Host-Guest Binding-Site-Tunable Self-Assembly of Stimuli-Responsive Supramolecular Polymers

Dynamic nanosurface reconfiguration by host-guest supramolecular interactions

The dynamic functionalization of the nanoparticle surface with biocompatible coatings is a critical step towards the development of functional nano-sized systems. While covalent approaches have been broadly exploited in the stabilization of nanoparticle colloidal systems, these strategies hinder the dynamic nanosurface chemical reconfiguration. Supramolecular strategies based on specific host-guest interactions hold promise due to their intrinsic reversibility, self-healing capabilities and modularity. Host/guest couples have recently been implemented in nanoparticle platforms for the exchange and release of effector molecules. However, the direct exchange of biocompatible hydrophilic oligomers (e.g. peptides) for the modulation of the surface charge and chemical properties of nanoparticles still remains a challenge. Here, we show the intracellular reconfiguration of nanoparticles by a host/guest mechanism with biocompatible oligomeric competitors. The surface of gold nanoparticles was functionalized with cyclodextrin hosts and the guest exchange was studied with biocompatible mono and divalent adamantyl competitors. The systematic characterization of the size and surface potential of the host/guest nanoparticles allowed the optimization of the binding and the stabilization properties of these supramolecular systems. The in cellulo host/guest-mediated direct reconfiguration of the peptide layer at the surface of nanoparticles is achieved by controlling the valence of adamantane-equipped peptides. This work demonstrates that host/guest supramolecular systems can be exploited for the direct exchange of pendants at the surface of nanoparticles and the intracellular dynamic chemical reconfiguration of biocompatible colloidal systems.

Wholly Visible-Light-Responsive Host-Guest Supramolecular Gels Based on Methoxy Azobenzene and β-Cyclodextrin Dimers

Much attention has been paid to construct photoresponsive host-guest supramolecular gels; however, red-shifting the responsive wavelength remains a formidable challenge. Here, a wholly visible-light-responsive supramolecular gel was fabricated through the host-guest interaction between a β-cyclodextrin (β-CD) dimer and a tetra-ortho-methoxy-substituted azobenzene (mAzo) dimer (binary gelator) in DMSO/H₂O (V/V = 8/2). The minimum gelation concentration of the low-molecular-weight binary gelator was 6 wt % measured via the tube inversion method. The substituted methoxy groups shifted the responsive wavelengths of trans-mAzo and cis-mAzo to the green and blue light regions, respectively. The host-guest interaction between mAzo and β-CD as the driving force for gelation was confirmed using the ¹H-NMR and 2D ¹H NOESY spectra. The supramolecular gel showed good self-supporting ability with a storage modulus higher than 10⁴ Pa. The release of Rhodamine B loaded in the gel as a model drug could be controlled by green light irradiation. We envisioned the potential applications of the wholly visible-light-responsive supramolecular compounds ranging from biomedical materials to smart materials.

A dual drug-based hyperbranched polymer with methotrexate and chlorambucil moieties for synergistic cancer chemotherapy

Dual drug-based hyperbranched polymer micelles simultaneously containing methotrexate and chlorambucil were constructed for synergistic cancer chemotherapy.

Modular Fabrication of Intelligent Material-Tissue Interfaces for Bioinspired and Biomimetic Devices

One of the goals of biomaterials science is to reverse engineer aspects of human and nonhuman physiology. Similar to the body's regulatory mechanisms, such devices must transduce changes in the physiological environment or the presence of an external stimulus into a detectable or therapeutic response. This review is a comprehensive evaluation and critical analysis of the design and fabrication of environmentally responsive cell-material constructs for bioinspired machinery and biomimetic devices. In a bottom-up analysis, we begin by reviewing fundamental principles that explain materials' responses to chemical gradients, biomarkers, electromagnetic fields, light, and temperature. Strategies for fabricating highly ordered assemblies of material components at the nano to macro-scales via directed assembly, lithography, 3D printing and 4D printing are also presented. We conclude with an account of contemporary material-tissue interfaces within bioinspired and biomimetic devices for peptide delivery, cancer theranostics, biomonitoring, neuroprosthetics, soft robotics, and biological machines.

Boosting the circularly polarized luminescence of small organic molecules via multi-dimensional morphology control

By regulating the composition of solvents, the assembled nanostructures of chiral molecules transformed from 0D nanospheres to 3D nanoflakes, which showed significantly amplified circularly polarized luminescence.

