Chiral perylene diimides: building blocks for ionic self-assembly

Investigations of Crucial Factors for the Non-Covalent Functionalization of Black Phosphorus (BP) using Perylene Diimide Derivatives for the Passivation of BP Nanosheets

The non-covalent functionalization of black phosphorus (BP) was studied with a scope of ten tailor-made perylene diimides (PDIs). A combination of UV/Vis-, fluorescence-, as well as Raman spectroscopy and atomic force microscopy was used to investigate the structural factors, which contribute to a pronounced PDI-BP interaction and thus support the protection of BP nanosheets against oxidative degradation. We were able to show, that water-soluble, amphiphilic PDIs with highly charged head groups can be used for the non-covalent functionalization of BP in aqueous media. Here, based on the hydrophobic effect, an efficient adsorption of the respective PDI molecules takes place and leads to the formation of a passivating film, yielding a considerable stabilization of the BP flakes under ambient conditions exceeding 30 days.

Semiconductive and Biocompatible Nanofibrils from the Self-Assembly of Amyloid π-Conjugated Peptides

Owing to their capacity to self-assemble into organized nanostructures, amyloid polypeptides can serve as scaffolds for the design of biocompatible semiconductive materials. Herein, symmetric and asymmetric amyloid π-conjugated peptides were prepared through condensation of perylene diimide (PDI) with a natural amyloidogenic sequence derived from the islet amyloid polypeptide. These PDI-bioconjugates assembled into long and linear nanofilaments in aqueous solution, which were characterized by a cross-β-sheet quaternary organization. Current-voltage curves exhibited a clear signature of semiconductors, whereas the cellular assays revealed cytocompatibility and potential application in fluorescence microscopy. Although the incorporation of a single amyloid peptide appeared sufficient to drive the self-assembly into organized fibrils, the incorporation of two peptide sequences at the PDI's imide positions significantly enhanced the conductivity of nanofibril-based films. Overall, this study exposes a novel strategy based on amyloidogenic peptide to guide the self-assembly of π-conjugated systems into robust, biocompatible, and optoelectronic nanofilaments.

Concepts and principles of self-n-doping in perylene diimide chromophores for applications in biochemistry, energy harvesting, energy storage, and catalysis

Self-doping is an essential method of increasing carrier concentrations in organic electronics that eliminates the need to tailor host-dopant miscibility, a necessary step when employing molecular dopants. Self-n-doping can be accomplished using amines or ammonium counterions as an electron source, which are being incorporated into an ever-increasingly diverse range of organic materials spanning many applications. Self-n-doped materials have demonstrated exemplary and, in many cases, benchmark performances in a variety of applications. However, an in-depth review of the method is lacking. Perylene diimide (PDI) chromophores are an important mainstay in the semiconductor literature with well-known structure-function characteristics and are also one of the most widely utilized scaffolds for self-n-doping. In this review, we describe the unique properties of self-n-doped PDIs, delineate structure-function relationships, and discuss self-n-doped PDI performance in a range of applications. In particular, the impact of amine/ammonium incorporation into the PDI scaffold on doping efficiency is reviewed with regard to attachment mode, tether distance, counterion selection, and steric encumbrance. Self-n-doped PDIs are a unique set of PDI structural derivatives whose properties are amenable to a broad range of applications such as biochemistry, solar energy conversion, thermoelectric modules, batteries, and photocatalysis. Finally, we discuss challenges and the future outlook of self-n-doping principles.

C- and S-Shaped Perylene Diimide Heterohelicenes: Modular Synthesis and Spiral-Stair-Like π-Stacking

A number of C- and S-shaped perylene diimide (PDI) heterohelicenes with high dipole moments were synthesized from simple perylene tetrabutylester (PTE). Taking advantage of the weak coordination ability of the sterically crowded peri ester groups in PTE, efficient Rh(III)-catalyzed 2,8- and 2,11-bisiodinations of the perylene core were realized. The 2,8- and 2,11-diiodinated PTEs and PDIs represent key synthons for further ortho-π-extensions. In contrast to most helical π-skeletons that feature loose molecular packings, enantiomerically pure C-shaped PDI azahelicenes adopt unique spiral-stair-like π-stacking superstructures.

