Far-Infrared-Assisted Preparation of a Graphene-Nickel Nanoparticle Hybrid for the Enrichment of Proteins and Peptides

Rational design, synthesis, and applications of carbon-assisted dispersive Ni-based composites

Herein, we review recent developments in the rational design and engineering of various carbon-assisted dispersive nickel-based composites, and boosted properties for protein adsorption and nitroaromatics reduction.

Nickel nanoparticle-decorated reduced graphene oxide/WO3 nanocomposite - a promising candidate for gas sensing

We report for the first time the combination of WO3 sensing elements with a non-noble metal-carbon composite, namely a nickel metal nanoparticle-carbon composite (Ni@rGO). Previous work with WO3 had used either NiO (as part of the WO3 lattice), solely carbon, Pd-surface decorated WO3 (Pd@WO3), or Pd or Pt@carbon@WO3. We demonstrate the gas response for pure WO3, rGO/WO3 and Ni@rGO/WO3 sensing elements towards NO2 and acetone in air as well as towards CO in N2. The addition of 0.35 wt % Ni@rGO composite to WO3 enables the increase of the sensory response by more than 1.6 times for NO2 vapors. The gas response towards acetone using 0.35 wt % Ni@rGO/WO3 composite was 1.5 times greater for 3500 ppm than for 35,000 ppm acetone. For 0.35 wt % Ni@rGO/WO3 composite and CO gas, a response time (T res) of 7 min and a recovery time (T rec) of 2 min was determined.

A facile template method to fabricate one-dimensional Fe3O4@SiO2@C/Ni microtubes with efficient catalytic and adsorption performance

The Fe3O4@SiO2@C/Ni microtubes were well constructed with MoO3 microrods as sacrificing template, which manifested excellent performance as both catalyst and adsorbent.

Far Infrared-assisted Sample Extraction and Solvent Removal for Capillary Electrophoretic Determination of the Bioactive Constituents in Citri Reticulatae Pericarpium

Background:

Sample preparation is crucially important for the capillary electrophoretic measurement of the bioactive constituents in Citri Reticulatae Pericarpium because conventional solvent extraction is time-consuming and the solvent peaks seriously interfere with the measured capillary electropherograms.

Objective:

The objective of the present study is to establish far infrared-assisted sample preparation approaches for the analysis of Citri Reticulatae Pericarpium.

Methods:

Synephrine and hesperidin in Citri Reticulatae Pericarpium were determined by capillary electrophoresis in combination with far infrared-assisted sample extraction and solvent removal.

Results:

The effects of detection potentials, irradiation times and the voltages applied to the infrared generator were investigated to acquire the optimal assay conditions. Synephrine and hesperidin could be well separated within 6 min at a separation voltage of 9 kV in an alkaline borate solution. Satisfactory linearity was observed over the concentration range of 0.001 to 1 mM with the detection limits of 0.43 and 0.52 μM for synephrine and hesperidin, respectively. The results exhibited that far infrared irradiations could enhance the efficiencies of sample extraction and solvent removal during the sample preparation of Citri Reticulatae Pericarpium. The extraction time was significantly reduced to 6 min while the interference of the solvent peaks towards the electropherograms was eliminated.

Conclusion:

Far infrared-accelerated extraction and solvent removal were employed in the capillary electrophoretic determination of the bioactive constituents in Citri Reticulatae Pericarpium with satisfactory results. The ease, simplicity, efficiency and low cost of the novel sample preparation approaches indicate they may find a wide range of applications.

Far infrared-assisted removal of extraction solvent for capillary electrophoretic determination of the bioactive constituents in Plumula Nelumbinis

Far infrared radiation was employed in the rapid removal of the solvents in the extracts of Plumula Nelumbinis and standard mixture solutions to prevent the interference of the solvent peaks toward their capillary electrophoretic measurements. The sample solutions in small vials were exposed to far infrared ray at 60°C for 3 min to remove solvent. The dried samples in the vials were each dissolved into running buffer with the aid of ultrasonication for capillary electrophoresis analysis. The far infrared-assisted solvent removal approach was sucessfully applied in the rapid determination of neferine, liensinine, isoliensinine, rutin and hyperoside in Plumula Nelumbinis. The five analytes could be well separated within 12 min in a 40 cm long fused silica capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2). The results indicated that the interferences of the solvent peaks in the capillary electropherograms of the herbal drugs were eliminated completely.

