Photochromic Terbium Phosphonates with Photomodulated Luminescence and Metal Ion Sensitive Detection

Structural Landscape and Proton Conduction of Lanthanide 5-(Dihydroxyphosphoryl)isophthalates

Metal phosphonate-carboxylate compounds represent a promising class of materials for proton conduction applications. This study investigates the structural, thermal, and proton conduction properties of three groups of lanthanide-based compounds derived from 5-(dihydroxyphosphoryl)isophthalic acid (PiPhtA). The crystal structures, solved ab initio from X-ray powder diffraction data, reveal that groups Ln-I, Ln[O3P-C6H3(COO)(COOH)(H2O)2] (Ln = La, Pr), and Ln-II, Ln2{[O3P-C6H3(COO)(COOH)]2(H2O)4}·2H2O (Ln = La, Pr, Eu), exhibit three-dimensional frameworks, while group Ln-III, Ln[O3P-C6H3(COO)(COOH)(H2O)] (Ln = Yb), adopts a layered structure with unbonded carboxylic groups oriented toward the interlayer region. All compounds feature carboxylic groups and coordinating water molecules. Impedance measurements demonstrate that these materials exhibit water-mediated proton conductivity, initially following a vehicle-type proton-transfer mechanism. Upon exposure to ammonia vapors from a 14 or 28% aqueous solution, compounds from groups II and III adsorb ammonia and water, leading to an enhancement in proton conductivity consistent with a Grotthuss-type proton-transfer mechanism. Notably, group II of the studied compounds undergoes the formation of a new expanded phase through the internal reaction of carboxylic groups with ammonia, coexisting with the as-synthesized phase. This postsynthetic modification results in a significant increase in proton conductivity, from approximately ∼5 × 10-6 to ∼10-4 S·cm-1 at 80 °C and 95% relative humidity (RH), attributed to a mixed intrinsic/extrinsic contribution. Remarkably, the NH3(28%)-exposed Yb-III compound achieves an enhancement in proton conductivity, reaching ∼ 5 × 10-3 S·cm-1 at 80 °C and 95% RH, primarily through an extrinsic contribution.

Colorimetric detection of Fe2+ and Cr2O72- in environmental water samples based on dual-emitting RhB-embedded Zr-MOFs

Three dye-loaded tunable dual-emission colorimetric fluorescent probes RhB@UiO-66-Ph (R@U-P) were prepared by in-situ encapsulation method under solvothermal conditions. The resonance energy transfer between UiO-66-Ph and RhB made the dual emission of R@U-P easily tunable with the embedded dye content changing. The R@U-P composites achieved emission from purple light to red light, and served as probes to realize comparative detection of Fe3+, Fe2+ and Cr2O72- in water through colorimetric or quenching detection mode. Mechanism study indicates that the resonance energy transfer or electron transfer interactions between R@U-P composites and inorganic ions resulted in the relative changes of the two emission peaks and realized the selective detection of analytes. The preparation and application of R@U-P probes provide a promising strategy for the in-situ encapsulation dye to obtain two dual-emission composites for the comparative detection of Fe3+, Fe2+ and Cr2O72- in water samples.

Photochromism and Photomagnetism in Two Ni(II) Complexes Based on a Photoactive 2,4,6-Tris-2-Pyridyl-1,3,5-Triazine Ligand

It is still challenging to construct novel photochromic and photomagnetic materials in the field of molecular materials. Herein, the 2,4,6-tris-2-pyridyl-1,3,5-triazine (TPTz) molecule was found to display photochromic properties under room temperature light irradiation. Two mononuclear structures, [Ni(H2O)(TPTz)(C2O4)]·2H2O (1; C2O42- = oxalate) [Ni(H2O)(TPTz)(C2O4)]·0.5H2O (2), and one chain compound [Ni(TPTz)(H2-HEDP)]·2H2O (3; HEDP = hydroxyethylidene diphosphonate) were obtained by assembling TPTz with polydentate O-ligands (oxalate and phosphonate) and the paramagnetic Ni2+ ions. The electron-transfer (ET)-dominated photochromism was observable in 1 and 2 after light irradiation with the photogeneration of relatively stable radicals, and the resultant photochromism was demonstrated via UV-vis, photoluminescence, X-ray photoelectron spectra, electron paramagnetic resonance spectra, and molecular orbital calculations. Due to the denser stacking interactions between the adjacent organic molecules, 2 exhibited a faster photochromic rate than 1. Compared with 1 and 2, compound 3 did not show photochromic behavior, which was deciphered by the theoretical calculations for all of the compounds. Importantly, the magnetic couplings appeared between photogenerated radicals and paramagnetic Ni2+ ions, resulting in a scarcely photomagnetic phenomenon of 1 and 2 in the Ni-based electron transfer photochromic materials. This work enriches the available kind of ligands for the design of ET photochromic materials, putting forward a method to tune the electron transfer photochromic efficiency in the molecular materials.

