Adsorption on Mesoporous Metal-Organic Frameworks in Solution: Aromatic and Heterocyclic Compounds

Tackling antibiotic contaminations in wastewater with novel Modified-MOF nanostructures: A study of molecular simulations and DFT calculations

The contamination of wastewater with antibiotics has emerged as a critical global challenge, with profound implications for environmental integrity and human well-being. Adsorption techniques have been meticulously investigated and developed to mitigate and alleviate their effects. In this study, we have investigated the adsorption behaviour of Erythromycin (ERY), Gentamicin (GEN), Levofloxacin (LEVO), and Metronidazole (MET) antibiotics as pharmaceutical contaminants (PHCs) on amide-functionalized (RC (=O)NH2)/MIL-53 (Al) (AMD/ML53A), using molecular simulations and density functional theory (DFT) calculations. Based on our DFT calculations, it becomes apparent that the adsorption tendencies of antibiotics are predominantly governed by the presence of AMD functional groups on the adsorbent surface. Specifically, hydrogen bonding (HB) and van der Waals (vdW) interactions between antibiotics and AMD groups serve as the primary mechanisms facilitating adsorption. Furthermore, we have observed that the adsorption behaviors of these antibiotics are influenced by their respective functional groups, molecular shapes, and sizes. Our molecular simulations delved into how the AMD/ML53A surfaces interact with antibiotics as PHCs. Moreover, various chemical quantum descriptors based on Frontier Molecular Orbitals (FMO) were explored to elucidate the extent of AMD/ML53A adsorption and to assess potential alterations in their electronic properties throughout the adsorption process. Monte Carlo simulation showed that ERY molecules adsorb stronger to the adsorbent in acidic and basic conditions than other contaminants, with high energies: -404.47 kcal/mol in acidic and -6375.26 kcal/mol in basic environments. Molecular dynamics (MD) simulations revealed parallel orientation for the ERY molecule's adsorption on AMD/ML53A with 80% rejection rate. In conclusion, our study highlighted the importance of modeling in developing practical solutions for removing antibiotics as PHCs from wastewater. The insights gained from our calculations can facilitate the design of more effective adsorption materials, ultimately leading to a more hygienic and sustainable ecosystem.

Investigation of light aromatics removal from industrial wastewater using nano metal organic framework

In this study, the adsorption of benzoic acid and phenols in the aqueous phase by MOF-Cu adsorbent was investigated. A high-performance liquid chromatography (HPLC) device was used to analyze the concentration of contaminants in the solution. Three isotherms, Freundlich, Langmuir, and Temkin were performed for adsorption of Benzoic Acid (BA) and Phenol contaminants. Correlation factor for adsorption isotherms were fitted into Langmuir aqueous BA and Phenol would be 99.89 and 99.98%, respectively. The equilibrium adsorption capacity MOF-Cu of BA and Phenol is 636.73 and 524.42 mg/g, respectively. In this study, high contaminant adsorption with π-π interaction and hydrogen bonding leads to the high capacity of MOFCu. In addition, the increase in adsorption capacity of benzoic acid is due to the electronegative property of oxygen in the carbonyl group and the similarity of the carboxylic acid functional group with the adsorbent. The result shows, that at initial time adsorption, has been a non-linear trend. In addition, the first-order kinetic model is not a suitable option for fitting the experimental data of adsorption kinetics and the adsorption kinetics of BA and Phenol is very well compatible with the semi-second order with the correlation Factor being 99.7 and 99.78, respectively. Also, the equilibrium adsorption capacity in pseudo-second order kinetic for BA and Phenol is 613.5 and 523.56 mg/g respectively.

Synthesis of metal anthranilate complexes: catalytic and antipathogenic studies

Background

Anthranilic acid is an active compound with diverse biological activities such as anti-inflammatory, antineoplastic, anti-malarial and α-glucosidase inhibitory properties. It can also chelate transition metals to form complexes with applications as antipathogens, photoluminescent materials, corrosion inhibitors, and catalysts.

