Cobalt Pincer Complexes for Catalytic Reduction of Carboxylic Acid Esters

Catalytic Dehydrogenation of Formic Acid Promoted by Triphos-Co Complexes: Two Competing Pathways for H2 Production

In this study, we reported the synthesis and structural characterization of a triphos-CoII complex [(κ3-triphos)CoII(CH3CN)2]2+ (1) and a triphos-CoI-H complex [(κ2-triphos)HCoI(CO)2] (4). The facile synthetic pathways from 1 to [(κ3-triphos)CoII(κ2-O2CH)]+ (1') and [(κ3-triphos)CoI(CH3CN)]+ (2), respectively, as well as the interconversion between [(κ3-triphos)CoI(CO)2]+ (3) and 4 have been established. The activation energy barrier, associated with the dehydrogenation of a coordinated formate fragment in 1' yielding the corresponding 2 accompanied by the formation of H2 and CO2, was experimentally determined as 23.9 kcal/mol. With 0.01 mol % loading of 1, a maximum TON ∼ 1735 within 18 h and TOF ∼ 483 h-1 for the first 3 h could be achieved. Kinetic isotope effect (KIE) values of 2.25 (kHCOOH/kDCOOH) and 1.36 (kHCOOH/kHCOOD) for the dehydrogenation of formic acid and its deuterated derivatives, respectively, implicate that the H-COOH bond cleavage is likely the rate-determining step. The catalytic mechanism proposed by density functional theory (DFT) calculations coupled with experimental 1H NMR and gas chromatography-mass spectrometry (GC-MS) analysis unveils two competing pathways for H2 production; specifically, deprotonating a HCOO-H bond by a proposed Co-H intermediate C and homolytic cleavage of the CoII-H moiety of C, presumably via a dimeric Co intermediate D containing a [Co2(μ-H)2]2+ core, to yield the corresponding 2 and H2.

Bis(N-Heterocyclic Carbene) Manganese(I) Complexes: Efficient and Simple Hydrogenation Catalysts

The use of bis(NHC) manganese(I) complexes 3 as catalysts for the hydrogenation of esters was investigated. For that purpose, a series of complexes has been synthesized via an improved two step procedure utilizing bis(NHC)-BEt3 adducts. By applying complexes 3 with KHBEt3 as additive, various aromatic and aliphatic esters were hydrogenated successfully at mild temperatures and low catalyst loadings, highlighting the efficiency of the novel catalytic system. The versatility of the developed catalytic system was further demonstrated by the hydrogenation of other substrate classes like ketones, nitriles, N-heteroarenes and alkenes. Mechanistic experiments and DFT calculations indicate an inner sphere mechanism with the loss of one CO ligand and reveal the role of BEt3 as cocatalyst.

Organoaluminum hydrides catalyzed hydroboration of carbonates, esters, carboxylic acids, and carbon dioxide

The reductive functionalization of the CO unit of carbonates, carboxylic acids, esters, and CO₂, respectively has received great attention since its introduction. This method is often used industrially for the synthesis of high value-added energy products in chemistry. This opens up a new way forward to reduce greenhouse gases and the consumption of traditional energy sources. Herein, we report an earth-abundant, cheap, and readily available aluminum dihydride, which can catalyze the reduction of a range of carbonates, esters, carboxylic acids, and CO₂, respectively in the presence of pinacolborane as a reducing agent. Moreover, we demonstrate that the reaction can proceed to obtain good yield products under mild conditions, with low catalyst loading and solvent-free reactions. The mechanism of the catalytic reduction of carbonates has been investigated.

Catalytic and mechanistic studies of a highly active and E-selective Co(II) PNNH pincer catalyst system for transfer-semihydrogenation of internal alkynes

Herein we report the application of a Co(II) PNNH pincer catalyst system (PNNH = 2-(5-(t-butyl)-1H-pyrazol-3-yl)-6-(dialkylphosphinomethyl)pyridine) for the highly E-selective transfer semihydrogenation of internal diaryl alkynes using methanol and ammonia borane...

Hydrogenative Depolymerization of Silicon-modified Polyureas

Silicon-modified polyureas were depolymerized by hydrogenation in the presence of Ru and Mn catalysts. Yields of up to 84% of the aliphatic diamine and 81% of silicon-containing diamine were achieved...

