Preparation of intrinsically fragile bent crystals

Although molecular crystals have long been considered to be intrinsically brittle, a study of molecular crystals that are capable of plastic or elastic bending upon applying mechanical stress recently attracted significant attention. Malleable molecular crystals often need to meet specific criteria regarding the intermolecular interaction patterns within the crystal structure. Accordingly, examples have been reported where one polymorph shows bending, while other polymorphs of the same compound exhibit fracturing upon exposure to mechanical force. Here, we have succeeded in preparing bent crystals of an intrinsically fragile polymorph. Methylated flufenamic acid (1) can form three different polymorphs, i.e., 1α, 1β, and 1γ, of which 1β is difficult to isolate. Under mechanical force, the crystals of 1α exhibit remarkable plastic deformation, while those of 1γ are readily broken. Similar to the mechanical properties, the emission properties of 1 differ depending on the polymorph, i.e., 1γ exhibits a shorter-wavelength emission maximum and much higher emission quantum yield than 1α. Remarkably, both the unbent and bent forms of the 1α crystals can undergo a phase transition to the 1γ phase upon exposure to ethyl acetate. In this manner, phase transitions of the mechanically bent crystals of polymorph 1α afforded bent crystals of the intrinsically fragile polymorph 1γ. These findings may lead to a potential post-modification method for the preparation of functional flexible materials with enhanced emission properties in order to expand their applications.

Solution-state mechanochromic luminescence of Pt(ii)-complexes displayed within micellar aromatic capsules

Mechanochromic luminescence (MCL) is an intrinsic phenomenon in the solid state and thus has been hardly observed in solution so far. Here we report that arylethynyl Pt(ii)-complexes with an NCN-pincer ligand are efficiently encapsulated by micellar aromatic capsules in water, through a simple grinding protocol with bent amphiphiles. When a bent pentamethylbenzene-based amphiphile is employed as an optimized capsule component, the resultant host-guest composite, with an average diameter of ∼4 nm, is obtained in water at room temperature. Notably, the nanocomposite displays strong red emission (Φ = 33%, λmax = 700 nm) derived from MCL via intermolecular Pt(ii)⋯Pt(ii) interactions even under aerobic aqueous conditions, in sharp contrast to the free Pt(ii)-complex with weak green emission (Φ = 4%, λmax = 500 nm) in CH2Cl2. Moreover, enhancement of the solution-state MCL (up to Φ = 48%) can be achieved by coencapsulation of the Pt(ii)-complexes with carbazole derivatives by the capsule in water. This study provides the first example of "solution-state" mechanochromic luminescence, capable of facilely tuning its intensity and wavelength, among the intensive studies of various solid-state MCL reported previously.

Self-Assembled Encapsulation of CuX2- (X = Br, Cl) in a Gold Phosphine Box-like Cavity with Metallophilic Au-Cu Interactions

Synthetic routes to the crystallization of two new box-like complexes, [Au6(Triphos)4(CuBr2)](OTf)5·(CH2Cl2)3·(CH3OH)3·(H2O)4 (1) and [Au6(Triphos)4 (CuCl2)](PF6)5·(CH2Cl2)4 (2) (triphos = bis(2-diphenylphosphinoethyl)phenylphosphine), have been developed. The two centrosymmetric cationic complexes have been structurally characterized through single-crystal X-ray diffraction and shown to contain a CuX2- (X = Br or Cl) unit suspended between two Au(I) centers without the involvement of bridging ligands. These colorless crystals display green luminescence (λem = 527 nm) for (1) and teal luminescence (λem = 464 nm) for (2). Computational results document the metallophilic interactions that are involved in positioning the Cu(I) center between the two Au(I) ions and in the luminescence.