Results

Anthranilic acid complexes (1–10) of Zn(II), Bi(III), Ag(I), Fe(II), Co(II), Cu(II), Mn(II), Al, Ni(II), and Cr(III) were synthesized and characterized using thermogravimetric (TGA), elemental analysis, FT-IR, UV–vis spectrometry, mass spectrometry and magnetic susceptibility. The morphology and size of metal complex (1–10) particles were determined by scanning electron microscope (SEM) and the surface area was determined by BET analysis. TGA and CHN analysis data indicated that the stoichiometries of complexes were 1:2 metal/ligand except for Ag(I), Al and Bi. Furthermore, DFT study was performed to optimize the structure of selected complexes. The complexes (1–10) were evaluated for their catalytic activity in the reduction of 4-nitrophenol (4-NP), antibacterial activity against S. aureus, P. aeroginosa and E. coli as well as their antifungal activity against F. solani and A. niger. The complexes were also tested against the second-stage juveniles (J₂) root-knot nematodes.

Conclusion

Co(II) complex 5 and Cu(II) complex 6 showed high catalytic activity for the reduction of 4-NP to 4-aminophenol (4-AP). Ag(I) complex 3 showed the best activity against the pathogens that were tested namely clinically important bacteria S. aureus, P. aeroginosa and E. coli, commercially important fungi F. solani and A. niger and J₂ root-knot nematodes M. javanica.

Physicochemical Modeling of the Adsorption of Pharmaceuticals on MIL-100-Fe and MIL-101-Fe MOFs

The adsorption of naproxen (NAP), diclofenac (DFC), and acetaminophen (APAP) molecules from aqueous solutions using MIL-100-Fe and MIL-101-Fe metal organic frameworks (MOFs) has been analyzed and modeled. Adsorption isotherms of these pharmaceuticals were experimentally quantified at 30 and 40°C and pH 7. Textural parameters and surface chemistry of these MOFs were analyzed, and results were utilized to explain the pharmaceutical adsorption mechanism. Density Functional Theory (DFT) calculations were performed to understand the reactivity of pharmaceutical molecules, and a statistical physics model was employed to calculate the main physicochemical parameters related to the adsorption mechanism. Results showed that the adsorption of these pharmaceuticals on MOFs was multimolecular and exothermic. Both MOFs displayed the highest adsorption capacities, up to 2.19 and 1.71 mmol/g, for NAP and DFC molecules, respectively. MIL-101-Fe showed better pharmaceutical adsorption properties than MIL-100-Fe due to its highest content of Fe-O clusters and mesopore volume. Adsorption mechanism of these organic molecules could involve hydrogen bond, van der Waals forces, and electrostatic interactions with MOF surfaces. In particular, MIL-101-Fe MOF is a promising material to prepare composites with competitive adsorption capacities for facing the water pollution caused by pharmaceutical compounds.

Hygroscopic metal-organic framework MIL-160(Al): In-situ time-dependent ATR-FTIR and gravimetric study of mechanism and kinetics of water vapor sorption

Metal-organic frameworks (MOFs) are advanced highly porous coordination polymers of high interest to separations, environmental remediation, catalysis, and biomedicine. While many MOFs are unstable in water and aqueous solutions, aluminum MOFs (Al-MOFs) offer an unprecedented stability. First, we synthesize unusual highly hygroscopic Al-MOF MIL-160(Al), purify it and assign FTIR peaks to specific groups as potential water binding sites. Further, we introduce a novel method of in-situ time-dependent ATR-FTIR spectroscopy to detect specific binding sites in MIL-160(Al) and investigate the progress of reaction. Specifically, we combine in-situ time-dependent ATR-FTIR spectroscopy with using water as "spectroscopic probe" to determine binding sites in MIL-160(Al) and their evolution during the reaction. The in-situ time-dependent ATR-FTIR spectra provide evidence of water bonding to: the μ-OH group, the carboxylate anion COO^- in 2,5-FDCA^2- linker, oxygen atom in the furan ring of the linker, and the C-C and C-H bonds of the furan ring of the linker. Then, we conduct mechanistic and kinetic study of sorption of water vapor on MIL-160(Al) in air using the combination of two complementary in-situ time-dependent methods: the ATR-FTIR spectroscopy and gravimetric analysis. Water vapor sorption on MIL-160(Al) results in the solid-state adsorption complex with up to four water molecules per unit of MIL-160(Al). Chemical kinetics of water sorption on MIL-160(Al) follows a pseudo-first order rate law and it is consistent with dynamics and timescale revealed by in-situ time-dependent ATR-FTIR. The combination of two in-situ time-dependent methods, the ATR-FTIR spectroscopy and gravimetry, forms a new powerful experimental approach to facilely study mechanisms, stoichiometry and chemical kinetics of various solid-gas reactions in the ambient and controlled environments.