Control of Catalyst Isomers Using an N-Phenyl-Substituted RN(CH2CH2PiPr2)2 Pincer Ligand in CO2 Hydrogenation and Formic Acid Dehydrogenation

A novel pincer ligand, ^iPrPN^PhP [PhN(CH₂CH₂PⁱPr₂)₂], which is an analogue of the versatile MACHO ligand, ^iPrPN^HP [HN(CH₂CH₂PⁱPr₂)₂], was synthesized and characterized. The ligand was coordinated to ruthenium, and a series of hydride-containing complexes were isolated and characterized by NMR and IR spectroscopies, as well as X-ray diffraction. Comparisons to previously published analogues ligated by ^iPrPN^HP and ^iPrPN^MeP [CH₃N(CH₂CH₂PⁱPr₂)₂] illustrate that there are large changes in the coordination chemistry that occur when the nitrogen substituent of the pincer ligand is altered. For example, ruthenium hydrides supported by the ^iPrPN^PhP ligand always form the syn isomer (where syn/anti refer to the relative orientation of the group on nitrogen and the hydride ligand on ruthenium), whereas complexes supported by ^iPrPN^HP form the anti isomer and complexes supported by ^iPrPN^MeP form a mixture of syn and anti isomers. We evaluated the impact of the nitrogen substituent of the pincer ligand in catalysis by comparing a series of ^iPrPN^RP (R = H, Me, Ph)-ligated ruthenium hydride complexes as catalysts for formic acid dehydrogenation and carbon dioxide (CO₂) hydrogenation to formate. The ^iPrPN^PhP-ligated species is the most active for formic acid dehydrogenation, and mechanistic studies suggest that this is likely because there are kinetic advantages for catalysts that operate via the syn isomer. In CO₂ hydrogenation, the ^iPrPN^PhP-ligated species is again the most active under our optimal conditions, and we report some of the highest turnover frequencies for homogeneous catalysts. Experimental and theoretical insights into the turnover-limiting step of catalysis provide a basis for the observed trends in catalytic activity. Additionally, the stability of our complexes enabled us to detect a previously unobserved autocatalytic effect involving the base that is added to drive the reaction. Overall, by modifying the nitrogen substituent on the MACHO ligand, we have developed highly active catalysts for formic acid dehydrogenation and CO₂ hydrogenation and also provided a framework for future catalyst development.

Advances in Nonprecious Metal Homogeneously Catalyzed Formic Acid Dehydrogenation

Formic acid (FA) possesses a high volumetric concentration of H2 (53 g L−1). Moreover, it can be easily prepared, stored, and transported. Therefore, FA stands out as a potential liquid organic hydrogen carrier (LOHC), which allows storage and transportation of hydrogen in a safe way. The dehydrogenation to produce H2 and CO2 competes with its dehydration to give CO and H2O. For this reason, research on selective catalytic FA dehydrogenation has gained attention in recent years. Several examples of highly active homogenous catalysts based on precious metals effective for the selective dehydrogenation of FA have been reported. Among them are the binuclear iridium-bipyridine catalysts described by Fujita and Himeda et al. (TOF = 228,000 h−1) and the cationic species [IrClCp*(2,2′-bi-2-imidazoline)]Cl (TOF = 487,500 h−1). However, examples of catalytic systems effective for the solventless dehydrogenation of FA, which is of great interest since it allows to reduce the reaction volume and avoids the use of organic solvents that could damage the fuel cell, are scarce. In this context, the development of transition metal catalysts based on cheap and easily available nonprecious metals is a subject of great interest. This work contains a summary on the state of the art of catalytic dehydrogenation of FA in homogeneous phase, together with an account of the catalytic systems based on non-precious metals so far reported.

Fatty Acids and their Derivatives as Renewable Platform Molecules for the Chemical Industry

Oils and fats of vegetable and animal origin remain an important renewable feedstock for the chemical industry. Their industrial use has increased during the last 10 years from 31 to 51 million tonnes annually. Remarkable achievements made in the field of oleochemistry in this timeframe are summarized herein, including the reduction of fatty esters to ethers, the selective oxidation and oxidative cleavage of C-C double bonds, the synthesis of alkyl-branched fatty compounds, the isomerizing hydroformylation and alkoxycarbonylation, and olefin metathesis. The use of oleochemicals for the synthesis of a great variety of polymeric materials has increased tremendously, too. In addition to lipases and phospholipases, other enzymes have found their way into biocatalytic oleochemistry. Important achievements have also generated new oil qualities in existing crop plants or by using microorganisms optimized by metabolic engineering.

Ester Hydrogenation with Bifunctional Metal-NHC Catalysts: Recent Advances

Hydrogenation of ester to alcohol is an essential reaction in organic chemistry due to its importance in the production of a wide range of bulk and fine chemicals. There are a number of homogeneous and heterogeneous catalyst systems reported in the literature for this useful reaction. Mostly, phosphine-based bifunctional catalysts, owing to their ability to show metal-ligand cooperation during catalytic reactions, are extensively used in these reactions. However, phosphine-based catalysts are difficult to synthesize and are also highly air- and moisture-sensitive, restricting broad applications. In contrast, N-heterocyclic carbenes (NHCs) can be easily synthesized, and their steric and electronic attributes can be fine-tuned easily. In recent times, many phosphine ligands have been replaced by potent σ-donor NHCs, and the resulting bifunctional metal-ligand systems are proven to be very efficient in several important catalytic reactions. This mini-review focuses the recent advances mainly on bifunctional metal-NHC complexes utilized as (pre)catalysts in ester hydrogenation reactions.

