Enhancing the Water Stability of Al-MIL-101-NH2via Postsynthetic Modification

New design to enhance phosphonate selective removal from water by MOF confined in hyper-cross-linked resin

Although polymeric anion exchange resins can remove phosphonates, they lack selectivity for target phosphonates and are susceptible to interference by anions and other substances. Here, we developed a novel strategy via confining MIL-101(Fe)-NH2 inside commercial resins IRA-900 for high-efficient and precise phosphonate removal, accompanying with the improvement of the stability and recovery of MIL-101(Fe)-NH2. The obtained nanocomposite MIL-101(Fe)-NH2@IRA-900 (MFNI) exhibited significantly enhanced phosphonate removal in the presence of competing anions (Cl-, SO42-, NO3- and CO32-) and natural organic matter (humic acid) at high concentrations (2-4 times of phosphonate concentration). Moreover, MFNI displayed the highest phosphonate adsorption capacity (12.9 mg P/g) and the fastest adsorption kinetics (120 min) than hydrated ferric oxides modified IRA-900 (HFOI) (6.7 mg P/g, 180 min), MIL-101(Fe)-NH2 (7.6 mg P/g, 240 min) and IRA-900 (5.6 mg P/g, 360 min). Such higher adsorption affinity and anti-interference ability came from the synergistic effect of the host IRA-900 (hydrogen-bond interaction and electrostatic attraction) and the embedded MIL-101(Fe)-NH2 (ligand exchange). The depleted MFNI could be regenerated with a binary NaOH-NaCl solution and reused without significant loss of capacity. Column adsorption runs by using MFNI indicated the fresh MFNI could achieve 100 % removal of PPOA in 10.5 h continuously feeding, which offered the possibility of achieving potential large-scale applications. In general, a new MOF-confined design approach was practiced to achieve selective elimination of phosphates and to improve the stability and recovery of MOF.

Metal-Organic Frameworks for Water Harvesting and Concurrent Carbon Capture: A Review for Hygroscopic Materials

As water scarcity becomes a pending global issue, hygroscopic materials prove a significant solution. Thus, there is a good cause following the structure-performance relationship to review the recent development of hygroscopic materials and provide inspirational insight into creative materials. Herein, traditional hygroscopic materials, crystalline frameworks, polymers, and composite materials are reviewed. The similarity in working conditions of water harvesting and carbon capture makes simultaneously addressing water shortages and reduction of greenhouse effects possible. Concurrent water harvesting and carbon capture is likely to become a future challenge. Therefore, an emphasis is laid on metal-organic frameworks (MOFs) for their excellent performance in water and CO2 adsorption, and representative role of micro- and mesoporous materials. Herein, the water adsorption mechanisms of MOFs are summarized, followed by a review of MOF's water stability, with a highlight on the emerging machine learning (ML) technique to predict MOF water stability and water uptake. Recent advances in the mechanistic elaboration of moisture's effects on CO2 adsorption are reviewed. This review summarizes recent advances in water-harvesting porous materials with special attention on MOFs and expects to direct researchers' attention into the topic of concurrent water harvesting and carbon capture as a future challenge.

MOF-Based Solid-State Proton Conductors Obtained by Intertwining Protic Ionic Liquid Polymers with MIL-101

Solid-state proton conductors based on the use of metal-organic framework (MOF) materials as proton exchange membranes are being investigated as alternatives to the current state of the art. This study reports a new family of proton conductors based on MIL-101 and protic ionic liquid polymers (PILPs) containing different anions. By first installing protic ionic liquid (PIL) monomers inside the hierarchical pores of a highly stable MOF, MIL-101, then carrying out polymerization in situ, a series of PILP@MIL-101 composites was synthesized. The resulting PILP@MIL-101 composites not only maintain the nanoporous cavities and water stability of MIL-101, but the intertwined PILPs provide a number of opportunities for much-improved proton transport compared to MIL-101. The PILP@MIL-101 composite with HSO4 - anions shows superprotonic conductivity (6.3 × 10-2  S cm-1 ) at 85 °C and 98% relative humidity. The mechanism of proton conduction is proposed. In addition, the structures of the PIL monomers were determined by single crystal X-ray analysis, which reveals many strong hydrogen bonding interactions with O/NH···O distances below 2.6 Å.

