Colorimetric chemosensors for the selective detection of arsenite over arsenate anions in aqueous medium: Application in environmental water samples and DFT studies

Novel organic receptors N3R1- N3R3 were developed for the selective colorimetric recognition of arsenite ions in the organo-aqueous media. In the 50% aq. acetonitrile media and 70% aq. DMSO media, receptors N3R2 and N3R3 showed specific sensitivity and selectivity towards arsenite anions over arsenate anions. Receptor N3R1 showed discriminating recognition of arsenite in the 40% aq. DMSO medium. All three receptors formed a 1:1 complex with arsenite and stable for a pH range of 6-12. The receptors N3R2 and N3R3 achieved a detection limit of 0.008 ppm (8 ppb) and 0.0246 ppm, respectively, for arsenite. Initial hydrogen bonding on binding with the arsenite followed by the deprotonation mechanism was well supported by the UV-Vis titration, ¹H- NMR titration, electrochemical studies, and the DFT studies. Colorimetric test strips were fabricated using N3R1- N3R3 for the on-site detection of arsenite anion. The receptors are also employed for sensing arsenite ions in various environmental water samples with high accuracy.

Citric Acid-Based Intrinsic Band-Shifting Photoluminescent Materials

Citric acid, an important metabolite with abundant reactive groups, has been demonstrated as a promising starting material to synthesize diverse photoluminescent materials including small molecules, polymers, and carbon dots. The unique citrate chemistry enables the development of a series of citric acid-based molecules and nanomaterials with intriguing intrinsic band-shifting behavior, where the emission wavelength shifts as the excitation wavelength increases, ideal for chromatic imaging and many other applications. In this review, we discuss the concept of "intrinsic band-shifting photoluminescent materials", introduce the recent advances in citric acid-based intrinsic band-shifting materials, and discuss their potential applications such as chromatic imaging and multimodal sensing. It is our hope that the insightful and forward-thinking discussion in this review will spur the innovation and applications of the unique band-shifting photoluminescent materials.

New white light-emitting halochromic stilbenes with remarkable quantum yields and aggregation-induced emission

Highly efficient single-component white light emitters (SWLEs), are attractive candidates for the simple and cost-effective fabrication of high-performance lighting devices. This study introduced a donor–π–acceptor and a donor–π–donor stilbene-based chromophores, representing pH-responsive fluorescence. The emitters showed yellow and green fluorescence in their neutral form. At the same time, protonation of the chromophores caused blue fluorescence color with a strong hypsochromic shift. The white light emission (WLE) for these chromophores was observed at approximately pH  3 due to the simultaneous presence of the neutral and protonated forms of the chromophores, covering almost all the emission spectra in the visible region (400–700 nm). These chromophores presented exceptional white light quantum yields (Φ) between 31 and 54%, which was desirable for producing white light-emitting devices. Density functional theory (DFT) and time-dependent (TD)-DFT were applied to study the structural and electronic properties of the chromophores.

Aggregation-Induced Emission-Active Gels: Fabrications, Functions, and Applications

Chromophores that exhibit aggregation-induced emission (i.e., aggregation-induced emission luminogens [AIEgens]) emit intense fluorescence in their aggregated states, but show negligible emission as discrete molecular species in solution due to the changes in restriction and freedom of intramolecular motions. As solvent-swollen quasi-solids with both a compact phase and a free space, gels enable manipulation of intramolecular motions. Thus, AIE-active gels have attracted significant interest owing to their various distinctive properties and promising application potential. Herein, a comprehensive overview of AIE-active gels is provided. The fabrication strategies employed are detailed, and the applications of AIEgens are summarized. In addition, the gel functions arising from the AIE moieties are revealed, along with their structure-property relationships. Furthermore, the applications of AIE-active gels in diverse areas are illustrated. Finally, ongoing challenges and potential means to address them are discussed, along with future perspectives on AIE-active gels, with the overall aim of inspiring research on novel materials and ideas.

