Ruthenium(II)-Catalyzed Oxidative CH Alkenylations of Sulfonic Acids, Sulfonyl Chlorides and Sulfonamides

Factors Affecting the Formation and Transformation of the Intermediates in Pd(II)-Catalyzed Aromatic C-H Activation: A Comprehensive Study with the Pd(II)/LA Platform

How the factors affecting the formation and transformation of the intermediates in Pd(II)-catalyzed aromatic C-H activation: A comprehensive study with the Pd(II)/LA platform. Using the Pd(II)/Lewis acid (LA)-catalyzed C-H activation of electron-rich acetanilides as a platform, the C-H activation intermediates, including the precomplex η2-intermediate, the agostic hydrogen intermediate, and the palladacycle compound have been well-characterized. This work presents how the catalyst source, substrate, and solvent affect the formation of the η2-intermediate and its equilibrium with the agostic hydrogen intermediate, and the transformation of the agostic hydrogen intermediate to the palladacycle compound through C-H activation. The findings disclosed above are provided as a guideline for the catalyst design of the oxidative olefination of acetanilide with dioxygen, and the catalytic efficiency matched well with the mechanistic findings.

DLPNO-CCSD(T) and DFT study of the acetate-assisted C-H activation of benzaldimine at [RuCl2(p-cymene)]2: the relevance of ligand exchange processes at ruthenium(II) complexes in polar protic media

To gain mechanistic insights into the acetate-assisted cyclometallations of arylimines promoted by [RuCl2(p-cymene)]2 in polar protic media, DFT geometry optimizations (with M06 and ωB97X-D3 functionals and the cc-pVDZ-PP[Ru] basis set) followed by DLPNO-CCSD(T)/CBS energy evaluations were performed using benzaldimine as a model substrate and methanol as the solvent (with CPCM or SMD models). The calculation results show that coordination of the imine to an acetate ruthenium precursor is followed by anion (chloride or acetate) dissociation as the rate-determining step of the process. H-Bonding of two explicit MeOH to the anion reduces the calculated activation energy to ca. 23 kcal mol-1, in good agreement with the experimental half-life at room temperature. Subsequent AMLA/CMD C-H activation of the intermediate cationic complexes is a faster, reversible process. Alternative reaction pathways involving neutral diacetate ruthenium complexes offer AMLA/CMD transition state structures of lower energy but are precluded due to higher energy barriers for the initial ligand exchange processes at ruthenium. Solvent assistance accelerates the final chloride/acetate exchange processes on the cycloruthenate intermediates, particularly when compression in the condensed phase is taken into consideration. The performance of six DFT functionals (with the aug-pVTZ-PP[Ru] basis set) was assessed using the DLPNO-CCSD(T)/CBS reference energies. Neutral diacetate ruthenium complexes were incorrectly predicted as being kinetically relevant when using hybrid DFT methods (PBE0-D3(BJ), M06-2X or ωB97M-V). Good agreement between the calculated barrier heights and our benchmark energy results was obtained by using double-hybrid DFT methods. PWPB95 with D3(BJ) or D4 dispersion energy corrections was found to be the most accurate (ΔG≠ MUE of ca. 1 kcal mol-1). This study may aid our understanding of and help with further experimental investigations of synthetically useful carboxylate-assisted C-H bond functionalizations involving (N,C)-cyclometallated (p-cymene)Ru(II) intermediate complexes in sustainable polar protic solvents.

Palladium(II)-catalyzed annulation of N-methoxy amides and arynes: computational mechanistic insights and substituents effects

CONTEXT

The combined use of transition metal-catalyzed C-H activation with aryne annulation reactions has emerged as an important strategy in organic synthesis. In this study, the mechanisms of the palladium(II)-catalyzed annulation reaction of N-methoxy amides and arynes were computationally investigated by density functional theory. The role of methoxy amide as a directing group was elucidated through the calculation of three different pathways for the C-H activation step, showing that the pathway where amide nitrogen acts as a directing group is preferable. At the reductive elimination transition state, an unstable seven-membered ring is formed preventing the lactam formation. A substituent effect study based on an NBO analysis, Hammet, and using a More O'Ferall-Jenks plot indicates that the C-H activation step proceeds via an electrophilic concerted metalation-deprotonation (eCMD) mechanism. The results show that electron-withdrawing groups increase the activation barrier and contribute to an early Pd-C bond formation and a late C-H bond breaking when compared with electron-donating substituents. Our computational results are in agreement with the experimental data provided in the literature.

