Monometallic Ni(0) and Heterobimetallic Ni(0) /Au(I) Complexes of Tripodal Phosphine Ligands: Characterization in Solution and in the Solid State and Catalysis

Di(hydroperoxy)adamantane adducts: synthesis, characterization and application as oxidizers for the direct esterification of aldehydes

The di(hydroperoxy)adamantane adducts of water (1) and phosphine oxides p-Tol₃PO·(HOO)₂C(C₉H₁₄) (2), o-Tol₃PO·(HOO)₂C(C₉H₁₄) (3), and Cy₃PO·(HOO)₂C(C₉H₁₄) (4), as well as a CH₂Cl₂ adduct of a phosphole oxide dimer (8), have been created and investigated by multinuclear NMR spectroscopy, and by Raman and IR spectroscopy. The single crystal X-ray structures for 1-4 and 8 are reported. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the di(hydroperoxy)adamantane adducts. The Raman ν(O-O) stretching bands of 1-4 prove that the peroxo groups are present in the solids. Selected di(hydroperoxy)alkane adducts, in combination with AlCl₃ as catalyst, have been applied for the direct oxidative esterification of n-nonyl aldehyde, benzaldehyde, p-methylbenzaldehyde, p-bromobenzaldehyde, and o-hydroxybenzaldehyde to the corresponding methyl esters. The esterification takes place in an inert atmosphere, under anhydrous and oxygen-free conditions, within a time frame of 45 minutes to 5 hours at room temperature. Hereby, two oxygen atoms per adduct assembly are active with respect to the quantitative transformation of the aldehyde into the ester.

Actual Symmetry of Symmetric Molecular Adducts in the Gas Phase, Solution and in the Solid State

This review discusses molecular adducts, whose composition allows a symmetric structure. Such adducts are popular model systems, as they are useful for analyzing the effect of structure on the property selected for study since they allow one to reduce the number of parameters. The main objectives of this discussion are to evaluate the influence of the surroundings on the symmetry of these adducts, steric hindrances within the adducts, competition between different noncovalent interactions responsible for stabilizing the adducts, and experimental methods that can be used to study the symmetry at different time scales. This review considers the following central binding units: hydrogen (proton), halogen (anion), metal (cation), water (hydrogen peroxide).

1,3,5-Triaza-7-Phosphaadamantane (PTA) as a 31P NMR Probe for Organometallic Transition Metal Complexes in Solution

Due to the rigid structure of 1,3,5-triaza-7-phosphaadamantane (PTA), its ³¹P chemical shift solely depends on non-covalent interactions in which the molecule is involved. The maximum range of change caused by the most common of these, hydrogen bonding, is only 6 ppm, because the active site is one of the PTA nitrogen atoms. In contrast, when the PTA phosphorus atom is coordinated to a metal, the range of change exceeds 100 ppm. This feature can be used to support or reject specific structural models of organometallic transition metal complexes in solution by comparing the experimental and Density Functional Theory (DFT) calculated values of this ³¹P chemical shift. This approach has been tested on a variety of the metals of groups 8-12 and molecular structures. General recommendations for appropriate basis sets are reported.

Investigation of Structural Changes of Cu(I) and Ag(I) Complexes Utilizing a Flexible, Yet Sterically Demanding Multidentate Phosphine Oxide Ligand

The syntheses of a sterically demanding, multidentate bis(quinaldinyl)phenylphosphine oxide ligand and some Cu(I) and Ag(I) complexes thereof are described. By introducing a methylene group between the quinoline unit and phosphorus, the phosphine oxide ligand gains additional flexibility. This specific ligand design induces not only a versatile coordination chemistry but also a rarely observed and investigated behavior in solution. The flexibility of the birdlike ligand offers the unexpected opportunity of open-wing and closed-wing coordination to the metal. In fact, the determined crystal structures of these complexes show both orientations. Investigations of the ligand in solution show a strong dependency of the chemical shift of the CH₂ protons on the solvent used. Variable-temperature, multinuclear NMR spectroscopy was carried out, and an interesting dynamic behavior of the complexes is observed. Due to the introduced flexibility, the quinaldinyl substituents change their arrangements from open-wing to closed-wing upon cooling, while still staying coordinated to the metal. This change in conformation is completely reversible when warming up the sample. Based on 2D NMR spectra measured at -80 °C, an assignment of the signals corresponding to the different arrangements was possible. Additionally, the copper(I) complex shows reversible redox activity in solution. The combination of structural flexibility of a multidentate ligand and the positive redox properties of the resulting complexes comprises key factors for a possible application of such compounds in transition-metal catalysis. Via a reorganization of the ligand, occurring transition states could be stabilized, and selectivity might be enhanced.

Carbodicarbene: geminal-Bimetallic Coordination in Selective Manner

The reaction of Pd(OAc)₂ with free carbodicarbene (CDC) generates a Pd acetate trinuclear complex 1 via intramolecular C(sp³ )-H bond activation at one of the CDC methyl side arms. The solid structure of 1 reveals the capability of CDC to facilitate a double dative bond with two palladium centers in geminal fashion. This is attributed to the chelating mode of CDC, which can frustrate π-conjugation within the CDC framework. Such effect maybe also amplified by ligand-ligand interaction. The formation of other gem-bimetallic Pd-Pd, Pd-Au, and Ni-Au provides further structural evidence for this proof-of-concept in selective installation. Structural analysis is supported by computational calculations based on state-of-the-art energy decomposition analysis (EDA) in conjunction with natural orbitals for chemical valence (NOCV) method.