Aggregation-Induced Emission Fluorescent Gels: Current Trends and Future Perspectives

The development of fluorescent gels, if not the current focus, is at the center of recent efforts devoted to the invention of a new generation of gels. Fluorescent gels have numerous properties that are intrinsic to the gel structure, with additional light-emitting properties making them attractive for different applications. This review focuses on current studies associated with the development of fluorescent gels using aggregation-induced emission fluorophores (AIEgens) to ultimately suggest new directions for future research. Here, we discuss major drawbacks of the methodologies used frequently for the fabrication of fluorescent gels using traditional fluorophores compared to those using AIEgens. The fabrication strategies to develop AIE-based fluorescent gels, including physical mixing, soaking, self-assembly, noncovalent interactions, and permanent chemical reactions, are discussed thoroughly. New and recent findings on developing AIE-active gels are explained. Specifically, physically prepared AIE-based gels including supramolecular, ionic, and chemically prepared AIE-based gels are discussed. In addition, the intrinsic fluorescent properties of natural gels, known as clustering-triggered fluorescent gel, and new and recent relevant findings published in peer-reviewed journals are explained. This review also revealed the biomedical applications of AIE-based fluorescent hydrogels including drug delivery, biosensors, bioimaging, and tissue engineering. In conclusion, the current research situation and future directions are identified.

A novel donor-π-acceptor halochromic 2,6-distyrylnaphthalene chromophore: synthesis, photophysical properties and DFT studies

In this study a new 2,6-distyryl naphthalene [2-((4-((E)-2-(6-((E)-2,4-bis(methylsulfonyl)styryl)naphthalen-2-yl)vinyl)phenyl)(ethyl)amino)ethan-1-ol; ASDSN] was synthesized successfully using Heck chemistry as the main reaction. The ASDSN compound is a donor-pi-acceptor (D-π-A) conjugated system with amino as electron donating and sulfonyl as electron withdrawing groups. The UV-vis absorption of ASDSN was observed in the range of 403-417 nm with high molar extinction coefficients (ε = 15 300-56 200 M-1 cm-1) in some different solvents. This new fluorescent 2,6-distyryl naphthalene compound emits in the yellow region of the visible spectrum (557 nm) with Stokes shifts of 5930 cm-1. ASDSN is a pH-responsive fluorescence compound that shows yellow fluorescence in neutral form and blue fluorescence in the protonated form. A white light emission (WLE) for the chromophore was observed at pH = 3.0. The ASDSN chromophore presented a satisfactory white light quantum yield (Φ) of 13% which was desirable for producing white light emitting devices. Density functional theory (DFT) and time-dependent (TD)-DFT were applied to study structural and electronic properties of the chromophore.

Wide-Antimicrobial Spectrum of Picolinium Salts

Nosocomial infections, which greatly increase morbidity among hospitalized patients, together with growing antibiotic resistance still encourage many researchers to search for novel antimicrobial compounds. Picolinium salts with different lengths of alkyl chains (C12, C14, C16) were prepared by Menshutkin-like reaction and evaluated with respect to their biological activity, i.e., lipophilicity and critical micellar concentration. Picolinium salts with C14 and C16 side chains achieved similar or even better results when in terms of antimicrobial efficacy than benzalkoniums; notably, their fungicidal efficiency was substantially more potent. The position of the methyl substituent on the aromatic ring does not seem to affect antimicrobial activity, in contrast to the effect of length of the N-alkyl chain. Concurrently, picolinium salts exhibited satisfactory low cytotoxicity against mammalian cells, i.e., lower than that of benzalkonium compounds, which are considered as safe.

Single-Molecular White-Light Emitters and Their Potential WOLED Applications

White organic light-emitting diodes (WOLEDs) are superior to traditional incandescent light bulbs and compact fluorescent lamps in terms of their merits in ensuring pure white-light emission, low-energy consumption, large-area thin-film fabrication, etc. Unfortunately, WOLEDs based on multilayered or multicomponent (red, green, and blue (RGB)) emissive layers can suffer from some remarkable disadvantages, such as intricate device fabrication and voltage-dependent emission color, etc. Single molecules, which can emit white light, can be used to replace multiple emitters, leading to a simplified fabrication process, stable and reproducible WOLEDs. Recently, the performance of WOLEDs by using single molecules is catching up with that of the state-of-the-art devices fabricated by multicomponent emitters. Therefore, an increasing attention has been paid on single white-light-emitting materials for efficient WOLEDs. In this review, different mechanisms of white-light emission from a single molecule and the performance of single-molecule-based WOLEDs are collected and expounded, hoping to light up the interesting subject on single-molecule white-light-emitting materials, which have great potential as white-light emitters for illumination and lighting applications in the world.

