Walking Down the Chalcogenic Group of the Periodic Table: From Singlet to Triplet Organic Emitters

Tweaking the Optoelectronic Properties of S-Doped Polycyclic Aromatic Hydrocarbons by Chemical Oxidation

Peri-thiaxanthenothiaxanthene, an S-doped analog of peri-xanthenoxanthene, is used as a polycyclic aromatic hydrocarbon (PAH) scaffold to tune the molecular semiconductor properties by editing the oxidation state of the S-atoms. Chemical oxidation of peri-thiaxanthenothiaxanthene with H₂ O₂ led to the relevant sulfoxide and sulfone congeners, whereas electrooxidation gave access to sulfonium-type derivatives forming crystalline mixed valence (MV) complexes. These complexes depicted peculiar molecular and solid-state arrangements with face-to-face π-π stacking organization. Photophysical studies showed a widening of the optical bandgap upon progressive oxidation of the S-atoms, with the bis-sulfone derivative displaying the largest value (E₀₀ =2.99 eV). While peri-thiaxanthenothiaxanthene showed reversible oxidation properties, the sulfoxide and sulfone derivatives mainly showed reductive events, corroborating their n-type properties. Electric measurements of single crystals of the MV complexes exhibited a semiconducting behavior with a remarkably high conductivity at room temperature (10^-1 -10^-2  S cm^-1 and 10^-2 -10^-3  S cm^-1 for the O and S derivatives, respectively), one of the highest reported so far. Finally, the electroluminescence properties of the complexes were tested in light-emitting electrochemical cells (LECs), obtaining the first S-doped mid-emitting PAH-based LECs.

Supramolecular Chalcogen‐Bonded Semiconducting Nanoribbons at Work in Lighting Devices

This work describes the design and synthesis of a π‐conjugated telluro[3,2‐β][1]‐tellurophene‐based synthon that, embodying pyridyl and haloaryl chalcogen‐bonding acceptors, self‐assembles into nanoribbons through chalcogen bonds. The ribbons π‐stack in a multi‐layered architecture both in single crystals and thin films. Theoretical studies of the electronic states of chalcogen‐bonded material showed the presence of a local charge density between Te and N atoms. OTFT‐based charge transport measurements showed hole‐transport properties for this material. Its integration as a p‐type semiconductor in multi‐layered Cu^I‐based light‐emitting electrochemical cells (LECs) led to a 10‐fold increase in stability (38 h vs. 3 h) compared to single‐layered devices. Finally, using the reference tellurotellurophene congener bearing a C−H group instead of the pyridyl N atom, a herringbone solid‐state assembly is formed without charge transport features, resulting in LECs with poor stabilities (<1 h).

Tunable Cysteine-Targeting Electrophilic Heteroaromatic Warheads Induce Ferroptosis

Once considered potential liabilities, the modern era witnesses a renaissance of interest in covalent inhibitors in drug discovery. The available toolbox of electrophilic warheads is limited by constraints on tuning reactivity and selectivity. Following our work on a class of ferroptotic agents termed CETZOLEs, we discovered new tunable heterocyclic electrophiles which are capable of inducing ferroptosis. The biological evaluation demonstrated that thiazoles with an alkyne electrophile at the 2-position selectively induce ferroptosis with high potency. Density functional theory calculations and NMR kinetic studies demonstrated the ability of our heterocycles to undergo thiol addition, an apparent prerequisite for cytotoxicity. Chemoproteomic analysis indicated several potential targets, the most prominent among them being GPX4 protein. These results were further validated by western blot analysis and the cellular thermal shift assay. Incorporation of these heterocycles into appropriate pharmacophores generated highly cytotoxic agents such as the analogue BCP-T.A, with low nM IC50 values in ferroptosis-sensitive cell lines.

[1,4]Ditellurino[2,3-b:5,6-b′]dipyrazine

The title compound, C₈H₄N₄Te₂, is the first reported [1,4]tellura[2,3-b:5,6-b′]di­pyrazine. Three independent unit-cell mol­ecules are folded along their Te⋯Te axes, with an average angle φ = 57.9°. C—Te—C angles range from 91.48 (6) to 93.80 (6)°. Inter­molecular N⋯Te bonding inter­actions between tellurium atoms of the central ring and the pyrazine N atoms of adjacent mol­ecules result in a supra­molecular helix motif.