Design and Control of Perylene Supramolecular Polymers through Imide Substitutions

The number and type of new supramolecular polymer (SMP) systems have increased rapidly in recent years. Some of the key challenges faced for these novel systems include gaining full control over the mode of self-assembly, the creation of novel architectures and exploring functionality. Here, we provide a critical overview of approaches related to perylene-based SMPs and discuss progress to exert control over these potentially important SMPs through chemical modification of the imide substituents. Imide substitutions affect self-assembly behaviour orthogonally to the intrinsic optoelectronic properties of the perylene core, making for a valuable approach to tune SMP properties. Several recent approaches are therefore highlighted, with a focus on controlling 1) morphology, 2) H- or J- aggregation, and 3) mechanism of growth and degree of aggregation using thermodynamic and kinetic control. Areas of potential future exploration and application of these functional SMPs are also explored.

A New Strategy Using a Fluorescent Probe Combined with Polydopamine for Detecting the Activity of Acetylcholinesterase

A water-soluble and sensitive fluorescent probe N,N′-bis[tris-(2-aminoethyl)amine]-3,4,9,10-perylenetetracarboxylic diimide (PTRIS) was synthesized and, in combination with polydopamine (PDA), utilised in the detection of acetylcholinesterase (AChE) activity. PDA is spontaneously polymerized from dopamine (DA) in aerobic and alkaline solutions. The excellent absorption of PDA results in the aggregation of PTRIS around PDA as well as π–π stacking between them, which consequently quenched the fluorescence of PTRIS due to aggregation induced quenching (AIQ) in 9min. The hydrolysis product of acetylthiocholine (ATCh) catalyzed by AChE, thiocholine (TCh), was proved to inhibit the polymerization of DA, therefore the free monomeric PTRIS retained its strong fluorescence intensity. The fluorescence was switched off and on depending on the activity of AChE. According to the change of fluorescence intensity at 550nm, the detection limit of AChE was quantified as 0.02mUmL−1. It was also proved that this probe possessed excellent selectivity for AChE. Tacrine and the organophosphate pesticide diazinon were further evaluated for inhibitor screening. The half-maximal inhibitory concentration value of tacrine and diazinon was calculated to be 1.4 and 1.6μM respectively, revealing potential applications for inhibition and pesticide detecting.

Aggregation-directed High Fidelity Sensing of Picric Acid by a Perylenediimide-based Luminogen

Widespread use of picric acid (PA) in chemical industries and deadly explosives poses dreadful impact on all living creatures as well as the natural environment and has raised global concerns that necessitate the development of fast and efficient sensing platforms. To address this issue, herein, we report a perylenediimide-peptide conjugate, PDI-1, for detection of PA in methanol. The probe displays typical aggregation caused quenching (ACQ) behaviour and exhibits a fluorescence "turn-off" sensory response towards PA which is unaffected by the presence of other interfering nitroaromatic compounds. The sensing mechanism involves PA induced aggregation of the probe into higher order tape like structures which leads to quenching of emission. The probe possesses a low detection limit of 5.6 nM or 1.28 ppb and a significantly high Stern-Volmer constant of 6.87×10⁴  M^-1 . It also exhibits conducting properties in the presence of PA vapours and thus represents a prospective candidate for vapour phase detection of PA. This is, to the best of our knowledge, the first example of a perylenediimide based probe that demonstrates extremely specific, selective and sensitive detection of PA and thus grasps the potential for application in practical scenarios.

Radical anion formation exhibiting "turn-on" fluorescence sensing of hydrazine using a naphthalene diimide (NDI) derivative with a donor-acceptor-donor (D-A-D) molecular structure

In this paper, the synthesis of a naphthalene diimide (NDI) derivative with a donor-acceptor-donor (D-A-D) molecular structure substituted with a long alkyl chain (12 carbons) containing naphthalene hydrazide at the imide position is reported. The reduced emission quantum yield (φf = 0.01-0.03) of the NDI derivative in various solvents indicates the perturbation of the electronic state of π-electron deficient NDI (A) by the peripheral naphthalene (D) units. The investigation of the influence of the alkyl chain and naphthalene substituent on the self-assembling properties of the NDI derivative reveals an isodesmic mode of self-assembly in a chloroform/methylcyclohexane (CHCl3/MCH, 1 : 9, v/v) mixture. The self-assembling nature of the NDI derivative also results in the formation of an organogel in the CHCl3/MCH (1 : 9, v/v) mixture, and gel formation is well-comprehended by techniques such as P-XRD, rheological studies, and FT-IR measurements. Furthermore, radical anion (NDI˙-) formation of π-acidic NDI was used as a sensing tool for hydrazine by a fluorescence "turn-on" (φf = 0.12) method in the solution (DMSO), film, and gel state with a detection limit of 284.1 ppb in DMSO and 32 ppb in the gel state.