Physically Cross-Linked Hydrogel Based on Phenyl-1,3,5-triazine: Soft Scaffold with Aggregation-Induced Emission

A phenyltriazine compound has been used for the first time as a monomer in the construction of a hydrogel. This physically cross-linked soft material showed blue fluorescence when excited under UV-light. Polymer formation and intermolecular H-bonds arising from triazine moieties operate as aggregation-induced emission (AIE) mechanisms. The combination of soft materials and AIE properties expands the applications of these materials. As a proof of concept, two luminescent dyes have been incorporated into the hydrogel to produce a white-light-emitting material.

Stretchable and Self-Healable Conductive Hydrogels for Wearable Multimodal Touch Sensors with Thermoresponsive Behavior

Multifunctional hydrogels with properties including transparency, flexibility, self-healing, and high electrical conductivity have attracted great attention for their potential application to soft electronic devices. The presence of an ionic species can make hydrogels conductive in nature. However, the conductivity of hydrogels is often influenced by temperature, due to the change of the internal nano/microscopic structure when temperature reaches the sol-gel phase transition temperature. In this regard, by introducing a novel surface-capacitive sensor device based on polymers with lower critical solution temperature (LCST) behavior, near-perfect stimulus discriminability of touch and temperature may be realized. Here, we demonstrate a multimodal sensor that can monitor the location of touch points and temperature simultaneously, using poly(N-isopropylacrylamide) (PNIPAAm) in hybrid poly(vinyl alcohol) (PVA) and sodium tetraborate decahydrate cross-linked hydrogels doped with poly(sodium acrylate) (SA) [w/w/w = 5:2.7:1-3]. This multimodal sensor exhibits a response time of 0.3 s and a temperature coefficient of resistance of -0.58% K^-1 from 20 to 40 °C. In addition, the LCST behavior of PNIPAAm-incorporated PVA/SA gels is investigated. Incorporation of LCST polymers into high-end hydrogel systems may contribute to the development of temperature-dependent soft electronics that can be applied in smart windows.

Synergistic Tricolor Emission-Based White Light from Supramolecular Organic-Inorganic Hybrid Gel

The development of engineered hybrid systems by encapsulating nanoparticles in gel scaffolds and their synergistic effects are highly crucial for the fabrication of advanced functional materials. Herein, a series of dipeptides containing an aromatic amino acid at the N-terminal and an aliphatic amino acid at the C-terminal were synthesized and studied. Among them, only the dipeptide l-Phe-l-Val can form both hydro- and organogelator, depending on the N- and C-terminal protecting groups. The organogel shows bright blue emission under 366 nm UV irradiation; however, the hydrogel does not show such blue emission. Such kind of emission may be due to the self-assembly and high degree of aggregation in the gel state of the phenyl ring. The blue-emitting organogel efficiently encapsulates green emission source CdSe quantum dots and red emission source LD 700 perchlorate dye. The resulting organic-inorganic hybrid gel exhibits white light emission due to the synergistic effect under 366 nm UV irradiation.

Single Chromophore-Based White-Light-Emitting Hydrogel with Tunable Fluorescence and Patternability

Bioluminescence is widespread in nature such as the jellyfish, which inspires scientists to design polymer hydrogels with tunable fluorescence. However, it remains a big challenge to develop white-light-emitting hydrogels with local tunability of the fluorescent behavior. Herein, we report a white fluorescent hydrogel prepared by one-pot micellar copolymerization of hydrophilic acrylamide and hydrophobic single donor-acceptor chromophore monomer, in which the unimer and the dimer of the chromophore coexist and generate high- and low-energy emission, respectively, under excitation. The fluorescent behavior of the hydrogel can be well tuned by phototreatment or heat treatment that induces unimer-to-dimer transformation of the chromophore and thus variation of the fluorescent color from blue to white and then to yellow. The fluorescence can also be reversibly switched off by forming terpyridine-Cu²⁺ chelate complexes and recovered by using chelating agent to extract the Cu²⁺ ions out of the gel matrix. These properties afford patterning the fluorescent hydrogel, which is transparent under daylight yet shows the pattern under ultraviolet light. These patterned fluorescent hydrogels should find applications in protected message display for improved information security.