The anionic Zn-MOF composed of 1D columnar SBUs for highly C2H2/CH4 selective adsorption, dye adsorption and fluorescence sensing

An anionic three-dimensional framework {(Me2NH2)2[Zn8(L)6(ad)4(μ4-O)]·10DMF·11H2O}(Zn-MOF, L2-=4,4'-(3-aminopyridine-2,5-diyl)dibenzoic acid, ad-=adeninate) with a column-layered structure was synthesized. Structural studies show that the Zn-MOF has octahedral cages [Zn8(ad)4(μ4-O)], adjacent cages are connected by O...

A porphyrin-based metal-organic framework with highly efficient adsorption and photocatalytic degradation of organic dyes

Organic dye pollution has become an urgent issue due to their toxicity to humans and potential for damage to the environment. However, achieving highly efficient adsorption and degradation materials for...

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Adsorption of Malachite Green and Alizarin Red S Dyes Using Fe-BTC Metal Organic Framework as Adsorbent

Synthetic organic dyes are widely used in various industrial sectors but are also among the most harmful water pollutants. In the last decade, significant efforts have been made to develop improved materials for the removal of dyes from water, in particular, on nanostructured adsorbent materials. Metal organic frameworks (MOFs) are an attractive class of hybrid nanostructured materials with an extremely wide range of applications including adsorption. In the present work, an iron-based Fe-BTC MOF, prepared according to a rapid, aqueous-based procedure, was used as an adsorbent for the removal of alizarin red S (ARS) and malachite green (MG) dyes from water. The synthesized material was characterized in detail, while the adsorption of the dyes was monitored by UV-Vis spectroscopy. An optimal adsorption pH of 4, likely due to the establishment of favorable interactions between dyes and Fe-BTC, was found. At this pH and at a temperature of 298 K, adsorption equilibrium was reached in less than 30 min following a pseudo-second order kinetics, with k″ of 4.29 × 10⁻³ and 3.98 × 10⁻² g∙mg⁻¹ min⁻¹ for ARS and MG, respectively. The adsorption isotherm followed the Langmuir model with maximal adsorption capacities of 80 mg∙g⁻¹ (ARS) and 177 mg∙g⁻¹ (MG), and K_L of 9.30·10³ L∙mg⁻¹ (ARS) and 51.56·10³ L∙mg⁻¹ (MG).

Coordination distortion induced water adsorption in hydrophobic flexible metal-organic frameworks

Herein, we synthesized four isostructural flexible interdigitated hydrophobic metal-organic frameworks that differ only in their central metal ion. The water-adsorption properties are dependent on the metal species, which was revealed to be caused by coordination distortion around the metal ions.

