Carbon-based nanozymes: design, catalytic mechanisms, and environmental applications

Carbon-based nanozymes are synthetic nanomaterials that are predominantly constituted of carbon-based materials, which mimic the catalytic properties of natural enzymes, boasting features such as tunable catalytic activity, robust regenerative capacity, and exceptional stability. Due to the impressive enzymatic performance similar to various enzymes such as peroxidase, superoxide dismutase, and oxidase, they are widely used for detecting and degrading pollutants in the environment. This paper presents an exhaustive review of the fundamental design principles, catalytic mechanisms, and prospective applications of carbon-based nanozymes in the environmental field. These studies not only serve to augment the comprehension on the intricate operational mechanism inherent in these synthetic nanostructures, but also provide essential guidelines and illuminating perspectives for advancing their development and practical applications. Future studies that are imperative to delve into the untapped potential of carbon-based nanozymes within the environmental domain was needed to be explored to fully harness their ability to deliver broader and more impactful environmental preservation and management outcomes.

Accelerating the Phosphatase-like Activity of Uio-66-NH2 by Catalytically Inactive Metal Ions and Its Application for Improved Fluorescence Detection of Cardiac Troponin I

Compared with natural enzymes, nanozymes usually exhibit much lower catalytic activities, which limit the sensitivities of nanozyme-based immunoassays. Herein, several metal ions without enzyme-like activities were engineered onto Uio-66-NH2 nanozyme through postsynthetic modification. The obtained Mn+@Uio-66-NH2 (Mn+ = Zn2+, Cd2+, Co2+, Ca2+and Ni2+) exhibited improved phosphatase-like catalytic activities. In particular, a 12-fold increase in the catalytic efficiency (kcat/Km) of Uio-66-NH2 was observed after the modification with Zn2+. Mechanism investigations indicate that both the amino groups and oxygen-containing functional groups in Uio-66-NH2 are the binding sites of Zn2+, and the modified Zn2+ ions on Uio-66-NH2 serve as the additional catalytic sites for improving the catalytic performance. Furthermore, the highly active Zn2+@Uio-66-NH2 was used as a nanozyme label to develop a fluorescence immunoassay method for the detection of cardiac troponin I (cTnI). Compared with pristine Uio-66-NH2, Zn2+@Uio-66-NH2 can widen the linear range by 1 order of magnitude (from 10 pg/mL-1 μg/mL to 1 pg/mL-1 μg/mL) and also lower the detection limit by 5 times (from 4.7 pg/mL to 0.9 pg/mL).

Reactive oxygen nanobiocatalysts: activity-mechanism disclosures, catalytic center evolutions, and changing states

Benefiting from low costs, structural diversities, tunable catalytic activities, feasible modifications, and high stability compared to the natural enzymes, reactive oxygen nanobiocatalysts (RONBCs) have become dominant materials in catalyzing and mediating reactive oxygen species (ROS) for diverse biomedical and biological applications. Decoding the catalytic mechanism and structure-reactivity relationship of RONBCs is critical to guide their future developments. Here, this timely review comprehensively summarizes the recent breakthroughs and future trends in creating and decoding RONBCs. First, the fundamental classification, activity, detection method, and reaction mechanism for biocatalytic ROS generation and elimination have been systematically disclosed. Then, the merits, modulation strategies, structure evolutions, and state-of-art characterisation techniques for designing RONBCs have been briefly outlined. Thereafter, we thoroughly discuss different RONBCs based on the reported major material species, including metal compounds, carbon nanostructures, and organic networks. In particular, we offer particular insights into the coordination microenvironments, bond interactions, reaction pathways, and performance comparisons to disclose the structure-reactivity relationships and mechanisms. In the end, the future challenge and perspectives for RONBCs are also carefully summarised. We envision that this review will provide a comprehensive understanding and guidance for designing ROS-catalytic materials and stimulate the wide utilisation of RONBCs in diverse biomedical and biological applications.

