In-Situ Fabrication of MOF-Derived Co−Co Layered Double Hydroxide Hollow Nanocages/Graphene Composite: A Novel Electrode Material with Superior Electrochemical Performance

Layered double hydroxide-based electrode materials derived from metal-organic frameworks: synthesis and applications in supercapacitors

Metal-organic frameworks (MOFs) have emerged as promising electrode materials for supercapacitors (SCs) due to their highly porous structures, tunable chemical compositions, and diverse morphologies. However, their applications are hindered by low conductivity and poor cycling performance. A novel approach for resolving this issue involves the growth of layered double hydroxides (LDHs) using MOFs as efficient templates or precursors for electrode material preparation. This method effectively enhances the stability, electrical conductivity, and mass transport ability of MOFs. The MOF-derived LDH exhibits a well-defined porous micro-/nano-structure, facilitating the dispersion of active sites and preventing the aggregation of LDHs. Firstly, this paper introduces synthesis strategies for converting MOFs into LDHs. Subsequently, recent research progress in MOF-derived LDHs encompassing pristine LDH powders, LDH composites, and LDH-based arrays, along with their applications in SCs, is overviewed. Finally, the challenges associated with MOF-derived LDH electrode materials and potential solutions are discussed.

The Utilization of Metal-Organic Frameworks and Their Derivatives Composite in Supercapacitor Electrodes

Up to now, the mainstream adoption of renewable energy has brought about substantial transformations in the electricity and energy sector. This shift has garnered considerable attention within the scientific community. Supercapacitors, known for their exceptional performance metrics like good charge/discharge capability, strong power density, as well as extended cycle longevity, have gained widespread traction across various sectors, including transportation and aviation. Metal-organic frameworks (MOFs) with unique traits including adaptable structure, highly customizable synthetic methods, and high specific surface area, have emerged as strong candidates for electrode materials. For enhancing the performance, MOFs are commonly compounded with other conducting materials to increase capacitance. This paper provides a detailed analysis of various common preparation strategies and characteristics of MOFs. It summarizes the recent application of MOFs and their derivatives as supercapacitor electrodes alongside other carbon materials, metal compounds, and conductive polymers. Additionally, the challenges encountered by MOFs in the realm of supercapacitor applications are thoroughly discussed. Compared to previous reviews, the content of this paper is more comprehensive, offering readers a deeper understanding of the diverse applications of MOFs. Furthermore, it provides valuable suggestions and guidance for future progress and development in the field of MOFs.

Asymmetric Supercapacitors Using Porous Carbons and Iron Oxide Electrodes Derived from a Single Fe Metal-Organic Framework (MIL-100 (Fe))

MOF-derived carbon (MDC) and metal oxide (MDMO) are superior materials for supercapacitor electrodes due to their high specific capacitances, which can be attributed to their high porosity, specific surface area (SSA), and pore volume. To improve the electrochemical performance, the environmentally friendly and industrially producible MIL-100 (Fe) was prepared using three different Fe sources through hydrothermal synthesis. MDC-A with micro- and mesopores and MDC-B with micropores were synthesized through carbonization and an HCl washing process, and MDMO (α-Fe₂O₃) was obtained by a simple sintering in air. The electrochemical properties in a three-electrode system using a 6 M KOH electrolyte were investigated. These novel MDC and MDMO were applied to an asymmetric supercapacitor (ASC) system to overcome the disadvantages of traditional supercapacitors, enhancing energy density, power density, and cyclic performance. High SSA materials (MDC-A nitrate and MDMO iron) were selected for negative and positive electrode material to fabricate ASC with KOH/PVP gel electrolyte. As-fabricated ASC resulted in high specific capacitance 127.4 Fg^-1 at 0.1 Ag^-1 and 48.0 Fg^-1 at 3 Ag^-1, respectively, and delivered superior energy density (25.5 Wh/kg) at a power density 60 W/kg. The charging/discharging cycling test was also conducted, indicating 90.1% stability after 5000 cycles. These results indicate that ASC with MDC and MDMO derived from MIL-100 (Fe) has promising potential in high-performance energy storage devices.