Elastic and bright assembly-induced luminescent crystals of platinum(II) complexes with near-unity emission quantum yield

Molecular crystals of Pt(II) complexes with metallophilic interactions can provide bright assembly-induced luminescence with colour tunability. However, the brittleness of many of these crystals makes their application in flexible optical materials difficult. Herein, we have achieved the elastic deformation of crystals of polyhalogenated Pt(II) complexes exhibiting bright assembly-induced luminescence. A crystal of [Pt(bpic)(dFppy)] (Hbpic = 5-bromopicolinic acid, HdFppy = 2-(2,4-difluorophenyl)pyridine) and a co-crystal of [Pt(bpic)(dFppy)] and [Pt(bpic)(ppy)] (Hppy = 2-phenylpyridine) were found to exhibit significant elastic deformation due to their highly anisotropic interaction topologies. While the crystal of [Pt(bpic)(dFppy)] exhibited monomer-based ligand-centred ³ππ* emission with an emission quantum yield of 0.40, the co-crystal exhibited bright, triplet metal-metal-to-ligand charge transfer (³MMLCT) emission owing to Pt⋯Pt interactions, thereby achieving a significantly higher emission quantum yield of 0.94.

Luminescent Pt(II) Complexes Containing (1-Aza-15-crown-5)dithiocarbamate and (1-Aza-18-crown-6)dithiocarbamate: Mechanochromic and Solvent-Induced Luminescence

The strong tendency to stack in the solid state and rich luminescence for the Pt(II) complexes makes them potential candidates as new mechanochromic materials and sensing applications. Six mononuclear complexes [Pt(ppy)(O₄NCS₂)] (1), [Pt(bpy)(O₄NCS₂)]ClO₄ (2), [Pt(ppy)(O₅NCS₂)] (3), [Pt(phen)(O₄NCS₂)]ClO₄·CH₃OH (5a), [Pt(phen)(O₄NCS₂)]ClO₄ (5b), and [Pt(phen)(O₅NCS₂)]ClO₄ (6a), one dinuclear complex [Pt₂(phen)₂(NaO₅NCS₂)₂(ClO₄)₃]ClO₄ (6b), and one one-dimensional (1-D) coordination polymer {[Pt₂(bpy)₂(NaO₅NCS₂)₂(ClO₄)₂](ClO₄)₂}_n (4) were synthesized by reacting [Pt(ppy)Cl]₂, Pt(bpy)Cl₂, and Pt(phen)Cl₂ (ppy = 2-phenylpyridine, bpy = 2,2'-bipyridine, and phen = 1,10-phenanthroline) with (1-aza-15-crown-5)dithiocarbamate (O₄NCS₂) or (1-aza-18-crown-6)dithiocarbamate (O₅NCS₂), respectively, which have been isolated and structurally characterized by X-ray diffraction. Neutral complexes 1 and 3 contain no intermolecular Pt(II)···Pt(II) contact, whereas cationic complexes 2, 5a, 5b, and 6a with ClO₄^- as counteranions show alternative intermolecular Pt(II)···Pt(II) contacts of 3.535/4.091, 3.480/5.001, 3.527/4.571, and 3.446/4.987 Å in the solid state, respectively. Interestingly, complex 4 forms a 1-D coordination polymer through coordination between the encapsulated Na⁺ ions inside the azacrown ether rings of O₅NCS₂ and ClO₄^- anions with respective intra- and intermolecular Pt(II)···Pt(II) contacts of 3.402 and 3.847 Å in crystal lattices, whereas a dinuclear complex 6b was surprisingly formed and also connected by the encapsulated Na⁺ ions and ClO₄^- anions with alternative intra- and intermolecular Pt(II)···Pt(II) contacts of 3.650 and 3.677/4.4.372 Å, respectively. Upon excitation, complexes 1 and 3 showed similar vibronic luminescence at 507, 534, and 502, 532 nm, respectively, and the other complexes 2 and 4-6 showed broad luminescence with maxima at 537-567 nm. The B3LYP/LanL2DZ calculation was carried out and used to clarify their excited-state properties. In addition, the powder samples for complexes 1-4 almost showed no energy shift for the luminescence and significantly those of complexes 5-6 exhibited the mechanochromic luminescence upon grinding. It is noted that complexes 5a and 6a only showed minor red shifts (i.e., from 544 to 556 nm for complex 5a and from 551 to 565 nm for complex 6a), whereas complex 6b exhibited a remarkable red shift from 558 to 603 nm upon grinding. Besides, their luminescence reversibility was also examined toward various solvents.