Selective adsorption mechanisms of pharmaceuticals on benzene-1,4-dicarboxylic acid-based MOFs: Effects of a flexible framework, adsorptive interactions and the DFT study

The synergetic effects of benzene-1,4-dicarboxylic acid (BDC) linker structure and the metal cluster of MOFs on adsorption mechanisms of carbamazepine, ciprofloxacin and mefenamic acid were investigated in single and mixed solutions. A 1D flexible framework MIL-53(Al), 3D rigid framework UiO-66(Zr) and 3D flexible framework MIL-88B(Fe) were applied as adsorbents. The breathing effect of MIL-53(Al) caused by its flexible structure can enhance intraparticle diffusion for all pharmaceuticals and perform a critical role in excellent adsorption performances. The 3D rigid BDC structure of UiO-66(Zr) caused a steric effect that reflected low or negligible adsorption. Unless concerning accessibility through the internal structure of the MOFs, the binding strengths calculated by the DFT study were in the following order: MIL-88B(Fe) > MIL-53(Al) > UiO-66(Zr). The Fe cluster in MIL-88B(Fe) seems to have the highest affinity for the carboxylic group of pharmaceuticals compared with Al and Zr; however, the lower porosity of MIL-88B(Fe) might limit the adsorption capacity. Moreover, in mixed solutions, the higher acidity of mefenamic acid can enhance competitive performance in interactions with the metal cation cluster of each MOF. Together with the breathing effect, H-bonding and π-π interaction were shown to be the alternative interactions of synergetic adsorption mechanisms.

Simulation of the Adsorption and Release of Large Drugs by ZIF-8

The adsorption and release of two drugs 5FU (5-fluorouracil) and CAF (caffeine) into and from the ZIF-8 framework were simulated by the Gibbs-ensemble Monte Carlo approach employing two models for representing the sorbent: one without surface (ZIF-8P) and another with surface (ZIF-8S). The inner pores of ZIF-8S were inaccessible to the drugs, but accessible to the solvents (methanol or water). The ZIF-8P model is not recommended to describe the actual sorption processes because it lacks surface and solvent effects, which are reflected in the poor quantitative agreement with experimental results. The ZIF-8S model yielded results for the sorption of CAF in very close agreement with the experimental loading from methanol solution and release of the drug into water. For 5FU, the computer simulations provided qualitative agreements, which suggests that the sorbent-5FU interaction potentials should be improved. The excellent performance of the ZIF-8S model is due to its adequate description of the surface and by exposing adsorption sites such as undercoordinated zinc ions to interactions with large molecules. This was achieved by applying periodic conditions to a ZIF-8 nanocrystal, instead of an elementary cell, which is easy to generalize and used to describe several surface defects. Furthermore, the combination of this ZIF-8S model with the Monte Carlo method provides a very simple and efficient approach to simulate the inaccessibility of the ZIF-8 inner porosity to large molecules. Namely, any trial moves that inserted the drug within the pore were disregarded. This is a quite simple and general approach that can be promptly applied to a large number of MOF sorbents and of drugs that cannot access the inner pores.

Swell and Destroy: A Metal-Organic Framework-Containing Polymer Sponge That Immobilizes and Catalytically Degrades Nerve Agents

Organophosphorus chemical warfare agents function as potent neurotoxins. Whilst the destruction of nerve agents is most readily achieved by hydrolysis, their storage and transport are hazardous and lethal in milligram doses, with any spillage resulting in fatalities. Furthermore, current decontamination and remediation measures are limited by a need for stoichiometric reagents, solvents, and buffered solutions, complicating the process for the treatment of bulk contaminants. Herein, we report a composite polymer material capable of rendering bulk VX unusable by immobilization within a porous polymer until a metal-organic framework (MOF) catalyst fully hydrolyzes the neurotoxin. This is an all-in-one capability that minimizes the use of multiple reagents, facilitated by a porous high internal phase emulsion-based polystyrene monolith housing an active zirconia MOF catalyst (MOF-808); the porous polymer absorbs and immobilizes the liquid agents, while the MOF enables hydrolysis. The dichotomous hierarchy of porous materials facilitates the containment and rapid hydrolysis of VX (>80% degradation in 8 h) in the presence of excess H₂O. This composite can further enable the hydrolysis of neat VX with reliance on ambient humidity (>95% in 11 days). Potentially, 4.5 kg of the composite can absorb, immobilize, and degrade the contents of a standard chemical drum/barrel (208 L, 55 gal) of the chemical warfare agent (CWA). We believe that this composite is the first example of what will be the go-to approach for CWA immobilization and degradation in the future. Furthermore, we believe that this demonstration of a catalytically reusable absorbent sponge provides a signpost for the development of similar materials where immobilization of a substrate in a catalytically active environment is desirable.