Exchanging Anion in CuCo-Carbonate Double Hydroxide for Faradaic Supercapacitors: A Case Study

A systematic synthetic method involving the anion exchange process was designed and developed to fabricate the superior functioning three-dimensional (3-D) urchin-architectured copper cobalt oxide (CuCo₂O₄; CCO) and copper cobalt sulfide (CuCo₂S₄; CCS) electrode materials from copper-cobalt carbonate double hydroxide [(CuCo)₂(CO₃)(OH)₂; CCH]. The effective tuning of chemical, crystalline, and morphological properties was achieved during the derivatization process of CCH, based on the anion exchange effect and phase transformation without altering the 3-D spatial assembly. Benefiting from morphological and structural advantages, CCO and CCS exhibited superior electrochemical activity with capacity values of 1508 and 2502 C g^-1 at 10 A g^-1 to CCH (1182 C g^-1 at 10 A g^-1). The thermal treatment of CCH has generated a highly porous nature in nanospikes of 3-D urchin CCO structures, which purveys betterment in electrochemical phenomena than pristine smooth-surfaced CCH. Meanwhile, the sulfurization reaction induced the anion effect to a greater extent in the CCS morphology, resulting in hierarchical 3-D urchins formed by 1-D nanospikes constituting coaxially swirled 2-D nanosheets with high exposure of active sites, specific surface areas, and 3-D electron/ion transportation channels. The asymmetric supercapacitor was constructed with a superior CCS electrode as a cathode and an activated carbon electrode as an anode, showing a high specific capacity of 287.35 C g^-1 at 7 A g^-1 and durability for 5000 cycles with 94.2% retention at a high current density of 30 A g^-1. The ultrahigh energy and power density of 135.3 W h kg^-1 (10 A g^-1) and 44.35 kW kg^-1 (30 A g^-1) were harvested during the PC device performance. Our finding proposes an idea about the importance of anions and phase transformation as a versatile tool for engineering high-functioning electrode materials and their endeavor toward overwhelming the major demerit of SCs by aggrandizing the energy density value and rate performance.

Metal-organic frameworks-derived layered double hydroxides: From controllable synthesis to various electrochemical energy storage/conversion applications

Over the past years, metal-organic frameworks (MOF) have been directly used as electrodes or as a precursor for MOF-derived materials in energy storage and conversion systems. In the wide range of existing MOF derivatives, MOF-derived layered double hydroxides (LDHs) are determined to be promising materials due to their unique structure and features. However, MOF-derived LDHs (MDL) materials can suffer from insufficient intrinsic conductivity and agglomeration during formation. Various techniques and approaches were designed and applied to tackle these problems, such as using ternary LDHs, ion-doping, sulphurization, phosphorylation, selenization, direct growth, and conductive substrates. All the mentioned enhancement techniques aim to create the ideal electrode materials with maximum performance. In this review, we gathered and discussed the most recent progressive advances, different synthesis methodologies, unsolved challenges, applications, and electrochemical and electrocatalytic performance of MDL materials. We hope this work will be a reliable source for future progress and synthesis of these materials.

MOF-derived NiCo-LDH Nanocages on CuO Nanorod Arrays for Robust and High Energy Density Asymmetric Supercapacitors

Layered double hydroxide (LDH) is widely explored in supercapacitors on account of its high capacity, adjustable composition and easy synthesis process. Unfortunately, solitary LDH still has great limitations as an electrode material due to its shortcomings, such as poor conductivity and easy agglomeration. Herein, nanoflakes assembled NiCo-LDH hollow nanocages derived from a metal-organic framework (MOF) precursor are strung by CuO nanorods formed from etching and oxidation of copper foam (CF), forming hierarchical CuO@NiCo-LDH heterostructures. The as-synthesized CuO@NiCo-LDH/CF shows a large capacitance (5607 mF cm^-2 at 1 mA cm^-2 ), superior rate performance (88.3 % retention at 10 mA cm^-2 ) and impressive cycling durability (93.1 % capacitance is retained after 5000 cycles), which is significantly superior to control CuO/CF, CuO@ZIF-67/CF, NiCo-LDH/CF and Cu(OH)₂ @NiCo-LDH/CF electrodes. Besides, an asymmetrical supercapacitor consists of CuO@NiCo-LDH/CF and activated carbon displays a maximum energy density of 47.3 Wh kg^-1 , and its capacitance only declines by 6.8 % after 10000 cycles, demonstrating remarkable cycling durability. The advantages of highly conductive and robust CuO nanorods, MOF-derived hollow structure and the core-shell heterostructure contribute to the outstanding electrochemical performance. This synthesis strategy can be extended to design various core-shell heterostructures adopted in versatile electrochemical energy storage applications.