In situ ligand-induced Ln-MOFs based on a chromophore moiety: white light emission and turn-on detection of trace antibiotics

Series novel 3D Ln-MOFs containing both carboxyphenyl and pyridinyl moieties have been constructed. Tb-MOF fluorescence turn-on sensor of levofloxacin solution with highly sensitive and excellent selective was achieved through d-PET approach.

A multi-input/multi-output molecular system based on lanthanide(III) complexes

Developing multi-input/multi-output (MIMO) molecular systems for information processing is of great significance in the sophisticated human-made and natural processes. Herein, we present a novel design strategy of incorporating two azobenzene...

Photochromism and photomagnetism in three cyano-bridged 3d-4f heterobimetallic viologen frameworks

The incorporation of photochromic moieties into coordination polymers is of particular interest because it can endow them with various switching functions such as electrical conductivity, luminescence, and magnetism. In this context, a viologen ligand as a photochromic moiety was incorporated into 3d-4f heterobimetallic hexacyanoferrates, resulting in three novel 3-D photochromic complexes with different metal cations, namely {[Ln(BCEbpy) M(CN)₆ (H₂O)₄]·2H₂O}_n (denoted as CoDy, CoEu, and FeDy, Ln = Dy, Eu; M = Fe, Co, H₂BCEbpy·2Br = N,N'-bis(carboxymethyl)-4,4'-bipyridinium dibromide). And the photoresponsive mechanism has been well discussed based on the solid UV-vis, IR, ESR, photoluminescence, and magnetism data. Moreover, accompanying the photochromic process, these unique complexes exhibit different photomagnetic behaviors upon UV-vis irradiation at RT because of the different ferromagnetic coupling interactions between photogenerated radicals and lanthanide cations.

Two Photochromic Complexes Assembled by a Nonphotochromic Ligand: Photogenerated Radical Enhanced Room-Temperature Phosphorescence

Stimulating tunable room-temperature phosphorescence (RTP) is still a challenge in photochromic systems, which is vital for multifunctional coordination materials. Herein, we synthesized two new photochromic chain complexes through self-assembly of the nonphotochromic 1,3,5-tris(4-pyridyl)benzene ligand, diphosphonate, and Ln(III) ions (1 for Ln(III) = Dy and 2 for Ln(III) = Gd). Both compounds showed fast photoresponses with the color turning from yellow to dark gray with a reversible decoloration by heating or storage in the dark. The electron transfer photochromic behavior with the generated stable radicals was further confirmed by the room-temperature UV-vis and electron paramagnetic resonance spectra. Furthermore, via tuning the generation and disappearance of stable radicals, reversible room-temperature fluorescence and phosphorescence for both compounds were switched by light irradiation and a thermal treatment, with an enhanced intensity for RTP and a decrease in fluorescence during the duration of Xe-lamp light irradiation. This work provides a new strategy that photogenerated radicals could promote and enhance RTP properties in functional materials.

The first 2,6-di(1,6-naphthyridin-2-yl)pyridine-based redox photochromic coordination polymer platform with selective vapochromism for trolamine

The first redox photochromic coordination polymer system with photosensitive 2,6-di(1,6-naphthyridin-2-yl)pyridine ligand has been developed, exhibiting stepwise photo- and vapochromism towards UV irradiation and amino-attached vapor fumigation.

A water-stable molecular cadmium phosphonate bearing 2-(2-pyridyl)benzimidazole as a highly sensitive luminescence sensor for the selective detection of bisphenol AF and bisphenol B

A highly water-stable molecular cadmium phosphonate bearing 2-(2-pyridyl)benzimidazole has been used as a sensor platform for the luminescence detection of bisphenol AF (BPAF) and bisphenol B (BPB) in water with good sensitivity and selectivity.

