodamines NN) of five basic colors were synthesized and used as "hidden" markers in subdiffractional and conventional light microscopy. These masked fluorophores with a 2-diazo-1-indanone group can be irreversibly photoactivated, either by irradiation with UV- or violet light (one-photon process), or by exposure to intense red light (λ∼750 nm; two-photon mode). All dyes possess a very small 2-diazoketone caging group incorporated into the 2-diazo-1-indanone residue with a quaternary carbon atom (C-3) and a spiro-9H-xanthene fragment. Initially they are non-colored (pale yellow), non-fluorescent, and absorb at λ=330-350 nm (molar extinction coefficient (ε)≈10(4)  M(-1)  cm(-1)) with a band edge that extends to about λ=440 nm. The absorption and emission bands of the uncaged derivatives are tunable over a wide range (λ=511-633 and 525-653 nm, respectively). The unmasked dyes are highly colored and fluorescent (ε=3-8×10(4)  M(-1)  cm(-1) and fluorescence quantum yields (ϕ)=40-85% in the unbound state and in methanol). By stepwise and orthogonal protection of carboxylic and sulfonic acid groups a highly water-soluble caged red-emitting dye with two sulfonic acid residues was prepared. Rhodamines NN were decorated with amino-reactive N-hydroxysuccinimidyl ester groups, applied in aqueous buffers, easily conjugated with proteins, and readily photoactivated (uncaged) with λ=375-420 nm light or intense red light (λ=775 nm). Protein conjugates with optimal degrees of labeling (3-6) were prepared and uncaged with λ=405 nm light in aqueous buffer solutions (ϕ=20-38%). The photochemical cleavage of the masking group generates only molecular nitrogen. Some 10-40% of the non-fluorescent (dark) byproducts are also formed. However, they have low absorbance and do not quench the fluorescence of the uncaged dyes. Photoactivation of the individual molecules of Rhodamines NN (e.g., due to reversible or irreversible transition to a "dark" non-emitting state or photobleaching) provides multicolor images with subdiffractional optical resolution. The applicability of these novel caged fluorophores in super-resolution optical microscopy is exemplified.

Twinkle, twinkle little star: photoswitchable fluorophores for super-resolution imaging

Photoswitchable fluorescent probes are key elements of newly developed super-resolution fluorescence microscopy techniques that enable far-field interrogation of biological systems with a resolution of 50 nm or better. In contrast to most conventional fluorescence imaging techniques, the performance achievable by most super-resolution techniques is critically impacted by the photoswitching properties of the fluorophores. Here we review photoswitchable fluorophores for super-resolution imaging with discussion of the fundamental principles involved, a focus on practical implementation with available tools, and an outlook on future directions.

Super-resolution molecular and functional imaging of nanoscale architectures in life and materials science

Super-resolution (SR) fluorescence microscopy has been revolutionizing the way in which we investigate the structures, dynamics, and functions of a wide range of nanoscale systems. In this review, I describe the current state of various SR fluorescence microscopy techniques along with the latest developments of fluorophores and labeling for the SR microscopy. I discuss the applications of SR microscopy in the fields of life science and materials science with a special emphasis on quantitative molecular imaging and nanoscale functional imaging. These studies open new opportunities for unraveling the physical, chemical, and optical properties of a wide range of nanoscale architectures together with their nanostructures and will enable the development of new (bio-)nanotechnology.

Synthesis and Properties of Heavy Chalcogen Analogues of the Texas Reds and Related Rhodamines

Analogues of Texas red incorporating the heavy chalcogens S, Se, and Te atoms in the xanthylium core were prepared from the addition of aryl Grignard reagents to appropriate chalcogenoxanthone precursors. The xanthones were prepared via directed metalation of amide precursors, addition of dichalcogenide electrophiles, and electrophilic cyclization of the resulting chalcogenides with phosphorus oxychloride and triethylamine. The Texas red analogues incorporate two fused julolidine rings containing the rhodamine nitrogen atoms. Analogues containing two "half-julolidine" groups (a trimethyltetrahydroquinoline) and one julolidine and one "half-julolidine" were also prepared. The photophysics of the Texas red analogues were examined. The S-analogues were highly fluorescent, the Se-analogues generated single oxygen (1O2) efficiently upon irradiation, and the Te-analogues were easily oxidized to rhodamines with the telluroxide oxidation state. The tellurorhodamine telluroxides absorb at wavelengths ≥690 nm and emit with fluorescence maxima >720 nm. A mesityl-substituted tellurorhodamine derivative localized in the mitochondria of Colo-26 cells (a murine colon carcinoma cell line) and was oxidized in vitro to the fluorescent telluroxide.