Synthesis of CNT@CoS/NiCo Layered Double Hydroxides with Hollow Nanocages to Enhance Supercapacitors Performance

One of the key factors to improve electrochemical properties is to find exceptional electrode materials. In this work, the nickel-cobalt layered double hydroxide (CNT@CoS/NiCo-LDH) with the structure of a hollow nanocage was prepared by etching CNT@CoS with zeolitic imidazolate framework-67 (ZIF-67) as a template. The results show that the addition of nickel has a great influence on the structure, morphology and chemical properties of materials. The prepared material CNT@CoS/NiCo-LDH-100 (C@CS/NCL-100) inherited the rhombic dodecahedral shape of ZIF-67 well and the CNTs were evenly interspersed among the rhombic dodecahedrons. The presence of CNTs improved the conductivity and surface area of the samples. The C@CS/NCL-100 demonstrates a high specific capacitance of 2794.6 F·g^-1 at 1 A·g^-1. Furthermore, as an assemble device, the device of C@CS/NCL-100 as a positive electrode exhibits a relatively high-energy density of 35.64 Wh·kg^-1 at a power density of 750 W·kg^-1 Further, even at the high-power density of 3750 W·kg^-1, the energy density can still retain 26.38 Wh·kg^-1. Hence, the superior performance of C@CS/NCL-100 can be ascribed to the synergy among CNTs, CoS and NiCo LDH, as well as the excellent three-dimensional structure obtained by used ZIF-67 as a template.

Metal-organic framework nanocrystal-derived hollow porous materials: Synthetic strategies and emerging applications

Metal-organic frameworks (MOFs) have garnered multidisciplinary attention due to their structural tailorability, controlled pore size, and physicochemical functions, and their inherent properties can be exploited by applying them as precursors and/or templates for fabricating derived hollow porous nanomaterials. The fascinating, functional properties and applications of MOF-derived hollow porous materials primarily lie in their chemical composition, hollow character, and unique porous structure. Herein, a comprehensive overview of the synthetic strategies and emerging applications of hollow porous materials derived from MOF-based templates and/or precursors is given. Based on the role of MOFs in the preparation of hollow porous materials, the synthetic strategies are described in detail, including (1) MOFs as removable templates, (2) MOF nanocrystals as both self-sacrificing templates and precursors, (3) MOF@secondary-component core-shell composites as precursors, and (4) hollow MOF nanocrystals and their composites as precursors. Subsequently, the applications of these hollow porous materials for chemical catalysis, electrocatalysis, energy storage and conversion, and environmental management are presented. Finally, a perspective on the research challenges and future opportunities and prospects for MOF-derived hollow materials is provided.

•

MOFs have garnered multi-disciplinary attention due to their unique inherent properties

•

Various synthetic strategies of MOFs-derived hollow porous materials are summarized

•

Emerging applications of MOFs-derived hollow porous materials are reviewed

Design of ZIF-67 nanoflake derived NiCo-LDH/rGO hybrid nanostructures for aqueous symmetric supercapattery application under alkaline condition

Well-defined polyhedral ZIF-67 metal-organic frameworks (MOFs) are usually synthesized using methanol as solvent. In this work, methanol is replaced with deionized water as a solvent to synthesize ZIF-67 MOFs with unique nanoflake morphology. The ZIF-67 nanoflakes are synthesized directly byin situmethod on reduced graphene oxide (rGO) to obtain ZIF-67/rGO-xprecursors which are further transformed into NiCo-layered double hydroxide nanocomposites (NiCo-LDH/rGO-x,x = 10, 30, 50 and 90 mg of rGO). The NiCo-LDH/rGO-xnanostructured composites are found to be excellent materials for battery type supercapacitor (supercapattery) applications. Among these samples, the NiCo-LDH/rGO-30 composite gives maximum specific capacity of 829 C g^-1(1658 F g^-1) at a current density of 1 A g^-1and high rate capability. The as fabricated 2-electrode symmetric Swagelok deviceNiCo-LDH/rGO-30NiCo-LDH/rGO-30delivered a high energy density of 49.2 Wh kg^-1and a power density of 4511 W kg^-1, and enabled us to glow red, blue and white LED bulbs using three coin cells. The device can show good capacity retention even after 3000 continuous charge-discharge cycles. The NiCo-LDH/rGO-30 composite,in situderived from ZIF-67 MOF in combination with optimal amount of rGO, is an excellent material to deliver both high energy density and high power density in supercapattery devices.