Metal-organic frameworks for wastewater treatment: Recent developments, challenges, and future prospects

Wastewater treatment is critically important for the existence of life on earth; however, this approach involves the removal of toxic metal contaminants and organic pollutants, requiring efficient adsorbent materials. Within this agenda, metal-organic frameworks (MOFs) appear to be potential materials due to their unique properties as efficient adsorbents, effective photocatalysts, and reliable semi-permeable membranes. Therefore, MOFs have undergone various modifications over the years without desirable success to improve adsorption capacity, hydro-stability, reaction kinetics, and reusability. Therefore, scientists around the world got engaged in MOF research for novel modifications, including defect engineering, carbonization, and membrane fabrication, at the laboratory scale. This review focuses on developing MOF-based adsorbents, photocatalysts, and semi-permeable membranes for wastewater treatment since 2015, emphasizing their structural-functional relationships. Finally, the challenges and opportunities with MOFs in wastewater treatment are also underlined for future efforts.

Facile and efficient preparation of amino bearing metal-organic frameworks-coated cotton fibers for solid-phase extraction of non-steroidal anti-inflammatory drugs in human plasma

The determination of blood concentration of non-steroidal anti-inflammatory drugs (NSAIDs) is highly desired in clinical practice. In this work, three amino bearing metal-organic frameworks (amino-MOFs) coated cotton fibers were prepared using a facile cysteine-triggered in situ growth strategy and proposed as in-tip solid-phase microextraction (in-SPME) adsorbents for efficient extraction of non-steroidal anti-inflammatory drugs from human plasma. The self-made adsorbents exhibited satisfactory extraction performance toward three NSAIDs including diclofenac sodium, ketoprofen and flurbiprofen. Under the optimized conditions, the established method exhibited satisfactory enrichment performance, low limits of detection and excellent extraction efficiency. Good reproducibility, wide linear range, excellent linearity and satisfactory sensitivity were obtained in the experiment. The method was also used for the enrichment and determination of NSAIDs in human plasma samples. Good recoveries were obtained, ranging from 66.5% to 98.9% with relative standard deviations less than 6.62%. The good performance of amino-MOFs was due to the synergistic effects arising from grafted charged amino groups within ordered pores of suitable size, leading to strong affinity towards guest molecules. Electrostatic interaction, hydrogen bond and π-π interaction played a vital role in the extraction of NSAIDs. This report indicated the potential of amino-MOFs as efficient adsorbents for the determination of NSAIDs from human plasma.

Construction of hexagonal spindle-shaped Fe-MOFs induced by cationic copolymer and its application for effective wastewater treatment

The environment and human health are in danger due to the long-term enrichment and buildup of organic pesticides, dyes, and harmful microbes in wastewater. The development of functional materials that are efficient for treating wastewater remains a significant problem. Eco-friendly hexagonal spindle-shaped Fe-MOFs (Hs-FeMOFs) were created in this study under the influence of cationic copolymer (PMSt). The mechanism of crystal growth and development of its unique morphology were described after looking into impact factors for the ideal circumstances and being characterized by XRD, TEM, XPS, and other techniques. It revealed that Hs-FeMOFs possess an enormous supply of adsorption active sites, a strong electropositivity, and the nanometer tip. Then, typical organic pollutants, such as herbicides and mixed dyes, as well as biological pollutants bacteria, were chosen to assess its efficacy in wastewater treatment. It was discovered that the pendimethalin could be quickly removed in wastewater and the removal rate reached 100% within 10 min. In separation of mixed dyes, the retention rate of malachite green (MG) reached 92.3% in 5 min and with a minimum inhibitory concentration of 0.8 mg/mL and demonstrated strong activity due to the presence of cationic copolymers. In actual water matrix, Hs-FeMOF could also play excellent adsorption and antibacterial activity. In summary, a novel, environmentally friendly MOF material with good activity was successfully created by cationic copolymer induction. It offers a fresh approach to develop functional materials in wastewater treatment.

