Activation of Hydrogen Peroxide by Ionic Liquids: Mechanistic Studies and Application in the Epoxidation of Olefins

Di(hydroperoxy)adamantane adducts: synthesis, characterization and application as oxidizers for the direct esterification of aldehydes

The di(hydroperoxy)adamantane adducts of water (1) and phosphine oxides p-Tol₃PO·(HOO)₂C(C₉H₁₄) (2), o-Tol₃PO·(HOO)₂C(C₉H₁₄) (3), and Cy₃PO·(HOO)₂C(C₉H₁₄) (4), as well as a CH₂Cl₂ adduct of a phosphole oxide dimer (8), have been created and investigated by multinuclear NMR spectroscopy, and by Raman and IR spectroscopy. The single crystal X-ray structures for 1-4 and 8 are reported. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the di(hydroperoxy)adamantane adducts. The Raman ν(O-O) stretching bands of 1-4 prove that the peroxo groups are present in the solids. Selected di(hydroperoxy)alkane adducts, in combination with AlCl₃ as catalyst, have been applied for the direct oxidative esterification of n-nonyl aldehyde, benzaldehyde, p-methylbenzaldehyde, p-bromobenzaldehyde, and o-hydroxybenzaldehyde to the corresponding methyl esters. The esterification takes place in an inert atmosphere, under anhydrous and oxygen-free conditions, within a time frame of 45 minutes to 5 hours at room temperature. Hereby, two oxygen atoms per adduct assembly are active with respect to the quantitative transformation of the aldehyde into the ester.

Di(hydroperoxy)cycloalkane Adducts of Triarylphosphine Oxides: A Comprehensive Study Including Solid-State Structures and Association in Solution

Four new di(hydroperoxy)cycloalkane adducts (Ahn adducts) of p-Tol₃PO (1) and o-Tol₃PO (2), namely, p-Tol₃PO·(HOO)₂C(CH₂)₅ (3), o-Tol₃PO·(HOO)₂C(CH₂)₅ (4), p-Tol₃PO·(HOO)₂C(CH₂)₆ (5), and o-Tol₃PO·(HOO)₂C(CH₂)₆ (6), have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The ³¹P NMR data are in accordance with hydrogen bonding of the di(hydroperoxy)alkanes to the P═O groups of the phosphine oxides. Due to their high solubility in organic solvents, natural abundance ¹⁷O NMR spectra of 1-6 could be recorded, providing the signals for the P═O groups and additionally the two different oxygen nuclei in the O-OH groups in the adducts 3-6. The association and mobility of 3-6 were explored by ¹H DOSY (diffusion ordered spectroscopy) NMR, which indicated persistent hydrogen bonding of the adducts in solution. Competition experiments with phosphine oxides allowed ranking of the affinities of the di(hydroperoxy)cycloalkanes for the different phosphine oxide carriers. On the basis of variable temperature ³¹P NMR investigations, the Gibbs energies of activation ΔG^‡ for the adduct dissociation processes of 3-6 at different temperatures, as well as the enthalpy ΔH^‡ and entropy ΔS^‡ of activation, have been determined. IR spectroscopy of 3-6 corroborated the hydrogen bonding, and in the Raman spectra, the ν(O-O) stretching bands have been identified, confirming the presence of peroxy groups in the solid materials. The high solubilities in selected organic solvents have been quantified.

Ionic liquid surfactants as multitasking micellar catalysts for epoxidations in water

Surface-active imidazolium tungstate ILs are multitask epoxidation catalysts in water using H₂O₂ as oxidant. The micelles solubilize olefins in the aqueous phase and catalyze the epoxidation. Organophosphonic acids greatly increase the reaction rate.