METHODS

All calculations were performed using Gaussian 16 software. Geometry optimizations, frequency analyses at 393.15 K, and IRC calculations were conducted at the M06L/Def2-SVP level of theory. Corrected electronic energies, NBO charges, and Wiberg bond indexes were computed at the M06L/Def2-TZVP//M06L/Def2-SVP level of theory. Implicit solvent effects were considered in all calculations using the SMD model, with acetonitrile employed as the solvent.

Carboxylic Acid-Enabled Vinylene Transfer Reaction by Co(III) Catalyst: Scope and Applications to the Five-Step Total Synthesis of Protoberberine Alkaloids Containing Free Hydroxyl Group without Protection

A Co(III)-catalyzed vinylene transfer reaction enabled by carboxylic acid is presented. This redox-neutral transformation tolerates various functional groups, including free hydroxyl groups, and features practicality. Five-step routes based on the vinylene transfer reaction and Heck annulation have been devised to the total synthesis of 8-oxodehydrodiscretamine and 2-demethyl-oxypalmatine without the protection of the free hydroxyl functionality.

Palladium-Catalyzed Electrooxidative Double C-H Arylation

The electrochemical transition metal-catalyzed cross-dehydrogenative reaction has emerged as a promising platform to achieve a sustainable and atom-economic organic synthesis that avoids hazardous oxidants and minimizes undesired byproducts and circuitous functional group operations. However, a poor mechanistic understanding still prevents the widespread adoption of this strategy. In this regard, we herein present an electrochemical palladium-catalyzed oxidative coupling strategy to access biaryls in the absence of a stoichiometric chemical oxidant. The robust palladaelectrocatalysis considerably suppresses the occurrence of homocoupling and oxygenation, being compatible even with electron-deficient arenes. Late-stage functionalization and Boscalid precursor synthesis further highlighted the practical importance of our electrolysis. Remarkably, mechanistic studies including the evaluation of the reaction order of each component by variable time normalization analysis (VTNA) and initial rate analysis, H/D exchange experiment, kinetic isotope effect, and stoichiometric organometallic experiments provided strong support for the involvement of transmetalation between two organopalladium complexes in the turnover limiting step. Therefore, matching the concentrations or lifetimes of two distinct organopalladium intermediates is revealed to be a pivot to the success of electrooxidative catalysis. Moreover, the presence of cationic copper(II) seems to contribute to the stabilization of the palladium(0) catalyst instead of playing a role in the oxidation of the catalyst.

Merging Visible Light Photocatalysis and P(III)-Directed C-H Activation by a Single Catalyst: Modular Assembly of P-Alkyne Hybrid Ligands

Metal-catalyzed C-H activation strategies provide an efficient approach for synthesis by minimizing atom, step, and redox economy. Developing milder, greener, and more effective protocols for these strategies is always highly desirable to the scientific community. In this study, the utilization of a single rhodium complex enabled the visible-light-induced late-stage C-H activation of biaryl-type phosphines with alkynyl bromides, employing inherent phosphorus atoms as directing groups. This chemistry combines P(III)-directed C-H activation with visible light photocatalysis, under exogenous photosensitizer-free conditions, offering a unique platform for ligand design and preparation. Furthermore, this study also explores the asymmetric catalysis and coordination chemistry of the resulting P-alkyne hybrid ligands with specific transition metals. Experimental results and density functional theory calculations demonstrate the mechanistic intricacies of this transformation.