Post-synthesis functionalization of ZIF-90 with sulfonate groups for high proton conduction

Introducing sulfonic acid groups into MOF materials is one of the effective approaches to enhance proton conduction. Here, we attempted to prepare a new post-modified ZIF-90-based material by addition reaction of the aldehyde group with bisulfite to obtain partially functionalized ZIF-90-SO₃Na_(2.3). ZIF-90-SO₃Na_(2.3) exhibits a high proton conductivity of 2.26 × 10^-2 S cm^-1 at 98% RH and 100 °C.

Enhancement of aqueous stability of NH2-MIL-101(Fe) by hydrophobic grafting post-synthetic modification

The development of water-stable metal-organic frameworks is a critical issue for their photocatalysis applications in water treatment. A phenyl-ethyl side chain with low surface energy was grafted into NH₂-MIL-101(Fe) through a post-synthetic modification (PSM) method. As a result, a novel MIL-101(Fe)-1-(4-(ethyl)phenyl)urea (named MIL-101(Fe)-EPU) was synthesized. Basic morphology, crystal structure, and chemical bond features of MIL-101(Fe)-EPU were retained after PSM. Nitrogen X-ray photoelectron spectroscopy analysis confirmed the successful introduction of the phenyl-ethyl side chain, and this transformation increased its hydrophobicity and water stability. Contact angles of MIL-101(Fe)-EPU to water raised from 59.6 to 140.4°. And its structure maintained intact after 72 h water exposure, indicating higher stability than parent NH₂-MIL-101(Fe). In the photocatalysis reaction with visible light and oxidant donor (H₂O₂), MIL-101(Fe)-EPU demonstrated a degradation efficiency of tetrabromobisphenol A with a reaction rate at 0.0313 min^-1. The predominant reaction mechanism was OH·oxidation. The acid condition was beneficial for this photocatalysis reaction and high stability was observed. Besides, photocatalysis efficiency, crystal structure, and chemical structures were all retained in different actual water mediums, suggesting high adaptability of MIL-101(Fe)-EPU. In general, hydrophobic group grafting using a PSM method endows MIL-101(Fe)-EPU the potentiality as photocatalyst for organic contaminant elimination from water.

Breathing Effect via Solvent Inclusions on the Linker Rotational Dynamics of Functionalized MIL-53

The breathing effects of functionalized MIL-53-X (X=H, CH₃ , NH₂ , OH, and NO₂ ) induced by the inclusions of water, methanol, acetone, and N,N-dimethylformamide solvents were comprehensively investigated by solid-state NMR spectroscopy. 2D homo-nuclear correlation NMR provided direct experimental evidence for the host-guest interaction between the guest solvents and the MOF frameworks. The variations of the ¹ H and ¹³ C NMR chemical shifts in functionalized MIL-53 from the narrow pore phase transitions to large pore forms due to solvent inclusions were clearly identified. The influence of functionalized linkers and their host-guest interactions with the confined solvents on the rotational dynamics of the linkers was examined by separated-local-field MAS NMR experiments in conjunction with DFT theoretical calculations. It is found that the linker rotational dynamics of functionalized MIL-53 in narrow pore form is closely related to the computational rotational energy barrier. The BDC-NO₂ linker of activated MIL-53-NO₂ undergoes relatively faster rotation, whereas the BDC-NH₂ and BDC-OH linkers of activated MIL-53-NH₂ and MIL-53-OH exhibit relatively slower rotation. The host-guest interactions between confined solvents and MIL-53-NO₂ , MIL-53-CH₃ would significantly induce an increase of the order parameters of unsubstituted carbon and reduce the rotational frequency of linkers. This study provides a spectroscopic approach for the investigation of linker rotation in functionalized MOFs at natural abundance with solvents inclusions.