Dual-Mode Fluorescence and Magnetic Resonance Imaging by Perylene Diimide-Based Gd-Containing Magnetic Ionic Liquids

Bioimaging plays a key role in the diagnosis/treatment of diseases and in scientific research studies. Compared with single imaging techniques, dual-mode and multimode imaging techniques facilitate high accuracy. In this work, a perylene diimide (PDI)-based Gd-containing magnetic ionic liquid, Per-6-Diimi[Gd(NO₃)₄], is reported for dual-modal imaging, in which a Gd(III) complex was used for magnetic resonance imaging (MRI), while PDI was used for fluorescence imaging. Because of the difference in the biological microenvironment, there is a switch between dispersed and aggregated states of Per-6-Diimi[Gd(NO₃)₄] molecules in hydrophobic and hydrophilic media. When it was in the aqueous solution, the intensive π-π interaction of PDI cores made Per-6-Diimi[Gd(NO₃)₄] aggregates to form particles. The paramagnetic nanoparticles ensure prolonging the rotational correlation time, which results in a strong enhancement of MRI with a longitude relaxation coefficient of 14.94 mM^-1 s^-1. In an in vivo MRI experiment, the tumor site is imaged by MRI through the enhanced permeability and retention effect. However, when the molecule is present on the hydrophobic membrane of the cells, the dispersed Per-6-Diimi[Gd(NO₃)₄] showed good fluorescence imaging capabilities due to the high fluorescence quantum yield of PDI. Thus, the fluorescence imaging of cells can be carried out. Moreover, ex vivo fluorescence imaging of organs is performed after MRI. Per-6-Diimi[Gd(NO₃)₄] is enriched in the liver, kidneys, and tumors.

Sensitive and reversible perylene derivative-based fluorescent probe for acetylcholinesterase activity monitoring and its inhibitor

A reversible fluorescence probe for acetylcholinesterase activity detection was developed based on water soluble perylene derivative, N,N'-di(2-aspartic acid)-perylene-3,4,9,10-tetracarboxylic diimide (PASP). Based on the photo-induced electron transfer (PET), PASP fluorescence in aqueous is quenched after combining with copper ions (Cu²⁺). Acetylcholinesterase (AChE) is well known to catalyze the hydrolysis of acetylcholine (ATCh) to produce thiocholine, whose affinity is strong enough to capture Cu²⁺ by thiol (-SH) group from the complex PASP-Cu, resulting in the fluorescence signal of PASP recovers up to 90%. This optical switch is highly sensitive depended on the coordination and dissociation between PASP and Cu²⁺. We proposed its application for AChE activity detection, as well as its inhibitor screening. According to the change of fluorescence intensity, quantifying the detection limit of AChE was 1.78 mU·mL^-1. Classical inhibitors, tacrine and organophosphate pesticide diazinon, were further evaluated for drug screening. The IC₅₀ value of tacrine was calculated to be 0.43 μM, and the detection limit of diazinon was 0.22 μM. Both of these performances were much better than previous results, revealing our probe is sensitive and reversible for screening applications.

Chiroptical Properties in Thin Films of π-Conjugated Systems

Chiral π-conjugated molecules provide new materials with outstanding features for current and perspective applications, especially in the field of optoelectronic devices. In thin films, processes such as charge conduction, light absorption, and emission are governed not only by the structure of the individual molecules but also by their supramolecular structures and intermolecular interactions to a large extent. Electronic circular dichroism, ECD, and its emission counterpart, circularly polarized luminescence, CPL, provide tools for studying aggregated states and the key properties to be sought for designing innovative devices. In this review, we shall present a comprehensive coverage of chiroptical properties measured on thin films of organic π-conjugated molecules. In the first part, we shall discuss some general concepts of ECD, CPL, and other chiroptical spectroscopies, with a focus on their applications to thin film samples. In the following, we will overview the existing literature on chiral π-conjugated systems whose thin films have been characterized by ECD and/or CPL, as well other chiroptical spectroscopies. Special emphasis will be put on systems with large dissymmetry factors (g_abs and g_lum) and on the application of ECD and CPL to derive structural information on aggregated states.