Controlling Reactivity and Selectivity in the Nondirected C-H Activation of Arenes with Palladium

ConspectusAromatic structures are widespread motifs throughout organic chemistry, and C-H activation has been recognized as a major tool for enabling their sustainable and efficient functionalization. Through C-H activation, arenes can be modified without the need for prefunctionalization, leading to inherent atom- and step-economic advantages over traditional methods. However, for the development of synthetically useful methods, several hurdles have to be overcome. The strength of C-H bonds necessitates the development of sufficiently reactive catalysts, while the presence of multiple C-H bonds within a substrate poses challenges in terms of site-selectivity. Traditionally these challenges have been addressed by substrate control. By attaching different directing groups (DGs), the reactivity of the respective arene was significantly enhanced and the DG guided the metal in close proximity to specific C-H bonds, resulting in high site-selectivity. However, the introduction and removal of the DG add additional steps to the synthetic sequence, and the scope of the reaction is limited to a specific substrate class. The development of complementary nondirected methods that can be applied to a broad range of arenes without the necessity to carry a specific functional group that coordinates to Pd (referred to as simple arenes) is therefore highly desirable. However, the intrinsically lower reactivity of such substrates and the absence of a selectivity-determining DG pose significant challenges that can be solved only by the development of highly efficient catalysts. Consequently, the field of nondirected C-H activation, especially with respect to Pd-catalyzed methods, remained comparatively underdeveloped when we initiated our research program in 2017. At that time, state-of-the-art methods required the arene to be used in large excess, precluding its use in late-stage functionalization. Since organopalladium species are among the most versatile synthetic intermediates, we realized that developing a system, which can effectively and selectively activate C-H bonds in simple arenes with the arene as the limiting reagent, would be a powerful tool in synthetic organic chemistry. This account summarizes our groups' research toward the development and application of catalytic systems offering this desired reactivity and focuses explicitly on Pd-catalyzed nondirected C-H functionalization reactions of arenes, where the arene is employed as a limiting reagent. After an introduction that summarizes the state of Pd-catalyzed C-H activation of arenes before 2017 and the associated challenges, experimental and mechanistic details about the development of the first arene-limited, nondirected C-H functionalization of simple arenes with palladium will be discussed. This reactivity was enabled by the identification and combination of two complementary ligands, an N-heterocycle and an amino acid-derived ligand. Afterward we will discuss the expansion of this dual-ligand approach to further arene-limited transformations. Finally, we describe two methodologies that originated from the observations we made during our studies, namely, the late-stage deuteration of simple arenes and a highly selective olefination method that uses noncovalent interactions to induce meta selectivity.

Ru(II)-Catalyzed Weakly Coordinating Carbonyl-Assisted Dialkynylation of (Hetero)Aryl Ketones

Functionalized aryl(heteroaryl) ketones are present in many natural products as key structural components and serve as basic synthetic building blocks for various organic transformation reactions. Therefore, the development of an effective and sustainable route for making these classes of compounds remains challenging yet highly desirable. Herein, we report a simple and efficient catalytic system for dialkynylation of aromatic/heteroaromatic ketones via a double C-H bond activation in the presence of less expensive ruthenium(II)-salt as a catalyst using the weakly and native carbonyl group as the desired directing group. The developed protocol is highly compatible, tolerant, and sustainable toward various functional groups. The synthetic utility of the developed protocol has been demonstrated through the scale-up synthesis and functional group transformation. Control experiments support the involvement of the base-assisted internal electrophilic substitution (BIES) reaction pathway.

Cp*Co(III)-Catalyzed C(8)-Nucleophilic Cascade Cyclization of Quinoline N-Oxide with 1,6-Enyne

The C(8)-selective nucleophilic cascade cyclization of quinoline N-oxide with easily derived 1,6-enyne from phenol derivatives is demonstrated. A variety of quinoline N-oxide and alkynes are discovered to be suitable for producing a library of quinoline N-oxide tethered cis-hydrobenzofurans with high yields and excellent functional group tolerance. The utility of the protocol has been accomplished by post-synthetic modification of the cyclized product. The mechanistic studies indicate a base-assisted internal electrophilic-type substitution (BIES)-type pathway for C-H bond activation, and electrospray ionization mass spectrometry (ESI-MS) analysis of the stoichiometric reaction confirmed the formation of a key five-membered cobaltacycle.