Application of a Novel "Turn-on" Fluorescent Material to the Detection of Aluminum Ion in Blood Serum

A novel "turn-on" fluorescent bioprobe, 1,2,3,4,5-penta(4-carboxyphenyl)pyrrole sodium salt (PPPNa), with aggregation-enhanced emission characteristics was synthesized for the in situ quantitative detection of Al³⁺ in serum. It exhibited a high selectivity to Al³⁺ in both simulated serum and fetal calf serum with no interferences from other metal ions or serum components observed and no isolation required. A weak interaction between PPPNa and serum albumin was found, which caused no interference, but enhanced fluorescence response of PPPNa to Al³⁺ and improved detection sensitivity. The limit of detection was determined to be 1.50 μmol/L Al³⁺ in phosphate-buffered saline solution containing 33 μg/mL bovine serum albumin (BSA) and decreased to 0.98 μmol/L as BSA concentration increased to 100 μg/mL. The fluorescence "turn-on" mechanism of the PPPNa probe to detect Al³⁺ was proposed. A bidentate complex is formed between the carboxy group of PPPNa and Al³⁺, causing the photoluminescence (PL) emission enhancement by aggregation. BSA chains further strengthen the stacking compactness of the aggregates of PPPNa and Al³⁺ and consequently enhance the PL emission of PPPNa by further promoting the restriction of intramolecular rotation of the phenyl ring. Its application to the in situ Al³⁺ was successfully demonstrated with HeLa cells and NIH 3T3 cells. The low cytotoxicity and highly selective response of PPPNa to Al³⁺ endow its great potentials to in vivo detecting and imaging of Al³⁺ as well as an absorbent of Al³⁺.

White Light Emission from Cucurbituril-Based Host-Guest Interaction in the Solid State: New Function of the Macrocyclic Host

Energy transfer and interchange are central for fabricating white light-emitting organic materials. However, increasing the efficiency of light energy transfer remains a considerable challenge because of the occurrence of "cross talk". In this work, by exploiting the unique photophysical properties of cucurbituril-triggered host-guest interactions, the two complementary luminescent colors blue and yellow for white light emission were independently obtained from a single fluorophore dye rather than energy transfer. Further study suggested that the rigid cavity of cucurbiturils efficiently prevented the aggregation of the dye and improved its thermal stability in the solid state by providing a regular nanosized fence for each encapsulated dye molecule. As a result, a novel macrocycle-assisted supramolecular approach for obtaining solid, white light-emitting organic materials with low cost, high efficiency, and easy scale-up was successfully demonstrated.

Heparin triggered dose dependent multi-color emission switching in water: a convenient protocol for heparinase I estimation in real-life biological fluids

Oligo(p-phenylenevinylene) based bis-pyridinium derivatives show 'ratiometric' detection of heparin in water. For the first time, we present a dose-dependent, multi-color emission switching in the presence of heparin. The reversible self-assembly of probes with heparin as the stimulus is also exploited for the screening of heparinase I enzyme.

Nanomolar Level Detection of Uric Acid in Blood Serum and Pest-Infested Grain Samples by an Amphiphilic Probe

A pyrene based amphiphilic receptor has been utilized in the nanomolar detection of uric acid at physiological pH in water. The compound shows a unique concentration-dependent modulation in optical response toward uric acid. In intramolecular/static excimer form (low concentration range), it displays a ratiometric response, while a "turn-off" sensing is observed specifically in the presence of intermolecular/dynamic excimer (high concentration range). The present protocol is then employed for the estimation of uric acid in blood serum samples of healthy individuals. Bland-Altman analysis in comparison to clinically approved uricase assay indicated the high accuracy of the present method. Additionally, the extent of insect infestation in stored grain samples was determined by measuring the uric acid content of their aqueous extracts. Low-cost color strips were developed for on-site detection of uric acid without involving any sophisticated instrument or trained personnel.

Printable Fluorescent Hydrogels Based on Self-Assembling Peptides

Fluorescent hydrogels (FH) have a variety of potential applications in the field of soft electronics. However, fabrication of mechanically stable and printable fluorescent hydrogels remains challenging. Here, we report a kind of fluorescent hydrogel based on the co-assembly of peptide motif and transition metal ions. The metal ions are captured in the hydrogel network at specific positions through covalently linked ligands on the peptide hydrogelators. This efficiently prevents the aggregation and self-quenching of organometallic chromophores. In addition, the formation of metal-ligand complexes introduces additional interactions to stabilize the hydrogel network, making the FH even more stable after the incorporation of metal ions. The FH is optically transparent but highly fluorescent. By using three different metal ions, the white light fluorescent supramolecular hydrogel has been achieved. As a proof-of-principle, we demonstrate the printability of the hydrogels to various patterns. We anticipate that with the improved fluorescent performance and stability, this kind of FH can find broad applications in extrusion-based 3D printing for the construction of soft electronics.

