Highly Luminescent CsPbX3 (X=Cl, Br, I) Nanocrystals Achieved by a Rapid Anion Exchange at Room Temperature

Spray-driven halide exchange in solid-state CsPbX3 nanocrystal films

CsPbI₃ perovskite nanocrystals (NCs) are promising building blocks for photovoltaics and optoelectronics. However, they exhibit an essential drawback in the form of phase stability: α-phase, with a ∼1.80 eV bandgap, can easily experience a phase transition to a non-radiative orthorhombic δ-phase in an ambient environment. This leads to the need to carry out the CsPbI₃-based device fabrication in an inert atmosphere, which is technologically inconvenient and expensive. One of the most successful approaches proposed to overcome this problem is synthesizing mixed halide CsPbBr_3-xI_x NCs to improve the stability of the α-phase perovskite structure. However, the formation of high-quality thin films of CsPbBr_3-xI_x NCs with high PLQY is challenging owing to the degradation of their optical properties after deposition on a substrate. This work presents spray coating to carry out a solid-state anion exchange in CsPbBr₃ NCs thin films at ambient conditions with low-demanding reaction conditions. This constitutes a novel open-air and annealing-free technology to manufacture CsPbBr_3-xI_x NC thin films with high optical quality and record high photoluminescence quantum yields (PLQY) based on spray-driven halide (Br^- to I^-) anion exchange in a solid-state phase. Besides, tunable emission wavelengths between 520 and 670 nm can be obtained from CsPbBr_3-xI_x NC films using accurate tuning volumes of HI solution sprayed over the initial surface of CsPbBr₃ film to provide the halide exchange. The optical quality of the halide-exchanged PNCs films remains practically identical to that of initial Br-containing layers, with a remarkable PLQY enhancement after anion exchange, from ∼61% for CsPbBr₃ thin films emitting at 520 nm to ∼84% for mixed halide CsPbBr_3-xI_x film emitting at 640 nm. The huge potential of the system is confirmed by demonstrating a low-threshold amplified spontaneous emission.

CsCu2I3 Nanocrystals: Growth and Structural Evolution for Tunable Light Emission

CsCu₂I₃ mixed with Cs₃Cu₂I₅ has shown potential applications as white-light-emitting materials, while their growth, structural evolution behaviors, and their impact on photoluminescence of CsCu₂I₃ nanocrystals (NCs) are still not known. In this work, we investigated the growth and structural evolution of CsCu₂I₃ nanocrystals with increasing reaction temperature. At low temperature and in the presence of a high dosage of oleic acid and oleylamine, Cs₃Cu₂I₅ nanoparticles, rather than CsCu₂I₃ NCs, preferred to form in the hot-injection reaction system. Increasing the reaction temperature promoted the formation of CsCu₂I₃ nanorods. Phase-pure CsCu₂I₃ nanorods were steadily obtained at 180 °C. Structural evolution from less copper-containing NCs to copper-rich ones in the low-temperature reaction condition is highly related to the coordination of copper ions with OAm. More importantly, accompanying the growth of nanorods and structural evolution from Cu₃Cs₂I₅ to CsCu₂I₃, the color of photoluminescence emission of NCs changed from blue to nearly white and to yellow, but their photoluminescence quantum yield decreased from 36.00 to 9.86%. The finding in this work would give a view to the structural evolution of copper-containing perovskite-like halides, being helpful for adjusting their photoluminescence in white LEDs.

Recent Progress and Development in Inorganic Halide Perovskite Quantum Dots for Photoelectrochemical Applications

Inorganic halide perovskite quantum dots (IHPQDs) have recently emerged as a new class of optoelectronic nanomaterials that can outperform the existing hybrid organometallic halide perovskite (OHP), II-VI and III-V groups semiconductor nanocrystals, mainly due to their relatively high stability, excellent photophysical properties, and promising applications in wide-ranging and diverse fields. In particular, IHPQDs have attracted much recent attention in the field of photoelectrochemistry, with the potential to harness their superb optical and charge transport properties as well as spectacular characteristics of quantum confinement effect for opening up new opportunities in next-generation photoelectrochemical (PEC) systems. Over the past few years, numerous efforts have been made to design and prepare IHPQD-based materials for a wide range of applications in photoelectrochemistry, ranging from photocatalytic degradation, photocatalytic CO₂ reduction and PEC sensing, to photovoltaic devices. In this review, the recent advances in the development of IHPQD-based materials are summarized from the standpoint of photoelectrochemistry. The prospects and further developments of IHPQDs in this exciting field are also discussed.

Individual Cloud-Based Fingerprint Operation Platform for Latent Fingerprint Identification Using Perovskite Nanocrystals as Eikonogen

Fingerprint formed through lifted papillary ridges is considered the best reference for personal identification. However, the currently available latent fingerprint (LFP) images often suffer from poor resolution, have a low degree of information, and require multifarious steps for identification. Herein, an individual Cloud-based fingerprint operation platform has been designed and fabricated to achieve high-definition LFPs analysis by using CsPbBr₃ perovskite nanocrystals (NCs) as eikonogen. Moreover, since CsPbBr₃ NCs have a special response to some fingerprint-associated amino acids, the proposed platform can be further used to detect metabolites on LFPs. Consequently, in virtue of Cloud computing and artificial intelligence (AI), this study has demonstrated a champion platform to realize the whole LFP identification analysis. In a double-blind simulative crime game, the enhanced LFP images can be easily obtained and used to lock the suspect accurately within one second on a smartphone, which can help investigators track the criminal clue and handle cases efficiently.