Co(I) complexes with a tetradentate phenanthroline-based PNNP ligand as a potent new metal-ligand cooperation platform

A series of low spin cobalt(i) complexes bearing a tetradentate phenanthroline-based PNNP ligand (2,9-bis((diphenylphosphanyl)methyl)-1,10-phenanthroline), [CoCl(PNNP)] (1), [CoMe(PNNP)] (2) and [Co(CH2SiMe3)(PNNP)] (3), were synthesized and structurally identified. Complex 3 underwent a structural rearrangement of the PNNP skeleton upon heating to form [Co(PNNP')] (4), which is supported by an asymmetrical PNNP' ligand with a dearomatized phenanthroline backbone. Mechanistic studies supported that the transformation from 3 to 4 was initiated by the homolysis of either a Co-CH2SiMe3 bond or a benzylic C-H bond. Complex 4 achieved H-H bond cleavage of H2 (1 atm) at ambient temperature, to form [Co(PNNP'')] (6), in which two H atoms were incorporated into the endocyclic double bond of the PNNP'' ligand backbone.

Cobalt-catalysed selective synthesis of aldehydes and alcohols from esters

Efficient and selective reduction of esters to aldehydes and alcohols is reported in which a simple cobalt pincer catalyst catalyses both transformations using diethylsilane as a reductant. Remarkably, the reaction selectivity is controlled by the stoichiometry of diethylsilane.

Rhodium-catalyzed reductive carbonylation of aryl iodides to arylaldehydes with syngas

The reductive carbonylation of aryl iodides to aryl aldehydes possesses broad application prospects. We present an efficient and facile Rh-based catalytic system composed of the commercially available Rh salt RhCl3·3H2O, PPh3 as phosphine ligand, and Et3N as the base, for the synthesis of arylaldehydes via the reductive carbonylation of aryl iodides with CO and H2 under relatively mild conditions with a broad substrate range affording the products in good to excellent yields. Systematic investigations were carried out to study the experimental parameters. We explored the optimal ratio of Rh salt and PPh3 ligand, substrate scope, carbonyl source and hydrogen source, and the reaction mechanism. Particularly, a scaled-up experiment indicated that the catalytic method could find valuable applications in industrial productions. The low gas pressure, cheap ligand and low metal dosage could significantly improve the practicability in both chemical researches and industrial applications.

A simple cobalt-based catalyst system for the controlled dehydropolymerisation of H3B·NMeH2 on the gram-scale

A simple Co-based catalyst system promotes the efficient and controlled dehydropolymerisation of amine–boranes on scale.

Strategies and mechanisms of metal–ligand cooperativity in first-row transition metal complex catalysts

The use of metal–ligand cooperation (MLC) by transition metal bifunctional catalysts has emerged at the forefront of homogeneous catalysis science.

Chemoselective semihydrogenation of alkynes catalyzed by manganese(i)-PNP pincer complexes

A first homogeneous manganese catalyzed chemoselective semihydrogenation of alkynes to Z-olefins in the presence of molecular hydrogen is described.

Mechanistic insights into the non-bifunctional hydrogenation of esters by Co(ii) pincer complexes: a DFT study

A recent experiment has revealed that additive free ester hydrogenation by Co-pincer complexes might follow an unusual non-bifunctional mechanism, however, the detailed mechanistic pathway is missing. It has been predicted that several intermediates and transition states are involved, having their essential role in the catalytic performances. Detailed theoretical studies are therefore essential in this regard for achieving more efficient ester hydrogenation catalysts. On the basis of first principles calculations, performed over Co(PNP)/(PNN) complexes, we present here the energetics and mechanistic details, showing the distinct orientations of different possible intermediates and transition states, and find the minimum energy pathway for the conversion of esters to alcohols. In the way, we find that some intermediates must undergo structural distortion for achieving the lowest potential energy barrier which must have a severe impact on the catalytic turnover frequency.

Liquid-Phase Hydrogenation of Nitriles to Amines Facilitated by a Co(II)/Zn(0) Pair: A Ligand-Free Catalytic Protocol

The given report introduces a simple and user-friendly in situ method for the production of catalytically active cobalt particles. The approach circumvents the use of air- and moisture-sensitive reductants as well as the application of anhydrous Co-precursor salts. Accordingly, the described catalytic system is readily assembled under open-flask conditions by simply combining the components in the reaction vessel. Therefore, the arduous charging procedure of the reaction autoclave in a glovebox under an inert gas atmosphere is no longer necessary. In fact, the catalytically active material is obtained upon treatment of readily available Co(OAc)₂·4 H₂O with benign commercial Zn powder. The catalytic performance of the resultant material was tested in the heterogeneous hydrogenation of nitriles to the corresponding primary amines. Both activity and selectivity of the cobalt catalyst are significantly enhanced if a triflate-based Lewis acid and ammonia is added to the reaction mixture.