Formation of Fe3O4@C/Ni microtubes for efficient catalysis and protein adsorption

In the recent years, the fabrication of functional nanostructures with multicomponent has received considerable attention due to their exceptional properties. Herein, we report a facile approach for the preparation of Fe₃O₄@C/Ni microtubes, which could be used as both a catalyst and the adsorbents. During the synthetic process, a layer of nickel ion-doped polydopamine (PDA-Ni²⁺) was polymerized in situ on the surface of the MoO₃@FeOOH by an extended stöber method using MoO₃ microrods as the sacrificing templates. Notably, the PDA-Ni²⁺ coating and the removal of the MoO₃ cores were carried out simultaneously during the coating of the PDA-Ni²⁺ in an ammonia solution. Then the prepared FeOOH@PDA-Ni²⁺ microtubes were converted to Fe₃O₄@C/Ni hybrid microtubes through a pyrolysis with a thermochemical reduction process. The resulting Fe₃O₄@C/Ni hybrid microtubes were used as a novel catalyst towards the reduction of 4-nitrophenol (4-NP) in the presence of NaBH₄. Moreover, they also exhibited highly selective adsorption on His-rich proteins (BHb). Moreover, the Fe₃O₄@C/Ni hybrid microtubes can be conveniently separated by an external magnetic field due to the presence of Ni and Fe₃O₄. Furthermore, they show good cyclic stability, which is important for the practical applications.

Formation of uniform magnetic C@CoNi alloy hollow hybrid composites with excellent performance for catalysis and protein adsorption

C@CoNi hollow composites are fabricated via an extended Stöber method, mussel chemistry and subsequent carbonization treatment, which can be used as a catalyst for the reduction of 4-nitrophenol and histidine-rich protein separation.

A combustion synthesis route for magnetically separable graphene oxide–CuFe2O4–ZnO nanocomposites with enhanced solar light-mediated photocatalytic activity

A novel GO–CuFe₂O₄–ZnO ternary nanocomposite has been designed as an efficient photocatalyst for the degradation of four toxic organic pollutants.

Formation of Fe3O4@SiO2@C/Ni hybrids with enhanced catalytic activity and histidine-rich protein separation

In this paper, we have developed an extended Stöber method to construct a Ni(2+)-polydopamine (PDA) complex thin coating on Fe3O4@SiO2 spheres, which can be carbonized to produce hybrid composites with metallic nickel nanoparticles embedded in a PDA-derived thin graphitic carbon layer (named Fe3O4@SiO2@C/Ni). Interestingly, by introducing a thin SiO2 spacer layer between PDA-Ni(2+) and Fe3O4, the reverse electron transfer from PDA to Fe3O4 is probably able to be suppressed in the calcination process, which leads to the in situ reduction of only Ni(2+) by PDA instead of Fe3O4 and Ni(2+). Consequently, the size and density of nickel nanoparticles on the surface of SiO2@Fe3O4 can be finely adjusted. Moreover, it is found that the ability of tuning nickel nanoparticles is mainly dependent on the thickness of the spacer layer. When the thickness of the SiO2 spacer is beyond the electron penetration depth, the size and density of nickel nanoparticles can be exactly tuned. The as-prepared Fe3O4@SiO2@C/Ni was employed as the catalyst to investigate the catalytic performance in the reduction of 4-nitrophenol (4-NP); furthermore, nickel nanoparticles decorated on Fe3O4@SiO2@C spheres display a strong affinity to His-tagged proteins (BHb and BSA) via a specific metal affinity force between polyhistidine groups and nickel nanoparticles.