A new Schiff base derived from 5-(thiophene-2-yl)oxazole as "off-on-off" fluorescence sensor for monitoring indium and ferric ions sequentially and its application

A new Schiff base sensor (E)-N'-((8-hydroxy-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-9-yl)methylene)-5-(thiophen-2-yl)oxazole-4-carbohydrazide (TOQ) was synthesized and found to emit yellowish green fluorescence upon introduction of In³⁺. Furthermore, the resulting complex TOQ-In³⁺ was quenched selectively by Fe³⁺. The detection limits of TOQ for In³⁺ and Fe³⁺ were 1.75 × 10^-10 M and 8.45 × 10^-9 M, respectively. The complex stoichiometry of TOQ with target ions was determined to be 1:2 via Job's plot analysis, which further was verified by ESI-MS titration and theoretical calculations. Moreover, TOQ can be used for the determination of target ions in environmental water samples. A portable paper sensor of TOQ was successfully developed for detecting In³⁺ to assess its applicability.

Ultrasensitive determination of α-glucosidase activity using CoOOH nanozymes and its application to inhibitor screening

In this work, a novel method for the colorimetric sensing of α-glucosidase (α-Glu) activity was developed based on CoOOH nanoflakes (NFs), which exhibit efficient oxidase-mimicking activity. Colorless 3,3',5,5'-tetramethylbenzidine (TMB) can be oxidized by CoOOH NFs into blue-colored oxidized TMB (oxTMB) in the absence of H₂O₂. L-Ascorbic acid-2-O-α-D-glucopyranose (AAG) can be hydrolysed by α-glucosidase to produce ascorbic acid, resulting in a significant decrease of catalytic activity of CoOOH NFs. Thus, a colorimetric α-glucosidase activity detection method was designed with a limit of detection of 0.0048 U mL^-1. Furthermore, the designed sensing platform exhibits favorable applicability for the α-glucosidase (α-Glu) activity assay in real samples. Meanwhile, this method can be expanded to study the inhibitors of α-Glu. Finally, the as-proposed method combined with a smartphone would be a color recognizer, which was successfully applied for the determination of α-Glu activity in human serum samples.

Engineering efficient artificial nanozyme based on chitosan grafted Fe-doped-carbon dots for bacteria biofilm eradication

Bacterial biofilms have evoked worldwide attention owing to their serious threats to public health, but how to effectively eliminate bacterial biofilms still remains great challenges. Here, we rationally designed a novel and vigorous chitosan grafted Fe-doped-carbon dots (CS@Fe/CDs) as an efficient artificial nanozyme to combat rigid bacterial biofilms through the selective activation of Fenton-like reaction-triggered peroxidase-like catalytic activity and the synergistic antibacterial activity of CS. On the one hand, the peroxidase-like catalytic activity made CS@Fe/CDs catalyze H₂O₂ for producing hydroxyl radicals (•OH), resulting in efficient cleavage of extracellular DNA (eDNA). On the other hand, CS was capable of binding with the negatively charged cell membrane through electrostatic interaction, changing the cell membrane permeability and causing cell death within bacterial biofilms. Based on their synergistic effects, the fragments of bacterial biofilm and exposed bacteria were persistently eradicated. Remarkably, CS@Fe/CDs-based nanozyme not only enabled the effective destroying of gram-positive Staphylococcus aureus (S. aureus) biofilms, but also completely eliminated gram-negative Pseudomonas aeruginosa (P. aeruginosa) biofilms, showing great potential as a promising anti-biofilm agent against bacteria biofilms. This proposed synergistic strategy for bacterial biofilm eradication might offer a powerful modality to manage of bacterial biofilm fouling in food safety and environmental protection.

CoOOH nanosheets ensure ratiometric fluorescence assay of acetylcholinesterase

Cobalt oxyhydroxide nanosheets (CoOOH) with peroxidase-like activity provide a promising probe for acetylcholinesterase (AChE) sensing through a ratiometric fluorescence strategy. Fluorescence of silicon quantum dots (SiQDs) at 457 nm was quenched by CoOOH on account of inner-filter effect (IFE). Meanwhile, the nonfluorescent o-phenylenediamine (OPD) was catalytically oxidized to 2,3-diaminophenazine (oxOPD) by CoOOH nanosheets with emission at 572 nm. The acetylcholine (ATCh) was catalytically hydrolyzed by AChE to enzymatic thiocholine (TCh), which decomposed CoOOH to Co²⁺, recovered the fluorescence of SiQDs and reduced the emission of oxOPD. Fluorescence ratio at F₄₅₇/F₅₇₂ serves as signal output for AChE detection within 5 × 10^-5-0.05 and 0.05-10 U mL^-1, with a limit of detection (LOD) of 3.2 × 10^-5 U mL^-1. The sensing strategy was applied for AChE assay in human blood and erythrocyte.