Enhanced Fungicidal Efficacy by Co-Delivery of Azoxystrobin and Diniconazole with Cauliflower-Like Metal-Organic Frameworks NH2-Al-MIL-101

Long-term use of a single fungicide increases the resistance risk and causes adverse effects on natural ecosystems. Controlled release formulations of dual fungicides with different modes of action can afford a new dimension for addressing the current issues. Based on adjustable aperture and superhigh surface area, metal-organic frameworks (MOFs) are ideal candidates as pesticide release carriers. This study used Al3+ as the metal node and 2-aminoterephthalic acid as the organic chain to prepare aluminum-based metal-organic framework material (NH2-Al-MIL-101) with "cauliflower-like" structure and high surface area of 2359.0 m2/g. Fungicides of azoxystrobin (AZOX) and diniconazole (Dini) were simultaneously encapsulated into NH2-Al-MIL-101 with the loading content of 6.71% and 29.72%, respectively. Dual fungicide delivery system of AZOX@Dini@NH2-Al-MIL-101 demonstrated sustained and pH responsive release profiles. When the maximum cumulative release rate of AZOX and Dini both reached about 90%, the release time was 46 and 136 h, respectively. Furthermore, EC50 values as well as the percentage of inhibition revealed that AZOX@Dini@NH2-Al-MIL-101 had enhanced germicidal efficacy against rice sheath blight (Rhizoctonia solani), evidenced by the synergistic ratio of 1.83. The present study demonstrates a potential application prospect in sustainable plant protection through co-delivery fungicides with MOFs as a platform.

Enhanced ammonia adsorption and separation by a molecularly imprinted polymer after acid hydrolysis of its ester crosslinker

While ammonia (NH₃) is one of the primary hazardous emissions from sludge aerobic composting plants, it has the potential to be recycled as an energy source or nitrogen fertilizer. Recently, an NH₃ molecularly imprinted polymer (NH₃-MIP) was developed that efficiently separated NH₃ from other compounds, but its adsorption capacity required improvement. This study improved both NH₃ adsorption capacity and separation of the NH₃-MIP using acid hydrolysis optimization. NH₃ adsorption capacity increased 13-fold and remained between 5.59 and 7.84 mmol·g^-1 during simulated sludge aerobic composting. Separation factors for NH₃/methyl sulfide (DMS) (i.e. NH₃ adsorption capacity/DMS adsorption capacity) and NH₃/dimethyl disulfide both increased more than 15-fold. Results showed that hydrolysis of the ester crosslinker, ethylene glycol dimethacrylate, on the NH₃-MIPs produced chemical adsorption sites (‒COOH and epoxides) and increased hydrogen bonds (‒COOH and alcohol hydroxyl), which promoted NH₃ adsorption and separation. It is expected that this will be a beneficial strategy for elimination of odors and NH₃ recovery during sludge aerobic composting.

Heterogenisation of polyoxometalates and other metal-based complexes in metal–organic frameworks: from synthesis to characterisation and applications in catalysis

This review provides a thorough overview of composites with molecular catalysts (polyoxometalates, or organometallic or coordination complexes) immobilised into MOFs via non-covalent interactions.

Water and Metal-Organic Frameworks: From Interaction toward Utilization

The steep stepwise uptake of water vapor and easy release at low relative pressures and moderate temperatures together with high working capacities make metal-organic frameworks (MOFs) attractive, promising materials for energy efficient applications in adsorption devices for humidity control (evaporation and condensation processes) and heat reallocation (heating and cooling) by utilizing water as benign sorptive and low-grade renewable or waste heat. Emerging MOF-based process applications covered are desiccation, heat pumps/chillers, water harvesting, air conditioning, and desalination. Governing parameters of the intrinsic sorption properties and stability under humid conditions and cyclic operation are identified. Transport of mass and heat in MOF structures, at least as important, is still an underexposed topic. Essential engineering elements of operation and implementation are presented. An update on stability of MOFs in water vapor and liquid systems is provided, and a suite of 18 MOFs are identified for selective use in heat pumps and chillers, while several can be used for air conditioning, water harvesting, and desalination. Most applications with MOFs are still in an exploratory state. An outlook is given for further R&D to realize these applications, providing essential kinetic parameters, performing smart engineering in the design of systems, and conceptual process designs to benchmark them against existing technologies. A concerted effort bridging chemistry, materials science, and engineering is required.

