Understanding the Oxidative Addition of σ-Bonds to Group 13 Compounds

A Deeper Insight into the Supramolecular Activation of Oxidative Addition Reactions Involving Pincer-Rhodium(I) Complexes

The factors governing the acceleration of the oxidative addition of methyl iodide to pincer rhodium(I)-complexes induced by coronene have been computationally explored in detail using quantum chemical methods. Both the parent reaction and the coronene-mediated process proceed via a stepwise SN2-type mechanism. It is found that the acceleration of the process derives from the formation of an initial supramolecular complex, mainly stabilized by electrostatic and π-π interactions, which significantly increases the electron richness of the complex. The impact of this effect on the reaction barrier has been quantitatively analyzed by applying the activation strain model in combination with the energy decomposition analysis method. In addition, the influence of other polycyclic aromatic hydrocarbons on the oxidative reaction has been also considered.

Understanding the Reaction Mechanism of Ni-Catalyzed Regio- and Enantioselective Hydroalkylation of Enamines: Chemoselectivity of (Bi-oxazoline)NiH

This density functional theory study explores the detailed mechanism of nickel-catalyzed hydroalkylation of the C═C bond of N-Cbz-protected enamines (Cbz = benzyloxycarbonyl) with alkyl iodides to give chiral α-alkyl amines. The active catalyst (biOx)NiH, a chiral bioxazoline (biOx)-chelated Ni(I) hydride, exhibits chemoselectivity that favors single electron transfer to the alkyl iodide over C═C hydrometalation with the enamine. This generates an alkyl radical and a Ni(II) intermediate, which takes up the enamine substrate CbzNHCH═CH2CH3 via a regio- and enantioselective C═C insertion into the NiII-H bond. The resulting Ni(II) alkyl complex combines with the alkyl radical, forming a Ni(III) intermediate, from which the alkyl-alkyl reductive elimination delivers the chiral amine product. The regioselectivity arises from a combination of orbital and noncovalent interactions, both of which are induced by the Cbz group. Thus, Cbz plays an additional role in controlling regioselectivity. The enantioselectivity stems from the differing distortion energies of CbzNHCH═CH2CH3. The reductive elimination is the rate-determining step (ΔG⧧ = 18.7 kcal/mol). In addition, the calculations show a noninnocent behavior of the biOx ligand induced by the insertion of CbzNHCH═CH2CH3 into the Ni-H bond of (biOx)NiH. These computationally gained insights can have implications for developing new Ni(I)-catalyzed reactions.

Activation of the GaI Cation for Bond Activation: from Oxidative Additions into C-Cl and H-P Bonds to Reversible Insertion into P4

Although the discovery of the GaI complex salt [Ga(PhF)2-3 ][Al(ORF )4 ] (RF =C(CF3 )3 , PhF=C6 H5 F) invoked the preparation of a diverse library of cationic Ga(I) coordination complexes and clusters, studies on small molecule activation with low-valent GaI cations are scarce. Herein, a first experimental study on the reactivity of a monomeric Ga(I) cation activated with a pyridine-diimine pincer ligand (in [Ga(PDIdipp )][Al(ORF )4 ]) towards small-molecules is reported. First controlled oxidative additions of the GaI cation into C-Cl, H-P and P-P bonds are presented. Moreover, the [4+1]cycloaddition to butadienes was achieved. Intriguingly, the isolated, blue insertion product into the P-P bond of P4 allows for the quantitative release of the P4 molecule upon reaction with AlEt3 and butadienes. Reversible P4 insertion of main-group metals has previously been reported for Ge and Sn, respectively. The experimental study is supported by high-level computational analysis of the in-part reversible oxidative additions at the DLPNO-CCSD(T)/def2-TZVPP//PBEh-3c/def2-mSVP level of theory with COSMO-RS solvation in 1,2-difluorobenzene.

Factors Controlling the Aluminum(I)-meta-Selective C-H Activation in Arenes

The so far poorly understood factors controlling the complete meta-selectivity observed in the C-H activation reactions of alkylarenes promoted by aluminyl anions have been explored in detail by means of Density Functional Theory calculations. To this end, a combination of state-of-the-art computational methods, namely the activation strain model of reactivity and energy decomposition analysis, has been applied to quantitatively unveil the origin of the selectivity of the transformation as well as the influence of the associated potassium cation. It is found that the selectivity takes place during the initial nucleophilic addition step where the key LP(Al)→π*(C=C) molecular orbital interaction is more stabilizing for the meta-pathway, which results in a stronger interaction between the reactants along the entire transformation.

Rationalizing the AlI -Promoted Oxidative Addition of C-C Versus C-H Bonds in Arenes

The factors controlling the oxidative addition of C-C and C-H bonds in arenes mediated by Al^I have been computationally explored by means of Density Functional Theory calculations. To this end, we compared the processes involving benzene, naphthalene and anthracene which are promoted by a recently prepared anionic Al^I -carbenoid. It is found that this species exhibits a strong tendency to oxidatively activate C-H bonds over C-C bonds, with the notable exception of benzene, where the C-C bond activation is feasible but only under kinetic control reaction conditions. State-of-the-art computational methods based on the combination of the Activation Strain Model of reactivity and the Energy Decomposition Analysis have been used to rationalize the competition between both bond activation reactions as well as to quantitatively analyze in detail the ultimate factors controlling these transformations.

The unique β-diketiminate ligand in aluminum(i) and gallium(i) chemistry

Herein we present an overview of the last 10 years for aluminum(i) and gallium(i) stabilized by β-diketiminate ligands that undergo a series of oxidative addition reactions with molecules containing single and multiple bonds.