Design of an Amphiphilic Perylene Diimide for Optical Recognition of Anticancer Drug through a Chirality-Induced Helical Structure

Introduction of chirality into a supramolecular self-assembly system plays an indispensable role in attaining specific molecular recognition ability. Herein, a chiral anticancer drug 5'-deoxy-5-fluorouridine (5'DFU) was explored for inducing the self-assembly of a cationic perylene diimide derivative containing boronic acid groups (PDI-PBA) into a highly ordered right-handed helical structure. As a result, PDI-PBA exhibited a molecular recognition ability towards 5'DFU among other cis-diols and anticancer drugs. With the help of a dynamic covalent bond and favorable hydrogen-bonding interactions, chirality transfer from chiral 5'DFU to achiral PDI-PBA breaks down the strong π-π stacking of PDI-PBA and makes it reorganize into highly ordered helical supramolecular structures. This work provides an insight into chiral anticancer drug tuning interactions of π-chromophores and the inducement of hierarchical self-assembly to achieve specific molecular recognition.

Tunable Self-Assembled Nanostructures of Electroactive PEGylated Tetra(Aniline) Based ABA Triblock Structures in Aqueous Medium

PEGylated tetra(aniline) ABA triblock structure PEG-TANI-PEG (2) consisting of tetra(aniline) (TANI) and polyethylene glycol (PEG) was synthesized by coupling the tosylated-PEG to boc-protected NH2/NH2 TANI (1) through a simple nucleophilic substitution reaction. Deprotection of 2 resulted in a leucoemeraldine base state of TANI (2-LEB), which was oxidized to stable emeraldine base (2-EB) state. 2-EB was doped with 1 M HCl to emeraldine salt (2-ES) state. FTIR, 1H and 13C NMR and UV-Vis-NIR spectroscopy, and MS (ESI) was used for structural characterization. The synthesized triblock structure exhibited good electroactivity as confirmed by CV and UV-Vis-NIR spectroscopy. Self-assembling of the triblock structure in aqueous medium was assessed by DLS, TEM, and SEM. Spherical aggregates were observed with variable sizes depicting the effect of concentration and oxidation of 2-LEB. Further, the aggregates showed acid/base sensitivity as evaluated by doping and dedoping of 2-EB with 1 M HCl and 1 M NH4OH, respectively. Future applications in drug delivery and sensors are envisaged for such tunable self-assembled nanostructures in aqueous media.

Solvent-Induced Supramolecular Assembly of a Peptide-Tetrathiophene-Peptide Conjugate

The assembly of a peptide-tetrathiophene-peptide (PTP) conjugate has been investigated in mixed solvents, which has different polarities by changing the solvent proportions. It was found that PTP can form fibers in THF/hexane solutions with 40–80%v of hexane. The fibers were stable and did not change on time. On the other hand, PTP formed ordered structures in a mixed solution with the water content from 40 to 60%v. For the as-prepared solutions, two nanostructures vesicles and parallelogram sheets were obtained. The parallelogram sheets could transform into vesicles on time. The fibers showed supramolecular chirality, however, there was no Cotton effect for vesicles and parallelogram sheets. UV-vis, FL, XRD, FT-IR, and CD spectra together with SEM, AFM, TEM were used to characterize the nanostructures and properties of the assemblies. Molecular packing mechanism was proposed based on the experimental data.

Chalcogen-substitution modulated supramolecular chirality and gas sensing properties in perylenediimides

The supramolecular helicity and gas response of perylene dyes can be well modulated by chalcogen atoms in the perylene core.

Ionic-surfactants-based thermotropic liquid crystals

Ionic surfactants can be combined with various functional groups through electrostatic interaction, resulting in a series of thermotropic liquid crystals (TLCs).

