N-Doped Carbon Nanofibrous Network Derived from Bacterial Cellulose for the Loading of Pt Nanoparticles for Methanol Oxidation Reaction

Highly dispersed Ir/Fe nanoparticles anchored at nitrogen-doped activated pyrolytic carbon black as a high-performance OER catalyst for lead recovery

The use of a methanesulfonic acid (MSA) electrolytic system is recommended as a green method for hydrometallurgical recovery of metallic Pb from waste lead-acid batteries (LABs), contributing to the sustainable protection of the ecosystem. Nevertheless, the system's high energy consumption is a current issue due to the substantial overpotential of the oxygen evolution reaction (OER) and competitive anodic oxidation of Pb2+. Herein, we propose an IrFe/nitrogen-doped pyrolytic carbon black (IrFe/NCBp) composite as a novel OER catalyst for the MSA electrolytic system, which demonstrates advanced OER catalytic efficiency and selectivity for H2O oxidation. This can be ascribed to the catalyst's thoughtful design, which enhances the number and uniformity of Ir and Fe species via increasing the specific surface area and employing NCBp as a sustainable substrate. The optimized IrFe/NCBp composite exhibits superior OER performance, with a low 252 mV@10 mA cm-2 overpotential and a 62 mV dec-1 Tafel slope, and excellent durability in a 1 M MSA electrolyte for 30 h operation compared to commercial Ir/C. In contrast to carbon paper (CP) and commercial Ir/C anodes, the anodic reaction of IrFe/NCBp is primarily OER-driven (97%) in 1 M MSA and 0.2 M Pb2+ electrolyte for Pb recovery. This effectively circumvents the high potential oxidation of Pb2+ into PbO2, reducing the electrolytic voltage to 488 kWh for the recovery of 1 ton Pb metal. This work provides a green, low-carbon footprint solution for the MSA electrolytic system, thereby promoting the commercialization of the hydrometallurgical Pb recovery.

Bacterial nanocellulose as green support of platinum nanoparticles for effective methanol oxidation

Bacterial nanocellulose, BNC, has emerged as a new class of nanomaterials recognized as renewable, biodegradable, biocompatible and material for versatile applications. BNC also proved as a perfect support matrix for metallic nanoparticle synthesis and appeared as suitable alternative for widely used carbon based materials. Following the idea to replace commonly used carbon based materials for platinum supports with the green and sustainable one, BNC appeared as an excellent candidate. Herein, microwave assisted synthesis has been reported for the first time for platinum nanoparticles supported on BNC as green material. Bacterial nanocelullose-platinum catalyst, Pt/BNC, was investigated by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), X-ray diffractometry (XRD) and transmission-electron microscopy (TEM) analysis. The obtained results confirmed successful synthesis of new Pt-based catalyst. It was found that Pt/BNC catalyst has high electrocatalytic performance in methanol oxidation reaction. Green/sustainable catalytic system is highly desirable and provided by the elegant microwave assisted synthesis of Pt/BNC will pave the way for a larger scale application and expedite the market penetration of such fuel cells.

In situ self-assembled N-rich carbon on pristine graphene as a highly effective support and cocatalyst of short Pt nanoparticle chains for superior electrocatalytic activity toward methanol oxidation

Highly conductive cocatalysts with great promotion effects are critical for the development of pristine graphene supported Pt-based catalysts for the methanol oxidation reaction (MOR) in direct methanol fuel cells (DMFCs). However, identification of these cocatalysts and controlled fabrication of Pt/cocatalyst/graphene hybrids with superior catalytic performance present great challenges. For the first time, pristine graphene supported N-rich carbon (NC) has been controllably fabricated via ionic-liquid-based in situ self-assembly for in situ growth of small and uniformly dispersed Pt NP chains to improve the MOR catalytic activity. It is discovered that the NC serves simultaneously as a linker to facilitate in situ nucleation of Pt, a stabilizer to restrict its growth and aggregation, and a structure-directing agent to induce the formation of Pt NP chains. The obtained nanohybrid shows a much higher forward peak current density than commercial Pt/C and most reported noncovalently functionalized carbon (NFC) supported Pt catalysts, a lower onset potential than almost all commercial Pt/C and NFC supported Pt, and greatly enhanced durability compared to graphene supported Pt NPs and commercial Pt/C. The superior catalytic performance is ascribed to the uniformly dispersed, small-diameter, and short Pt NP chains supported on highly conductive G@NC providing high ECSA and improved CO tolerance and the NC with high content of graphitic N greatly enhancing the intrinsic activity and CO tolerance of Pt and offering numerous binding sites for robustly attaching Pt. This work not only identifies and controllably fabricates a novel cocatalyst to significantly promote the catalytic activity of pristine graphene supported Pt but provides a facile and economical strategy for the controlled synthesis of high-performance integrated catalysts for the MOR in DMFCs.