Graphene-Templated Synthesis of Magnetic Metal Organic Framework Nanocomposites for Selective Enrichment of Biomolecules

Successful control of homogeneous and complete coating of graphene or graphene-based composites with well-defined metal organic framework (MOF) layers is a great challenge. Herein, novel magnetic graphene MOF composites were constructed via a simple strategy for self-assembly of well-distributed, dense, and highly porous MOFs on both sides of graphene nanosheets. Graphene functionalized with magnetic nanoparticles and carboxylic groups on both sides was explored as the backbone and template to direct the controllable self-assembly of MOFs. The prepared composite materials have a relatively high specific surface area (345.4 m(2) g(-1)), and their average pore size is measured to be 3.2 nm. Their relatively high saturation magnetization (23.8 emu g(-1)) indicates their strong magnetism at room temperature. Moreover, the multifunctional composite was demonstrated to be a highly effective affinity material in selective extraction and separation of low-concentration biomolecules from biological samples, in virtue of the size-selection property of the unique porous structure and the excellent affinity of the composite materials. Besides providing a solution for the construction of well-defined functional graphene-based MOFs, this work could also contribute to selective extraction of biomolecules, in virtue of the universal affinity between immobilized metal ions and biomolecules.

Graphene/graphene oxide and their derivatives in the separation/isolation and preconcentration of protein species: A review

The distinctive/unique electrical, chemical and optical properties make graphene/graphene oxide-based materials popular in the field of analytical chemistry. Its large surface offers excellent capacity to anchor target analyte, making it an powerful sorbent in the adsorption and preconcentration of trace level analyte of interest in the field of sample preparation. The large delocalized π-electron system of graphene framework provides strong affinity to species containing aromatic rings, such as proteins, and the abundant active sites on its surface offers the chance to modulate adsorption tendency towards specific protein via functional modification/decoration. This review provides an overview of the current research on graphene/graphene oxide-based materials as attractive and powerful adsorption media in the separation/isolation and preconcentration of protein species from biological sample matrixes. These practices are aiming at providing protein sample of high purity for further investigations and applications, or to achieve certain extent of enrichment prior to quantitative assay. In addition, the challenges and future perspectives in the related research fields have been discussed.

Reduced graphene oxide-stabilized copper nanocrystals with enhanced catalytic activity and SERS properties

The as-obtained Cu/rGO hybrids possess excellent air stability, a higher catalytic efficiency to the reduction of p-nitrophenol and exhibit surface-enhanced Raman scattering activity.

The Composites of Graphene Oxide with Metal or Semimetal Nanoparticles and Their Effect on Pathogenic Microorganisms

The present experiment describes a synthesis process of composites based on graphene oxide, which was tested as a carrier for composites of metal- or metalloid-based nanoparticles (Cu, Zn, Mn, Ag, AgP, Se) and subsequently examined as an antimicrobial agent for some bacterial strains (Staphylococcus aureus (S. aureus), methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli). The composites were first applied at a concentration of 300 µM on all types of model organisms and their effect was observed by spectrophotometric analysis, which showed a decrease in absorbance values in comparison with the control, untreated strain. The most pronounced inhibition (87.4%) of S. aureus growth was observed after the application of graphene oxide composite with selenium nanoparticles compared to control. Moreover, the application of the composite with silver and silver phosphate nanoparticles showed the decrease of 68.8% and 56.8%, respectively. For all the tested composites, the observed antimicrobial effect was found in the range of 26% to 87.4%. Interestingly, the effects of the composites with selenium nanoparticles significantly differed in Gram-positive (G⁺) and Gram-negative (G⁻) bacteria. The effects of composites on bacterial cultures of S. aureus and MRSA, the representatives of G⁺ bacteria, increased with increasing concentrations. On the other hand, the effects of the same composites on G⁻ bacteria E. coli was observed only in the highest applied concentration.