Self-assembly of multi-stranded perylene dye J-aggregates in columnar liquid-crystalline phases

Many discoid dyes self-assemble into columnar liquid-crystalline (LC) phases with packing arrangements that are undesired for photonic applications due to H-type exciton coupling. Here, we report a series of crystalline and LC perylene bisimides (PBIs) self-assembling into single or multi-stranded (two, three, and four strands) aggregates with predominant J-type exciton coupling. These differences in the supramolecular packing and optical properties are achieved by molecular design variations of tetra-bay phenoxy-dendronized PBIs with two N–H groups at the imide positions. The self-assembly is driven by hydrogen bonding, slipped π–π stacking, nanosegregation, and steric requirements of the peripheral building blocks. We could determine the impact of the packing motifs on the spectroscopic properties and demonstrate different J- and H-type coupling contributions between the chromophores. Our findings on structure–property relationships and strong J-couplings in bulk LC materials open a new avenue in the molecular engineering of PBI J-aggregates with prospective applications in photonics.

Perylene bisimides (PBI) exhibit interesting photophysical and self-assembly properties but detailed understanding of the correlation between packing motif and spectroscopic properties is lacking. Here the authors report on self-assembling of PBIs in liquid crystalline phases to give aggregates with J- and H-type coupling contribution between the chromophores.

Pyrimidine-containing β-iminoenolate difluoroboron complexes acting as non-traditional π-gelators and mechanofluorochromic dyes

A xerogel-based film based on a mechanofluorochromic dye of a β-iminoenolate difluoroboron complex could detect TFA vapor with high performance.

Influence of imide-substituents on the H-type aggregates of perylene diimides bearing cetyloxy side-chains at bay positions

A series of perylene-3,4:9,10-tetracarboxylic acid diimides (PDIs, namely TYR-PDI, AEP-PDI, CET-PDI, ANP-PDI and KOD-PDI), comprising long linear cetyloxy side-chains functionalized at the 1,7-bay positions and the different substituents (i.e., hydrophobic/hydrophilic segments) symmetrically linked at the two imide-positions of the perylene core were synthesized to investigate the influence of imide-substituent patterns on the aggregation behaviours of PDIs. The photophysical properties of these PDIs were studied by UV-Vis absorption, fluorescence and time-resolved photoluminescence spectroscopy. The differences in the photophysical properties of the PDIs indicate (i) blue-shifted and broadening absorption properties in both solution and thin-films, (ii) red-shifted and broadening fluorescence behavior at their emission maximum in solution, however, blue-shifted fluorescence behavior in thin-films, and (iii) obviously longer fluorescence life-times corresponding to the existence of rotationally displaced H-type aggregates. The formation of short-range ordered rod-like microstructures through face-to-face alignment of columnar rectangular H-type PDI aggregates was rationalized by scanning electron microscopy. The X-ray diffraction study revealed that the formation of well-defined columnar rectangular (Col_rp) H-type PDI aggregates indicated a nearly constant intracolumnar stacking distance of ∼3.9 Å for all PDIs. All of these findings were consistent with the formation of hydrophobic/hydrophilic interactions between the imide-substituents in addition to the strong hydrophobic π-π stacking interactions between the conjugated perylene cores, which were enforced in the H-type PDI aggregates that spontaneously self-organized into Col_rp structures.

Amino acid/crown ether hybrid materials: how charge affects liquid crystalline self-assembly

To probe the influence of electrostatic interactions on the mesomorphic self-assembly and phase behaviour of hybrid liquid crystals a series of crown ether/tyrosine hybrid systems was prepared by Steglich esterification of alkyl N-(tert-butoxycarbonyl)-l-tyrosinates with 4-carboxybenzo[15]crown-5 and 4-carboxybenzo[18]crown-6. The obtained derivatives allowed further manipulations at the NH functional group and complexation of the crown ether unit with NaI to give neutral or charged hybrid materials. All compounds were investigated by differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and X-ray diffraction (XRD) measurements. Neither the variation of the N-protecting group, introduction of charge at the N-terminus nor anion exchange (Cl vs. I) resulted in mesomorphism. In contrast, N-Boc-protected and unprotected hybrids formed rectangular columnar (Col_r) mesophases with phase widths up to 35 K. NaI complexation switched these neutral thermotropic derivatives into ionic liquid crystals (ILCs) and induced a change of mesophase type from Col_r to smectic A (SmA). A comparison of experimentally obtained layer distances and theoretically calculated molecular lengths indicated bilayer SmA formation with interdigitated alkyl chains. Packing models for both mesophase types are proposed and discussed with respect to stabilizing interactions.