Supramolecularly Engineered π-Amphiphile

This article describes self-assembly of supramolecularly engineered naphthalene-diimide (NDI)-derived amphiphiles NDI-1 and NDI-2. They have the same hydrophobic/hydrophilic balance but merely differ by a single functional group, amide or ester. They exhibit distinct self-assembly in water; NDI-1 forms hydrogel, which upon aging forms crystals, whereas NDI-2 forms micelles as revealed by in-depth structural analysis using cryo-TEM, dynamic light scattering, and small-angle X-ray scattering studies. These results suggest that the H-bonding among the amide groups fully regulates the self-assembly by overruling the packing parameters. Further, the present study elucidates sharp lower critical solution temperature exhibited by these π-amphiphiles, which has been extensively studied for many important applications of water-soluble polymers but hardly known in the literature of small-molecule surfactants. Control experiments with the same water-soluble hydrophilic wedge did not show such a property, confirming this to be a consequence of the supramolecular polymerization by extended amide-amide H-bonding and not inherent to the structure of the hydrophilic wedge containing oligo-oxyethylene chains.

Rationally Developed Organic Salts of Tolfenamic Acid and Its β-Alanine Derivatives for Dual Purposes as an Anti-Inflammatory Topical Gel and Anticancer Agent

A new series of primary ammonium monocarboxylate (PAM) salts of a nonsteroidal anti-inflammatory drug (NSAID), namely, tolfenamic acid (TA), and its β-alanine derivatives were generated. Nearly 67 % of the salts in the series showed gelling abilities with various solvents, including water (biogenic solvent) and methyl salicylate (typically used for topical gel formulations). Gels were characterized by rheology, electron microscopy, and so forth. Structure-property correlations based on single-crystal and powder XRD data of several gelator and nongelator salts revealed intriguing insights. Studies (in vitro) on an aggressive human breast cancer cell line (MDA-MB-231) with the l-tyrosine methyl ester salt of TA (S7) revealed that the hydrogelator salt was more effective at killing cancer cells than the mother drug TA (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay); displayed better anti-inflammatory activity compared with that of TA (prostaglandin E₂ assay); could be internalized within the cancer cells, as revealed by fluorescence microscopy; and inhibited effectively migration of the cancer cells. Thus, the easily accessible ambidextrous gelator salt S7 can be used for two purposes: as an anti-inflammatory topical gel and as an anticancer agent.

Dynamic fluorescence quenching by 2,4,6-trinitrophenol in the voids of an aggregation induced emission based fluorescent probe

PY-DNSfollows dynamic fluorescence quenching with TNP to elicit a linear change in fluorescence quenching over eight orders of concentration of TNP (10⁻¹³–10⁻⁵M).

Wavelength-selective and high-contrast multicolour fluorescence photoswitching in a mixture of photochromic nanoparticles

Wavelength-selective and high-contrast multicolour fluorescence photoswitching was successfully demonstrated based on the nonlinear fluorescence quenching in photochromic nanoparticles.

White-light emission from simple AIE–ESIPT-excimer tripled single molecular system

A rationally designed simple organic molecule exhibits white-light emission in methanol/water and acetonitrile/water mixtures.

Anion-controlled dimer distance induced unique solid-state fluorescence of cyano substituted styrene pyridinium

