Pre-Assembled Coumarin-Rhodamine Scaffold for Ratiometric Sensing of Nitric Oxide and Hypochlorite

Facile synthesis of long-wavelength emission carbon dots for hypochlorite sensing and intracellular pH imaging

Hypochlorite (ClO-), a typical reactive oxygen species, plays an irreplaceable roles in various biological processes. In this work, long-wavelength emission carbon dots (LW-CDs) were fabricated through one-step hydrothermal method by using l-cysteine (cys) and neutral red (NR) as precursors for monitoring of hypochlorite and intracellular pH. Characterizations of as-prepared LW-CDs showed that they had excellent water solubility, high optical stability and sensitive response behavior. Fluorescence intensity of LW-CDs decayed in the presence of ClO- linearly from 10 to 162.5 μM (LOD = 1.021 μM) based on static quenching effect with ideal selectivity. Besides, LW-CDs revealed a pH responsive behavior in the pH range of 2.0 to 10.0, exhibited dual good linear relationships in the pH ranges of 4.2-5.8 and 5.8-7.4. The LW-CDs can also be utilized as imaging reagents in Hela living cells owing excellent biocompatibility and low cytotoxicity. These results demonstrated that the as-mentioned LW-CDs are expected to serve as excellent long wavelength emitting nanomaterials for fluorescence sensing and monitoring of cell fluctuations.

Ex Tenebris Lux: Illuminating Reactive Oxygen and Nitrogen Species with Small Molecule Probes

Reactive oxygen and nitrogen species are small reactive molecules derived from elements in the air─oxygen and nitrogen. They are produced in biological systems to mediate fundamental aspects of cellular signaling but must be very tightly balanced to prevent indiscriminate damage to biological molecules. Small molecule probes can transmute the specific nature of each reactive oxygen and nitrogen species into an observable luminescent signal (or even an acoustic wave) to offer sensitive and selective imaging in living cells and whole animals. This review focuses specifically on small molecule probes for superoxide, hydrogen peroxide, hypochlorite, nitric oxide, and peroxynitrite that provide a luminescent or photoacoustic signal. Important background information on general photophysical phenomena, common probe designs, mechanisms, and imaging modalities will be provided, and then, probes for each analyte will be thoroughly evaluated. A discussion of the successes of the field will be presented, followed by recommendations for improvement and a future outlook of emerging trends. Our objectives are to provide an informative, useful, and thorough field guide to small molecule probes for reactive oxygen and nitrogen species as well as important context to compare the ecosystem of chemistries and molecular scaffolds that has manifested within the field.

Self-indicating polymers: a pathway to intelligent materials

Self-indicating polymers have emerged as a promising class of smart materials that possess the unique ability to undergo detectable variations in their physical or chemical properties in response to various stimuli. This article presents an overview of the most important mechanisms through which these materials exhibit self-indication, including aggregation, phase transition, covalent and non-covalent bond cleavage, isomerization, charge transfer, and energy transfer. Aggregation is a prevalent mechanism observed in self-indicating polymers, where changes in the degree of molecular organization result in variations in optical or electrical properties. Phase transition-induced self-indication relies on the transformation between different phases, such as liquid-to-solid or crystalline-to-amorphous transitions, leading to observable changes in color or conductivity. Covalent bond cleavage-based self-indicating polymers undergo controlled degradation or fragmentation upon exposure to specific triggers, resulting in noticeable variations in their structural or mechanical properties. Isomerization is another crucial mechanism exploited in self-indicating polymers, where the reversible transformation between the different isomeric forms induces detectable changes in fluorescence or absorption spectra. Charge transfer-based self-indicating polymers rely on the modulation of electron or hole transfer within the polymer backbone, manifesting as changes in electrical conductivity or redox properties. Energy transfer is an essential mechanism utilized by certain self-indicating polymers, where energy transfer between chromophores or fluorophores leads to variations in the emission characteristics. Furthermore, this review article highlights the diverse range of applications for self-indicating polymers. These materials find particular use in sensing and monitoring applications, where their responsive nature enables them to act as sensors for specific analytes, environmental parameters, or mechanical stress. Self-indicating polymers have also been used in the development of smart materials, including stimuli-responsive coatings, drug delivery systems, food sensors, wearable devices, and molecular switches. The unique combination of tunable properties and responsiveness makes self-indicating polymers highly promising for future advancements in the fields of biotechnology, materials science, and electronics.

Rational Design and Biological Application of Hybrid Fluorophores

Fluorophores are considered powerful tools for not only enabling the visualization of cell structures, substructures, and biological processes, but also making for the quantitative and qualitative measurement of various analytes in living systems. However, most fluorophores do not meet the diverse requirements for biological applications in terms of their photophysical and biological properties. Hybridization is an important strategy in molecular engineering that provides fluorophores with complementarity and multifunctionality. This review summarizes the basic strategies of hybridization with four classes of fluorophores, including xanthene, cyanine, coumarin, and BODIPY with a focus on their structure-property relationship (SPR) and biological applications. This review aims to provide rational hybrid ideas for expanding the reservoir of knowledge regarding fluorophores and promoting the development of newly produced fluorophores for applications in the field of life sciences.

