Hierarchical Structures Based on Functionalized Magnetic Cores and Layered Double-Hydroxide Shells: Concept, Controlled Synthesis, and Applications

Recycling Fe and improving organic pollutant removal via in situ forming magnetic core-shell Fe3O4@CaFe-LDH in Fe(II)-catalyzed oxidative wastewater treatment

Due to its high efficiency, Fe(II)-based catalytic oxidation has been one of the most popular types of technology for treating growing organic pollutants. A lot of chemical Fe sludge along with various refractory pollutants was concomitantly produced, which may cause secondary environmental problems without proper disposal. We here innovatively proposed an effective method of achieving zero Fe sludge, reusing Fe resources (Fe recovery = 100%) and advancing organics removal (final TOC removal > 70%) simultaneously, based on the in situ formation of magnetic Ca-Fe layered double hydroxide (Fe3O4@CaFe-LDH) nano-material. Cations (Ca2+ and Fe3+) concentration (≥ 30 mmol/L) and their molar ratio (Ca:Fe ≥ 1.75) were crucial to the success of the method. Extrinsic nano Fe3O4 was designed to be involved in the Fe(II)-catalytic wastewater treatment process, and was modified by oxidation intermediates/products (especially those with COO- structure), which promoted the co-precipitation of Ca2+ (originated from Ca(OH)2 added after oxidation process) and by-produced Fe3+ cations on its surface to in situ generate core-shell Fe3O4@CaFe-LDH. The oxidation products were further removed during Fe3O4@CaFe-LDH material formation via intercalation and adsorption. This method was applicable to many kinds of organic wastewater, such as bisphenol A, methyl orange, humics, and biogas slurry. The prepared magnetic and hierarchical CaFe-LDH nanocomposite material showed comparable application performance to the recently reported CaFe-LDHs. This work provides a new strategy for efficiently enhancing the efficiency and economy of Fe(II)-catalyzed oxidative wastewater treatment by producing high value-added LDHs materials.

Multifaceted potential applicability of hydrotalcite-type anionic clays from green chemistry to environmental sustainability

Hydrotalcite-like anionic clays (HTs) also known as Layered double hydroxides (LDHs) have been developed as multifunctional materials in numerous applications related to catalysis, adsorption, and ion-exchange processes. These materials constitute an important class of ionic lamellar solid clays of Brucite-like structure which comprise of consecutive layers of divalent and trivalent metal cations with charge balancing anions and water molecules in interlayer space. These materials have received increasing attention in research due to their interesting properties namely layered structure, ease of preparation, flexible tunability, ability to intercalate different types of anions, electronic properties, high thermal stability, high biocompatibility, and easy biodegradation. Moreover, HTs/LDHs have unique tailorable and tuneable characteristics such as both acidic and basic sites, anion exchange capability, surface area, basal spacing, memory effect, and also exhibit high exchange capacities, which makes them versatile materials for a wide range of applications and extended their horizons to diverse areas of science and technology. This study enlightens the various rational researches related to the synthetic methods and features focusing on synthesis and/or fabrication with other hybrids and their applications. The diverse applications (namely catalyst, adsorbent to toxic chemicals, agrochemicals management, non-toxic flame retardants, and recycling of plastics) of these multifunctional materials related to a clean and sustainable environment were also summarized.

Layered metal oxides loaded ceramic membrane activating peroxymonosulfate for mitigation of NOM membrane fouling

Catalytic membrane can achieve sieving separation and advanced oxidation simultaneously, which can improve the effluent water quality while reducing membrane fouling. In this study, the catalytic membranes (M²⁺Al@AM) were fabricated by loading different binary layered metal oxides (M²⁺Al-LMO: MnAl-LMO, CuAl-LMO and CoAl-LMO) on alumina ceramic substrate membranes (AM) via vacuum filtration followed by calcination process. The performance of the catalytic membranes was investigated by filtering actual surface water. It was found that the presence of peroxymonosulfate (PMS) could mitigate membrane fouling effectively, as evidenced by the increase of normalized flux from 0.28 to 0.62 in CoAl@AM/PMS system, from 0.25 to 0.52 in CuAl@AM/PMS system, and from 0.22 to 0.31 in MnAl@AM/PMS system, respectively. Correspondingly, the CoAl@AM exhibited the highest removal for UV₂₅₄, TOC and fluorescent components in the surface water, followed by CuAl@AM and MnAl@AM. Quenching effect of phenol and furfuryl alcohol proposed the surface-bound radicals and singlet oxygen were the major reactive oxygen species in the M²⁺Al@AM/PMS systems. Interface free energy calculations confirmed the in-situ PMS activation could enhance the repulsive interactions between NOM and the membranes, thus mitigating membrane fouling. This work provides an original but simple strategy for catalytic ceramic membrane preparation and new insights into the mechanism of membrane fouling mitigation in catalytic membrane system.