Supramolecular assembly and structural transformation of d10-metal complexes containing (aza-15-crown-5)dithiocarbamate

[Au(O4NCS2)]2 underwent structural transformation by heating to give [Au(O4NCS2)]6. Moreover, [Ag(O4NCS2)]n and [Cu(O4NCS2)]4 can be isolated, and notably [Cu(O4NCS2)]4 structurally transformed to [Cu(O4NCS2)]8 by heating can be also observed.

Luminescent polymorphic crystals: mechanoresponsive and multicolor-emissive properties

Polymorphic organic crystals that can switch their photophysical properties in response to mechanical stimuli are highlighted.

Mechanical twinning in organic crystals

Various kinds of organic crystals can deform beyond their elastic limit, show unique mechanical properties, and switch directions of anisotropic functions by mechanical twinning based on stress-induced molecular movements.

Introduction of a Luminophore into Generic Polymers via Mechanoradical Coupling with a Prefluorescent Reagent

Herein, we report a novel strategy for introducing a luminophore into generic polymers facilitated by mechanical stimulation. In this study, polymeric mechanoradicals were formed in situ under ball-milling conditions to undergo radical-radical coupling with a prefluorescent nitroxide-based reagent in order to incorporate a luminophore into the polymer main chains via a covalent bond. This method allowed the direct and conceptually simple preparation of luminescent polymeric materials from a wide range of generic polymers such as polystyrene, polymethyl methacrylate, and polyethylene. These results indicate that the present mechanoradical coupling strategy may help to transform existing commodity polymers into more valuable functional materials.

Ligand-Triggered Platinum(II) Metallacycle with Mechanochromic and Vapochromic Responses

Supramolecular coordination complexes with solid-state stimuli-responsive characteristics are highly desirable but are rarely reported. Herein, we describe two coordination-driven self-assembled monoanthracene or dianthracene-based hexagonal metallacycles by subtle structure modification. Notably, the dianthracene-containing hexagon 1 exhibits tricolor mechanochromic and vapochromic characteristics, while the monoanthracene-containing hexagon 4 does not show obvious changes toward mechanical force. Further studies have indicated that changes in hexagon 1, especially the ulterior anthracene of hexagon 1 in the molecular stacking through intermolecular interactions toward external stimuli, are responsible for the above behavioral differences. Furthermore, the present work also demonstrates a novel light-harvesting strategy for achieving high-contrast mechanochromic fluorescence involving solid-state energy transfer from hexagon 1 to an organic carbazole derivant 6 without mechanofluorochromism or tetraphenylethylene derivant 7 exhibiting inconspicuous mechanofluorochromism.

Solvent-Induced Luminescence and Structural Transformation of a Dinuclear Gold(I) (Aza-18-crown-6)dithiocarbamate Compound

The reaction of AuCl(SMe₂) with equimolar NaO₅NCS₂ [O₅NCS₂ = (aza-18-crown-6)dithiocarbamate] in CH₃CN gave [Au₂(O₅NCS₂)₂]·2CH₃CN (2·2CH₃CN), where six other 2·solvates (solvates = 2DMF, 2DMSO, 2THF, 2acetone, 1.5toluene, and 1.5anisole) can be successfully isolated from different crystal-growing processes (i.e., ether diffusion, layer method, or evaporation in air) by dissolving the dry powder samples of 2·2CH₃CN in the respective solvents, and their crystal structures are all determined by X-ray diffraction as well. It is noted that there are different intermolecular Au(I)···Au(I) contacts in combination with various luminescences for 2·solvates and indeed there is a close relationship between intermolecular Au(I)···Au(I) contacts [i.e., 2.8254(7)-2.9420(5) Å] and luminescence energies (i.e., 554-604 nm), including three examples of 2·2CH₃CN, 2·0.5m-xylene, and 2·tert-butylbenzene·H₂O reported in our previous work. In 2·solvates, the toluene and tert-butylbenzene solvates have the shortest [2.8254(7)-2.8289(7) Å] and longest [2.9420(5) Å] intermolecular Au(I)···Au(I) contacts, respectively, and consequently they show the respective lowest (604 nm) and highest (554 nm) luminescence energies. Indeed, 2·solvates exhibit different types of time-dependent luminescence upon solvate loss in air. Furthermore, B3LYP/LanL2DZ calculation results can help to clarify the relationship between intermolecular Au(I)···Au(I) contacts and luminescence energies for 2·solvates.