Mechanistic studies of the palladium-catalyzed S,O-ligand promoted C-H olefination of aromatic compounds

Pd-catalyzed C-H functionalization reactions of non-directed substrates have recently emerged as an attractive alternative to the use of directing groups. Key to the success of these transformations has been the discovery of new ligands capable of increasing both the reactivity of the inert C-H bond and the selectivity of the process. Among them, a new type of S,O-ligand has been shown to be highly efficient in promoting a variety of Pd-catalyzed C-H olefination reactions of non-directed arenes. Despite the success of this type of S,O-ligand, its role in the C-H functionalization processes is unknown. Herein, we describe a detailed mechanistic study focused on elucidating the role of the S,O-ligand in the Pd-catalyzed C-H olefination of non-directed arenes. For this purpose, several mechanistic tools, including isolation and characterization of reactive intermediates, NMR and kinetic studies, isotope effects and DFT calculations have been employed. The data from these experiments suggest that the C-H activation is the rate-determining step in both cases with and without the S,O-ligand. Furthermore, the results indicate that the S,O-ligand triggers the formation of more reactive Pd cationic species, which explains the observed acceleration of the reaction. Together, these studies shed light on the role of the S,O-ligand in promoting Pd-catalyzed C-H functionalization reactions.

Ru3 (CO)12 -Catalyzed Modular Assembly of Hemilabile Ligands by C-H Activation of Phosphines with Isocyanates

Hemilabile ligands have been applied extensively in transition metal catalysis, but preparations of these molecules typically require multistep synthesis. Here, modular assembly of diverse phosphine-amide ligands, including related axially chiral compounds, is first reported through ruthenium-catalyzed C-H activation of phosphines with isocyanate directed by phosphorus(III) atoms. High reactivity and regioselectivity can be obtained by using a Ru₃ (CO)₁₂ catalyst with a mono-N-protected amino acid ligand. This transformation significantly expands the pool of phosphine-amide ligands, some of which have shown excellent efficiency for asymmetric catalysis. More broadly, the discovery constitutes a proof of principle for facile construction of hemilabile ligands directly from the parent monodentate phosphines by C-H activation with ideal atom, step and redox economy. Several dinuclear ruthenium complexes were characterized by single-crystal X-ray diffraction analysis revealing the key mechanistic features of this transformation.

Ru(II)-Catalyzed Hydroarylation of in situ Generated 3,3,3-Trifluoro-1-propyne by C-H Bond Activation: A Facile and Practical Access to β-Trifluoromethylstyrenes

In this study, a practical and straightforward synthesis of β-(E)-trifluoromethylstyrenes by ruthenium-catalyzed C-H bond activation was developed. The readily available and inexpensive 2-bromo-3,3,3-trifluoropropene (BTP), a non-ozone depleting reagent, was used as a reservoir of 3,3,3-trifluoropropyne. With this approach, the monofunctionalization of a panel of heteroarenes was possible in a safe and scalable manner (23 examples, up to 87 % yield). Mechanistic investigations and density functional theory (DFT) calculations were also conducted to get a better understanding of the mechanism of this transformation. These studies suggested that 1) a cyclometallated ruthenium complex enabled the transformation, 2) this complex exhibited high efficiency in this transformation compared to the commercially available [RuCl2 (p-cymene)]2 and 3) the mechanism proceeded through a bis-cyclometallated ruthenium intermediate for the carboruthenation step.

Ruthenaelectro-catalyzed C-H acyloxylation for late-stage tyrosine and oligopeptide diversification

Ruthenaelectro(ii/iv)-catalyzed intermolecular C-H acyloxylations of phenols have been developed by guidance of experimental, CV and computational insights. The use of electricity bypassed the need for stoichiometric chemical oxidants. The sustainable electrocatalysis strategy was characterized by ample scope, and its unique robustness enabled the late-stage C-H diversification of tyrosine-derived peptides.

Overcoming the Challenges toward Selective C(6)-H Functionalization of 2-Pyridone with Maleimide through Mn(I)-Catalyst: Easy Access to All-Carbon Quaternary Center

An earth-abundant and inexpensive Mn(I)-catalyzed alkylation of 2-pyridone with maleimide has been reported for the first time, in contrast to previously reported Diels-Alder products. Notably, an unexpected rearrangement has been discovered in the presence of acetic acid, which also provides a unique class of compounds bearing three different N-heterocycles with an all-carbon quaternary center. Furthermore, single crystal X-ray and HRMS revealed a five-membered manganacycle intermediate. This methodology tolerates a wide variety of functional groups delivering the alkylated products in moderate to excellent yields.