Ion-Exchange Fabrication of Hierarchical Al-MOF-Based Resin Catalysts for the Tandem Reaction

Metal-organic framework (MOF)-supported macroscale resin catalysts, IRA900(xOH)-MIL-101(Al)-NH₂ (x means the concentration of NaOH), with spatially isolated antagonistic acid-base active sites were successfully synthesized through a novel strategy by ion exchange and in situ solvothermal methods. The hierarchical pore system of the as-prepared catalysts effectively promotes the mass transfer and contacts with catalytic active centers during the organic reactions. Therefore, the environmentally friendly catalysts exhibit excellent superior activity and stability in one-pot deacetalization-Knoevenagel condensation reaction, and the yield by optimal IRA900(0.2OH)-MIL-101(Al)-NH₂ reaches close to 99% after 5 h at 110 °C. Thanks to the millimeter-sized resin carrier and robust sphere morphology, the recycling of the as-prepared catalysts only requires natural sedimentation. This work presents an effective strategy to build low-toxic acid-base catalysts by combining the advantages of ion-exchange resins and functionalized MOF materials.

Hydrophobic Metal-Organic Frameworks: Assessment, Construction, and Diverse Applications

Tens of thousands of metal-organic frameworks (MOFs) have been developed in the past two decades, and only ≈100 of them have been demonstrated as porous and hydrophobic. These hydrophobic MOFs feature not only a rich structural variety, highly crystalline frameworks, and uniform micropores, but also a low affinity toward water and superior hydrolytic stability, which make them promising adsorbents for diverse applications, including humid CO2 capture, alcohol/water separation, pollutant removal from air or water, substrate-selective catalysis, energy storage, anticorrosion, and self-cleaning. Herein, the recent research advancements in hydrophobic MOFs are presented. The existing techniques for qualitatively or quantitatively assessing the hydrophobicity of MOFs are first introduced. The reported experimental methods for the preparation of hydrophobic MOFs are then categorized. The concept that hydrophobic MOFs normally synthesized from predesigned organic ligands can also be prepared by the postsynthetic modification of the internal pore surface and/or external crystal surface of hydrophilic or less hydrophobic MOFs is highlighted. Finally, an overview of the recent studies on hydrophobic MOFs for various applications is provided and suggests the high versatility of this unique class of materials for practical use as either adsorbents or nanomaterials.

One-pot synthesis of bimetallic metal–organic frameworks (MOFs) as acid–base bifunctional catalysts for tandem reaction

Bimetallic MIL-101(Al/Fe)–NH₂ exhibits enhanced acid–base bifunctional catalytic activity due to its synergistic mechanism and hierarchical pore system.

Improving MOF stability: approaches and applications

This review summarizes recent advances in the design and synthesis of stable MOFs and highlights the relationships between the stability and functional applications.

Metal–organic frameworks (MOFs) have been recognized as one of the most important classes of porous materials due to their unique attributes and chemical versatility. Unfortunately, some MOFs suffer from the drawback of relatively poor stability, which would limit their practical applications. In the recent past, great efforts have been invested in developing strategies to improve the stability of MOFs. In general, stable MOFs possess potential toward a broader range of applications. In this review, we summarize recent advances in the design and synthesis of stable MOFs and MOF-based materials via de novo synthesis and/or post-synthetic structural processing. Also, the relationships between the stability and functional applications of MOFs are highlighted, and finally, the subsisting challenges and the directions that future research in this field may take have been indicated.