Three-component D-A hybrid heterostructures with enhanced photochromic, photomodulated luminescence and selective anion-sensing properties

As an emerging class of hybrid complexes, donor-acceptor (D-A) hybrid heterostructures with advantages of both photoactive organic and inorganic components have provided an excellent platform for the fabrication of multifunctional photoactive materials. In this context, we have demonstrated three novel host-guest D-A hybrid heterostructures, {[Ln(BCEbpy)(H₂O)₄][Co^III(CN)₆]·4H₂O}_n (1 (Eu), 2 (Dy), 3 (Sm)), based on the anionic Co(CN)₆^3- and cationic coordination layers assembled from a viologen functionalized tecton and Ln(NO)₃. Due to the introduction of an electron donor, Co^III(CN)₆^3-, the unique hybrid exhibits a highly sensitive and reversible photochromic transformation from light-yellow to brown upon UV-Vis irradiation. More interestingly, accompanied with this photochromic process, hybrid 1 simultaneously possesses a photomodulated fluorescence behaviour. In addition, hybrid 1 shows high sensitivity and selectivity towards Cr₂O₇^2- anions with a fairly small LOD of ca. 9.6 × 10^-6 M.

Manipulating On/Off Single-Molecule Magnet Behavior in a Dy(III)-Based Photochromic Complex

Exploitation of room temperature (RT) photochromism and photomagnetism to induce single-molecule magnet (SMM) behavior has potential applications toward optical switches and magnetic memories, and remains a tremendous challenge in the development of new bulk magnets. Herein, a series of chain complexes [Ln₃(H-HEDP)₃(H₂-HEDP)₃]·2H₃-TPT·H₄-HEDP·10H₂O (QDU-1; Ln = Dy (QDU-1(Dy)), Gd (QDU-1(Gd)), and Y (QDU-1(Y)); HEDP = hydroxyethylidene diphosphonate; TPT = 2,4,6-tri(4-pyridyl)-1,3,5-triazine) were synthesized by solvothermal reactions. All the compounds exhibited reversible photochromic and photomagnetic behaviors via UV light irradiation at RT, induced by the photogenerated radicals via a photoinduced electron transfer (PET) mechanism. More importantly, the PET process induced significant variations in magnetic interactions for the Dy(III) congener. Strong ferromagnetic coupling with remarkably slow magnetic relaxation without applied dc fields was observed between Dy^III ions and photogenerated O^• radicals, showing SMM behavior after RT illumination. For the first time, we observed the reversible RT photochromism and photomagnetism in the lanthanide-based materials. This work realized the radicals-actuated on/off SMM behavior via RT light irradiation, providing a new strategy for constructing the light-induced SMMs.

Photochromic inorganic–organic complex derived from low-cost deep eutectic solvents with tunable photocurrent responses and photocatalytic properties

A photochromic inorganic–organic complex |C₁₀H₁₀N₂|[GaF(C₂O₄)₂] derived from low-cost deep-eutectic solvents possesses tunable photocurrent responses and photocatalytic activities.

Lanthanide clusters as highly efficient catalysts regarding carbon dioxide activation

Lanthanide clusters display a wide substrate scope and high catalytic activity for the insertion of CO₂ into epoxides to form cyclic carbonates.

Series of Water-Stable Lanthanide Metal-Organic Frameworks Based on Carboxylic Acid Imidazolium Chloride: Tunable Luminescent Emission and Sensing

A series of isomorphic lanthanide metal-organic frameworks (Ln-MOFs), {[Ln(L)(H₂O)₂]·5H₂O}_n (1-Ln, where Ln = Eu, Tb, Gd, and Eu_xTb_1-x), have been synthesized by a rigid 1,3-bis(3,5-dicarboxyphenyl)imidazolium chloride (H₄L⁺Cl^-) ligand and Ln³⁺ ions via a solvothermal method. Single-crystal X-ray diffraction indicated that 1-Ln exhibited similar three-dimensional porous frameworks with one-dimensional channels decorated by the uncoordinated carboxylate oxygen atoms. The luminescent sensing studies indicated that 1-Eu is an outstanding reusable luminescent probe suitable for the simultaneous detection of Cr₂O₇^2-, CrO₄^2-, and MnO₄^- ions in an aqueous solution. Remarkably, the different proportions of Eu³⁺ and Tb³⁺ can be combined into the same Ln-MOF to yield a new series of differently doped 1-Eu_xTb_1-x MOFs. At the same excitation wavelength, they generated dual-emission peaks of Eu³⁺ and Tb³⁺ to show a gradual change in luminous color between yellow-green, yellow, orange, orange-red, and red. On the basis of the excellent optical properties of 1-Ln complexes, they can be employed as promising luminescent probe and multicolor tunable photoluminescence materials.