Understanding the elastic bending mechanism in a 9,10-anthraquinone crystal through thermal expansion study

Thermal expansion study has been used to understand the mechanism of elastic bending in 9,10-anthraquinone. Expansion along the bending axis due to bending is expected to resemble the thermal expansion along the same direction.

Elastic deformability and luminescence of crystals of polyhalogenated platinum(ii)–bipyridine complexes

A series of polyhalogenated platinum(ii)–bipyridine complexes showed solvent-of-crystallisation-dependent elastic flexibility and luminescence.

Functional flexible molecular crystals: intrinsic and mechanoresponsive properties

Flexible molecular crystals have attracted much attention to unique optoelectronic applications and stimuli-responsive chemistry, resulting in various functional molecular crystals for controlling photons, phonons, electrons, and magnons.

A high contrast mechanochromic luminescent diacetylene-linked bis-benzothiadiazole derivative

A rod-shaped self-assembling diacetylene-linked bis-benzothiadiazole derivative presents a high contrast luminescence phase transformation upon shearing which is reversed upon heating.

Vapochromic luminescence of a spin-coated copper(I) complex thin film by the direct coordination of vapour molecules

A homogeneous thin film of a simple and highly luminescent Cu(i) complex, [CuI(PPh3)2(py)] (PPh3 = triphenylphosphine, py = pyridine) (Cu-py), was fabricated via spin coating using polyvinylpyrrolidone (PVP) and pyridine without destroying the complex. The thin film (Cu-py@PVP), with a thickness of 1 μm, exhibited efficient response to vapour, exhibiting reversible luminescence changes between blue-green and yellow upon exposure to vapours of N-heteroaromatic compounds such as py and 2-methylpyrazine (Mepyz). Vapochromic luminescence colour change resulting from ligand substitution was also observed in the crystal state, but the response of the thin film was remarkably faster than that of the crystalline samples. The vapour-induced ligand exchange on the thin film was fully characterised by comparing the luminescence properties of the Cu-py crystal with the newly prepared Cu(i) complex, [CuI(Mepyz)(PPh3)2] (Cu-Mepyz).

Untangling the Mechanochromic Properties of Benzothiadiazole-Based Luminescent Polymorphs through Supramolecular Organic Framework Topology

Two new luminophore polymorphs of 4-bromo-7-(4-nonylphenyl)benzo[c][1,2,5]thiadiazole (1α and 1β) exhibiting different color emissions, which switch into each other in response to shear force and solvent vapors, are presented and their X-ray structure is determined. Supramolecular organic framework topology (SOFT) studies on the two polymorphic structures led us to conclude that the mechanochromic phase transformation can be explained on the basis of modifications in their respective topological nets: mab and pcu for 1α and 1β, respectively, as a result of the breaking and restoration of a number of weak supramolecular interactions. The color changes accompanying this transformation have been rationalized with the help of time-dependent density functional theory. We firmly believe that our findings will inspire future research on the design of novel stimuli-responsive organic materials with switchable properties based on their supramolecular interactions by establishing clear SOFT-property relationships.

Solvent vapor-induced polarity and ferroelectricity switching

Vapor-induced crystal to crystal transformation between non-polar [Fe(sap)(acac)(sol)] (H₂sap = 2-salicylideneaminophenol, acac = acethylacetate, sol = MeOH, pyridine) and polar [Fe(sap)(acac)(DMSO)] was demonstrated. It provides an example of switchable ferroelectric behaviour attributted to the structural phase transition triggered by solvent vapour.

Crystals of Benzamide, the First Polymorphous Molecular Compound, Are Helicoidal

The growth of spontaneously twisted crystals is a common but poorly understood phenomenon. An analysis of the formation of twisted crystals of a metastable benzamide polymorph (form II) crystallizing from highly supersaturated aqueous and ethanol solutions is given here. Benzamide, the first polymorphic molecular crystal reported (1832), would have been the first helicoidal crystal observed had the original authors undertaken an analysis by light microscopy. Polymorphism and twisting frequently concur as they are both associated with high thermodynamic driving forces for crystallization. Optical and electron microscopies as well as electron and powder X-ray diffraction reveal a complex lamellar structure of benzamide form II needle-like crystals. The internal stress produced by the overgrowth of lamellae is shown to be able to create a twist moment that is responsible for the observed non-classical morphologies.