Ready-to-use binder-free Co(OH)2 plates@porous rGO layers/Ni foam electrode for high-performance supercapacitors

In this work, an outstanding nano-structured composite electrode is fabricated through the co-deposition of Co(OH)2 nanoplates and porous reduced GO (p-rGO) nanosheets onto Ni foam (NF). Through field emission scanning electron microscopy and transmission electron microscopy observations, it was confirmed that porous reduced graphene oxide sheets are completely wrapped by uniform hexagonal Co(OH)2 plates. Due to the unique architecture of both components of the prepared composite, a high surface area of 234.7 m2 g-1 and mean pore size of 3.65 nm were observed for the Co(OH)2@p-rGO composite. The constructed Co(OH)2@p-rGO/NF composite electrode shows higher energy storage capability compared to that of Co(OH)2/NF and p-rGO/NF electrodes. The Co(OH)2/NF electrode shows specific capacitances of 902 and 311 F g-1 at 5 and 30 A g-1, while the Co(OH)2@p-rGO/NF electrode delivers 1688 and 1355 F g-1 under the same current loads, respectively. Furthermore, when the current load was increased from 1 to 30 A g-1, 74.5% capacitance retention was observed for the Co(OH)2@p-rGO/NF electrode, indicating its outstanding high-power capability, while the Co(OH)2/NF electrode retained only 38.5% of its initial capacitance. The fabricated Co(OH)2@p-rGO/NF//rGO/NF ASC device shows an areal capacitance of 3.29 F cm-2, cycling retention of 91.2% after 4500 cycles at 5 A g-1 and energy density of 68.7 W h kg-1 at a power density of 895 W kg-1. The results of electrochemical tests prove that Co(OH)2@p-rGO/NF exhibits good performance as a positive electrode for use in an asymmetric supercapacitor device. The prepared porous composite electrode is thus a promising candidate for use in supercapacitor applications.

Synthesis of two-Dimensional layered double hydroxide: A systematic overview

Two-dimensional (2D) layered double hydroxides (LDH) are classic materials in fundamental research and practical application. 2D LDH have unique structural features, such as high aspect ratio, high specific surface area,...

State of the art developments and prospects of metal-organic frameworks for energy applications

The progress on technologies for the cleaner and ecological transformation and storage of energy to combat effluence or pollution and the impending energy dilemma has recently attracted interest from energy research groups, particularly in the field of coordination chemistry, among inorganic chemists. Carriers for storing energy or facilitating mass and e^- transport are considered significant for energy conversion. Accordingly, considering their properties such as large surface area, low cost, customizable pore diameter, tunable topologies, low densities, and variable frameworks, MOFs (metal-organic frameworks) and their derivatives are well-suited for this purpose. MOFs are an innovative category of porous and crystalline materials, which have gained significant interest in recent years. Thus, herein, we highlight the state of the art progress on MOFs for energy-based applications, as perfect compounds and elements in compound assemblies for converting solar energy, lithium-ion arrays, fuel devices, hydrogen production, photocatalytic CO₂ reduction, proton conduction, etc. In addition, the substantial progress achieved in the production of various composites and derivatives containing MOFs with particular focus on supercapacitors and gas adsorption and storage is summarized, concentrating on the correlation between their coordination structural frameworks and applications in the field of energy. The current improved strategies, challenges, and future prospects are also presented in view of the coordination chemistry governing the structural modification of MOFs for energy applications.