Palladium-catalysed cyclisation of ynamides and propargyl tethered iodosulfonamides with boronic acids leading to benzosultams

An efficient and straightforward Pd-catalysed synthesis of diversely substituted sultams utilising ynamides and boronic acids is disclosed; toluene was found to be the most suitable solvent for this transformation. This strategy has been successfully applied to generate dihydrobenzo[d]isothiazole 1,1-dioxides and dihydro-2H-benzo[e][1,2]thiazine 1,1-dioxides. The advantages of this protocol are good functional group tolerance, broad substrate scope, high-yielding reaction and low catalyst loading to access benzofused sultams with five-/six-membered rings. The synthetic utility has been demonstrated by a gram-scale synthesis. A plausible catalytic cycle involving carbopalladation has been proposed for this transformation.

Acyl silane directed Cp*Rh(III)-catalysed alkylation/annulation reactions

Studies into the Cp*Rh(iii)-catalysed hydroarylation of alkenes with aryl acyl silanes led to the discovery of a new synthetic strategy to access unique silicon derived indene frameworks. Rather than protodemetalation of the metal enolate formed following insertion of an alkene into the aryl C-H bond, intramolecular aldol condensation of the acyl silane occurred to generate a series of 2-formyl- and 2-acetyl-3-silyl indenes. This represents only the second example of rhodium-catalysed C-H functionalisation employing acyl silanes as weakly coordinating directing groups and the intramolecular aldol condensation strategy was extended to access analogous silicon derived benzofurans.

Ruthenium-Catalyzed Regioselective C(sp2)-H Activation/Annulation of N-(7-Azaindole)amides with 1,3-Diynes Using N-Amino-7-azaindole as the N,N-Bidentate Directing Group

The ruthenium(II)-catalyzed regioselective annulation of N-(7-azaindole)amides with 1,3-diynes has been demonstrated. Bioactive N-amino-7-azaindole has been used as a new bidentate directing group to furnish an array of 3-alkynylated isoquinolones. Furthermore, the developed protocol works efficiently for both aryl- and heteroaryl-substituted amides producing a range of pharmacologically useful 7-azaindole-based isoquinolones with a wide range of functionality.

Rhodium-catalyzed enone carbonyl directed C–H activation for the synthesis of indanones containing all-carbon quaternary centers

Rhodium(iii)-catalyzed enone carbonyl directed C–H activation/annulation of α-aroyl ketene dithioacetals with diazo compounds has been realized for the synthesis of β-quaternary indanones.

Rh(iii)-Catalyzed C–H allylation/annulative Markovnikov addition with 5-methylene-1,3-dioxan-2-one: formation of isoquinolinones containing a C3 quaternary centre

Rh(iii)-Catalyzed C–H allylation/annulative Markovnikov addition reaction was disclosed, offering isoquinolinones containing a C3 quaternary centre. By using this method as the key step, the US28 inverse agonist analogs were synthesized.

Insights into Ruthenium(II/IV)-Catalyzed Distal C-H Oxygenation by Weak Coordination

C-H hydroxylation of aryl acetamides and alkyl phenylacetyl esters was accomplished via challenging distal weak O-coordination by versatile ruthenium(II/IV) catalysis. The ruthenium(II)-catalyzed C-H oxygenation of aryl acetamides proceeded through C-H activation, ruthenium(II/IV) oxidation and reductive elimination, thus providing step-economical access to valuable phenols. The p-cymene-ruthenium(II/IV) manifold was established by detailed experimental and DFT-computational studies.

C7-Indole Amidations and Alkenylations by Ruthenium(II) Catalysis

C7-H-functionalized indoles are ubiquitous structural units of biological and pharmaceutical compounds for numerous antiviral agents against SARS-CoV or HIV-1. Thus, achieving site-selective functionalizations of the C7-H position of indoles, while discriminating among other bonds, is in high demand. Herein, we disclose site-selective C7-H activations of indoles by ruthenium(II) biscarboxylate catalysis under mild conditions. Base-assisted internal electrophilic-type substitution C-H ruthenation by weak O-coordination enabled the C7-H functionalization of indoles and offered a broad scope, including C-N and C-C bond formation. The versatile ruthenium-catalyzed C7-H activations were characterized by gram-scale syntheses and the traceless removal of the directing group, thus providing easy access to pharmaceutically relevant scaffolds. Detailed mechanistic studies through spectroscopic and spectrometric analyses shed light on the unique nature of the robust ruthenium catalysis for the functionalization of the C7-H position of indoles.