Preparation and Study of Reusable Polymerized Catalysts for Ester Hydrogenation

A cross-linked catalyst organic framework was prepared by an alternating ring-opening olefin metathesis polymerization between dichloro{N,N'-bis({(2-diphenylphosphino)phenyl}methylidene)bicyclo[2.2.1]-hept-5-ene-2,3-diamine}ruthenium, 1,2-N-di(cis-5-norbornene-2,3-endo-dicarboximido)-ethane, and cis-cyclooctene catalyzed by RuCl₂(=CHPh)(PCy₃)₂ in the presence of a BaSO₄ support. The heterogenized catalyst hydrogenated methyl benzoate at a similar rate to the homogeneous catalyst (0.0025 mol % catalyst, 10 mol % KO ^t Bu, 80 °C, 50 atm, tetrahydrofuran, 21 h, ∼15 000 turnovers during the first 1 h). The catalyst was used five times for a total of 121 680 turnovers. A study on the reusability of this catalyst showed that ester hydrogenations with bifunctional catalysts slow as the reaction proceeds. This inhibition is removed by isolating and reusing the catalyst, suggesting that future catalyst design should emphasize avoiding product inhibition.

Cobalt-Catalyzed Aqueous Dehydrogenation of Formic Acid

Among the known liquid organic hydrogen carriers, formic acid attracts increasing interest in the context of safe and reversible storage of hydrogen. Here, the first molecularly defined cobalt pincer complex is disclosed for the dehydrogenation of formic acid in aqueous medium under mild conditions. Crucial for catalytic activity is the use of the specific complex 3. Compared to related ruthenium and manganese complexes 7 and 8, this optimal cobalt complex showed improved performance. DFT computations support an innocent non-classical bifunctional outer-sphere mechanism on the triplet state potential energy surface.

Additive-Free Isomerization of Allylic Alcohols to Ketones with a Cobalt PNP Pincer Catalyst

Catalytic isomerization of allylic alcohols in ethanol as a green solvent was achieved by using air and moisture stable cobalt (II) complexes in the absence of any additives. Under mild conditions, the cobalt PNP pincer complex substituted with phenyl groups on the phosphorus atoms appeared to be the most active. High rates were obtained at 120 °C, even though the addition of one equivalent of base increases the speed of the reaction drastically. Although some evidence was obtained supporting a dehydrogenation-hydrogenation mechanism, it was proven that this is not the major mechanism. Instead, the cobalt hydride complex formed by dehydrogenation of ethanol is capable of double-bond isomerization through alkene insertion-elimination.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Cobalt pincer complexes for catalytic reduction of nitriles to primary amines

An efficient cobalt pincer type complex catalyzes the hydrogenation of nitriles to amines under mild conditions with high yields.

Towards practical earth abundant reduction catalysis: design of improved catalysts for manganese catalysed hydrogenation

Rational design using kinetic studies has led to a 3-fold-increase in the reaction-rates compared to an already-promising lead catalyst for the reduction of ketones and esters.

Phosphine-free cobalt catalyst precursors for the selective hydrogenation of olefins

A phosphine-free Co(NNS)Cl₂ complex was used as a catalyst precursor for the highly selective hydrogenation of alkenes in the presence of other functional groups such as ketones.

First-Row Transition Metal (De)Hydrogenation Catalysis Based On Functional Pincer Ligands

The use of 3d metals in de/hydrogenation catalysis has emerged as a competitive field with respect to "traditional" precious metal catalyzed transformations. The introduction of functional pincer ligands that can store protons and/or electrons as expressed by metal-ligand cooperativity and ligand redox-activity strongly stimulated this development as a conceptual starting point for rational catalyst design. This review aims at providing a comprehensive picture of the utilization of functional pincer ligands in first-row transition metal hydrogenation and dehydrogenation catalysis and related synthetic concepts relying on these such as the hydrogen borrowing methodology. Particular emphasis is put on the implementation and relevance of cooperating and redox-active pincer ligands within the mechanistic scenarios.

Cobalt-Pincer Complexes in Catalysis

Non-noble metal catalysts based on pincer type compounds are of special interest for organometallic chemistry and organic synthesis. Next to iron and manganese, currently cobalt-pincer type complexes are successfully applied in various catalytic reactions. In this review the recent progress in (de)hydrogenation, transfer hydrogenation, hydroboration and hydrosilylation as well as dehydrogenative coupling reactions using cobalt-pincer complexes is summarised.