[1,4]Ditellurino[2,3-b:5,6-b′]di­pyrazine represents the first reported [1,4]chalcogena[2,3-b:5,6-b′]di­pyrazine containing a heavy chalcogens The asymmetric unit consists of three mol­ecules. In contrast to its sulfur analog, which is planar [Lynch et al. (1994 ▸) Cryst. Struct. Commun.50,1470–1472], C₈H₄N₄Te₂ is folded along the Te⋯Te axis to accommodate the larger chalcogenide atoms. The dihedral angle between the two Te₂C₂ rings of the central ring is 57.9° (mean of three). C—Te bond lengths range from 2.1105 (16) Å to 2.1381 (17) Å, in good agreement with those predicted by their covalent radii. All Te atoms are involved in inter­molecular Te⋯N contacts, with distances in the range 2.894 (2) to 2.963 (2) Å. These result in a spiral supra­molecular assembly, forming helical columns.

Metal-Free Organic Phosphors toward Fast and Efficient Room-Temperature Phosphorescence

ConspectusMetal-free purely organic phosphors (POPs) are promising materials for display technologies, solid-state lighting, and sensors platforms because of their advantageous properties such as large design windows, easy processability, and economic material cost. Unlike inorganic semiconductors, creating the conditions for triplet excitons to produce light in organic materials is a demanding task because of the presence of electron spin configurations that undergo spin-forbidden transitions, which is usually facilitated by spin-orbit coupling (SOC). In the absence of heavy metals, however, the SOC efficiency in POPs remains low, and consequently, external nonradiative photophysical processes will also severely affect triplet excitons. Addressing these challenges requires the development of rational molecular design principles to accurately account for how all conceivable structural, electronic, chemical, compositional factors affect materials performance.This Account summarizes important molecular design and matrix engineering strategies to tackle the two key challenges for POPs─boosting SOC efficiencies and suppressing nonradiative decays. We start by reviewing the fundamental understanding of internal and external factors affecting the emission efficiencies of POPs, including the theory behind SOC and the origin of nonradiative decays. Subsequently, we discuss the design of contemporary POP systems on the basis of research insights from our group and others, where SOC is mostly promoted by heavy atom effects and the El-Sayed rule. On one hand, nonmetal heavy atoms including Br, I, or Se provide the heavy atom effects to boost SOC. On the other hand, the El-Sayed rule addresses the necessity of orbital angular momentum change in SOC and the general utilization of carbonyl, heterocyclic rings, and other moieties with rich nonbonding electrons. Because of the slow-decaying nature of triplet excitons, engineering the matrices of POPs is critical to effectively suppress collisional quenching as the major nonradiative decay route, thus achieving POPs with decent room temperature quantum efficiency. For that purpose, crystalline or rigid amorphous matrices have been implemented along with specific intermolecular forces between POPs and their environment.Despite the great efforts made in the past decade, the intrinsic SOC efficiencies of POPs remain low, and their emission lifetimes are pinned in the millisecond to second regime. While this is beneficial for POPs with ultralong emission, designing high-SOC POPs with simultaneous fast decay and high quantum efficiencies is particularly advantageous for display systems. Following the design of contemporary POPs, we will discuss molecular design descriptors that could potentially break the current limit to boost internal SOC in purely organic materials. Our recently developed concept of "heavy atom oriented orbital angular momentum manipulation" will be discussed, accompanied by a rich and expanded library of fast and efficient POP molecules, which serves as a stepping stone into the future of this field. We will conclude this Account by discussing the noteworthy application of POPs in organic light-emitting diodes (OLEDs), solid-state lighting, and sensors, as well as the remaining challenges in the design of fast and efficient POPs.

Expanding the Library of 2-Phenylbenzotellurazoles: Red-Shifting Effect­ of Ethoxy Functionalities on the UV/Vis Absorption Properties

This work describes the high-yield synthesis of a novel series of benzotellurazoles bearing a phenyl ring in 2-position, which is differently functionalized with ethoxy chains. Changing the number and the position of these functional groups determines differences in the self-assembly in the solid state, as well as in the photophysical properties of the targeted molecules. As anticipated by theoretical calculations of the HOMO-LUMO gap of each molecule, the presence of ethoxy chains in o- and p-positions determines up to 20 nm red-shifts in the absorption peaks, when compared to unsubstituted benzotellurazole. Similarly, more significant changes are observed in the chemical shifts of 125Te NMR spectra for those derivatives bearing o- and p-ethoxy functionalization.