Cobalt-Catalyzed Oxidative C-H Activation: Strategies and Concepts

Inexpensive cobalt-catalyzed oxidative C-H functionalization has emerged as a powerful tool for the construction of C-C and C-Het bonds, which offers unique potential for transformative applications to modern organic synthesis. In the early stage, these transformations typically required stoichiometric and toxic transition metals as sacrificial oxidants; thus, the formation of metal-containing waste was inevitable. In contrast, naturally abundant molecular O₂ has more recently been successfully employed as a green oxidant in cobalt catalysis, thus considerably improving the sustainability of such transformations. Recently, a significant momentum was gained by the use of electricity as a sustainable and environmentally benign redox reagent in cobalt-catalyzed C-H functionalization, thereby preventing the consumption of cost-intensive chemicals while at the same time addressing the considerable safety hazards related to the use of molecular oxygen in combination with flammable organic solvents. Considering the unparalleled potential of the aforementioned approaches for sustainable green synthesis, this Review summarizes the recent progress in cobalt-catalyzed oxidative C-H activation until early 2020.

Insights into Cobalta(III/IV/II)-Electrocatalysis: Oxidation-Induced Reductive Elimination for Twofold C-H Activation

The merger of cobalt‐catalyzed C−H activation and electrosynthesis provides new avenues for resource‐economical molecular syntheses, unfortunately their reaction mechanisms remain poorly understood. Herein, we report the identification and full characterization of electrochemically generated high‐valent cobalt(III/IV) complexes as crucial intermediates in electrochemical cobalt‐catalyzed C−H oxygenations. Detailed mechanistic studies provided support for an oxidatively‐induced reductive elimination via highly‐reactive cobalt(IV) intermediates. These key insights set the stage for unprecedented cobaltaelectro two‐fold C−H/C−H activation.

Diverse Approaches for Enantioselective C-H Functionalization Reactions Using Group 9 Cpx MIII Catalysts

Transition-metal-catalyzed C-H functionalization reactions with Cp*M^III catalysts (M=Co, Rh, Ir) have found a wide variety of applications in organic synthesis. Albeit the intrinsic difficulties in achieving catalytic stereocontrol using these catalysts due to their lack of additional coordination sites for external chiral ligands and the conformational flexibility of the Cp ligand, catalytic enantioselective C-H functionalization reactions using the Group 9 metal triad with Cp-type ligands have been intensively studied since 2012. In this minireview, the progress in these reactions according to the type of the chiral catalyst used are summarized and discussed. The development of chiral Cp^x ligands the metal complexes thereof, artificial metalloenzymes, chiral carboxylate-assisted enantioselective C-H activations, enantioselective alkylations assisted by chiral carboxylic acids or chiral sulfonates, and chiral transient directing groups are discussed.

Base-Assisted C-H Bond Cleavage in Cross-Coupling: Recent Insights into Mechanism, Speciation, and Cooperativity

This review analyzes recent mechanistic studies that have provided new insights into how the structure of a metal complex influences the rate and selectivity of base-assisted C-H cleavage. Partitioning a broader mechanistic continuum into classes delimited by the polarization between catalyst and substrate during C-H cleavage is postulated as a method to identify catalysts favoring electrophilic or nucleophilic reactivity patterns, which may be predictive based on structural features of the metal complex (i.e., oxidation state, d-electron count, charge). Multi-metallic cooperativity and polynuclear speciation also provide new avenues to affect energy barriers for C-H cleavage and site selectivity beyond the limitations of single metal catalysts. An improved understanding of mechanistic nuances and structure-activity relationships on this important bond activation step carries important implications for efficiency and controllable site selectivity in non-directed C-H functionalization.