Molecular packing arrangements play a key role in dominating the photophysical properties of luminophores in aggregated state but fine control of the molecular packing is a great challenge. This article describes a unique cyano substituted styrene pyridinium with interesting solid-state fluorescence that can be finely tuned by simple change of counteranions. The dilute solutions of the organic salts (PyCl, PyNO₃, PyOTs and PyPh₄B) exhibit very weak fluorescence. The crystals of the organic salts (PyCl, PyNO₃, and PyOTs) show much enhanced fluorescence compared with their dilute solutions. It is interesting that the emissions changed from bluish-green to deep-blue and fluorescence quantum yields increase from 2.5% to 13.1% with the increasing of steric hindrance of the anions from chloridion, nitrate, to p-toluenesulfonate. Crystal and DFT studies reveal that the enhanced fluorescence is ascribed to the formation of dimers and bigger anions induce larger molecular separation in dimers. Tetraphenylboron anion with very large steric hindrance impedes the formation of dimers and thus results in non-fluorescent salt (PyPh₄B). Meanwhile, this unique dimeric packing endows the crystal of PyNO₃ with anisotropic fluorescence.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Quantitation of Albumin in Serum Using "Turn-on" Fluorescent Probe with Aggregation-Enhanced Emission Characteristics

An aggregation-enhanced emission active luminogen named as sodium 4,4'4″-(3,4-diphenyl-1H-pyrrole-1,2,5-triyl)tribenzoate (DP-TPPNa) with propeller construction was synthesized and developed as a "turn on" fluorescent probe for in situ quantitation of albumin in blood serum. The DP-TPPNa fluorescence intensity was linearly correlated with the concentration of two serum albumins, bovine serum albumin (BSA) and human serum albumin (HSA), in pure PBS buffer in the ranges of 2.18-70 and 1.68-100 μg/mL, respectively. The detection limits were as low as 2.18 μg/mL for BSA and 1.68 μg/mL for HSA. The response time of fluorescence to serum albumin (SA) was very short (below 6 s), which achieved real-time detection. It also showed high selectivity to SA because other components in serum barely interfere with the detection of DP-TPPNa to SA, enabling in situ quantitative detection of SA without isolation from serum. DP-TPPNa was successfully applied for the quantitative detection of BSA in fetal bovine serum. The mechanism of fluorescent turn-on behavior was elucidated utilizing an unfolding process induced by guanidine hydrochloride, which revealed a capture process via selective hydrophobic interaction and hydrogen bonding between luminogen and SA.

Multifarious facets of sugar-derived molecular gels: molecular features, mechanisms of self-assembly and emerging applications

The remarkable capability of nature to design and create excellent self-assembled nano-structures, especially in the biological world, has motivated chemists to mimic such systems with synthetic molecular and supramolecular systems. The hierarchically organized self-assembly of low molecular weight gelators (LMWGs) based on non-covalent interactions has been proven to be a useful tool in the development of well-defined nanostructures. Among these, the self-assembly of sugar-derived LMWGs has received immense attention because of their propensity to furnish biocompatible, hierarchical, supramolecular architectures that are macroscopically expressed in gel formation. This review sheds light on various aspects of sugar-derived LMWGs, uncovering their mechanisms of gelation, structural analysis, and tailorable properties, and their diverse applications such as stimuli-responsiveness, sensing, self-healing, environmental problems, and nano and biomaterials synthesis.

Tuning of multiple luminescence outputs and white-light emission from a single gelator molecule through an ESIPT coupled AIEE process

A single gelator molecule (1) shows an ESIPT coupled AIEE process for generating multiple luminescent colors, including white-light, with varying aggregation as a function of the water content in a THF–water mixture. Luminescent property of 1 is retained in gel as well as in solid state.

Role of synergistic π–π stacking and X–H⋯Cl (X = C, N, O) H-bonding interactions in gelation and gel phase crystallization

Gel phase crystallization in a transparent gel via synergistic non-covalent interactions has been reported along with various remarkable features.

Orotic acid as a useful supramolecular synthon for the fabrication of an OPV based hydrogel: stoichiometry dependent injectable behavior

A multi-stimuli responsive, vesicular, two-component, injectable hydrogel has been reported.

Aggregation-induced emission: the whole is more brilliant than the parts

"United we stand, divided we fall."--Aesop. Aggregation-induced emission (AIE) refers to a photophysical phenomenon shown by a group of luminogenic materials that are non-emissive when they are dissolved in good solvents as molecules but become highly luminescent when they are clustered in poor solvents or solid state as aggregates. In this Review we summarize the recent progresses made in the area of AIE research. We conduct mechanistic analyses of the AIE processes, unify the restriction of intramolecular motions (RIM) as the main cause for the AIE effects, and derive RIM-based molecular engineering strategies for the design of new AIE luminogens (AIEgens). Typical examples of the newly developed AIEgens and their high-tech applications as optoelectronic materials, chemical sensors and biomedical probes are presented and discussed.