Achieving a higher dissymmetry factor is a crucial issue in developing circularly polarized luminescence (CPL) materials. Here, by tailoring the solvent composition and the morphology of the same chiral emissive small molecules (R- or S-SPAn), circularly polarized emission with a boosted dissymmetry factor (two orders) was realized. It was found that by regulating the water fraction in the mixed THF/H₂O, we were able to achieve kinetic control over association of chiral emissive R- or S-SPAn into various nanostructures with 0D nanospheres, 2D nanoflakes and 3D stacked nanoflakes. These nanostructures are all CPL active. Remarkably, the dissymmetry factors of the nanostructures were significantly enhanced compared to those of the molecules and further boosted in different morphologies, from ∼10^–4 (0D nanospheres) to 10^–3 (2D flake) to ∼10^–2 (3D nanoflakes). The enlarged g_lum value could be assigned to a good packing induced strong luminescence of an excimer. This strategy provides an efficient way to fabricate higher dissymmetry factor CPL organic nanomaterials by only changing the supramolecular architectures while using the same chiral small molecules.

Homo- and hetero-difunctionalized β-cyclodextrins: Short direct synthesis in gram scale and analysis of regiochemistry

The regioselective difunctionalization of cyclodextrins (CDs) leading to derivatives amenable to further transformations is a daunting task due to challenging purification and unambiguous characterization of the obtained regioisomers with similar physicochemical properties. The primary-side homo-difunctionalization of β-CD can lead to three regioisomers, while the hetero-difunctionalization can generate three pairs of pseudoenantiomers. Previously, approaches with several synthetic steps, expensive reagents, high purification demands and low yields of the products have been employed. Herein we present direct, short and efficient primary-side difunctionalization strategies featuring reproducibility, ease of product purification, scalability of the reactions and versatility of the substituents introduced. Specifically, the prepared ditosylated β-CDs were separated using preparative reversed-phase column chromatography and their structures were elucidated by NMR experiments. Azidation led to the corresponding pure diazido regioisomers. Direct monotosylation of 6-monoazido-β-CD or monoazidation of the single regioisomers 6^A,6^X-ditosyl-β-CDs afforded hetero-difunctionalized 6^A-monoazido-6^X-tosyl-β-CDs in significant yields. Overall, the single regioisomers, 6^A,6^X-ditosyl-, 6^A,6^X-diazido- and 6^A-monoazido-6^X-monotosyl-β-CD were prepared in one or two steps and purified in multigram scale thus opening the way towards further selective and orthogonal functionalizations of β-CD hosts.

Azobenzene Molecular Machine: Light-Induced Wringing Gel Fabricated from Asymmetric Macrogelator

To develop light-triggered wringing gels, an asymmetric macrogelator (1AZ3BP) was newly synthesized by the chemically bridging a photoisomerizable azobenzene (1AZ) molecular machine and a biphenyl-based (3BP) dendron with a 1,4-phenylenediformamide connector. 1AZ3BP was self-assembled into a layered superstructure in the bulk state, but 1AZ3BP formed a three-dimensional (3D) network organogel in solution. Upon irradiating UV light onto the 3D network organogel, the solvent of the organogel was squeezed and the 3D network was converted to the layered morphology. It was realized that the metastable 3D network organogels were fabricated mainly due to the nanophase separation in solution. UV isomerization of 1AZ3BP provided sufficient molecular mobility to form strong hydrogen bonds for the construction of the stable layered superstructure. The light-triggered wringing gels can be smartly applied in remote-controlled generators, liquid storages, and sensors.

Photo/pH-controlled host-guest interaction between an azobenzene-containing block copolymer and water-soluble pillar[6]arene as a strategy to construct the "compound vesicles" for controlled drug delivery

Herein, dual stimuli-responsive compound vesicles were constructed based on host-guest interaction between a water-soluble pillar[6]arene (WP6) and an amphiphilic azobenzene-containing block copolymers (BCP). Reversible morphological transformation between compound vesicles and solid aggregates was achieved by repeated pH- and photo-stimuli. These compound vesicles were then applied in the controlled release of water-soluble anticancer drug, doxorubicin hydrochloride (DOX · HCl). Upon external stimuli, the DOX · HCl displayed a faster release rate than that without stimuli. Moreover, the compound vesicles showed an excellent cytocompatibility toward the human breast cancer cells (Michigan Cancer Foundation-7, MCF-7), and the drug-loaded compound vesicles exhibited lower cytotoxicity than free drug. The drug-loaded compound vesicles could be taken up by MCF-7 cells and can release the DOX · HCl in cancer cells due to the acid environment, which was important for applications in the therapy of cancers as a controlled-release drug carrier.