Hydrophobic Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have diverse potential applications in catalysis, gas storage, separation, and drug delivery because of their nanoscale periodicity, permanent porosity, channel functionalization, and structural diversity. Despite these promising properties, the inherent structural features of even some of the best-performing MOFs make them moisture-sensitive and unstable in aqueous media, limiting their practical usefulness. This problem could be overcome by developing stable hydrophobic MOFs whose chemical composition is tuned to ensure that their metal-ligand bonds persist even in the presence of moisture and water. However, the design and fabrication of such hydrophobic MOFs pose a significant challenge. Reported syntheses of hydrophobic MOFs are critically summarized, highlighting issues relating to their design, characterization, and practical use. First, wetting of hydrophobic materials is introduced and the four main strategies for synthesizing hydrophobic MOFs are discussed. Afterward, critical challenges in quantifying the wettability of these hydrophobic porous surfaces and solutions to these challenges are discussed. Finally, the reported uses of hydrophobic MOFs in practical applications such as hydrocarbon storage/separation and their use in separating oil spills from water are summarized. Finally, the state of the art is summarized and promising future developments of hydrophobic MOFs are highlighted.

Synthesis and Functionalization of Porous Zr-Diaminostilbenedicarboxylate Metal-Organic Framework for Storage and Stable Delivery of Ibuprofen

A stable porous metal-organic framework (MOF), Zr-diaminostilbenedicarboxylate (Zr-DASDCA), was synthesized and modified with oxalyl chloride (OC) or terephthaloyl chloride (TC) to introduce various functional groups onto the Zr-DASDCA. Both pristine and functionalized Zr-DASDCAs, together with activated carbon, were used as a potential carrier for ibuprofen (IBU) storage and delivery. Zr-DASDCAs, especially the modified ones (OC-Zr-DASDCA and TC-Zr-DASDCA), showed competitive results in IBU delivery. Specifically, the release rate in phosphate-buffered saline solution at pH 7.4 was nearly constant (R 2 ≈ 0.98) for up to 10 days, which would be very effective in IBU dosing to the human body. Moreover, the release rate could be controlled by changing the pH of the releasing solution. The rate of IBU release from both pristine and modified Zr-DASDCAs at pH 7.4 and 3.0 was also explained with a few interactions such as H-bonding and electrostatic repulsion, together with the relative pore size of the Zr-DASDCAs. Therefore, the results suggested that functionalization of MOFs via postsynthetic modification, especially with OC and TC, to introduce various functional groups onto MOFs is an effective approach to not only reducing the release rate of IBU but also inducing a constant release of IBU for as long as 10 days.

A Switch in the Hydrophobic/Hydrophilic Gas-Adsorption Character of Prussian Blue Analogues: An Affinity Control for Smart Gas Sorption

Porous coordination polymers are molecule-based materials presenting a high degree of tunability, which offer many advantages for targeted applications over conventional inorganic materials. This work demonstrates that the hydrophilic/hydrophobic character of Prussian blue analogues having a lipophilic feature may be tuned to optimize the gas adsorption properties. The role of the coordinatively unsaturated metal sites is emphasized through a combination of theoretical and experimental study of water, ethanol, and n-hexane adsorption.

Exploring Local Disorder within CAU-1 Frameworks Using Hyperpolarized 129Xe NMR Spectroscopy