Photochromic Lanthanide(III) Materials with Ion Sensing Based on Pyridinium Tetrazolate Zwitterion

Lanthanide(III) ion (Ln(III)) sensing has become a major research area owing to its intriguing prospect in clinic, biology, and environmental studies. However, the existing methods have limitations like requirement of expensive instrumentation, long analytical times, and sample pretreatments, revealing the necessity of other methods. In this work, by using N-methyl-4-pyridinium tetrazolate (mptz) zwitterion as an electron acceptor, we obtained several new Ln(III) compounds with electron-transfer (ET) photochromic properties: [Ln(NO₃)₃(H₂O)₄]·mptz [Ln = Sm (1), Eu (2), Gd (3), La (4), Ce (5), Pr (6), Nd (7), Tb (8), Dy (9), Ho (10), Er (11), Tm (12), Yb (13), Lu (14)]. Notably, different Ln(III) ions in these compounds can be visually identified by their different photoinduced color changes related to the ET process. This work may not only contribute to the more understanding of the structure-photosensitivity relationships of pyridinium-based compounds, but also provide a new approach for Ln(III) ion sensing.

Two Highly Stable Luminescent Lead Phosphonates Based on Mixed Ligands: Highly Selective and Sensitive Sensing for Thymine Molecule and VO3 - Anion

Two luminescent lead phosphonates with two-dimensional (2D) layer and three-dimensional (3D) framework structure, namely, Pb₃[(L₁)₂(Hssc)(H₂O)₂] (1) and [Pb₂(L₂)_0.5(bts)(H₂O)₂]·H₂O (2) (H₂L₁ = O(CH₂CH₂)₂NCH₂PO₃H₂, H₄L₂ = H₂PO₃CH₂NH(C₂H₄)₂NHCH₂PO₃H₂, H₃ssc = 5-sulfosalicylic acid, NaH₂bts = 5-sulfoisophthalic acid sodium) have been prepared via hydrothermal techniques. The two compounds not only show excellent thermal stability but also remain intact in aqueous solution within an extensive pH range. Moreover, the atomic absorption spectroscopy analysis experiment indicates that there does not exist the leaching of Pb²⁺ ions from the lead phosphonates, which show they are nontoxic in aqueous solution. In compound 1, the Pb(1)O₄, Pb(2)O₇, Pb(3)O₄, and CPO₃ polyhedra are interlinked into a one-dimensional chain, which is further connected to adjacent chain by sharing the Hssc^2- to form a 2D layer. Interestingly, compound 1 as a highly selective and sensitive luminescent material can be used to detect the thymine molecule with a very low detection limit of 8.26 × 10^-7 M. In compound 2, the Pb(1)O₆ and Pb(2)O₅ polyhedra are interlinked into a dimer via edge sharing, which is further connected to adjacent dimer to form a tetramer via corner sharing, and such a tetramer is then interlinked into a 2D layer through bts^3- ligands; the adjacent 2D layers are finally constructed to a 3D structure by sharing the L₂ ^4- ligand. Compound 2 can be applied as an excellent luminescent sensor for sensing of VO₃ ^- anion. Furthermore, the probable fluorescent quenching mechanisms of the two compounds have also been studied.

Terbium Oxalatophosphonate as Efficient Multiresponsive Luminescent Sensors for Chromate Anions and Tryptophan Molecules

A stable 2D terbium oxalatophosphonate with green luminescence, namely, [Tb2(H3L)(C2O4)3(H2O)4]·2H2O (1), has been hydrothermally obtained by using (4-carboxypiperidyl)-N-methylenephosphonic acid (H3L) and oxalate ligand. The luminescent investigation indicates that the emission behavior of compound 1 shows high water and pH stabilities. It can be applied as a multiresponsive luminescent probe with high selectivity, high sensitivity, recycling capability, and fast sensing of CrO4 2-, Cr2O7 2- anions and tryptophan (Trp) molecules in aqueous solution through the luminescence quenching effect. Moreover, the sensing results can be distinguished by the naked eye under the irradiation of UV light of 254 nm. In addition, the probable mechanisms for the quenching behavior are also discussed, which can be mainly attributed to the competitive absorption of excitation energy between compound 1 and the analytes.

Hydrothermal assembly, structures, topologies, luminescence, and magnetism of a novel series of coordination polymers driven by a trifunctional nicotinic acid building block