Formation of non-spherical polymersomes driven by hydrophobic directional aromatic perylene interactions

Polymersomes, made up of amphiphilic block copolymers, are emerging as a powerful tool in drug delivery and synthetic biology due to their high stability, chemical versatility, and surface modifiability. The full potential of polymersomes, however, has been hindered by a lack of versatile methods for shape control. Here we show that a range of non-spherical polymersome morphologies with anisotropic membranes can be obtained by exploiting hydrophobic directional aromatic interactions between perylene polymer units within the membrane structure. By controlling the extent of solvation/desolvation of the aromatic side chains through changes in solvent quality, we demonstrate facile access to polymersomes that are either ellipsoidal or tubular-shaped. Our results indicate that perylene aromatic interactions have a great potential in the design of non-spherical polymersomes and other structurally complex self-assembled polymer structures.

Supramolecular Host-Guest System as Ratiometric Fe3+ Ion Sensor Based on Water-Soluble Pillar[5]arene

Developing a specific, ratiometric, and reversible detection method for metal ions is significant to guard against the threat of metal-caused environmental pollution and organisms poisoning. Here a supramolecular host-guest system (WP5⊃G) based on water-soluble pillar[5]arene (WP5) and water-soluble quaternized perylene diimide derivative (G) was constructed. Morphological transformation was achieved during the process of adding WP5 into G aqueous solution, and a fluorescence "turn-off" phenomenon was observed which was caused by supramolecular photoinduced electron transfer (PET). Meanwhile, hydrophobic effect and electrostatic interaction played important roles in this supramolecular process, which was confirmed by isothermal titration calorimeter (ITC) and ζ potential experiments. Furthermore, the supramolecular host-guest system could be a "turn-on" fluorescent probe for Fe³⁺ ion detection through the process of interdicting supramolecular PET. Moreover, the Fe³⁺ ion detection showed specific, ratiometric, and reversible performances with a detection limit of 2.13 × 10^-7 M, which might have great potentials in biological and environmental monitoring.

Morphogenesis and Optoelectronic Properties of Supramolecular Assemblies of Chiral Perylene Diimides in a Binary Solvent System

Chiral supramolecular structures are attracting great attention due to their specific properties and high potential in chiral sensing and separation. Herein, supramolecular assembling behaviors of chiral perylene diimides have been systematically investigated in a mixed solution of tetrahydrofuran and water. They exhibit remarkably different morphologies and chiral aggregation behaviors depending on the mixing ratio of the solvents, i.e., the fraction of water. The morphogenesis and optoelectronic properties of chiral supramolecular structures have been thoroughly studied using a range of experimental and theoretical methods to investigate the morphological effects of chiral supramolecular assemblies on the electrical performances and photogenerated charge-carrier behaviors. In addition, chiral perylene diimides have been discriminated by combining vibrational circular dichroism with theoretical calculations, for the first time. The chiral supramolecular nanostructures developed herein strongly absorb visible spectral region and exhibit high photoresponsivity and detectivity, opening up new opportunities for practical applications in optoelectronics.

Non-equilibrium steady states in supramolecular polymerization

Living systems use fuel-driven supramolecular polymers such as actin to control important cell functions. Fuel molecules like ATP are used to control when and where such polymers should assemble and disassemble. The cell supplies fresh ATP to the cytosol and removes waste products to sustain steady states. Artificial fuel-driven polymers have been developed recently, but keeping them in sustained non-equilibrium steady states (NESS) has proven challenging. Here we show a supramolecular polymer that can be kept in NESS, inside a membrane reactor where ATP is added and waste removed continuously. Assembly and disassembly of our polymer is regulated by phosphorylation and dephosphorylation, respectively. Waste products lead to inhibition, causing the reaction cycle to stop. Inside the membrane reactor, however, waste can be removed leading to long-lived NESS conditions. We anticipate that our approach to obtain NESS can be applied to other stimuli-responsive materials to achieve more life-like behaviour.

