Nitrogen-Functionalized Hydrothermal Carbon Materials by Using Urotropine as the Nitrogen Precursor

Functionalized Amorphous Carbon Materials via Reactive Molecular Dynamics Simulations

We derive a database of atomistic structural models of amorphous carbon materials endowed with exohedral functional groups. We start from phases previously derived using the DynReaxMas method for reactive molecular dynamics simulations, which exhibit atomistic and medium-length-scale features in excellent agreement with available experimental data. Given a generic input structure/phase, we develop postprocessing simulation algorithms mimicking experimental preparation protocols aimed at: (1) "curing" the phase to decrease the defect concentration; (2) automatically selecting the most reactive carbon atoms via interaction with a probe molecular species, and (3) stabilizing the phase by saturating the valence of carbon atoms with single-bond functional groups. Although we focus on oxygen-bearing functionalities, they can be replaced with other monovalent groups, such as -H, -COOH, -CHO, so that the protocol is quite general. We finally classify reactive sites in terms of their location within the structural framework and coordination environment (edges, tunnels, rings, aromatic carbons becoming aliphatic) and try to single out descriptors that correlate with tendency to functionalization.

Electrocatalytic Coupling of Nitrate and Formaldehyde for Hexamethylenetetramine Synthesis via C-N Bond Construction and Ring Formation

Hexamethylenetetramine (HMTA) is extensively used in the defense industry, medicines, food, plastics, rubber, and other applications. Traditional organic synthesis of HMTA relies on ammonia derived from the Haber process at high temperatures and pressures. In contrast, electrochemical methods enable a safe and green one-pot synthesis of HMTA from waste NO3-. However, HMTA synthesis through the electrochemical method is challenging owing to the complex reaction pathways involving C-N bond construction and ring formation. In this study, HMTA was efficiently synthesized over electrochemical oxidation-derived copper (e-OD-Cu), with a yield of 76.8% and a Faradaic efficiency of 74.9% at -0.30 VRHE. The catalytic mechanism and reaction pathway of HMTA synthesis on e-OD-Cu were investigated through a series of in situ characterization methods and density-functional theory calculations. The results demonstrated that the electrocatalytic synthesis of HMTA involved a tandem electrochemical-chemical reaction. Additionally, the results indicated that the presence of Cu vacancies enhanced substrate adsorption and inhibited the further hydrogenation of C═N. Overall, this study provides an electrocatalytic method for HMTA synthesis and an electrochemical strategy for constructing multiple C-N bonds.

Biomass-Derived Carbon Materials in Heterogeneous Catalysis: A Step towards Sustainable Future

Biomass-derived carbons are emerging materials with a wide range of catalytic properties, such as large surface area and porosity, which make them ideal candidates to be used as heterogeneous catalysts and catalytic supports. Their unique physical and chemical properties, such as their tunable surface, chemical inertness, and hydrophobicity, along with being environmentally friendly and cost effective, give them an edge over other catalysts. The biomass-derived carbon materials are compatible with a wide range of reactions including organic transformations, electrocatalytic reactions, and photocatalytic reactions. This review discusses the uses of materials produced from biomass in the realm of heterogeneous catalysis, highlighting the different types of carbon materials derived from biomass that are potential catalysts, and the importance and unique properties of heterogeneous catalysts with different preparation methods are summarized. Furthermore, this review article presents the relevant work carried out in recent years where unique biomass-derived materials are used as heterogeneous catalysts and their contribution to the field of catalysis. The challenges and potential prospects of heterogeneous catalysis are also discussed.

Characteristics of Hydrochar and Liquid Products Obtained by Hydrothermal Carbonization and Wet Torrefaction of Poultry Litter in Mixture with Wood Sawdust

Poultry farms with floor-standing poultry generate large amounts of poultry litter waste. The direct application of this waste as an organic fertilizer does not ensure sustainable and cost-efficient utilization of all waste fractions, and can also be linked to environmental hazards. Therefore, the development of new technologies is required for processing poultry litter into a safe product with higher added value. In this work, the characteristics of activated carbon derived from hydrochar, along with the liquid products obtained from hydrothermal carbonization (HTC) and the wet torrefaction (WT) of poultry litter, were investigated. Poultry litter (PL) was applied in a mixture with sawdust (SD) in the following ratios: 1:0 (PL/SD 1:0), 1:1 (PL/SD 1:1), 1:2 (PL/SD 1:2), and 2:1 (PL/SD 2:1). WT processing took place in an innovative fluidized bed system in a superheated steam medium with low overpressure (less than 0.07 MPa) at 300 °C and 350 °C for 30–45 min. Conventional HTC processing was performed in a water medium at 220 °C for 1–4 h. The hydrochar produced in the experiments was activated with steam for 1 h at 450–750 °C. The porosity characteristics of activated hydrochar were measured, including pore size, pore volume, and specific surface area, in view of potential industrial applications as an adsorbent. Additionally, the contents of 5-hydroxymethylfurfural (HMF), as high-value product, were determined in the liquid products obtained from HTC processing, as well as in the condensate obtained after WT processing. Specific surface areas of the activated hydrochars may still be too low for application as adsorbent material. Hence, its use as a biofertilizer and soil improver should be preferred. Interestingly, the liquid fraction obtained from the innovative WT process displayed a significantly higher 5-HMF content compared to the conventional HTC process.