In this work, a trifunctional N,O-building block, 5-(4-carboxyphenoxy)nicotinic acid (H₂cpna), that combines three distinct types of functional groups (COOH, N-pyridyl, and O-ether) was used for the hydrothermal assembly of thirteen new coordination compounds: [Co(μ₃-Hcpna)₂]_n (1), [Mn(μ₄-cpna)(H₂O)]_n (2), [Mn(μ₄-cpna)(H₂O)₂]_n (3), [Mn(μ-cpna)(2,2'-bipy)(H₂O)₂]_n (4), {[Ni(μ₃-cpna)(2,2'-bipy)(H₂O)]₂·H₂O}_n (5), {[Cd(μ₃-cpna)(2,2'-bipy)]·2H₂O}_n (6), [Zn₂(μ-cpna)₂(2,2'-bipy)₂] (7), [Cu(μ-cpna)(2,2'-bipy)(H₂O)]_n (8), {[Mn(μ-cpna)(phen)₂]·6H₂O}_n (9), {[Ni(μ₃-cpna)(phen)(H₂O)]·H₂O}_n (10), [Zn₂(μ-cpna)₂(phen)₂] (11), {[Pb(μ₃-cpna)(phen)]·H₂O}_n (12), and [Ni(μ₃-cpna)(4,4'-bipy)_0.5(H₂O)]_n (13). These products were synthesized from the corresponding metal(ii) chlorides, H₂cpna, NaOH, and optional N-donor supporting ligands or templates {bis(4-pyridyl)amine (bpa), 2,2'-bipyridine (2,2'-bipy), 4,4'-bipyridine (4,4'-bipy), or 1,10-phenanthroline (phen)}. Products 1-13 were characterized in the solid state by standard methods, including elemental and thermogravimetric analysis (TGA), IR spectroscopy, and powder (PXRD) and single-crystal X-ray diffraction. The structures of 1-13 feature distinct structural types, namely the 3D metal-organic frameworks (MOFs 1-3), the 2D coordination polymers (5, 6, 10, 12, and 13), the 1D coordination polymers (4, 8, and 9), and the 0D discrete cyclic dimers (7 and 11). Such a wide structural diversity of 1-13 is driven by various factors, including the type of the metal(ii) node, the deprotonation degree of H₂cpna, and/or the type of supporting ligand or template. Notably, an addition of bpa can tune the structure of MOF 3 by the template effect. Topological classification of underlying metal-organic networks was performed, leading to several distinct topological nets: rtl (in 1), hxg-d-4-C2/m (in 2), sra (in 3), 2C1 (in 4, 8 and 9), fes (in 5, 10, and 12), hcb (in 6), and 3,4L83 (in 13). The magnetic behavior of 1-5, 8-10, and 13 was studied and theoretically modeled, disclosing antiferromagnetic interactions. The luminescence behavior of 6, 7, 11, and 12 was also investigated.

Three Zn(ii)-based MOFs for luminescence sensing of Fe3+ and Cr2O72− ions

Three zinc metal–organic frameworks (MOFs) have been hydrothermally synthesized. We explored their applications in detecting ions, and the result shows that they all show highly selective sensing for Fe³⁺ and Cr₂O₇²⁻ ions.

Lanthanide oxalatophosphonates with two types of layered structures: syntheses, structures, luminescence and magnetic properties

Five novel lanthanide(iii) oxalatophosphonates with two types of 2D layered structures have been hydrothermally obtained and structurally characterized. The luminescence and magnetic properties of the title compounds have been studied.

A novel microporous Tb-MOF fluorescent sensor for highly selective and sensitive detection of picric acid

A new three-dimensional metal–organic framework (MOF) sensor with molecular formula (C₂H₆NH₂)₂[Tb₂(ptptc)₂(DMF)(H₂O)]·DMF·6H₂O (complex 1) has been constructed from terphenyl-3,3′,5,5′-tetracarboxylic acid (H₄ptptc) and terbium nitrate under solvothermal conditions. The structure of complex 1 was characterized by single-crystal X-ray diffraction analysis (XRD), elemental analysis, IR spectroscopy and thermogravimetric (TG) analysis, and the purity was further confirmed by powder X-ray diffraction (PXRD) analysis. XRD analysis reveals that complex 1 crystallizes in a triclinic system P1̄ space group and consists of a three-dimensional anionic network which has one-dimensional channels. Fluorescence titration experiments showed that complex 1 displayed real-time, highly selective and sensitive fluorescence quenching behavior towards picric acid with a nanomolar scale experimental detection limit (100 nM). Recycling titration experiments suggested that the as-synthesized probe has good reversibility and can be used for at least five cycles in fluorescence titration experiments without obvious fluorescence intensity reduction or framework structure destruction. Furthermore, the high selectivity and sensitivity as well as good recyclability of complex 1 make it a potential fluorescent sensor for picric acid.

A new three-dimensional reusable Tb-MOF fluorescent sensor for the highly selective and sensitive detection of picric acid was reported.

Anion-controlled photochromism of two bipyridinium-based coordination polymers and nondestructive luminescence readout

The first Zn-based coordination polymer constructed with a bipyridinium-functionalized m-benzenedicarboxyl ligand has been synthesized, which can show dual luminescence responses to light in different spectral regions to render nondestructive luminescence readout.