Properties of Excitons and Photogenerated Charge Carriers in Metal Halide Perovskites

Metal halide perovskites (MHPs) have recently attracted great attention from the scientific community due to their excellent photovoltaic performance as well as their tremendous potential for other optoelectronic applications such as light-emitting diodes, lasers, and photodetectors. Despite the rapid progress in device applications, a solid understanding of the photophysical properties behind the device performance is highly desirable for MHPs. Here, the properties of excitons and photogenerated charge carriers in MHPs are explored. The unique dielectric constant properties, crystal-liquid duality, and fundamental optical processes of MHPs are first discussed. The properties of excitons and related phenomena in MHPs are then detailed, including the exciton binding energy determined by various methods and their influence factors, exciton dynamics, exciton-photon coupling and related applications, and exciton-phonon coupling in MHPs. The properties of photogenerated free charge carriers in MHPs such as the carrier diffusion length, mobility, and recombination are described. Recent progress in various applications is also demonstrated. Finally, a conclusion and perspectives of future studies for MHPs are presented.

Instantaneous, room-temperature, open-air atmosphere, solution-phase synthesis of perovskite quantum dots through halide exchange employing non-metal based inexpensive HCl/HI: ensemble and single particle spectroscopy

Herein, the instantaneous synthesis of highly crystalline, uniform-sized (ca. 11.3 ± 0.1 nm), blue-to-green to yellow to red-emitting all-inorganic perovskite quantum dots (CsPbBr₃ and mixed halide PQDs) was achieved at room temperature under an open-air atmosphere (no glove box) through halide exchange in the solution phase employing easily available, inexpensive non-metal-based halide sources such as HCl and HI. No complicated pre-treatment of the halide source was required. Moreover, these PQDs were stable for a few weeks under an open-air atmosphere. The PL emission spectra are quite narrow, and the PLQYs are quite high (80% for even Br/I mixed PQDs). At the single particle level, the 〈ON fraction〉 has been noted to vary from 75% to 85% for different PQDs, the m _ON values are close to 1.0, and the m _OFF values are >1.5. The latter indicates that long ON durations are more probable. The increase in the ON event truncation time (from 2.7 to 4.0 s) and the concomitant decrease in the OFF event truncation time (from 6.6 to 4.3 s) could be correlated with the increase in the PLQY (from 0.55 to 0.75). In addition, an interesting memory effect could be observed in both the ON and the OFF event durations.

Engineering the Photoluminescence of CsPbX3 (X = Cl, Br, and I) Perovskite Nanocrystals Across the Full Visible Spectra with the Interval of 1 nm

Fluorescent CsPbX₃ (X = Cl, Br, I) perovskite nanocrystals (NCs) are compelling candidates for illumination and display applications because of the high photoluminescence quantum yields (PLQYs) narrow PL emission spectra, and in particular, the potential to tune the emission spectra in the entire visible range. However, limited by the current preparation strategy, the successive adjustment of PL emission across the full visible spectral range with very small interval, like conventional semiconductor quantum dots, is still challenging. In this work, we demonstrate the capability to tune the PL emission of CsPbX₃ NCs in the full visible range with the interval of 1 nm on the basis of a modified anion-exchange route. Highly luminescent CsPbCl₃ NCs with PLQY up to 34.2% are foremost prepared using alkanoyl chlorides as the chlorine source and further employed to perform anion exchange. A successive and accurate adjustment of the PL emission is achieved with the addition of ZnX₂ (X = Br and I) aqueous solution and assisted by ultrasound to improve the reactivity of halogens in the anion exchange. Besides the accurately tunable PL emission position, the as-prepared CsPbX₃ NCs exhibit good phase/chemical stability, high PLQY, and narrow PL emission spectra.

Metal Halide Perovskite Nanocrystals: Synthesis, Post-Synthesis Modifications, and Their Optical Properties

Metal halide perovskites represent a flourishing area of research, which is driven by both their potential application in photovoltaics and optoelectronics and by the fundamental science behind their unique optoelectronic properties. The emergence of new colloidal methods for the synthesis of halide perovskite nanocrystals, as well as the interesting characteristics of this new type of material, has attracted the attention of many researchers. This review aims to provide an up-to-date survey of this fast-moving field and will mainly focus on the different colloidal synthesis approaches that have been developed. We will examine the chemistry and the capability of different colloidal synthetic routes with regard to controlling the shape, size, and optical properties of the resulting nanocrystals. We will also provide an up-to-date overview of their postsynthesis transformations, and summarize the various solution processes that are aimed at fabricating halide perovskite-based nanocomposites. Furthermore, we will review the fundamental optical properties of halide perovskite nanocrystals by focusing on their linear optical properties, on the effects of quantum confinement, and on the current knowledge of their exciton binding energies. We will also discuss the emergence of nonlinear phenomena such as multiphoton absorption, biexcitons, and carrier multiplication. Finally, we will discuss open questions and possible future directions.

Organic titanates: a model for activating rapid room-temperature synthesis of shape-controlled CsPbBr3 nanocrystals and their derivatives

We reported a new synthesis method of CsPbBr₃ NCs with the activation of organic titanates at room temperature. The morphology from nanoplates to nanocubes could be controlled by changing the kind of organic titanates.