Several cell functions are based on the fuel-driven assembly and disassembly of supramolecular polymers under non-equilibrium conditions. Here, the authors show controlled formation and breaking of a supramolecular polymer by enzymatic phosphorylation and dephosphorylation of a building block by continuously adding ATP fuel and removing waste products.

Substitution Effects on the Photoinduced Charge-Transfer Properties of Novel Perylene-3,4,9,10-tetracarboxylic Acid Derivatives

We report here the synthesis and photophysical study of a series of electron donor-acceptor molecules, in which electron-donating 4-methoxyphenoxy groups are attached to the 1,7-bay positions of four different perylene tetracarboxylic acid derivatives, namely, perylene tetraesters 1, perylene monoimide diesters 2, perylene bisimides 3, and perylene monobenzimidazole monoimides 4. These perylene derivatives are used because of their increasing order of electron-accepting capability upon moving from 1 to 4. Two additional donor-acceptor molecules are synthesized by linking electron-donating 4-methoxyphenyl groups to the imide position of perylene monoimide diester 2 and perylene bisimide 3. The motivation for this study is to achieve a good control over the photoinduced charge-transfer (CT) process in perylene-based systems by altering the position of electron donors and tuning the electron deficiency of perylene core. A comprehensive study of the photophysical properties of these molecules has shown a highly systematic trend in the magnitude of CT as a function of increased electron deficiency of the perylene core and solvent polarity. Importantly, just by changing the attachment of electron-donating group from "bay" to "imide" position, we are able to block the CT process. This implies that the positioning of the electron donor at the perylene core strongly influences the kinetics of the photoinduced CT process. In these compounds, the CT process is characterized by the quenching of fluorescence and singlet excited-state lifetimes as compared to model compounds bearing non-electron-donating 4-tert-butylphenoxy groups. Transient absorption spectroscopy did not reveal spectra of CT states. This most likely implies that the CT state is not accumulated, because of the faster charge recombination.

Chiral Perylene Materials by Ionic Self-Assembly

Two chiral complexes (1-SDS and 1-SDBS) were prepared via the ionic self-assembly of a chiral perylene diimide tecton with oppositely charged surfactants. The effect of surfactant tail architecture on the self-assembly properties and supramolecular structure was investigated in detail using UV-vis, IR, circular dichroism, light microscopy, X-ray diffraction studies, and electron microscopy. The results obtained revealed the molecular chirality of the parent perylene tecton could be translated into supramolecular helical chirality of the resulting complexes via primary ionic interactions through careful choice of solvent and concentration. Differing solvent-dependent aggregation behavior was observed for these complexes as a result of the different possible noncovalent interactions via the surfactant alkyl tails. The results presented in this study demonstrate that ionic self-assembly (ISA) is a facile strategy for the production of chiral supramolecular materials based on perylene diimides. The structure-function relationship is easily explored here due to the wide selection and easy availability of common surfactants.

Self-Assembly of a Functional Oligo(Aniline)-Based Amphiphile into Helical Conductive Nanowires

A tetra(aniline)-based cationic amphiphile, TANI-NHC(O)C5H10N(CH3)3(+)Br(-) (TANI-PTAB) was synthesized, and its emeraldine base (EB) state was found to self-assemble into nanowires in aqueous solution. The observed self-assembly is described by an isodesmic model, as shown by temperature-dependent UV-vis investigations. Linear dichroism (LD) studies, combined with computational modeling using time-dependent density functional theory (TD-DFT), suggests that TANI-PTAB molecules are ordered in an antiparallel arrangement within nanowires, with the long axis of TANI-PTAB arranged perpendicular to the nanowire long axis. Addition of either S- or R- camphorsulfonic acid (CSA) to TANI-PTAB converted TANI to the emeraldine salt (ES), which retained the ability to form nanowires. Acid doping of TANI-PTAB had a profound effect on the nanowire morphology, as the CSA counterions' chirality translated into helical twisting of the nanowires, as observed by circular dichroism (CD). Finally, the electrical conductivity of CSA-doped helical nanowire thin films processed from aqueous solution was 2.7 mS cm(-1). The conductivity, control over self-assembled 1D structure and water-solubility demonstrate these materials' promise as processable and addressable functional materials for molecular electronics, redox-controlled materials and sensing.