Photoreversible Birefringence Change of Diarylethene Single Crystals as Revealed by Change in Molecular Polarizability Anisotropy

Stimuli-responsive organic crystals represent a new frontier of material chemistry. Recently, we have reported photoreversible interference color change to multicolor in single crystals composed of a photochromic diarylethene derivative, 1,2-bis(2-ethyl-5-phenyl-3-thienyl)perfluorocyclopentene (1a), accompanied by the photochromic reaction. The origin of the interference color change is due to the photoinduced birefringence change in the photoisomerization of diarylethenes. In this study, we newly found that single crystals composed of 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2a) also exhibit a photoreversible interference color change. The birefringence value for crystal 2a increased with the photocyclization conversion, while that for crystal 1a decreased. The relationship between the photoinduced birefringence changes for crystals 1a and 2a and their molecular structures was discussed based on the change in the molecular polarizability anisotropy accompanied by the photochromic reaction. These results would provide not only new opportunities for the application of photochromic crystals but also useful strategies for the design of crystalline materials that exhibit the desired birefringence change.

Stimuli-Responsive Benzothiadiazole Derivative as a Dopant for Rewritable Polymer Blends

A new rod-shaped benzothiadiazole fluorophore, namely, 4,7-di-(4-nonylphenyl)benzo[c][1,2,5]thiadiazole, which strongly emits fluorescence both in solution and in solid state has been synthesized, and its photophysical properties were rationalized with the help of density functional theory calculations. This molecule crystallizes in two distinct light-emitting crystalline phases, which can be interconverted in response to pressure, temperature, and solvent vapors. Powder X-ray diffraction indicates that in both polymorph, molecules adopt a lamellar packing, the different interlayer spacing being the main difference between the two structures. Single-crystal analysis of one of the polymorphs allows us to identify weak interaction planes, which presumably facilitates the polymorphic transformation through mechanically or thermally induced sliding processes. The polymorphic transformation and the origin of the switchable fluorescence have been rationalized through a spectroscopic and theoretical study. This study suggests that the different colors observed are due to different intermolecular aromatic interactions owing to the displacement of the molecules with respect to the layer normal. Interestingly, blending this molecule with a biodegradable polymer such as poly(vinyl alcohol) gives rise to a thermally activated reversible switchable fluorescent system, which entitles this material as an attractive candidate for technological applications, such as thermal sensors, security inks, or rewritable paper.

Mixed crystal formation of two gold isocyanide complexes with various ratios for continuous tuning of photophysical properties

Mixed crystals composed of two distinct gold isocyanide complexes are reported. Characterization of the mixed crystal formation and mixing ratios are performed by single-crystal X-ray diffraction and nuclear magnetic resonance spectroscopy analyses. By changing the mixing ratio, we achieve continuous changes in the emission lifetimes and the emission quantum yields.

Aurophilicity-Mediated Construction of Emissive Porous Molecular Crystals as Versatile Hosts for Liquid and Solid Guests

The first examples of porous molecular crystals that are assembled through Au⋅⋅⋅Au interactions of gold complex 1 are here reported along with their exchange properties with respect to their guest components. Single-crystal X-ray diffraction (XRD) analyses indicate that the crystal structure of 1/CH₂ Cl₂ ⋅pentane is based on cyclic hexamers of 1, which are formed through six Au⋅⋅⋅Au interactions. The packing of these cyclic hexamers affords a porous architecture, in which the one-dimensional channel segment contains CH₂ Cl₂ and pentane as guests. These guests can be exchanged through operationally simple methods under retention of the host framework of 1, which furnished 1/guest complexes with 26 different guests. A single-crystal XRD analysis of 1/eicosane, which contains the long linear alkane eicosane (n-C₂₀ H₄₂ ), successfully provided its accurately modeled structure within the porous material. These host-guest complexes show chromic luminescence with both blue- and redshifted emissions. Moreover, this porous organometallic material can exhibit luminescent mechanochromism through release of guests.