Research progress on photocatalytic reduction of CO2 based on LDH materials

Converting CO₂ to renewable fuels or valuable carbon compounds is an effective way to solve the global warming and energy crisis. Compared with other CO₂ conversion methods, photocatalytic reduction of CO₂ is more energy-saving, environmentally friendly, and has a broader application prospect. Layered double hydroxide (LDH) has attracted widespread attention as a two-dimensional material, composed of metal hydroxide layers, interlayer anions and water molecules. This review briefly introduces the basic theory of photocatalysis and the mechanism of CO₂ reduction. The composition and properties of LDH are introduced. The research progress on LDH in the field of photocatalytic reduction of CO₂ is elaborated from six aspects: directly as a catalyst, as a precursor for a catalyst, and by modification, intercalation, supporting with other materials and construction of a heterojunction. Finally, the development prospects of LDH are put forward. This review could provide an effective reference for the development of more efficient and reasonable photocatalysts based on LDH.

Aluminum-based layered metal oxides activating peroxymonosulfate for bisphenol A degradation via surface-bound sulfate radicals and singlet oxygen

In this study, a series of aluminum-based layered metal oxide with various divalent metals (M²⁺Al-LMOs) were prepared and employed in activation of peroxymonosulfate (PMS) for bisphenol A (BPA) degradation. The BPA removal rates of M²⁺Al-LMOs were ordered as: CoAl(100%) > MnAl(75.6%) > CuAl(63.2%) > NiAl(9.0%) > MgAl = ZnAl-LMO(0%). CoAl-LMO showed the highest kinetic constant (k = 1.329 µmol^-1g_cat^-1s^-1), which was 3.95 times of MnAl-LMO, 5.36 times of CuAl-LMO, 88.6 times of NiAl-LMO and 443 times of MgAl-LMO and ZnAl-LMO, respectively, and also exhibited the highest TOC removal rate (83.3%). The surface-bound sulfate radical (SO₄^·-) and singlet oxygen (¹O₂) were elucidated as the dominant reactive oxygen species (ROS) for BPA degradation. The M²⁺Al-LMOs/PMS system not only displayed wide applicability in different pH and inorganic anions environments, but also had excellent stability and reusability. This work provides a novel family of M²⁺Al-LMOs to activate PMS for water treatment.

Heterogeneous Fenton catalysts: A review of recent advances

Heterogeneous Fenton catalysts are emerging as excellent materials for applications related to water purification. In this review, recent trends in the synthesis and application of heterogeneous Fenton catalysts for the abatement of organic pollutants and disinfection of microorganisms are discussed. It is noted that as the complexity of cell wall increases, the resistance level towards various disinfectants increases and it requires either harsh conditions or longer exposure time for the complete disinfection. In case of viruses, enveloped viruses (e.g. SARS-CoV-2) are found to be more susceptible to disinfectants than the non-enveloped viruses. The introduction of plasmonic materials with the Fenton catalysts broadens the visible light absorption efficiency of the hybrid material, and incorporation of semiconductor material improves the rate of regeneration of Fe(II) from Fe(III). A special emphasis is given to the use of Fenton catalysts for antibacterial applications. Composite materials of magnetite and ferrites remain a champion in this area because of their easy separation and reuse, owing to their magnetic properties. Iron minerals supported on clay materials, perovskites, carbon materials, zeolites and metal-organic frameworks (MOFs) dramatically increase the catalytic degradation rate of contaminants by providing high surface area, good mechanical stability, and improved electron transfer. Moreover, insights to the zero-valent iron and its capacity to remove a wide range of organic pollutants, heavy metals and bacterial contamination are also discussed. Real world applications and the role of natural organic matter are summarised. Parameter optimisation (e.g. light source, dosage of catalyst, concentration of H2O2 etc.), sustainable models for the reusability or recyclability of the catalyst and the theoretical understanding and mechanistic aspects of the photo-Fenton process are also explained. Additionally, this review summarises the opportunities and future directions of research in the heterogeneous Fenton catalysis.