In situ synthesis of Fe2O3 nanosphere/Co3O4 nanowire-connected reduced graphene oxide hybrid networks for high-performance supercapacitors

Three-dimensional (3D) hybrid networks consisting of reduced graphene oxide (rGO) sheets interconnected by Co₃O₄ nanowires (rGO/Co₃O₄), followed by the decoration of Fe₂O₃ nanospheres (NSs) (rGO/Co₃O₄@Fe₂O₃), were demonstrated by a facile hydrothermal method, with which the rGO/Co₃O₄ networks acted as nucleation sites for the in situ synthesis of Fe₂O₃ NSs. The intimate contacts between rGO, Co₃O₄ NWs and Fe₂O₃ NSs, which result in an excellent conductive behavior, provide a unique structure with huge potential for electrochemical property promoted electrochemical supercapacitors. The rGO/Co₃O₄@Fe₂O₃ hybrid networks as electrodes exhibit a high capacitance of 784 F g^-1 at 1 A g^-1 with 83% retention of the initial capacitance as the current density increases from 1 to 10 A g^-1, which is explained by the graphene-based interconnected structure owing to the advantages of accommodating the volume expansion between Co₃O₄ NWs and Fe₂O₃ NSs. The supercapacitor was assembled by applying a nickel aluminum layered double hydroxide (NiAl-LDH) structure and rGO/Co₃O₄@Fe₂O₃ as the electrode materials and yields an energy density of 70.78 W h kg^-1 at a power density of 0.29 kW kg^-1. The energy density can maintain 24.24 W h kg^-1 with 9.94 kW kg^-1.

Ni(OH)2 nanodot-decorated Co-Co LDH/C hollow nanocages for a high performance supercapacitor

A novel Co-Co LDH/C/Ni(OH)2 nanostructure was constructed by loading Ni(OH)2 nanodots on hollow Co-Co LDH/C nanocages derived from MOFs. The Co-Co LDH/C/Ni(OH)2 nanostructure revealed a high specific capacitance of up to 1426 F g-1 at 1 A g-1 and an outstanding rate capability with 90.2% retention at 10 A g-1 owing to the cooperative effect of the Ni(OH)2 nanodots and hollow Co-Co LDH/C nanocages. The electrochemical kinetic analysis showed that the Co-Co LDH/C/Ni(OH)2 electrode was dominated by surface capacitance control, demonstrating the origins of performance improvement. This work may provide an effective strategy by combining nanodots with hollow porous structures for low-cost and efficient energy storage materials.

Controllable synthesis of a hollow core-shell Co-Fe layered double hydroxide derived from Co-MOF and its application in capacitive deionization

Capacitive deionization (CDI) is considered one of the most promising desalination technologies for obtaining fresh water from saline water. In this work, we synthesized a hollow core-shell Co-MOF@Fe/Co-LDH (Co-Fe-LDH) material by developing a strategy to simultaneously grow Co/Fe-LDH on the surface of a Co-MOF precursor in situ. Owing to the increase in the specific surface area of the hollow structure and the Faradaic process of a layered double hydroxide (LDH), the Co-Fe-LDH material exhibits high electrical double layer (EDL) capacitance and pseudocapacitance, which significantly improves the salt adsorption of the material during CDI (34.2 mg/g in a 600 mg/L NaCl solution at 1.2 V). The adsorption for NaCl in this work is approximately 2.5 times the maximum salt adsorption capacity (SAC) of LDH materials applied in nonmembrane CDI (NMCDI). This work may provide a promising model for the application of hollow LDH materials that exhibit pseudocapacitance in CDI.

Zeolitic imidazolate framework (ZIF)-derived porous carbon materials for supercapacitors: an overview