Determination of the Critical Micelle Concentration of Imidazolium Ionic Liquids in Aqueous Hydrogen Peroxide

The critical micelle concentrations (CMCs) of several imidazolium-based ionic liquids (ILs) in aqueous H₂O₂ (50 wt % in H₂O) were determined by tensiometry, conductometry, and the rate of catalytic epoxidation of cis-cyclooctene. CMC values in aqueous H₂O₂ were significantly lower compared to values in pure water. In both H₂O₂ solution and water, the CMC of all ILs decreases with an increasing alkyl chain length and increases with a rising temperature. The degree of micelle ionization of 1-methyl-3-octylimidazolium tetrafluoroborate ([OMIM][BF₄]) was calculated by conductometry in a temperature range of 22-70 °C.

Hydrogen peroxide adducts of triarylphosphine oxides

Five new hydrogen peroxide adducts of phosphine oxides (p-Tol₃PO·H₂O₂)₂ (1), (o-Tol₃PO·H₂O₂)₂ (2), (o-Tol₂PhPO·H₂O₂)₂ (3), (p-Tol₃PO)₂·H₂O₂ (4), and (o-TolPh₂PO)₂·H₂O₂ (5), and the water adduct (o-Tol₂PhPO·H₂O)₂ (6) have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the hydrogen peroxide. The mono- versus dimeric nature of the adduct assemblies has been investigated by DOSY NMR experiments. Raman spectroscopy of the symmetric adducts and the ν(O-O) stretching bands confirm the presence of hydrogen-bonded hydrogen peroxide in the solid materials. The solubilities in organic solvents have been quantified. Due to the high solubilities of 1-6 in organic solvents their ¹⁷O NMR spectra could be recorded in natural abundance, providing well-resolved signals for the P[double bond, length as m-dash]O and O-O groups. The adducts 1-5 have been probed regarding their stability in solution at 105 °C. The decomposition of the adduct 1 takes place by loss of the active oxygen atoms in two steps.

Rhenium(VII) Compounds as Inorganic Precursors for the Synthesis of Organic Reaction Catalysts

Rhenium is an element that exhibits a broad range of oxidation states. Synthesis paths of selected rhenium compounds in its seventh oxidation state, which are common precursors for organic reaction catalysts, were presented in this paper. Production technologies for copper perrhenate, aluminum perrhenate as well as the ammonia complex of cobalt perrhenate, are thoroughly described. An ion exchange method, based on Al or Cu metal ion sorption and subsequent elution by aqueous perrhenic acid solutions, was used to obtain perrhenates. The produced solutions were neutralized to afford the targeted aluminum perrhenate and copper perrhenate products in high purity. The developed technologies allow one to manage the wastes from the production of these perrhenates as most streams were recycled. Hexaamminecobalt(III) perrhenate was produced by a newly developed method enabling us to produce a high purity compound in a reaction of spent hexaamminecobalt(III) chloride solution with a perrhenic acid. All prepared compounds are the basis for precursor preparation in organic catalysis.

Selective synthesis and stabilization of peroxides via phosphine oxides

MEKPO (methyl ethyl ketone peroxide) and other peroxides can be synthesized selectively and stabilized as hydrogen-bonded phosphine oxide adducts.

Reduction of carbon dioxide and organic carbonyls by hydrosilanes catalysed by the perrhenate anion

A simple quaternary ammonium perrhenate salt catalyses the hydrosilylation of aldehydes, ketones, and carbon dioxide, and the methylation of amines using carbon dioxide. DFT calculations show that a perrhenate hypervalent silicate interacts directly with CO₂.

Applications of Liquid/Liquid Biphasic Oxidations by Hydrogen Peroxide with Ionic Liquids or Deep Eutectic Solvents

This Minireview focuses on recent applications of ionic liquids (ILs) and deep eutectic solvents (DESs) in biphasic oxidations in which the oxidizing agent corresponds to hydrogen peroxide. Biphasic reactions are accomplished when the substrate presents low or moderate solubility in aqueous (polar) systems and/or when separation of products and byproduct is an issue. The properties of the IL and DES allows the reaction activity to be intensified. On the other hand, the high chemical stability of the ionic solvents allows the use of hydrogen peroxide to minimize solvent degradation and unwanted byproducts. The experimental evidence presented herein shows that ILs and DESs can be used as cocatalysts, catalysts, and solvents to achieve enhanced yields and conversions. The process advantages, in terms of a reduction of volatile solvents, improve the safety and use of the oxidizing agent, which implies the possibility of developing new process improvements in the future.