Recent advances for dyes removal using novel adsorbents: A review

Dyeing wastewaters are toxic and carcinogenic to both aquatic life and human beings. Adsorption technology, as a facile and effective method, has been extensively used for removing dyes from aqueous solutions for decades. Numerous researchers have attempted to seek or design alternative materials for dye adsorption. However, using various novel adsorbents to remove dyes has not been extensively reviewed before. In this review, the key advancement on the preparation and modification of novel adsorbents and their adsorption capacities for dyes removal under various conditions have been highlighted and discussed. Specific adsorption mechanisms and functionalization methods, particularly for increasing adsorption capacities are discussed for each adsorbent. This review article mainly includes (1) the categorization, side effects and removal technologies of dyes; (2) the characteristics, advantages and limitations of each sort of adsorbents; (3) the functionalization and modification methods and controlling mechanisms; and (4) discussion on the problems and future perspectives about adsorption technology from adsorbents aspects and practical application aspects.

Inverse Mixed-Mode Chromatography for the Evaluation of Multivalency and Cooperativity of Host-Guest Complexation in Porous Materials

A new separation-based analytical method was developed to evaluate the multivalency and cooperativity of supramolecular host-guest complexation in porous materials. The method is based on inverse mixed-mode chromatography in which a porous material with a multivalent functional group is packed into a column and bound with a complementary guest molecule to form a multivalent complex. The bound guest molecules are eluted in the mobile phase and detected by appropriate methods such as UV absorption. The retention factor of the guest molecule is determined and broken down into the contributions of noncovalent interactions between binding sites (e.g., hydrophobic and ionic components), thereby calculating the effective molarity and cooperativity factor of the complexation. Two model systems denoted as RP/SCX and RP/SAX were analyzed by the established method. On average, the RP/SCX system has an effective molarity (EM) of 0.14 M and a cooperativity factor (β) of 0.86, while the RP/SAX system has an EM value of 0.18 M and a β value of 2.3. Interestingly, experiments have shown that these values do not change with changes in the intrinsic binding strength of the constituent sites. In summary, the developed method allows for quantitative assessment of multivalency and cooperativity effects in porous materials, providing a valuable complement to the analytical toolbox for supramolecular chemists and materials scientists.

Mesoporous Metal-Organic Frameworks: Synthetic Strategies and Emerging Applications

Metal-organic frameworks (MOFs) have attracted much attention over the past two decades due to their highly promising applications not only in the fields of gas storage, separation, catalysis, drug delivery, and sensors, but also in relatively new fields such as electric, magnetic, and optical materials resulting from their extremely high surface areas, open channels and large pore cavities compared with traditional porous materials like carbon and inorganic zeolites. Particularly, MOFs involving pores within the mesoscopic scale possess unique textural properties, leading to a series of research in the design and applications of mesoporous MOFs. Unlike previous Reviews, apart from focusing on recent advances in the synthetic routes, unique characteristics and applications of mesoporous MOFs, this Review also mentions the derivatives, composites, and hierarchical MOF-based systems that contain mesoporosity, and technical boundaries and challenges brought by the drawbacks of mesoporosity. Moreover, this Review subsequently reveals promising perspectives of how recently discovered approaches to different morphologies of MOFs (not necessarily entirely mesoporous) and their corresponding performances can be extended to minimize the shortcomings of mesoporosity, thus providing a wider and brighter scope of future research into mesoporous MOFs, but not just limited to the finite progress in the target substances alone.