Polar red-emitting rhodamine dyes with reactive groups: synthesis, photophysical properties, and two-color STED nanoscopy applications

The synthesis, reactivity, and photophysical properties of new rhodamines with intense red fluorescence, two polar residues (hydroxyls, primary phosphates, or sulfonic acid groups), and improved hydrolytic stability of the amino-reactive sites (NHS esters or mixed N-succinimidyl carbonates) are reported. All fluorophores contain an N-alkyl-1,2-dihydro-2,2,4-trimethylquinoline fragment, and most of them bear a fully substituted tetrafluoro phenyl ring with a secondary carboxamide group. The absorption and emission maxima in water are in the range of 635-639 and 655-659 nm, respectively. A vastly simplified approach to red-emitting rhodamines with two phosphate groups that are compatible with diverse functional linkers was developed. As an example, a phosphorylated dye with an azide residue was prepared and was used in a click reaction with a strained alkyne bearing an N-hydroxysuccinimid (NHS) ester group. This method bypasses the undesired activation of phosphate groups, and gives an amphiphilic amino-reactive dye, the solubility and distribution of which between aqueous and organic phases can be controlled by varying the pH. The presence of two hydroxyl groups and a phenyl ring with two carboxyl residues in the dyes with another substitution pattern is sufficient for providing the hydrophilic properties. Selective formation of a mono-N-hydroxysuccinimidyl ester from 5-carboxy isomer of this rhodamine is reported. The fluorescence quantum yields varied from 58 to 92% for free fluorophores, and amounted to 18-64% for antibody conjugates in aqueous buffers. The brightness and photostability of these fluorophores facilitated two-color stimulated emission depletion (STED) fluorescence nanoscopy of biological samples with high contrast and minimal background. Selecting a pair of fluorophores with absorption/emission bands at 579/609 and 635/655 nm enabled two-color channels with low cross-talk and negligible background at approximately 40 nm resolution.

4-Trifluoromethyl-substituted coumarins with large Stokes shifts: synthesis, bioconjugates, and their use in super-resolution fluorescence microscopy

Bright and photostable fluorescent dyes with large Stokes shifts are widely used as sensors, molecular probes, and light-emitting markers in chemistry, life sciences, and optical microscopy. In this study, new 7-dialkylamino-4-trifluoromethylcoumarins have been designed for use in bioconjugation reactions and optical microscopy. Their synthesis was based on the Stille reaction of 3-chloro-4-trifluoromethylcoumarins and available (hetero)aryl- or (hetero)arylethenyltin derivatives. Alternatively, the acylation of 2-trifluoroacetyl-5-dialkylaminophenols with available (hetero)aryl- or (hetero)arylethenylacetic acids followed by intramolecular condensation afforded coumarins with 3-(hetero)aryl or 3-[2-(hetero)aryl]ethenyl groups. Hydrophilic properties were provided by the introduction of a sulfonic acid residue or by phosphorylation of a primary hydroxy group attached at C-4 of the 2,2,4-trimethyl-1,2-dihydroquinoline fragment fused to the coumarin fluorophore. For use in immunolabeling procedures, the dyes were decorated with an (activated) carboxy group. The positions of the absorption and emission maxima vary in the ranges 413-480 and 527-668 nm, respectively. The phosphorylated dye, 9,CH=CH-2-py,H, with the 1-(3-carboxypropyl)-4-hydroxymethyl-2,2-dimethyl-1,2-dihydroquinoline fragment fused to the coumarin fluorophore bearing the 3-[2-(2-pyridyl)ethenyl] residue (absorption and emission maxima at 472 and 623 nm, respectively) was used in super-resolution light microscopy with stimulated emission depletion and provided an optical resolution better than 70 nm with a low background signal. As a result of their large Stokes shifts, good fluorescence quantum yields, and adequate photostabilities, phosphorylated coumarins enable two-color imaging (using several excitation sources and a single depletion laser) to be combined with subdiffractional optical resolution.

Carborhodol: a new hybrid fluorophore obtained by combination of fluorescein and carbopyronine dye cores

Asymmetric hybrid fluorophores are built from the structural elements of two (or even more) symmetric dyes and can develop valuable new features which their parents do not possess. A new hybrid carborhodol dye was obtained by the combination of fluorescein and carbopyronine fluorophores. The brightly fluorescent hybrid dye with a linker and reactive group was prepared in 12 steps with overall yield of 1.6%. In aqueous solutions, it has absorption and emission maxima at 586 and 613 nm, respectively. Antibodies labeled with a carborhodol dye possess broad absorption and emission bands so that the effective Stokes shift is increased (compared with small Stokes shifts of the parent dyes) and the fluorescence quantum yield of 39% at a degree of labeling of 5.2. Two samples of secondary antibodies labeled with carborhodol and the benchmark red-emitting rhodamine dye (KK114) were used in two-color imaging experiments with excitation at 514-532 (carborhodol dye) and 633-640 nm (KK114). When emitted light was detected above 650 nm, the novel carborhodol dye provided a lower crosstalk than spectrally similar emitters (e. g., Atto594; crosstalk 40-60% with KK114 under the same conditions). The optical resolution of ca. 80 nm was attained using the new dye in stimulated emission depleted (STED) microscopy. The relatively short fluorescence lifetime in conjugates with antibodies (τ = 1.2-1.6 ns) suggests the possibility of dual FLIM with numerous dyes having τ values in the range of 3-5 ns. All of these features make the carborhodol fluorophore a valuable addition to the family of the red-emitting fluorescent dyes.