Long-Lived Photoluminescence of Molecular Group 14 Compounds through Thermally Activated Delayed Fluorescence

Photoluminescent molecules exploiting the sizable spin-orbit coupling constants of main group metals and metalloids to access long-lived triplet excited states are relatively rare compared to phosphorescent transition metal complexes. Here we report the synthesis of three air- and moisture-stable group 14 compounds E(^MePDP^Ph)₂, where E = Si, Ge, or Sn and [^MePDP^Ph]^2- is the doubly deprotonated form of 2,6-bis(5-methyl-3-phenyl-1H-pyrrol-2-yl)pyridine. In solution, all three molecules exhibit exceptionally long-lived triplet excited states with lifetimes in the millisecond range and show highly efficient photoluminescence (Φ ≤ 0.49) due to competing prompt fluorescence and thermally activated delayed fluorescence at and around room temperature. Temperature-dependent steady-state emission spectra and photoluminescent lifetime measurements provided conclusive evidence for the two distinct emission pathways. Picosecond transient absorption spectroscopy allowed further analysis of the intersystem crossing (ISC) between singlet and triplet manifolds (τ_ISC = 0.25-3.1 ns) and confirmed the expected trend of increased ISC rates for the heavier elements in otherwise isostructural compounds.

Heavy atom oriented orbital angular momentum manipulation in metal-free organic phosphors

Metal-free purely organic phosphors (POPs) are emerging materials for display technologies, solid-state lighting, and chemical sensors. However, due to limitations in contemporary design strategies, the intrinsic spin-orbit coupling (SOC) efficiency of POPs remains low and their emission lifetime is pinned in the millisecond regime. Here, we present a design concept for POPs where the two main factors that control SOC-the heavy atom effect and orbital angular momentum-are tightly coupled to maximize SOC. This strategy is bolstered by novel natural-transition-orbital-based computational methods to visualize and quantify angular momentum descriptors for molecular design. To demonstrate the effectiveness of this strategy, prototype POPs were created having efficient room-temperature phosphorescence with lifetimes pushed below the millisecond regime, which were enabled by boosted SOC efficiencies beyond 102 cm-1 and achieved record-high efficiencies in POPs. Electronic structure analysis shows how discrete tuning of heavy atom effects and orbital angular momentum is possible within the proposed design strategy, leading to a strong degree of control over the resulting POP properties.

Cyclization Reactions Involving 2-Aminoarenetellurols and Derivatives of α,β-Unsaturated Carboxylic Acids

The reductive cyclization of arenetellurols carrying α,β-unsaturated amide functionalities in the ortho position was investigated. Conceptually, such compounds can form 1,3-tellurazoles without the involvement of the unsaturation in the ring closure, they can form 1,4-tellurazinone derivatives, or they can undergo ring closure to 1,5-tellurazepinones. Amides derived from acrylic and methacrylic acid generated 1,5-tellurazepinones while 2-cinnamylamidobenzenetellurol cyclized to a 1,3-tellurazole derivative. In contrast, the reaction of acetylenedicarboxylic acid and its derivatives with 2-aminoarenetellurols generated 1,4-tellurazepinones, including a derivative of novel tricyclic naphtho [1, 4]tellurazinone. A comparison with analogous reactions of sulfur congeners indicates that their chemistry is a good predictor for the products obtained from 2-aminoarenetellurols. Selected compounds were characterized by X-ray crystallography. The present work offers access to previously unexplored organotellurium heterocycles.

1,2,5-Thiadiazole 1,1-dioxides and Their Radical Anions: Structure, Properties, Reactivity, and Potential Use in the Construction of Functional Molecular Materials