Fabrication of POSS-embedded supramolecular hyperbranched polymers with multi-responsive morphology transitions

We demonstrate a simple approach to prepare POSS-embedded supramolecular hyperbranched polymers with multiple stimulus morphology transitions driven by triple supramolecular driving forces in selective solvents.

Construction of [2]rotaxane-based supramolecular polymers driven by wheel-stopper π⋯π interactions

A new strategy for supramolecular polymerization is designed and presented, which is based on the wheel-stopper charge-transfer interactions of [2]rotaxanes.

Nanotrumpets and circularly polarized luminescent nanotwists hierarchically self-assembled from an achiralC3-symmetric ester

An achiralC₃-symmetric molecule was found to self-assemble into various hierarchical nanostructures such as nanotwists, nanotrumpets and nanobelts, in which the twisted fibers showed supramolecular chirality as well as circularly polarized luminescence although the compound is achiral.

Using Host-Guest Chemistry to Tune the Kinetics of Morphological Transitions Undertaken by Block Copolymer Vesicles

Host-guest chemistry is exploited to tune the rate at which block copolymer vesicles undergo morphological transitions. More specifically, a concentrated aqueous dispersion of poly(glycerol monomethacrylate-co-glycidyl methacrylate)-poly(2-hydroxypropyl methacrylate) [P(GMA-co-GlyMA)-PHPMA] diblock copolymer vesicles was prepared via polymerization-induced self-assembly (PISA). The epoxy groups in the GlyMA residues were ring-opened using a primary amine-functionalized β-cyclodextrin (NH₂-β-CD) in order to prepare β-CD-decorated vesicles. Addition of azobenzene-methoxypoly(ethylene glycol) (azo-mPEG) to such vesicles results in specific binding of this water-soluble macromolecular reagent to the β-CD groups on the hydrophilic P(GMA-co-GlyMA) stabilizer chains. Such host-guest chemistry induces a morphological transition from vesicles to worms and/or spheres. Furthermore, the rate of this morphological transition can be tuned by UV/visible-light irradiation and/or guest molecule competition. This novel molecular recognition strategy offers considerable scope for the design of new stimulus-responsive diblock copolymer vesicles for targeted delivery and controlled release of cargoes.

Thermoresponsive cyclodextrins with benzenesulfonamide showing tunable inhibition for carbonic anhydrase

Monodisperse thermoresponsive cyclodextrins appended with benzenesulfonamides were demonstrated to reversibly regulate the enzymatic activity of carbonic anhydrase, which was found to be dependent on both scaffold effect and thermoresponsiveness.

Supramolecular Host-Guest Interaction-Enhanced Adjustable Drug Release Based on β-Cyclodextrin-Functionalized Thermoresponsive Porous Polymer Films

Drug delivery systems based on stimuli-responsive porous polymer films (PPFs) have been extensively investigated because of their many advantages. However, the ability to adjust the drug release from PPFs is not always perfect, and at times, it cannot satisfy real-world requirements. In this paper, supramolecular host-guest interactions were harnessed to overcome the difficulties associated with adjustable release from these systems by incorporating host molecules into the pore walls of thermoresponsive PPFs. β-Cyclodextrin-functionalized porous amphiphilic block copolymer films (β-CD-PBCPFs) with controllable pore parameters, high homogeneity, and large areas were prepared by combining the self-assembly and breath-figure methods. Drug-loaded β-CD-PBCPFs displayed thermoresponsive release behavior, which could be tuned by increasing the β-CD content in phosphate-buffered saline. The release was governed by the host-guest interactions of the β-CD moieties and drug molecules. The concept of host-guest interaction-enhanced adjustable release could be applied to different drug molecules, such as doxorubicin and metronidazole.

Supramolecular hyperbranched polymers

This feature article presents a systematic summary of the synthesis strategies including direct and indirect approaches for obtaining supramolecular hyperbranched polymers (SHPs).

A reusable supramolecular platform for the specific capture and release of proteins and bacteria

A re-usable supramolecular platform with the capability of high-efficiency capture and on-demand release of specific proteins and bacteria was developed.