Synthesis of hierarchical nickel anchored on Fe3O4@SiO2 and its successful utilization to remove the abundant proteins (BHb) in bovine blood

The synthesis of hierarchical nickel anchored on Fe₃O₄@SiO₂ and their successful utilization to remove the abundant proteins (BHb) in bovine blood have been demonstrated.

Highly conductive one-dimensional nanofibers: silvered electrospun silica nanofibers via poly(dopamine) functionalization

Using tetraethyl orthosilicate as a main raw material, silica nanofibers (SiNFs) were prepared through the combination of a sol-gel process and an electrospinning technique followed by pyrolysis. Surface modified electrospun SiNFs developed by self-polymerization of polydopamine on the surface (SiNFs-PDA) served as templates for the electroless plating of silver nanoparticles (Ag NPs), using glucose as a reducing agent. The electrical resistivity of silver coated SiNPs-PDA (SiNFs-PDA/Ag) was measured by the four-point probe method and was found to be as low as 0.02 mΩ·cm at room temperature. The morphology of SiNFs-PDA/Ag before and after the blending with silicon rubber indicated a strong interaction between the silver layer and the SiNFs-PDA. The electrical and mechanical properties of the silicon rubber filled with SiNFs-PDA/Ag were studied to demonstrate the conductive performance application of SiNFs-PDA/Ag.

Ti4+-immobilized multilayer polysaccharide coated magnetic nanoparticles for highly selective enrichment of phosphopeptides

A novel magnetic polymer nanoparticle (Fe₃O₄@SiO₂@(HA/CS)₁₀–Ti⁴⁺ IMAC) was synthesized for the highly selective and efficient enrichment of phosphopeptides.

Preparation of magnetic graphene composites with hierarchical structure for selective capture of phosphopeptides

A novel graphene composite affinity material consisting of graphene scaffold, Fe3O4 nanoparticles for actuation and fully covered porous titania nanostructures as affinity coating has been designed and constructed. The obtained magnetic graphene composites have a saturation magnetization (Ms) value of 7.3 emu g-1, a BET specific surface area of 111.8 m2 g-1 and an average pore size of 15.1 nm for the porous affinity coating. The multifunctional graphene composites can realize the selective capture and convenient magnetic separation of target phosphopeptides by taking advantage of the decorated magnetic nanoparticles, highly pure and well crystallized affinity coating, and unique porous structure. Sensitivity and selectivity of the affinity graphene composites were evaluated using digests of standard proteins and complex biosamples as well as by comparison with the widely used TiO2 affinity microspheres. The results show that the affinity graphene composites can realize selective capture and rapid separation of low-abundance phosphopeptides from complex biological samples. Thus, this work will contribute to future applications in the purification and separation of specific biomolecules, in particular, low-abundance phosphopeptide biomarkers.

Nickel nanoparticle decorated graphene for highly selective isolation of polyhistidine-tagged proteins

Nickel nanoparticle decorated graphene (GP-Ni) is prepared by one-pot hydrothermal reduction of graphene oxide and nickel cations by hydrazine hydrate in the presence of poly(sodium-p-styrenesulfonate) (PSS). The GP-Ni hybrid is characterized by XRD, TEM, SEM, XPS, Raman and FT-IR spectra, demonstrating the formation of poly-dispersed nickel nanoparticles with an average size of 83 nm attached on the surface of graphene sheets. The GP-Ni hybrid exhibits ferromagnetic behavior with a magnetization saturation of 31.1 emu g(-1) at 10,000 Oersted (Oe). The GP-Ni also possesses favorable stability in aqueous medium and rapid magnetic response to an external magnetic field. These make it a novel magnetic adsorbent for the separation/isolation of His6-tagged recombinant proteins from a complex sample matrix (cell lysate). The targeted protein species is captured onto the surface of the GP-Ni hybrid via specific metal affinity force between polyhistidine groups and nickel nanoparticles. The SDS-PAGE assay indicates highly selective separation of His6-tagged Smt A from cell lysate. The GP-Ni hybrid displays favorable performance on the separation/isolation of His6-tagged recombinant proteins with respect to the commercial NTA-Ni(2+) column.