Recent advances in metal-organic frameworks for adsorption of common aromatic pollutants

This review (with 85 refs.) summarizes the recent literature on the adsorption of common aromatic pollutants by using modified metal-organic frameworks (MOFs). Four kinds of aromatic pollutants are discussed, namely benzene homologues, polycyclic aromatic hydrocarbons (PAHs), organic dyes and their intermediates, and pharmaceuticals and personal care products (PPCPs). MOFs are shown to be excellent adsorbents that can be employed to both the elimination of pollutants and to their extraction and quantitation. Adsorption mechanisms and interactions between aromatic pollutants and MOFs are discussed. Finally, the actual challenges of existence and the perspective routes towards future improvements in the field are addressed. Graphical abstract Recent advance on adsorption of common aromatic pollutants including benzene series, polycyclic aromatic hydrocarbons, organic dyes and their intermediates, pharmaceuticals and personal care products by metal-organic frameworks.

Enhanced acidity of defective MOF-808: effects of the activation process and missing linker defects

Thermal activation processes modify the structure and acidity of Zr-based MOFs.

Selective high adsorption capacity for Congo red dye of a new 3D supramolecular complex and its magnetic hybrid

A new pentacoordinated Cd(ii)-CP based on a flexible nitrogen donor ligand (L) and a corresponding core–shell magnetic Fe₃O₄@SiO₂-NH₂@Cd(ii)-CP hybrid have been synthesized by ultrasonic irradiation. The products can be proposed as good recyclable adsorbents for the selective adsorption of Congo red dye.

MOF the beaten track: unusual structures and uncommon applications of metal-organic frameworks

Over the past few decades, metal-organic frameworks (MOFs) have proved themselves as strong contenders in the world of porous materials, standing alongside established classes of compounds such as zeolites and activated carbons. Following extensive investigation into the porosity of these materials and their gas uptake properties, the MOF community are now branching away from these heavily researched areas, and venturing into unexplored avenues. Ranging from novel synthetic routes to post-synthetic functionalisation of frameworks, host-guest properties to sensing abilities, this review takes a sidestep away from increasingly 'traditional' approaches in the field, and details some of the more curious qualities of this relatively young family of materials.

Study of Adsorption and Desorption Performances of Zr-Based Metal-Organic Frameworks Using Paper Spray Mass Spectrometry

The dynamic pore systems and high surface areas of flexible metal-organic framework materials make them excellent candidates to be used in different kinds of adsorption processes. However, the adsorption and desorption behaviors of therapeutic drugs on metal-organic frameworks in solution are not fully developed. Here, we systematically investigated the adsorption and desorption behaviors of a typical therapeutic drug, verapamil, over several Zr-based metal-organic frameworks [e.g., Zr-FUM, UiO-66(Zr), UiO-66(Zr)-NH₂ and UiO-66(Zr)-2COOH] as well as ZrO₂ in an acetonitrile solution by using paper spray mass spectrometry. In contrast to other materials, UiO-66(Zr)-2COOH demonstrated a superior adsorption performance to verapamil due to their strong acid-base and/or hydrogen-bond interactions, and the adsorption process fitted well with the pseudo-second-order kinetic model. As verapamil-adsorbed materials were used for desorption experiments, ZrO₂ demonstrated the most favorable desorption performance, whereas UiO-66(Zr)-2COOH yielded the poorest desorption capability. These Zr-based materials had also been coated at the surface with filter papers for the analysis of various drugs and proteins in the process of paper spray mass spectrometry. The results demonstrated that among the studied materials, ZrO₂-coated paper gave the most favorable desorption performance as a pure drug solution, whereas the paper from UiO-66(Zr) demonstrated the optimal capability in the analyses of therapeutic drugs in a complex matrix (e.g., blood) and a protein (e.g., myoglobin).

Synthesis and photo-/electro-catalytic properties of a 3D POMOF material based on an interpenetrated copper coordination polymer linked by in situ dual ligands and Dawson-type phosphotungstates

A 3D Keggin POMOF based on a unique Cu/pz/pzc MOF was prepared and employed to degradation of typical dyes.

Synthesis, characterization, and water adsorption properties of a novel multi-walled carbon nanotube/MIL-100(Fe) composite

In situ hydrothermal synthesis of MWCNT/MIL-100(Fe) composites can combine all the attributes required of a commercial adsorbent into a single material designed for high-performance adsorption chillers.