Salt metathesis as an alternative approach to access aluminium(i) and gallium(i) β-diketiminates

Aluminium(i) and gallium(i) β-diketiminates are accessed by a new route that provides better overall yields. In the case of aluminium it is also much faster, but some molecules turn into a dead end and merge into a dinuclear aluminium(iii) hydride.

Facile oxidative addition of O2 and S8 by an indium bis(carbene) analogue

The oxidative addition of oxygen towards an indium bis(carbenoid) yields an almost planar In₄O₂ ring, an isovalence-electronic analogue of dioxane, in which the indium is in the formal oxidation state +ii. The weaker oxidant sulfur, however, yields an eight-membered ring in a deck-chair conformation containing four indium(iii) centres and four sulfides in an alternating fashion. According to DFT calculations, this reactivity difference originates from kinetic rather than thermodynamic reasons. When the reaction with S₈ is performed with the in situ generated bis(carbenoid), a β-diketimine (NacNac) incorporating an S₄-chain bridging the two γ-carbon atoms of each NacNac unit is derived.

Can the solvent enhance the rate of chemical reactions through C-H/π interactions? insights from theory

The current computational study with density functional theory (DFT) shows that the rate of chemical reactions can be influenced through non-covalent C-H/π interactions between substrates and the solvent. It is shown that intramolecular carbon-carbon interaction and CO2 activation by a low valent silicon complex are both favourably affected by the explicit presence of the solvent toluene, due to C-H/π interactions between toluene and the silicon complex. Furthermore, ab initio molecular dynamics (AIMD) simulations demonstrate that even if the C-H/π interacting solvent molecule is displaced from the complex, another would quickly take its place, thus maintaining the interaction. Hence, the current work shows how non-covalent interactions between solvent and substrate can enhance the rate of the reaction and expands our understanding of the role and influence of the solvent in effecting important chemical transformations.

Reversible alkene binding and allylic C-H activation with an aluminium(i) complex

The monomeric molecular aluminium(i) complex 1 [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl) reacts with a series of terminal and strained alkenes including ethylene, propylene, allylbenzene and norbornene to form alkene bound products.

The monomeric molecular aluminium(i) complex 1 [{(ArNCMe)₂CH}Al] (Ar = 2,6-di-iso-propylphenyl) reacts with a series of terminal and strained alkenes including ethylene, propylene, allylbenzene and norbornene to form alkene bound products. Remarkably all these reactions are reversible under mild conditions (298–353 K) with alkene binding being disfavoured at higher temperatures due to the positive reaction entropy. Van't Hoff analyses have allowed quantification of the binding events with . Calculations and single crystal X-ray diffraction studies are consistent with the alkene bound species being metallocyclopropane complexes. Alkene binding involves a reversible redox process with changes from the +1 to +3 aluminium oxidation state. Under more forcing conditions the metallocyclopropane complexes undergo non-reversible allylic C–H bond activation to generate aluminium(iii) allyl hydride complexes. This represents a rare example of redox-based main group reactivity in which reversible substrate binding is followed by a further productive bond breaking event. Analysis of the mechanism reveals a reaction network in which alkene dissociation and reformation of 1 is required for allylic C–H activation, a realisation that has important implications for the long-term goal of developing redox-based catalytic cycles with main group compounds.

Evidence for single metal two electron oxidative addition and reductive elimination at uranium

Reversible single-metal two-electron oxidative addition and reductive elimination are common fundamental reactions for transition metals that underpin major catalytic transformations. However, these reactions have never been observed together in the f-block because these metals exhibit irreversible one- or multi-electron oxidation or reduction reactions. Here we report that azobenzene oxidises sterically and electronically unsaturated uranium(III) complexes to afford a uranium(V)-imido complex in a reaction that satisfies all criteria of a single-metal two-electron oxidative addition. Thermolysis of this complex promotes extrusion of azobenzene, where H-/D-isotopic labelling finds no isotopomer cross-over and the non-reactivity of a nitrene-trap suggests that nitrenes are not generated and thus a reductive elimination has occurred. Though not optimally balanced in this case, this work presents evidence that classical d-block redox chemistry can be performed reversibly by f-block metals, and that uranium can thus mimic elementary transition metal reactivity, which may lead to the discovery of new f-block catalysis.

The Unusual Role of Aromatic Solvent in Single-Site AluminumI Chemistry: Insights from Theory

The single-site activation of strong σ bonds (such as that of H-H, P-H, and N-H) remains a significant challenge in main-group chemistry, with only a few cases reported to date. In this regard, recent exciting experiments performed with aluminum^I complexes hold significance because they have been seen to activate a variety of strong σ bonds. Such chemistry is generally seen to occur in aromatic solvents. Current computational studies with DFT reveal the interesting reason for this: an explicit aromatic solvent molecule acts as a catalyst by converting the aluminum^I complex into aluminum^III during the process. Different cases of σ-bond activation by aluminum^I complexes have been investigated and the efficiency of H-X (X=H, NHtBu, PPh₂ ) bond activation in the presence of an explicit benzene solvent molecule is orders of magnitude higher than that in its absence. The current work therefore reveals the chemistry of aluminum^I complexes to be richer and more complex than that previously realized, and shows it to be dependent on metal-solvent cooperativity; the first known example of its kind in main-group chemistry.

Aluminum(i) β-diketiminato complexes activate C(sp2)-F and C(sp3)-F bonds by different oxidative addition mechanisms: a DFT study

DFT computations reveal different reaction mechanisms for the oxidative addition of C(sp²)-F and C(sp³)-F bonds to the Al(i) complexes: a concerted mechanism for C(sp²)-F and a stepwise mechanism for C(sp³)-F involving fluoride transfer and the formation and recombination of an ion pair.