Steric and electronic effects on acetate-assisted cyclometallation of 2-phenylpyridines at [MCl2Cp*]2 (M = Ir, Rh)

The reactions of substituted 2-phenylpyridines at [MCl2Cp*]2 dimers (M = Ir, Rh) in the presence of NaOAc form cyclometallated complexes Cp*M(Phpyr)Cl. H/D exchange experiments and substrate competition experiments show that kinetic selectivity favours electron donating substituents whilst substrates with electron withdrawing substituents are favoured thermodynamically. Experiments with Ir are mostly irreversible under the conditions used whilst those for Rh are more easily reversible. For meta-substituted phenylpyridines steric effects are important, larger substituents leading to formation of the para-substituted cyclometallated product.

C-H Oxygenation Reactions Enabled by Dual Catalysis with Electrogenerated Hypervalent Iodine Species and Ruthenium Complexes

The catalytic generation of hypervalent iodine(III) reagents by anodic electrooxidation was orchestrated towards an unprecedented electrocatalytic C-H oxygenation of weakly coordinating aromatic amides and ketones. Thus, catalytic quantities of iodoarenes in concert with catalytic amounts of ruthenium(II) complexes set the stage for versatile C-H activations with ample scope and high functional group tolerance. Detailed mechanistic studies by experiment and computation substantiate the role of the iodoarene as the electrochemically relevant species towards C-H oxygenations with electricity as a sustainable oxidant and molecular hydrogen as the sole by-product. para-Selective C-H oxygenations likewise proved viable in the absence of directing groups.

Metalla-electrocatalyzed C-H Activation by Earth-Abundant 3d Metals and Beyond

To improve the efficacy of molecular syntheses, researchers wish to capitalize upon the selective modification of otherwise inert C-H bonds. The past two decades have witnessed considerable advances in coordination chemistry that have set the stage for transformative tools for C-H functionalizations. Particularly, oxidative C-H/C-H and C-H/Het-H transformations have gained major attention because they avoid all elements of substrate prefunctionalization. Despite considerable advances, oxidative C-H activations have been dominated by precious transition metal catalysts based on palladium, ruthenium, iridium, and rhodium, thus compromising the sustainable nature of the overall C-H activation approach. The same holds true for the predominant use of stoichiometric chemical oxidants for the regeneration of the active catalyst, prominently featuring hypervalent iodine(III), copper(II), and silver(I) oxidants. Thereby, stoichiometric quantities of undesired byproducts are generated, which are preventive for applications of C-H activation on scale. In contrast, the elegant merger of homogeneous metal-catalyzed C-H activation with molecular electrosynthesis bears the unique power to achieve outstanding levels of oxidant and resource economy. Thus, in contrast to classical electrosyntheses by substrate control, metalla-electrocatalysis holds huge and largely untapped potential for oxidative C-H activations with unmet site selectivities by means of catalyst control. While indirect electrolysis using precious palladium complexes has been realized, less toxic and less expensive base metal catalysts feature distinct beneficial assets toward sustainable resource economy. In this Account, I summarize the emergence of electrocatalyzed C-H activation by earth-abundant 3d base metals and beyond, with a topical focus on contributions from our laboratories through November 2019. Thus, cobalt electrocatalysis was identified as a particularly powerful platform for a wealth of C-H transformations, including C-H oxygenations and C-H nitrogenations as well as C-H activations with alkynes, alkenes, allenes, isocyanides, and carbon monoxide, among others. As complementary tools, catalysts based on nickel, copper, and very recently iron have been devised for metalla-electrocatalyzed C-H activations. Key to success were detailed mechanistic insights, prominently featuring oxidation-induced reductive elimination scenarios. Likewise, the development of methods that make use of weak O-coordination benefited from crucial insights into the catalyst's modes of action by experiment, in operando spectroscopy, and computation. Overall, metalla-electrocatalyzed C-H activations have thereby set the stage for molecular syntheses with unique levels of resource economy. These electrooxidative C-H transformations overall avoid the use of chemical oxidants and are frequently characterized by improved chemoselectivities. Hence, the ability to dial in the redox potential at the minimum level required for the desired transformation renders electrocatalysis an ideal platform for the functionalization of structurally complex molecules with sensitive functional groups. This strategy was, inter alia, successfully applied to scale-up by continuous flow and the step-economical assembly of polycyclic aromatic hydrocarbons.

Chelation-assisted transition metal-catalysed C–H chalcogenylations

This review summarizes recent advances in C–S and C–Se formationsviatransition metal-catalyzed C–H functionalization utilizing directing groups to control the site-selectivity.