The sorption properties of metal-organic frameworks (MOFs) can be influenced by introducing covalently attached functional side chains, which make this subclass of porous materials promising for applications as diverse as gas storage and separation, catalysis, and drug delivery. The incorporation of side groups usually comes along with disorder, as the synthesis procedures rarely allow for one specific position among a larger group of equivalent sites to be selected. For a series of isoreticular CAU-1 frameworks, chosen as model compounds, one out of four positions at every linker is modified with equal probability. Here, we investigate the influence of this disorder on Ar sorption and ¹²⁹Xe nuclear magnetic resonance spectroscopy using hyperpolarized ¹²⁹Xe gas. Models used for predicting the pore dimensions as well as their distributions were derived from the unfunctionalized framework by replacing one proton at every linker with either an amino, an acetamide, or a methyl urea functionality. The resulting structures were optimized using density functional theory (DFT) calculations. Results from void analyses and Monte Carlo force field simulations suggest that for available Ar nonlocal DFT (NLDFT) kernels, neither the pore dimensions nor the distributions induced by the side-chain disorder are well-reproduced. By contrast, we found the ¹²⁹Xe chemical shift analysis for the shift observed at high temperature to be well-suited to develop a detailed fingerprint of the porosity and side-chain disorder within the isoreticular CAU-1 series. After calibrating the ¹²⁹Xe limiting shift of the amino-functionalized framework with DFT calculations, the downfield shifts for the other two derivatives are an excellent measure for the reduction of the accessible pore space and reveal a strong preference for the side chains toward the octahedral voids for both cases. We expect that the strategy presented here can be commonly applied to disorder phenomena within MOFs in the future.

Hydrolytic stability in hemilabile metal-organic frameworks

Highly porous metal-organic frameworks (MOFs), which have undergone exciting developments over the past few decades, show promise for a wide range of applications. However, many studies indicate that they suffer from significant stability issues, especially with respect to their interactions with water, which severely limits their practical potential. Here we demonstrate how the presence of 'sacrificial' bonds in the coordination environment of its metal centres (referred to as hemilability) endows a dehydrated copper-based MOF with good hydrolytic stability. On exposure to water, in contrast to the indiscriminate breaking of coordination bonds that typically results in structure degradation, it is non-structural weak interactions between the MOF's copper paddlewheel clusters that are broken and the framework recovers its as-synthesized, hydrated structure. This MOF retained its structural integrity even after contact with water for one year, whereas HKUST-1, a compositionally similar material that lacks these sacrificial bonds, loses its crystallinity in less than a day under the same conditions.

Emergence of Nonlinear Optical Activity by Incorporation of a Linker Carrying the p-Nitroaniline Motif in MIL-53 Frameworks

p-Nitroaniline presents the typical motif of a second-order nonlinear optically (NLO) active molecule. However, because of its crystallization in an antiparallel and hence centrosymmetric structure, the NLO activity is lost. In this contribution, the p-nitroaniline motif was built successfully into the MIL-53 metal-organic framework. More precisely, MIL-53 was synthesized with 2-amino-5-nitroterephthalate as organic linker, with Al³⁺, Ga³⁺, or In³⁺ as inorganic cation. The Al and Ga structures are polar, as confirmed by second-harmonic generation microscopy, yielding stable NLO materials. Indeed, they contain a 22-36% surplus of the dipolar 2-amino-5-nitro-terephthalate oriented in a parallel fashion. The indium compound was shown to be less crystalline and centrosymmetric. Ab initio modeling of the second-order NLO response shows that the Al and Ga materials show a response comparable to typical inorganic commercial NLO materials such as KDP. As a hybrid material, capable of low-temperature synthesis and processing and the ultrafast NLO responses associated with organic materials, this material can potentially provide an interesting venue for applications with respect to traditional inorganic NLO materials.

Anchorage of Au3+ into Modified Isoreticular Metal-Organic Framework-3 as a Heterogeneous Catalyst for the Synthesis of Propargylamines

Postsynthetic modification of metal-organic framework is a general and practical approach to access MOF-based catalysts bearing multiple active sites. The isoreticular metal-organic framework-3 (IRMOF-3) was modified with lactic acid through condensation reaction of the carboxyl group of lactic acid and amino group present in IRMOF-3 frameworks. Au3+ was subsequently anchored onto the metal-organic framework IRMOF-3 using postsynthetic modification. The synthezized IRMOF-3-LA-Au (LA = lactic acid) was characterized by powder X-ray diffraction, N2 adsorption-desorption, infrared spectroscopy, liquid-state nuclear magnetic resonance, thermogravimetric analysis, H2-temperature programmed reduction, transmission electro microscopy, and inductively coupled plasma-optical emission spectrometry. IRMOF-3-LA-Au acted as an efficient heterogeneous catalyst in the synthesis of propargylamines by three-component coupling reaction of aldehyde, alkyne, and amine. Moreover, the catalyst is applicable to various substituted substrates, including aromatic and aliphatic aldehydes, alkyl- and aryl-substituted terminal alkynes, and alicyclic amines. In addition, the catalyst can be easily separated from the mixture and can be reused for four consecutive cycles.