Highly stable and tunable peptoid/hemin enzymatic mimetics with natural peroxidase-like activities

Developing tunable and stable peroxidase mimetics with high catalytic efficiency provides a promising opportunity to improve and expand enzymatic catalysis in lignin depolymerization. A class of peptoid-based peroxidase mimetics with tunable catalytic activity and high stability is developed by constructing peptoids and hemins into self-assembled crystalline nanomaterials. By varying peptoid side chain chemistry to tailor the microenvironment of active sites, these self-assembled peptoid/hemin nanomaterials (Pep/hemin) exhibit highly modulable catalytic activities toward two lignin model substrates 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and 3,3’,5,5’-tetramethylbenzidine. Among them, a Pep/hemin complex containing the pyridyl side chain showed the best catalytic efficiency (V_max/K_m = 5.81 × 10⁻³ s⁻¹). These Pep/hemin catalysts are highly stable; kinetics studies suggest that they follow a peroxidase-like mechanism. Moreover, they exhibit a high efficacy on depolymerization of a biorefinery lignin. Because Pep/hemin catalysts are highly robust and tunable, we expect that they offer tremendous opportunities for lignin valorization to high value products.

Peroxidase mimics are currently being investigated as catalysts for lignin depolymerisation. In this article, the authors investigate a class of self-assembled and highly stable peptoid/hemin nanomaterials as peroxidase mimics that are highly stable and tuneable for the depolymerisation of a biorefinery lignin.

Engineering single-atom catalysts toward biomedical applications

Due to inherent structural defects, common nanocatalysts always display limited catalytic activity and selectivity, making it practically difficult for them to replace natural enzymes in a broad scope of biologically important applications. By decreasing the size of the nanocatalysts, their catalytic activity and selectivity will be substantially improved. Guided by this concept, the advances of nanocatalysts now enter an era of atomic-level precise control. Single-atom catalysts (denoted as SACs), characterized by atomically dispersed active sites, strikingly show utmost atomic utilization, precisely located metal centers, unique metal-support interactions and identical coordination environments. Such advantages of SACs drastically boost the specific activity per metal atom, and thus provide great potential for achieving superior catalytic activity and selectivity to functionally mimic or even outperform natural enzymes of interest. Although the size of the catalysts does matter, it is not clear whether the guideline of "the smaller, the better" is still correct for developing catalysts at the single-atom scale. Thus, it is clearly a new, urgent issue to address before further extending SACs into biomedical applications, representing an important branch of nanomedicine. This review begins by providing an overview of recent advances of synthesis strategies of SACs, which serve as a basis for the discussion of emerging achievements in improving the enzyme-like catalytic properties at an atomic level. Then, we carefully compare the structures and functions of catalysts at various scales from nanoparticles, nanoclusters, and few-atom clusters to single atoms. Contrary to conventional wisdom, SACs are not the most catalytically active catalysts in specific reactions, especially those requiring multi-site auxiliary activities. After that, we highlight the unique roles of SACs toward biomedical applications. To appreciate these advances, the challenges and prospects in rapidly growing studies of SACs-related catalytic nanomedicine are also discussed in this review.

Rational construction of a robust metal-organic framework nanozyme with dual-metal active sites for colorimetric detection of organophosphorus pesticides

While nanomaterials with enzyme-mimicking activities are emerging as promising candidates in the colorimetric detection of organophosphorus pesticides (OPs), the catalytic activities and recognition ability to analyte of most nanozymes are inherently deficient. In this work, we introduced manganese ions into a typical iron based MOF (Fe-MIL(53)) via a one-pot hydrothermal reaction strategy, which brought out a catalytically favorable bimetallic Mn/Fe-MIL(53) MOF nanozyme. The catalytic performance of Mn/Fe-MIL(53) is superior to that of pure Fe-MIL (53) and the mechanism for superior catalytic activity of material is revealed by active species scavenging experiments and X-ray photoelectron spectroscopy (XPS). Besides, the introduction of manganese endows the material with the characteristic of being specially destroyed by choline, which motivates the establishment of a simple, selective and sensitive colorimetric strategy for OPs detection. The proposed colorimetric strategy could quantify the methyl parathion and chlorpyrifos in the concentration range of 10-120 nM and 5-50 nM, respectively. The low detection limit of 2.8 nM for methyl parathion and 0.95 nM (3 S/N) for chlorpyrifos were achieved. Good recoveries were obtained when applied in the real sample detection. Our work paves the way to boost catalytic performance of MOF nanozymes, which will be useful in biosensing.