The present analysis focuses on the synthetic methods used for the application of supercapacitors with various mysterious architectures derived from zeolitic imidazolate frameworks (ZIFs). ZIFs represent an emerging and unique class of metal–organic frameworks with structures similar to conventional aluminosilicate zeolites, consisting of imidazolate linkers and metal ions. Their intrinsic porous properties, robust functionalities, and excellent thermal and chemical stabilities have resulted in a wide range of potential applications for various ZIF materials. In this rapidly expanding area, energetic research activities have emerged in the past few years, ranging from synthesis approaches to attractive applications of ZIFs. In this analysis, the development of high-performance supercapacitor electrodes and recent strategies to produce them, including the synthesis of various heterostructures and nanostructures, are analyzed and summarized. This analysis goes via the ingenuity of modern science when it comes to these nanoarchitecture electrodes. Despite these significant achievements, it is still difficult to accurately monitor the morphologies of materials derived from metal–organic frameworks (MOFs) because the induction force during structural transformations at elevated temperatures is in high demand. It is also desirable to achieve the direct synthesis of highly functionalized nanosized materials derived from zeolitic imidazolate frameworks (ZIFs) and the growth of nanoporous structures based on ZIFs encoded in specific substrates for the construction of active materials with a high surface area suitable for electrochemical applications. The latest improvements in this field of supercapacitors with materials formed from ZIFs as electrodes using ZIFs as templates or precursors are discussed in this review. Also, the possibility of usable materials derived from ZIFs for both existing and emerging energy storage technologies is discussed.

The present analysis focuses on the synthetic methods used for the application of supercapacitors with various mysterious architectures derived from zeolitic imidazolate frameworks (ZIFs).

Ion Reservoir Enabled by Hierarchical Bimetallic Sulfides Nanocages Toward Highly Effective Sodium Storage

Designing and constructing bimetallic hierarchical structures is vital for the conversion-alloy reaction anode of sodium-ion batteries (SIBs). Particularly, the rationally designed hetero-interface engineering can offer fast diffusion kinetics in the interface, leading to the improved high-power surface pseudocapacitance and cycling stability for SIBs. Herein, the hierarchical zinc-tin sulfide nanocages (ZnS-NC/SnS₂ ) are constructed through hydrothermal and sulfuration reactions. The unconventional hierarchical design with internal void space greatly optimizes the structure stability, and bimetallic sulfide brings a bimetallic composite interface and N heteroatom doping, which are devoted to high electrochemical activity and improved interfacial charge transfer rate for Na⁺ storage. Remarkably, the ZnS-NC/SnS₂ composite anode exhibits a delightful reversible capacity of 595 mAh g^-1 after 100 cycles at 0.2 A g^-1 , and long cycling capability for 500 cycles with a low capacity loss of 0.08% per cycle at 1 A g^-1 . This study opens up a new route for rationally constructing hierarchical heterogeneous interfaces and sheds new light on efficient anode material for SIBs.

Two-dimensional metal-organic frameworks and their derivatives for electrochemical energy storage and electrocatalysis

Two-dimensional (2D) metal-organic frameworks (MOFs) and their derivatives with excellent dimension-related properties, e.g. high surface areas, abundantly accessible metal nodes, and tailorable structures, have attracted intensive attention as energy storage materials and electrocatalysts. A major challenge on the road toward the commercialization of 2D MOFs and their derivatives is to achieve the facile and controllable synthesis of 2D MOFs with high quality and at low cost. Significant developments have been made in the synthesis and applications of 2D MOFs and their derivatives in recent years. In this review, we first discuss the state-of-the-art synthetic strategies (including both top-down and bottom-up approaches) for 2D MOFs. Subsequently, we review the most recent application progress of 2D MOFs and their derivatives in the fields of electrochemical energy storage (e.g., batteries and supercapacitors) and electrocatalysis (of classical reactions such as the HER, OER, ORR, and CO2RR). Finally, the challenges and promising strategies for the synthesis and applications of 2D MOFs and their derivatives are addressed for future development.

Engineering coordination polymer-derived one-dimensional porous S-doped Co3O4 nanorods with rich oxygen vacancies as high-performance electrode materials for hybrid supercapacitors

1D porous S-doped Co₃O₄ nanorods with rich oxygen vacancies and enhanced energy storage capability were engineered by a coordination polymer-engaged strategy.

Fabrication of 2D/2D nanosheet heterostructures of ZIF-derived Co3S4 and g-C3N4 for asymmetric supercapacitors with superior cycling stability

Asymmetric supercapacitors with superior cycling stability are achieved by designing 2D/2D nanosheet heterostructures of ZIF-derived Co₃S₄ and g-C₃N₄.