Shape Rememorization of an Organosuperelastic Crystal through Superelasticity-Ferroelasticity Interconversion

As altering permanent shapes without loss of material function is of practical importance for material molding, especially for elastic materials, shape-rememorization ability would enhance the utility of elastic crystalline materials. Since diffusionless plastic deformability can preserve the crystallinity of materials, the interconversion of diffusionless mechanical deformability between superelasticity and ferroelasticity could enable shape rememorization of superelastic single crystals. This study demonstrates the shape rememorization of an organosuperelastic single crystal of 1,4-dicyanobenzene through time-reversible interconversion of superelasticity-ferroelasticity relaxation by holding the mechanically twinned crystal without heating. The shape-rememorization ability of the organosuperelastic crystal indicates the compatibility of superelasticity (antiferroelasticity) and ferroelasticity as well as the intrinsic workability of organic crystalline materials capable of recovering their crystal functions under mild conditions.

Luminescent mechanochromism of gold N-heterocyclic carbene complexes with hypso- and bathochromic spectral shifts

Two gold N-heterocyclic carbene complexes show contrasting luminescent mechanochromism behavior with hypso- and bathochromic spectral shifts. The distinct emission shifts upon mechanical stimulation can be explained by the aggregate-to-monomer transformation and intensified intermolecular interactions, respectively.

Directed Polymorphism and Mechanofluorochromism of Conjugated Materials through Weak Non-Covalent Control

Understanding and manipulating crystal polymorphism can provide novel strategies for materials discovery in organic optoelectronics. In this paper, a series of seven ester-terminated three-ring phenylene ethynylenes (PEs) exhibit structure-dependent polymorphism wherein alkyl chain length modulates the propensity to form violet or green fluorescent solid phases, as well as tunable thermal and mechanofluorochromic (MFC) transitions. These compounds harness "soft" non-covalent control to achieve polymorphism: the electronic substituent effect of the ester groups weakens the fluoroarene-arene (ArF-ArH) interactions that typically direct crystal packing of this class of compounds, increasing competitiveness of other interactions. Small structural modifications tip this balance and shift the prevalence of violet- or green-emitting polymorphs. Compounds with short alkyl chain lengths show both violet and various green fluorescent polymorphs, while the violet fluorescent form dominates with alkyl lengths longer than butyl. Further, thermally induced green-to-violet fluorescent crystal-to-crystal transitions occur for single crystals of CO2-1 and CO2-3. Finally, the PEs show reversible violet-to-green mechanofluorochromism (MFC), with temperature required for reversion of this MFC decreasing with alkyl chain length. We therefore present this design of directional but weak interactions as a strategy to access polymorphs and tunable stimuli-responsive behavior in solids.

Reversible Aggregation of Chlorophyll Derivative Induced by Phase Transition of Lipid

Controlling the supramolecular organization of pigment molecules will provide innovative materials that exhibit variable optical properties. In nature, photosynthetic systems employ chlorophyllous supramolecules in which each pigment molecule is suitably organized in proteins, and their properties are adequately optimized by changing the structures of the surrounding amino acid residues. Here, we report a strategy for varying the aggregation behavior of a chlorophyll derivative by using a phase-transition phenomenon of lipid bilayers. Methyl pyropheophorbide a (MPP) was employed as a chlorophyllous pigment in our artificial system, and synthetic phosphatidylcholines with saturated acyl chain(s) were also used. The MPP molecules successfully accumulated within the lipid bilayer of liposomes without changing the vesicular structure. When the lipid bilayer was in a gel form (under the phase-transition temperature, T_m), the embedded MPP aggregated to yield a dimeric form showing red-shifted absorption bands and circular dichroism signals. When the solutions of MPP-containing liposomes were heated to higher temperatures than their T_m, MPP disaggregated to monomeric form as the absorption spectrum changed into its original fashion in dichloromethane. The reversible thermochromic (dis)aggregation of the MPP molecules had good cyclability. Additional careful examination of the phase transition in the MPP-lipid co-assemblies clarified that the critical temperatures of the MPP (dis)aggregation were in good agreement with the phase-transition temperatures of the pigment-containing bilayers. The reversible MPP aggregation in the lipid bilayers occurred in a wide range of temperatures (around 10-55 °C) by changing the length of the diacyl side chains of phospholipids. The reversible thermochromism of the chlorophyllous system was established by varying the nature of the surrounding lipid bilayer. This study can provide a useful strategy for making variable tetrapyrrolic aggregate systems induced by mild extrinsic stimuli.