Wet Torrefaction of Poultry Litter in a Pilot Unit: A Numerical Assessment of the Process Parameters

A numerical model for the wet torrefaction of poultry litter in a pilot unit was developed in this study. The model accounted for the following process steps: preheating biomass in a feed hopper, feeding biomass into the reactor, fluidized-bed generation using superheated steam, and the supply of additional heat by the electric heating of the reactor walls. Following a “black box” approach, a major assumption of the model is that the behavior of the fluidized-bed reactor is similar to a completely stirred tank reactor (CSTR). Under this assumption, the properties of the particles and gases do not depend on their location inside the reactor. During wet torrefaction, poultry-litter biomass was heated to a predetermined temperature and decomposed, generating biochar along with a gas phase (torgas), whose amounts depended on the content of inert ash in the biomass particles. Variable optimization in the model was performed using MATLAB software. The model successfully estimated the optimal duration required for the completion of wet torrefaction under various conditions: temperature, batch weight, reactor dimensions, etc. The model was validated using experimental data obtained from a series of wet torrefaction experiments performed in a fluidized bed, and provided reliable estimations of the duration of the process depending on material properties, reactor size and feedstock characteristics.

One-step synthesis of nitrogen-grafted copper-gallic acid for enhanced methylene blue removal

Nitrogen-grafting through the addition of glycine (Gly) was performed on a metal- phenolic network (MPN) of copper (Cu²⁺) and gallic acid (GA) to increase its adsorption capacity. Herein, we reported a one-step synthesis method of MPN, which was developed according to the metal–ligand complexation principle. The nitrogen grafted CuGA (N_g-CuGA) MPN was obtained by reacting Cu²⁺, GA, and Gly in an aqueous solution at a molar ratio of 1:1:1 and a pH of 8. Several physicochemical measurements, such as Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), N₂ sorption, X-ray diffraction (XRD), and thermal gravimetry analysis (TGA), were done on N_g-CuGA to elucidate its characteristics. The analysis revealed that the N_g-CuGA has non-uniform spherical shaped morphology with a pore volume of 0.56 cc/g, a pore size of 23.25 nm, and thermal stability up to 205 °C. The applicational potential of the N_g-CuGA was determined based on its adsorption capacity against methylene blue (MB). The N_g-CuGA was able to adsorb 190.81 mg MB per g adsorbent at a pH of 6 and temperature of 30 °C, which is 1.53 times higher than the non-grafted CuGA. Detailed assessment of N_g-CuGA adsorption properties revealed their pH- and temperature-dependent nature. The adsorption capacity and affinity were found to decrease at a higher temperature, demonstrating the exothermic adsorption behavior.

Nitrogen-Functionalized Hydrothermal Carbon Materials by Using Urotropine as the Nitrogen Precursor

Nitrogen-containing hydrothermal carbon (N-HTC) materials of spherical particle morphology were prepared by means of hydrothermal synthesis with glucose and urotropine as precursors. The molar ratio of glucose to urotropine has been varied to achieve a continuous increase in nitrogen content. By raising the ratio of urotropine to glucose, a maximal nitrogen fraction of about 19 wt % could be obtained. Decomposition products of both glucose and urotropine react with each other; this opens up a variety of possible reaction pathways. The pH has a pronounced effect on the reaction pathway of the corresponding reaction steps. For the first time, a comprehensive analytical investigation, comprising a multitude of analytical tools and instruments, of a series of nitrogen-containing HTC materials was applied. Functional groups and structural motifs identified were analyzed by means of FTIR spectroscopy, thermogravimetric MS, and solid-state NMR spectroscopy. Information on reaction mechanisms and structural details were obtained by electronic structure calculations that were compared with vibrational spectra of polyfuran or polypyrrole-like groups, which represent structural motifs occurring in the present samples.