Hot electron prompted highly efficient photocatalysis based on 3D graphene/non-precious metal nanoparticles

High dispersibility and rapid electron transfer are required for a highly efficient catalyst. In this work, such materials have been designed using a scalable hydrothermal method from graphene oxide and a metal–organic framework. A cross-linked three-dimensional graphene (3DGraphene) material loaded with mono-dispersed nitrogen-doped carbon-coated metallic Co (NC@Co) nanoparticles with uniform size of 12.2 nm (3DGraphene/NC@Co) has been obtained and exhibits excellent activity for catalytic reduction of 4-nitrophenol to 4-aminophenol. Such high catalytic activity can be assigned to the highly energetic hot/free electrons arising from 3DGraphene under light illumination and the synergistic effect between 3DGraphene and NC@Co nanoparticles. The catalytic reaction can be finished in 240 s with NaBH₄ as the reducing agent, and the corresponding rate constant (k) is 1.5 × 10⁻² s⁻¹, comparable to that of reported noble metal catalysts. Furthermore, the magnetic 3DGraphene/NC@Co materials are beneficial for the separation from the mixture after reaction and exhibit excellent cycling stability.

Based on the highly energetic hot/free electrons, 3DGraphene loaded nitrogen-doped carbon-coated Co catalysts show remarkably enhanced photocatalytic activities.

In situ synthesis of quasi-needle-like bimetallic organic frameworks on highly porous graphene scaffolds for efficient electrocatalytic water oxidation

We present enhanced electrocatalytic activity of three-dimensional graphene scaffolds by decoration with one-dimensional Co_xNi_1−x MOF nanostructures (0 ≤ x ≤ 1).

Hollow Metal-Organic-Framework Micro/Nanostructures and their Derivatives: Emerging Multifunctional Materials

Hollow metal-organic framework (MOF) micro/nanostructures and their derivatives are attracting a great amount of research interest in recent years because their hierarchical porous structures not only provide abundant, easily accessed metal sites but also endow 3D channels for rapid mass transport. As a result, they demonstrate significant advantages in many applications including catalysis, gas sensors, batteries, supercapacitors, and so on. Nevertheless, studies on hollow MOFs and their derivatives are still at the beginning of this field, and the relationship between their structures and application performances is not yet reviewed comprehensively. Herein, the synthetic strategies and practical applications of hollow micro/nanostructured MOFs and their derivatives are summarized, and their corresponding prospects are also discussed.

Ultrathin Ni-MOF nanosheet arrays grown on polyaniline decorated Ni foam as an advanced electrode for asymmetric supercapacitors with high energy density

Metal-organic frameworks (MOFs) have emerged as promising electrode materials for supercapacitors (SCs), due to their diverse functionalities and high porosity. However, the applications of MOFs in practical SC devices are restricted by their intrinsic low conductivity and poor stability. Herein, a thin layer of conductive polyaniline (PANI) was decorated on Ni foam (NF) before the growth of Ni-MOF to tackle these issues. PANI not only improves the conductivity but also promotes the formation of Ni-MOF nanosheet arrays and ensures good mechanical adhesion. The as-prepared Ni-MOF/PANI/NF exhibits a high areal capacitance (3626.4 mF cm-2 at 2 mA cm-2) and good rate capacity (71.3% at 50 mA cm-2). Moreover, an asymmetric supercapacitor (ASC) device using Ni-MOF/PANI/NF and activated carbon (AC) can deliver a maximum energy density of 45.6 W h kg-1 (850.0 W kg-1) with excellent cycling stability (capacitance retention of 81.6% after 10 000 cycles), outperforming most of the reported pristine MOF-based ASC devices.

Fabrication of double-shell hollow NiO@N-C nanotubes for a high-performance supercapacitor

Rational fabrication of carbon-based materials hybridized with transition-metal oxides is crucial for the design of supercapacitor electrodes with superior properties.

Sandwich-like NiCo layered double hydroxide/reduced graphene oxide nanocomposite cathodes for high energy density asymmetric supercapacitors

Lab-synthesized sandwich-like LDH/rGO composites were assembled into asymmetric supercapacitors exhibiting high energy density and excellent cycling stability.