This work provides a summary of the preparation, structure, reactivity, physicochemical properties, and main uses of 1,2,5-thiadiazole 1,1-dioxides in chemistry and material sciences. An overview of all currently known structures containing the 1,2,5-thiadiazole 1,1-dioxide motif (including the anions radical species) is provided according to the Cambridge Structural Database search. The analysis of the bond lengths typical for neutral and anion radical species is performed, providing a useful tool for unambiguous assessment of the valence state of the dioxothiadiazole-based compounds based solely on the structural data. Theoretical methodologies used in the literature to describe the dioxothiadiazoles are also shortly discussed, together with the typical 'fingerprint' of the dioxothiadiazole ring reported by means of various spectroscopic techniques (NMR, IR, UV-Vis). The second part describes the synthetic strategies leading to 1,2,5-thiadiazole 1,1-dioxides followed by the discussion of their electrochemistry and reactivity including mainly the chemical methods for the successful reduction of dioxothiadiazoles to their anion radical forms and the ability to form coordination compounds. Finally, the magnetic properties of dioxothiadiazole radical anions and the metal complexes involving dioxothiadiazoles as ligands are discussed, including simple alkali metal salts and d-block coordination compounds. The last section is a prospect of other uses of dioxothiadiazole-containing molecules reported in the literature followed by the perspectives and possible future research directions involving these compounds.

Substituent-Controlled Tailoring of Chalcogen-Bonded Supramolecular Nanoribbons in the Solid State

In this work, we design and synthesize supramolecular 2,5-substituted chalcogenazolo[5,4-β]pyridine (CGP) synthons arranging in supramolecular ribbons at the solid state. A careful choice of the combination of substituents at the 2- and 5-positions on the CGP scaffold is outlined to accomplish supramolecular materials by means of multiple hybrid interactions, comprising both chalcogen and hydrogen bonds. Depending on the steric and electronic properties of the substituents, different solid-state arrangements have been achieved. Among the different moieties on the 5-position, an oxazole unit has been incorporated on the Se- and Te-congeners by Pd-catalyzed cross-coupling reaction and a supramolecular ribbon-like organization was consistently obtained at the solid state.

Organic room-temperature phosphorescence from halogen-bonded organic frameworks: hidden electronic effects in rigidified chromophores

Development of purely organic materials displaying room-temperature phosphorescence (RTP) will expand the toolbox of inorganic phosphors for imaging, sensing or display applications. While molecular solids were found to suppress non-radiative energy dissipation and make the RTP process kinetically favourable, such an effect should be enhanced by the presence of multivalent directional non-covalent interactions. Here we report phosphorescence of a series of fast triplet-forming tetraethyl naphthalene-1,4,5,8-tetracarboxylates. Various numbers of bromo substituents were introduced to modulate intermolecular halogen-bonding interactions. Bright RTP with quantum yields up to 20% was observed when the molecule is surrounded by a Br⋯O halogen-bonded network. Spectroscopic and computational analyses revealed that judicious heavy-atom positioning suppresses non-radiative relaxation and enhances intersystem crossing at the same time. The latter effect was found to be facilitated by the orbital angular momentum change, in addition to the conventional heavy-atom effect. Our results suggest the potential of multivalent non-covalent interactions for excited-state conformation and electronic control.

The number and position of halogen substituents in purely organic π–π* chromophores critically affect the efficiency of phosphorescence.

Formation of bis-benzimidazole and bis-benzoxazole through organocatalytic depolymerization of poly(ethylene terephthalate) and its mechanism

One-pot syntheses of bis-benzimidazole and bis-benzoxazole from poly(ethylene terephthalate) waste bottles were successful through two-step nucleophilic attacks promoted by TBD.

Non-covalent bridging of bithiophenes through chalcogen bonding grips

In this work, chalcogen functionalized dithiophenes, equipped on both extremities with chalcogen-bonding recognition heterocycles, have been prepared following two synthetic pathways.

Synthesis of Tellurium-Containing π-Extended Aromatics with Room-Temperature Phosphorescence

A synthesis of tellurium-embedded π-extended aromatics from tellurium powder and readily available cyclic diaryliodonium salts has been developed. The versatility of this method has been demonstrated by the synthesis of various functionalized dibenzotellurophenes (DBTe's), a ladder-type π-system, and a heterosumanene. These compounds demonstrated good air/moisture stability and high thermal stability. Remarkably, many DBTe's exhibited interesting tunable room-temperature phosphorescence (RTP) in the solid state.