Soft Crystals: Flexible Response Systems with High Structural Order

A new material concept of soft crystals is proposed. Soft crystals respond to gentle stimuli such as vapor exposure and rubbing but maintain their structural order and exhibit remarkable visual changes in their shape, color, and luminescence. Various interesting examples of soft crystals are introduced in the article. By exploring the interesting formation and phase-transition phenomena of soft crystals through interdisciplinary collaboration, new materials having both the characteristics of ordered hard crystals and those of flexible soft matter are expected.

Drastic rearrangement of self-assembled hydrogen-bonded tapes in a molecular crystal

A 2 : 1 hydrogen-bonded crystal of 2-pyrrolidone and chloranilic acid shows structural phase transitions accompanied by the drastic rearrangement of hydrogen-bonded tapes. Such a phenomenon is attributed to the selective and directional character of hydrogen bonds.

Utilization of a Nonemissive Triphosphine Ligand to Construct a Luminescent Gold(I)-Box That Undergoes Mechanochromic Collapse into a Helical Complex

Luminescent gold(I) complexes ([Au₆(Triphos)₄Cl](PF₆)₅·2(CH₃C₆H₅), [Au₆(Triphos)₄Cl](AsF₆)₅·8(CH₃C₆H₅), and [Au₆(Triphos)₄Cl](SbF₆)₅·7(CH₃C₆H₅) where Triphos = bis(2-diphenylphosphinoethyl)phenylphosphine) with a boxlike architecture have been prepared and crystallographically characterized. A chloride ion resides at the center of the box with two of the six gold(I) ions nearby. Mechanical grinding of blue luminescent crystals containing the cation, [Au₆(Triphos)₄Cl]⁵⁺, results in their conversion into amorphous solids with green emission that contain the bridged helicate cation, [μ-Cl{Au₃(Triphos)₂}₂]⁵⁺. A mechanism of the mechanochromic transformation is proposed. The structures of the blue-emitting helicate, [Au₃(Triphos)₂](CF₃SO₃)₃·4(CH₃C₆H₅)·H₂O, and the green-emitting bridged-helicate, [μ-Cl{Au₃(Triphos)₂}₂](PF₆)₅·3CH₃OH have been determined by single crystal X-ray diffraction.

Compression of a Flapping Mechanophore Accompanied by Thermal Void Collapse in a Crystalline Phase

Mechanical control of the molecular energy landscape is an important issue in modern materials science. Mechanophores play a unique role in that the mechanical responses are induced against the activation barrier for intramolecular transformation with the aid of external forces. Here we report an unprecedented activation process of a flexible flapping mechanophore. Namely, thermal void collapse in a crystalline phase triggers mechanophore compression in a definite proportion. Unfavored conformational planarization of the flapping mechanophore is compulsorily induced by packing force, leading to a total energy gain in crystal packing. Fluorescence chromism indicates extended π conjugation resulting from the mechanophore compression, giving rise to an energy transfer from the unpressed to compressed conformers.

A gold isocyanide complex with a pendant carboxy group: orthogonal molecular arrangements and hypsochromically shifted luminescent mechanochromism

The epistatic double hydrogen bonds that arise from the presence of a pendant carboxy group in a gold isocyanide complex result in strong aurophilic interactions in a magenta-emitting polymorph.

Correlating thermochromic and mechanochromic phosphorescence with polymorphs of a complex gold(i) double salt with infinite aurophilicity

Something learnt from a golden trio: polymorphs of a [Au(NHC)₂][Au(CN)₂] double salt allow an understanding of the thermochromic and mechanochromic phosphorescence of the gold(i) complexes with extended aurophilicity.