Efficient decolorization of Methylene Blue catalyzed by MgFe-layered double hydroxides in the presence of hydrogen peroxide

MgFe-layered double hydroxides (LDHs) were prepared by co-precipitation method with the ratios of [Mg²⁺]/[Fe³⁺] varied in the range of 2:1-6:1, and occupied as heterogeneous catalysts for the degradation of Methylene Blue (MB) in the Fenton process. MgFe-LDH prepared with the ratio of [Mg²⁺]/[Fe³⁺] at 3:1 was verified to be of high purity. The Fenton-like process catalyzed by MgFe-LDH performed excellently, and more than 97% degradation of MB was obtained with 0.5 mmol/L H₂O₂ and 0.50 g/L MgFe-LDH at initial pH 2 at room temperature. The occurrence of hydroxyl radicals (·OH) was detected and the mechanism was proposed. MgFe-LDH is of excellent catalytic activity and good reusability.

Recent advances in layered double hydroxide-based nanomaterials for the removal of radionuclides from aqueous solution

Layered double hydroxides (LDHs), one of the most important two-dimensional layered compounds, have enabled massive developments in effective pollution treatments. Their derivative materials have also attracted multidisciplinary attention owing to the intrinsic advantages of their moderate chemiostability, low cost and nontoxicity. Over the past few decades, significant advances have been made in the synthesis of novel LDH-based composites and the optimization of characterization techniques. In this review, we give an overview of the recent advances in LDH-based nanomaterials, from a brief introduction to their preparation and modification methods to an overview of their application in the removal of radionuclides and an exploration of their underlying adsorption mechanisms. In the end, a summary and outlook are also briefly addressed. This review intends to provide deep insight into the design of high-performance LDH-based materials for the potential elimination of radionuclides from aqueous solutions during environmental pollution cleanup.

Core-shell zeolite@aqueous miscible organic-layered double hydroxides

We report a general method for the synthesis of core-shell hybrid materials containing a microporous zeolite core with an aqueous miscible organic-layered double hydroxide (AMO-LDH) shell using a simple in situ coprecipitation method. For example, zeolite-HY@AMO-Mg2Al-CO3-LDH contains a 150 nm hierarchical AMO-Mg2Al-CO3-LDH surface coating on zeolite-HY. It exhibits a similar BET surface area (698 m2 g-1) as the parent zeolite-HY but this surface area has been re-allocated between microspores and mesopores. We believe that surface aluminium sites act as nucleation sites for the formation of the LDH coating and so robustly links it into the zeolite lattice. We expect that this new hybrid structure with micropores dominating in the core and mesopores populating the shell will provide a desirable new hybrid structure type for adsorption or catalysis.

Energy and structure of bonds in the interaction of organic anions with layered double hydroxide nanosheets: A molecular dynamics study

The application of hybrid and hierarchical nanomaterials based on layered hydroxides and oxyhydroxides of metals is a swiftly progressing field in biomedicine. Layered double hydroxides (LDH) possess a large specific surface area, significant surface electric charge and biocompatibility. Their physical and structural properties enable them to adsorb various kinds of anionic species and to transport them into cells. However, possible side effects resulting from the interaction of LDH with anions of the intercellular and intracellular medium need to be considered, since such interaction can potentially disrupt ion transport, signaling processes, apoptosis, nutrition and proliferation of living cells. In the present paper molecular dynamics is used to determine the energies of interaction of organic anions (aspartic acid, glutamic acid and bicarbonate) with a fragment of layered double hydroxide Mg/Al-LDH. The average number of hydrogen bonds between the anions and the hydroxide surface and characteristic binding configurations are determined. Possible effects of LDH on the cell resulting from binding of protein fragments and replacement of native intracellular anions with delivered anions are considered.

Synthesis of small-sized, porous, and low-toxic magnetite nanoparticles by thin POSS silica coating

In this communication, we report the synthesis of small-sized (<10 nm), water-soluble, magnetic nanoparticles (MNPs) coated with polyhedral oligomeric silsesquioxanes (POSS), which contain either polyethylene glycol (PEG) or octa(tetramethylammonium) (OctaTMA) as functional groups. The POSS-coated MNPs exhibit superparamagnetic behavior with saturation magnetic moments (51-53 emu g(-1)) comparable to silica-coated MNPs. They also provide good colloidal stability at different pH and salt concentrations, and low cytotoxicity to MCF-7 human breast epithelial cells. The relaxivity data and magnetic resonance (MR) phantom images demonstrate the potential application of these MNPs in bioimaging.

Fabrication of nickel-foam-supported layered zinc–cobalt hydroxide nanoflakes for high electrochemical performance in supercapacitors

Nickel foam supported Zn–Co hydroxide nanoflakes were fabricated by a facile solvothermal method, which exhibited excellent specific capacitance and remarkable cycling stability as electrode materials in supercapacitors.