Reversible Low-Temperature Metal Node Distortion during Atomic Layer Deposition of Al2O3 and TiO2 on UiO-66-NH2 Metal-Organic Framework Crystal Surfaces

Metal-organic frameworks (MOFs) are chemically functionalized micro- and mesoporous materials with high surface areas and are attractive for multiple applications including filtration, gas storage, and catalysis. Postsynthetic modification (PSM), via solution or vapor-based techniques, is a way to impart additional complexity and functionality into these materials. There is a desire to shift toward vapor-phase methods in order to ensure more controlled modification and more efficient reagent and solvent removal from the modified MOF material. In this work we explore how the metal precursors titanium tetrachloride (TiCl₄) and trimethylaluminum (TMA), commonly used in atomic layer deposition, react with UiO-66-NH₂ MOF. Using in situ quartz crystal microbalance (QCM) and Fourier transform infrared spectroscopy (FTIR) at 150 and 250 °C, we find that the ALD precursors react with μ₃-OH hydroxyl and μ₃-O bridging oxygen groups on Zr₆ nodes, as well as oxygen from carboxylate linker groups. The reactions occur predominantly at the crystal surface at μ₃-OH hydroxyl sites, with TiCl₄ exhibiting greater diffusion into the MOF subsurface. FTIR analysis suggests that, at 150 °C, both TiCl₄ and TMA reversibly dehydroxylate the hydroxylated UiO-66-NH₂, which is accompanied by distortion of the zirconium metal clusters. Finally, we show that TiCl₄ is able to react with the dehydroxylated UiO-66-NH₂ structure, suggesting that TiCl₄ is also able to react directly with the bridging oxygens in the metal clusters or carboxylate groups on the organic ligand. A better understanding of chemical and thermally driven MOF dehydroxylation reactions can be important for improved postsynthetic modification of MOFs.

Water Adsorption Properties of NOTT-401 and CO2 Capture under Humid Conditions

The water-stable material NOTT-401 was investigated for CO₂ capture under humid conditions. Water adsorption properties of NOTT-401 were studied, and their correlation with CO₂ sequestration at different relative humidities (RHs) showed that the CO₂ capture increased from 1.2 wt % (anhydrous conditions) to 3.9 wt % under 5% RH at 30 °C, representing a 3.2-fold improvement.

Adsorption behavior of magnetic amino-functionalized metal–organic framework for cationic and anionic dyes from aqueous solution

The mechanisms of interactions such as electrostatic interaction, hydrogen bonding, and π–π stacking interaction were discussed for the adsorption of cationic and anionic dyes onto magnetic NH₂-MIL-101(Al).

A Post-Synthetically Modified MOF for Selective and Sensitive Aqueous-Phase Detection of Highly Toxic Cyanide Ions

Selective and sensitive detection of toxic cyanide (CN(-) ) by a post-synthetically altered metal-organic framework (MOF) has been achieved. A post-synthetic modification was employed in the MOF to incorporate the specific recognition site with the CN(-) ion over all other anions, such as Cl(-) , Br(-) , and SCN(-) . The aqueous-phase sensing and very low detection limit, the essential prerequisites for an effective sensory material, have been fulfilled by the MOF. Moreover, the present detection level meets the standard set by the World Health Organization (WHO) for the permissible limit of cyanide concentration in drinking water. The utilization of MOF-based materials as the fluorometric probes for selective and sensitive detection of CN(-) ions has not been explored till now.