3-Phenylcoumarins as a Privileged Scaffold in Medicinal Chemistry: The Landmarks of the Past Decade

3-Phenylcoumarins are a family of heterocyclic molecules that are widely used in both organic and medicinal chemistry. In this overview, research on this scaffold, since 2010, is included and discussed, focusing on aspects related to its natural origin, synthetic procedures and pharmacological applications. This review paper is based on the most relevant literature related to the role of 3-phenylcoumarins in the design of new drug candidates. The references presented in this review have been collected from multiple electronic databases, including SciFinder, Pubmed and Mendeley.

Development of Water Solubility of 2-Phenylsulfanylhydroquinone Dimer Dye

With the aim of developing a new fluorescence dye with enhanced photophysical properties, this study describes the modification of the 2-phenylsulfanylhydroquinone dimer to realize a new bioimaging molecule. The characteristics of the dimer were advanced by introducing tetraethylene glycol side chains to provide sufficient water solubility and a tether consisting of an N-hydroxysuccinimide-terminated C6-carbon chain to attach bioactive molecules. Two derivatives containing two or three tetraethylene glycol side chains were designed and prepared, and the latter showed sufficient water solubility for biochemical applications. Both compounds exhibited similar photophysical properties and blue fluorescence under UV light irradiation. The dye containing three tetraethylene glycol units reacted with bovine serum albumin in water to give fluorescent derivatives.

Self-assembled nanofibers of perylene diimide for the detection of hypochlorite in water, bio-fluids and solid-state: exogenous and endogenous bioimaging of hypochlorite in cells

PDI–DAMN shows the disintegration of nanofibers into flake-like aggregates with ‘turn-on’ fluorescence response on the addition of ClO⁻ in solid-state, bio-fluids and MG-63 cells.

2-Sulfanylhydroquinone Dimer as a Switchable Fluorescent Dye

A new dye was developed, the photoluminescence properties of which are controlled by a chemical reaction. The fluorescence properties of 2-sulfanylhydroquinone dimers depend on the number of hydroxyl groups that are acylated. Unprotected or monoacylated 2-sulfanylhydroquinone dimers displayed good fluorescence properties, whereas diacylated and tetraacylated 2-sulfanylhydroquinone dimers showed dramatically decreased fluorescence. A monomesylated derivative was devised, which shows good fluorescence characteristics as a switching fluorescence dye through a chemical reaction.

Coumarin-Based Small-Molecule Fluorescent Chemosensors

Coumarins are a very large family of compounds containing the unique 2H-chromen-2-one motif, as it is known according to IUPAC nomenclature. Coumarin derivatives are widely found in nature, especially in plants and are constituents of several essential oils. Up to now, thousands of coumarin derivatives have been isolated from nature or produced by chemists. More recently, the coumarin platform has been widely adopted in the design of small-molecule fluorescent chemosensors because of its excellent biocompatibility, strong and stable fluorescence emission, and good structural flexibility. This scaffold has found wide applications in the development of fluorescent chemosensors in the fields of molecular recognition, molecular imaging, bioorganic chemistry, analytical chemistry, materials chemistry, as well as in the biology and medical science communities. This review focuses on the important progress of coumarin-based small-molecule fluorescent chemosensors during the period of 2012-2018. This comprehensive and critical review may facilitate the development of more powerful fluorescent chemosensors for broad and exciting applications in the future.

Photoinduced holes transfer based visual determination of dopamine in human serum

A simple unexplored strategy was followed to construct ratiometric fluorescence-based sensing system for the detection of dopamine (DA) in human serum. Ratiometric fluorescence system was constructed through bonding energy transfer (TBET) by conjugating carboxyl functionalized CdTe quantum dots (QDs) and amine-capped Carbon quantum dots (CQDs). The photophysical properties of sensing system were characterized by standard methods. Photoluminescence (PL) of sensing system under excitonic wavelength (350 nm) depends on dual emission at 440 and 595 nm that corresponds to CQDs and CdTe QDs respectively. The developed sensing system was utilized for visual determination of DA, an unquenched blue fluorescence of CQDs in ratiometric system reveals the visual color differentiation for DA binding with CdTe QDs among the possible interferences (Alanine, Glycine, Glucose, Sucrose, Urea and Ascorbic acid). The limit of detection (LOD) and quantification (LOQ) was calculated as 8.1 and 27.2 nm respectively by using regression analysis. Photoinduced holes transfer (PHT) might have attributed the possible sensing mechanism for DA that quench the photoluminescence sequentially to enhance the sensing performance of QDs. The matrix interferences and reliability of the developed sensing platform were evaluated by testing DA spiked human serum and the sensing response was found to be field deployable.

A rhodamine-based fast and selective fluorescent probe for monitoring exogenous and endogenous nitric oxide in live cells

A sensitive and selective fluorescent probe for fast detection of nitric oxide was synthesized by grafting a NO-trapper o-phenylenediamine onto a rhodamine fluorophore.