Di(hydroperoxy)cycloalkane Adducts of Triarylphosphine Oxides: A Comprehensive Study Including Solid-State Structures and Association in Solution

Four new di(hydroperoxy)cycloalkane adducts (Ahn adducts) of p-Tol₃PO (1) and o-Tol₃PO (2), namely, p-Tol₃PO·(HOO)₂C(CH₂)₅ (3), o-Tol₃PO·(HOO)₂C(CH₂)₅ (4), p-Tol₃PO·(HOO)₂C(CH₂)₆ (5), and o-Tol₃PO·(HOO)₂C(CH₂)₆ (6), have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The ³¹P NMR data are in accordance with hydrogen bonding of the di(hydroperoxy)alkanes to the P═O groups of the phosphine oxides. Due to their high solubility in organic solvents, natural abundance ¹⁷O NMR spectra of 1-6 could be recorded, providing the signals for the P═O groups and additionally the two different oxygen nuclei in the O-OH groups in the adducts 3-6. The association and mobility of 3-6 were explored by ¹H DOSY (diffusion ordered spectroscopy) NMR, which indicated persistent hydrogen bonding of the adducts in solution. Competition experiments with phosphine oxides allowed ranking of the affinities of the di(hydroperoxy)cycloalkanes for the different phosphine oxide carriers. On the basis of variable temperature ³¹P NMR investigations, the Gibbs energies of activation ΔG^‡ for the adduct dissociation processes of 3-6 at different temperatures, as well as the enthalpy ΔH^‡ and entropy ΔS^‡ of activation, have been determined. IR spectroscopy of 3-6 corroborated the hydrogen bonding, and in the Raman spectra, the ν(O-O) stretching bands have been identified, confirming the presence of peroxy groups in the solid materials. The high solubilities in selected organic solvents have been quantified.

Disentangling different modes of mobility for triphenylphosphine oxide adsorbed on alumina

Triphenylphosphine oxide (TPPO, 1) has been adsorbed on neutral alumina by dry grinding of the components in the absence of a solvent. The adsorption proves translational mobility of 1 on the surface of alumina. Different surface coverages from a densely packed monolayer (99% coverage) to a dilute sub-monolayer (25%) have been produced. The samples have been studied by diverse multinuclear ¹H, ¹³C, and ³¹P variable temperature solid-state nuclear magnetic resonance (NMR) techniques. The interactions of 1 with the surface are determined by hydrogen bonding of the P=O group to OH groups on the surface. The ³¹P solid-state NMR spectra prove that even at low temperatures, the molecules of 1 are highly mobile on the surface. Using T₁ and T₂ relaxation time analyses of the ³¹P resonance in the solid state at variable temperatures allowed the identification and quantification of two different modes of mobility. Besides the translational mobility that consists of jumps from one hydrogen-bonding OH site on the surface to an adjacent one, a rotational movement around the axis defined by the P=O group of 1 occurs.

Hydrogen peroxide adducts of triarylphosphine oxides

Five new hydrogen peroxide adducts of phosphine oxides (p-Tol₃PO·H₂O₂)₂ (1), (o-Tol₃PO·H₂O₂)₂ (2), (o-Tol₂PhPO·H₂O₂)₂ (3), (p-Tol₃PO)₂·H₂O₂ (4), and (o-TolPh₂PO)₂·H₂O₂ (5), and the water adduct (o-Tol₂PhPO·H₂O)₂ (6) have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the hydrogen peroxide. The mono- versus dimeric nature of the adduct assemblies has been investigated by DOSY NMR experiments. Raman spectroscopy of the symmetric adducts and the ν(O-O) stretching bands confirm the presence of hydrogen-bonded hydrogen peroxide in the solid materials. The solubilities in organic solvents have been quantified. Due to the high solubilities of 1-6 in organic solvents their ¹⁷O NMR spectra could be recorded in natural abundance, providing well-resolved signals for the P[double bond, length as m-dash]O and O-O groups. The adducts 1-5 have been probed regarding their stability in solution at 105 °C. The decomposition of the adduct 1 takes place by loss of the active oxygen atoms in two steps.

Structures and Dynamics of Secondary and Tertiary Alkylphosphine Oxides Adsorbed on Silica

The three secondary phosphine oxides [CH₂ =CH(CH₂ )₄ ]₂ HPO (1), [CH₂ =CH(CH₂ )₅ ]₂ HPO (2), and [CH₂ =CH(CH₂ )₆ ]₂ HPO (3), and two diphosphine dioxides, {[CH₂ =CH(CH₂ )₆ ]₂ PO(CH₂ )₇ }₂ (4) and {[CH₂ =CH(CH₂ )₆ ]₂ PO(CH₂ )₄ }₂ (5), incorporating long methylene chains, are described. The single crystal X-ray structures of 1, 2, and 5 have been determined. The phosphine oxides 3, 4, and 5 have been adsorbed on silica in submonolayer quantities to give 3 a-5 a. The ¹ H, ¹³ C, and ³¹ P solid-state NMR spectra of polycrystalline 3-5 have been analyzed and compared with those of 3 a-5 a. The changes of the solid-state NMR characteristics upon adsorption and the surface mobilities of the phosphine oxides are discussed.

Selective synthesis and stabilization of peroxides via phosphine oxides

MEKPO (methyl ethyl ketone peroxide) and other peroxides can be synthesized selectively and stabilized as hydrogen-bonded phosphine oxide adducts.

Spontaneous Si–C bond cleavage in (TriphosSi)-nickel complexes

A series of Triphos^C/Si-derived nickel(ii) complexes revealed high structural flexibility and unexpected reactivities.