Efficient catalytic reduction of highly toxic aqueous Cr(VI) with Fe@CBC/Pd composites at room temperature

We report a facile approach to fabricating catalytic active palladium nanoparticles (NPs) immobilized on Fe-loaded carbonized bacterial cellulose nanofibers (Fe@CBC) for the catalytic reduction of toxic Cr(VI) to Cr(III) at room temperature. The formed nanofiber composites (Fe@CBC/Pd) was investigated by various physicochemical characterization and its catalytic activity, and reusability were evaluated as well. The results demonstrated that the Fe@CBC/Pd exhibited favorable catalytic activity for the reduction of Cr(VI) to Cr(III) in the presence of HCOOH. Moreover, the catalyst could be easily recovered from reaction system in a facile manner and recycled four times without obvious loss in activity.

Free-standing SnS/carbonized cellulose film as durable anode for lithium-ion batteries

Metal sulfides have recently attracted broad attention for lithium-ion batteries (LIB) owing to their high theoretical capacity and long lifetime. However, the inferior structural integrity and low electron conductivity of metal sulfides limit their practical applications. A feasible strategy is to distribute these materials in conductive carbonaceous substrates with shapeable morphology. Here we report the design of free-standing films of tin sulfide (SnS) nanosheets distributed uniformly on carbonized bacterial cellulose (CBC) nanofibers. The SnS/CBC composites possess three dimensional interconnected nanostructures, which is crucial for the high conductivity and high lithium storage capacity. LIB using SnS/CBC as anode exhibits a reversible capacity of 872 mA h g^-1 at 100 mA g^-1 after 100 cycles, and the capacity remains as high as 527 mA h g^-1 at 2000 mA g^-1 after 1000 cycles. The free-standing sulfide-based nanocomposites with unique nanostructure composition and flexibility could be utilized as promising electrode materials for future LIB systems.

Applications of Nanocellulose/Nanocarbon Composites: Focus on Biotechnology and Medicine

Nanocellulose/nanocarbon composites are newly emerging smart hybrid materials containing cellulose nanoparticles, such as nanofibrils and nanocrystals, and carbon nanoparticles, such as "classical" carbon allotropes (fullerenes, graphene, nanotubes and nanodiamonds), or other carbon nanostructures (carbon nanofibers, carbon quantum dots, activated carbon and carbon black). The nanocellulose component acts as a dispersing agent and homogeneously distributes the carbon nanoparticles in an aqueous environment. Nanocellulose/nanocarbon composites can be prepared with many advantageous properties, such as high mechanical strength, flexibility, stretchability, tunable thermal and electrical conductivity, tunable optical transparency, photodynamic and photothermal activity, nanoporous character and high adsorption capacity. They are therefore promising for a wide range of industrial applications, such as energy generation, storage and conversion, water purification, food packaging, construction of fire retardants and shape memory devices. They also hold great promise for biomedical applications, such as radical scavenging, photodynamic and photothermal therapy of tumors and microbial infections, drug delivery, biosensorics, isolation of various biomolecules, electrical stimulation of damaged tissues (e.g., cardiac, neural), neural and bone tissue engineering, engineering of blood vessels and advanced wound dressing, e.g., with antimicrobial and antitumor activity. However, the potential cytotoxicity and immunogenicity of the composites and their components must also be taken into account.

Novel networked wicker-like PtFe nanowires with branch-rich exteriors for efficient electrocatalysis

The construction of Pt-based networked nanowire nanocatalysts with high performance is significant in the application of direct alcohol fuel cells. However, it is still a challenge to precisely regulate the surface structure and further improve their catalytic behavior. For this purpose, we have synthesized a series of novel networked wicker-like PtFe nanowire catalysts, different from previous networked nanowire catalysts with smooth surfaces, and the PtFe catalysts possess branch-rich exteriors on the rough surface of each nanowire similar to wickers and they interconnect with each other, which lead to rich steps and defects. Importantly, after electrochemical tests, the composition-optimized Pt₃Fe nanowires were found to exhibit superior catalytic performance towards the ethanol oxidation reaction (EOR) and methanol oxidation reaction (MOR) compared to that of commercial Pt/C catalysts in acid media. In particular, the specific activities of Pt₃Fe nanowires are 7.3 and 7.1 times higher than those of the Pt/C catalysts for EOR and MOR, respectively. In addition, the Pt₃Fe nanowires also show the best durability among these catalysts after 1000 successive cycles, and their residual activities are far better than those of the Pt/C catalysts. The synthesis of wicker-like networked PtFe nanowires offers a new guideline to tune the structure and composition of nanocatalysts for their use in direct alcohol fuel cells and beyond.

Preparation of bacterial cellulose based nitrogen-doped carbon nanofibers and their applications in the oxygen reduction reaction and sodium–ion battery

3D N-doped carbon nanofibers were fabricated from low-cost biomass bacterial cellulose and used as electrodes for both ORR and SIBs.