Solar Fuels: Photoelectrosynthesis of CO from CO2at p-Type Si using Fe Porphyrin Electrocatalysts

Silicon photocathode functionalized with osmium complex catalyst for selective catalytic conversion of CO2 to methane

Solar-driven CO2 reduction to yield high-value chemicals presents an appealing avenue for combating climate change, yet achieving selective production of specific products remains a significant challenge. We showcase two osmium complexes, przpOs, and trzpOs, as CO2 reduction catalysts for selective CO2-to-methane conversion. Kinetically, the przpOs and trzpOs exhibit high CO2 reduction catalytic rate constants of 0.544 and 6.41 s-1, respectively. Under AM1.5 G irradiation, the optimal Si/TiO2/trzpOs have CH4 as the main product and >90% Faradaic efficiency, reaching -14.11 mA cm-2 photocurrent density at 0.0 VRHE. Density functional theory calculations reveal that the N atoms on the bipyrazole and triazole ligands effectively stabilize the CO2-adduct intermediates, which tend to be further hydrogenated to produce CH4, leading to their ultrahigh CO2-to-CH4 selectivity. These results are comparable to cutting-edge Si-based photocathodes for CO2 reduction, revealing a vast research potential in employing molecular catalysts for the photoelectrochemical conversion of CO2 to methane.

Photoelectrocatalytic Utilization of CO2 : A Big Show of Si-based Photoelectrodes

CO2 is a greenhouse gas that contributes to environmental deterioration; however, it can also be utilized as an abundant C1 resource for the production of valuable chemicals. Solar-driven photoelectrocatalytic (PEC) CO2 utilization represents an advanced technology for the resourcing of CO2 . The key to achieving PEC CO2 utilization lies in high-performance semiconductor photoelectrodes. Si-based photoelectrodes have attracted increasing attention in the field of PEC CO2 utilization due to their suitable band gap (1.1 eV), high carrier mobility, low cost, and abundance on Earth. There are two pathways to PEC CO2 utilization using Si-based photoelectrodes: direct reduction of CO2 into small molecule fuels and chemicals, and fixation of CO2 with organic substrates to generate high-value chemicals. The efficiency and product selectivity of PEC CO2 utilization depends on the structures of the photoelectrodes as well as the composition, morphology, and size of the catalysts. In recent years, significant and influential progress has been made in utilizing Si-based photoelectrodes for PEC CO2 utilization. This review summarizes the latest research achievements in Si-based PEC CO2 utilization, with a particular emphasis on the mechanistic understanding of CO2 reduction and fixation, which will inspire future developments in this field.

Aqueous Photoelectrochemical CO2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst

We report a precious-metal-free molecular catalyst-based photocathode that is active for aqueous CO₂ reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3-aminopropyl)triethoxysilane linker to p-type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO₂ to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of -0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s^-1 . To date, this is the only molecular catalyst-based photoelectrode that is active for the six-electron reduction of CO₂ to methanol. This work puts forth a strategy for interfacing molecular catalysts to p-type semiconductors and demonstrates state-of-the-art performance for photoelectrochemical CO₂ reduction to CO and methanol.

Molecular catalysis of CO2 reduction: recent advances and perspectives in electrochemical and light-driven processes with selected Fe, Ni and Co aza macrocyclic and polypyridine complexes

Earth-abundant Fe, Ni, and Co aza macrocyclic and polypyridine complexes have been thoroughly investigated for CO2 electrochemical and visible-light-driven reduction. Since the first reports in the 1970s, an enormous body of work has been accumulated regarding the two-electron two-proton reduction of the gas, along with mechanistic and spectroscopic efforts to rationalize the reactivity and establish guidelines for structure-reactivity relationships. The ability to fine tune the ligand structure and the almost unlimited possibilities of designing new complexes have led to highly selective and efficient catalysts. Recent efforts toward developing hybrid systems upon combining molecular catalysts with conductive or semi-conductive materials have converged to high catalytic performances in water solutions, to the inclusion of these catalysts into CO2 electrolyzers and photo-electrochemical devices, and to the discovery of catalytic pathways beyond two electrons. Combined with the continuous mechanistic efforts and new developments for in situ and in operando spectroscopic studies, molecular catalysis of CO2 reduction remains a highly creative approach.

The Development of Cocatalysts for Photoelectrochemical CO2 Reduction

The ever-increasing anthropogenic consumption of fossil fuels and the resulting large emission of CO₂ have led to a severe energy crisis and climate change. Photocatalytic reduction of CO₂ into fuels using solar energy is considered as a promising way to address these two problems. In particular, photoelectrochemical (PEC) reduction of CO₂ can integrate and optimize the advantages of both photocatalysis and electrocatalysis for improved conversion efficiency and selectivity. In addition to the charge generation and separation, the efficient reduction of CO₂ on the surface of a semiconductor-based photoelectrode remains a scientifically critical challenge, which can be greatly enhanced by the surface modification of cocatalysts. Herein, the recent developments of cocatalysts in PEC CO₂ reduction over semiconductor-based photoelectrodes are described, and the basic principles of PEC CO₂ reduction and the function of the cocatalyst in photoelectrocatalysis are discussed. The structure optimization between the photoelectrodes and the cocatalysts is also summarized since the loading of cocatalyst may shield the incident light and hinder charge transfer between them. Furthermore, the challenges and perspectives for PEC reduction of CO₂ are also presented.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Semiconductor-Based Photoelectrochemical Conversion of Carbon Dioxide: Stepping Towards Artificial Photosynthesis

The photoelectrochemical (PEC) carbon dioxide reduction process stands out as a promising avenue for the conversion of solar energy into chemical feedstocks, among various methods available for carbon dioxide mitigation. Semiconductors derived from cheap and abundant elements are interesting candidates for catalysis. Whether employed as intrinsic semiconductors or hybridized with metallic cocatalysts, biocatalysts, and metal molecular complexes, semiconductor photocathodes exhibit good performance and low overpotential during carbon dioxide reduction. Apart from focusing on carbon dioxide reduction materials and chemistry, PEC cells towards standalone devices that use photohybrid electrodes or solar cells have also been a hot topic in recent research. An overview of the state-of-the-art progress in PEC carbon dioxide reduction is presented and a deep understanding of the catalysts of carbon dioxide reduction is also given.

CO2 reduction with Re(i)–NHC compounds: driving selective catalysis with a silicon nanowire photoelectrode

Excellent selectivity was observed in CO₂ reduction using Re(i)–NHC catalysts on a silicon nanowire photoelectrode.

Electrocatalytic Study of Carbon Dioxide Reduction By Co(TPP)Cl Complex

Carbon dioxide (CO2) is notorious for being a greenhouse gas and is the most important cause of global warming. However, it can be converted into useful products as it is a source of carbon. Reduction of CO2is therefore an attractive research topic for many chemists. Different methods of electrocatalytic reduction of CO2have been reported previously. Since CO2is very stable, the direct electroreduction of CO2into CO requires high potential at −2.2 V versus Ag/AgCl. In this work, CO2reduction was carried out by the photoelectrocatalysis of CO2in the presence of cobalt(III)tetraphenylporphyrin [Co(TPP)Cl] at −1.85 V with a current efficiency of 71%. At illuminated p-type silicon photocathode, the reduction of CO2into CO was performed at a potential of 300 mV which is positive. However, at the same conditions, potential of −1.55 V with a current efficiency ofca65% is required for the carbon electrode.