Synthesis and structure of an aryl-selenenium(II) cation, [C34H41N4Se+]2[Hg(SeCN)4]2-, based on a 5-tert-butyl-1,3-bis-(1-pentyl-1H-benzimidazol-2-yl)benzene scaffold

In the title salt, bis-{[5-tert-butyl-1,3-bis-(1-pentyl-1H-benzimidazol-2-yl)benzene]selenium} tetra-kis-(seleno-cyanato)-mercury, (C34H41N4Se)2[Hg(SeCN)4], the aryl-selenenium cations, [C34H41N4Se]+, are linked through [Hg(SeCN)4]2- anions by C-H⋯N hydrogen bonds. In the cation, the geometry around the Se atom in the 5-tert-butyl-1,3-bis-(1-pentyl-1H-benzimidazol-2-yl)benzene scaffold is T-shaped, resulting from the coordination of Se by the C atom of the central aromatic ring and the N atoms of both of the benzimidazole moieties. The trans Se-N bond lengths are almost equal [2.087 (3) and 2.099 (3) Å] and the Se-C bond length is 1.886 (3) Å. The N-Se-N angle is 159.29 (11)°. The geometry around the HgII atom in the [Hg(SeCN)4]2- anion is distorted tetra-hedral, with Se-Hg-Se angles ranging from 88.78 (3) to 126.64 (2)°. In [Hg(SeCN)4]2-, the Hg-Se bonds are unsymmetrical [2.5972 (4) and 2.7242 (5) Å]. One of the pentyl substituents is disordered over two equivalent conformations, with occupancies of 0.852 (8) and 0.148 (8).

Synthesis and structure of an aryl-tellurenium(II) cation; [4-tert-butyl-2,6-bis-(1-pentyl-1H-benz-imidazol-2-yl-κN3)phenyl-κC1]tellurium(II) (1,4-dioxane)tri-iodido-mercurate(II)

In the title salt, (C34H41N4Te)[HgI3(C4H8O2)], the aryl-tellurenium [C34H41N4Te]+ cations and [HgI3(dioxane)]- anions are linked by a short inter-action between the Te atom and one of the I-atom donors of the anion, as well as through weak C-H⋯I inter-actions. The geometry around the Te atom is T-shaped with the coordination comprising a C atom of the central aromatic ring and two N atom donors of the benzimidazolyl moiety. The Te-N bond lengths are almost equal [2.232 (3) and 2.244 (3) Å], while the Te-C bond length is 2.071 (4) Å. The N-Te-N bond angle is 150.68 (11)°. The HgII atom of the anion is coordinated by iodide ions from three sides and the fourth coordination site is occupied by an O atom of the solvent mol-ecule (dioxane). Thus, it attains a trigonal-pyrimidal geometry, with O-Hg-I angles ranging of 90.76 (8) and 96.76 (7)° and I-Hg-I angles ranging from 112.41 (1) to 125.10 (1)°. The cations and anions are involved in numerous weak π-π stacking inter-actions involving both the central phenyl ring and two inversion-related benzimidazole moieties, which propagate in the a-axis direction. In addition, there are numerous C-H⋯I inter-actions between the cations and anions, which link them into a complex three-dimensional array.

Synthesis and structure of arylselenium(ii) and aryltellurium(ii) cations based on rigid 5-tert-butyl-1,3-bis-(N-pentylbenzimidazol-2′-yl)benzenes

The transmetalation reactions of mercury precursor, [^Pentyl(N^C^N)HgCl] (19) with selenium and tellurium halides led to isolation of air stable NCN pincer based arylselenium(ii) and aryltellurium(ii) cations due to facile ionization of Se/Te halogen bond.

Programming Recognition Arrays through Double Chalcogen-Bonding Interactions

In this work, we have programmed and synthesized a recognition motif constructed around a chalcogenazolo-pyridine scaffold (CGP) that, through the formation of frontal double chalcogen-bonding interactions, associates into dimeric EX-type complexes. The reliability of the double chalcogen-bonding interaction has been shown at the solid-state by X-ray analysis, depicting the strongest recognition persistence for a Te-congener. The high recognition fidelity, chemical and thermal stability and easy derivatization at the 2-position makes CGP a convenient motif for constructing supramolecular architectures through programmed chalcogen-bonding interactions.

Synthesis of 2-acyl-benzo[1,3-d]selenazoles via domino oxidative cyclization of methyl ketones with bis(2-aminophenyl) diselenide

The synthesis of unprecedented 2-acyl-benzo[1,3-d]selenazoles is presented using bis(2-aminophenyl) diselenide and aryl methyl ketones under conventional heating and microwave irradiation.