Olefin Epoxidation in Aqueous Phase Using Ionic-Liquid Catalysts

Hydrophobic imidazolium-based ionic liquids (IL) act as catalysts for the epoxidation of unfunctionalized olefins in water using hydrogen peroxide as oxidant. Although the catalysts are insoluble in both the substrate and in water, surprisingly, they are very well soluble in aqueous H2 O2 solution, owing to perrhenate-H2 O2 interactions. Even more remarkably, the presence of the catalyst also boosts the solubility of substrate in water. This effect is crucially dependent on the cation design. Hence, the imidazolium perrhenates enable both the transfer of hydrophobic substrate into the aqueous phase, and serve as actual catalysts, which is unprecedented. At the end of the reaction and in absence of H2 O2 the IL catalyst forms a third phase next to the lipophilic product and water and can easily be recycled.

Hydrolysis of cellulose catalyzed by quaternary ammonium perrhenates in 1-allyl-3-methylimidazolium chloride

Quaternary ammonium perrhenates were applied as catalyst to promote the hydrolysis of cellulose in 1-allyl-3-methylimidazolium chloride ([Amim]Cl). The quaternary ammonium perrhenates displayed good catalytic performance for cellulose hydrolysis. Water was also proven to be effective to promote cellulose hydrolysis. Accordingly, 97% of total reduced sugar (TRS) and 42% of glucose yields could be obtained under the condition of using 5mol% of tetramethyl ammonium perrhenate as catalyst, 70μL of water, ca. 0.6mmol of microcrystalline cellulose (MCC) and 2.0g of [Amim]Cl as solvent under microwave irradiation for 30min at 150°C (optimal conditions). The influence of quaternary ammonium cation on the efficiency of cellulose hydrolysis was examined based on different cation structures of perrhenates. The mechanism on perrhenate catalyzed cellulose hydrolysis is also discussed, whereas hydrogen bonding between ReO4 anion and hydroxyl groups of cellulose is assumed to be the key step for depolymerization of cellulose.

Hydrogen Peroxide and Di(hydroperoxy)propane Adducts of Phosphine Oxides as Stoichiometric and Soluble Oxidizing Agents

Aqueous hydrogen peroxide is widely used as an oxidizing agent in industry and academia. Herein, the hydrogen peroxide adducts of phosphine oxides, [tBu3PO⋅H2O2]2 and [Ph3PO⋅H2O2]2⋅H2O2, are described. Additionally, the corresponding di(hydroperoxy)propane adducts R3PO⋅(HOO)2CMe2 (R=Cy, Ph) were synthesized and characterized. All adducts could be obtained as large single crystals suitable for structural characterization by X-ray crystallography and solid-state NMR spectroscopy. The di(hydroperoxy)propane adducts are soluble in organic solvents which enables oxidation reactions in one phase. As the adducts are solid and molecular, they can easily be applied stoichiometrically. No loss of oxidizing power occurs upon long-term storage of the single crystals at room temperature or the powders at -20 °C.

Catalytically active perrhenate based ionic liquids: a preliminary ecotoxicity and biodegradability assessment

Recently it was shown that water and air stable perrhenate based ionic liquids (ILs) are promising catalysts for oxidation reactions.

Influence of substituents on cation–anion contacts in imidazolium perrhenates

A series of imidazolium perrhenates with different substituents at the imidazolium ring were synthesised and characterised, including single crystal X-ray diffraction.

Catalytic epoxidation by perrhenate through the formation of organic-phase supramolecular ion pairs

Organic-phase supramolecular ion pair (SIP) host–guest assemblies of perrhenate anions (ReO₄⁻) with ammonium amide receptor cations are reported.