Bifunctionality from Synergy: CoP Nanoparticles Embedded in Amorphous CoOx Nanoplates with Heterostructures for Highly Efficient Water Electrolysis

Hydrogen production from renewable electricity relies upon the development of an efficient alkaline water electrolysis device and, ultimately, upon the availability of low cost and stable electrocatalysts that can promote oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Normally, different electrocatalysts are applied for HER and OER because of their different reaction intermediates and mechanisms. Here, the synthesis of a heterostructured CoP@a-CoOx plate, which constitutes the embedded crystalline cobalt phosphide (CoP) nanoclusters and amorphous cobalt oxides (CoOx) nanoplates matrix, via a combined solvothermal and low temperature phosphidation route is reported. Due to the presence of synergistic effect between CoP nanoclusters and amorphous CoOx nanoplates in the catalyst, created from the strong nanointerfaces electronic interactions between CoP and CoOx phases in its heterostructure, this composite displays very high OER activity in addition to favorable HER activity that is comparable to the performance of the IrO2 OER benchmark and approached that of the Pt/C HER benchmark. More importantly, an efficient and stable alkaline water electrolysis operation is achieved using CoP@a-CoOx plate as both cathode and anode as evidenced by the obtainment of a relatively low potential of 1.660 V at a 10 mA cm-2 current density and its marginal increase above 1.660 V over 30 h continuous operation.

Designed formation of Co3O4/ZnCo2O4/CuO hollow polyhedral nanocages derived from zeolitic imidazolate framework-67 for high-performance supercapacitors

Zeolitic imidazolate frameworks have stimulated great attention due to their potential applications in energy storage, catalysis, gas sensing, drug delivery etc. In this paper, the three-dimensional porous nanomaterial Co3O4/ZnCo2O4/CuO with hollow polyhedral nanocage structures and highly enhanced electrochemical performances was synthesized successfully by a zeolitic imidazolate framework-67 route. The composites hold the shape of the ZIF-67 templates well and the shell has multiple compositions. In the process, we first synthesized the nanostructure hydroxide precursors and then transformed them into the corresponding metal oxide composites by thermal annealing in air. In addition, the mass ratio of Zn to Cu in this material is discussed and optimized. We found that when the mass ratio is 3, the composite material has better electrochemical properties. When applied as an electrode material, Co3O4/ZnCo2O4/CuO-1 shows enhanced pseudocapacitive properties and good cycling stability compared with Co3O4/ZnCo2O4, Co3O4/CuO and Co3O4/ZnCo2O4/CuO-2, and Co3O4/ZnCo2O4/CuO-3. The assembled Co3O4/ZnCo2O4/CuO-1//AC hybrid device can be reversibly cycled in a large potential range of 0-1.6 V and can deliver a high energy density of 35.82 W h kg-1 as well as the maximum power density of 4799.25 W kg-1.

"One-for-All" Strategy in Fast Energy Storage: Production of Pillared MOF Nanorod-Templated Positive/Negative Electrodes for the Application of High-Performance Hybrid Supercapacitor

Currently, metal-organic frameworks (MOFs) are intensively studied as active materials for electrochemical energy storage applications due to their tunable structure and exceptional porosities. Among them, water stable pillared MOFs with dual ligands have been reported to exhibit high supercapacitor (SC) performance. Herein, the "One-for-All" strategy is applied to synthesize both positive and negative electrodes of a hybrid SC (HSC) from a single pillared MOF. Specifically, Ni-DMOF-TM ([Ni(TMBDC)(DABCO)_0.5 ], TMBDC: 2,3,5,6-tetramethyl-1,4-benzenedicarboxylic acid, DABCO: 1,4-diazabicyclo[2.2.2]-octane) nanorods are directly grown on carbon fiber paper (CFP) (denoted as CFP@TM-nanorods) with the help of triethylamine and function as the positive electrode of HSC under alkaline electrolyte. Meanwhile, calcinated N-doped hierarchical porous carbon nanorods (CFP@TM-NPCs) are produced and utilized as the negative counter-electrode from a one-step heat treatment of CFP@TM-nanorods. After assembling these two electrodes together to make a hybrid device, the TM-nanorods//TM-NPCs exhibit a wide voltage window of 1.5 V with a high sloping discharge plateau between 1-1.2 V, indicating its great potential for practical applications. This as-described "One-for-All" strategy is widely applicable and highly reproducible in producing MOF-based electrode materials for HSC applications, which shortens the gap between experimental synthesis and practical application of MOFs in fast energy storage.