Magnetic Nanostructures: Rational Design and Fabrication Strategies toward Diverse Applications

In recent years, the continuous development of magnetic nanostructures (MNSs) has tremendously promoted both fundamental scientific research and technological applications. Different from the bulk magnet, the systematic engineering on MNSs has brought a great breakthrough in some emerging fields such as the construction of MNSs, the magnetism exploration of multidimensional MNSs, and their potential translational applications. In this review, we give a detailed description of the synthetic strategies of MNSs based on the fundamental features and application potential of MNSs and discuss the recent progress of MNSs in the fields of nanomedicines, advanced nanobiotechnology, catalysis, and electromagnetic wave adsorption (EMWA), aiming to provide guidance for fabrication strategies of MNSs toward diverse applications.

Chiral FexCuySe nanoparticles as peroxidase mimics for colorimetric detection of 3, 4-dihydroxy-phenylalanine enantiomers

L-3,4-dihydroxy-phenylalanine (L-dopa) is the most widely used drug in Parkinson's disease treatment. However, development of cost-effective and high-throughput sensors to accurate enantioselective discrimination of L-dopa and D-dopa remains challenging to date. Herein, on the basis of the peroxidase-mimic activity of chiral Fe_xCu_ySe nanoparticles, we demonstrated a novel colorimetric sensor for determination of chiral dopa. The surface chiral ligand, L/D-histidine (L/D-His), endowed the nanozymes with enantioselectivity in catalyzing the oxidation of dopa enantiomers. According to the values ofk_cat/K_m, the efficiency of L-His modified nanoparticles (L-Fe_xCu_ySe NPs) towards L-dopa was 1.56 times higher than that of D-dopa. While, D-His can facilely reverse the preference of the nanozyme to D-dopa. On the basis of high catalytic activity and enantioselectivity of L-Fe_xCu_ySe NPs in oxidation of L-dopa, the L-Fe_xCu_ySe NPs-based system can be utilized for detection of L-dopa. The linear ranges for L-dopa determination were 5μM-0.125 mM and 0.125 mM-1 mM with a detection limit of 1.02μM. Critically, the developed sensor has been successfully applied in the quality control of clinical used L-dopa tablets. Our work sheds light on developing simple and sensitive chiral nanomaterials-based sensors for drug analysis.

Recent advances in enzyme-enhanced immunosensors

Among the products for rapid detection in different fields, enzyme-based immunosensors have received considerable attention. Recently, great efforts have been devoted to enhancing the output signals of enzymes through different strategies that can significantly improve the sensitivity of enzyme-based immunosensors for the need of practical applications. In this manuscript, the significance of enzyme-based signal transduction patterns in immunoassay and the central role of enzymes in achieving precise control of reaction systems are systematically described. In view of the rapid development of this field, we classify these strategies based on the combination of immune recognition and enzyme amplification into three categories, namely enzyme-based enhancement strategies, combination of the catalytic amplification of enzymes with other signal amplification methods, and substrate-based enhancement strategies. The current focus and future direction of enzyme-based immunoassays are also discussed. This article is not exhaustive, but focuses on the latest advances in different signal generation methods based on enzyme-initiated catalytic reactions and their applications in the detection field, which could provide an accessible introduction of enzyme-based immunosensors for the community with a view to further improving its application efficiency.

Nanozyme Catalytic Turnover and Self-Limited Reactions

Enzymes have catalytic turnovers. The field of nanozyme endeavors to engineer nanomaterials as enzyme mimics. However, a discrepancy in the definition of "nanozyme concentration" has led to an unrealistic calculation of nanozyme catalytic turnovers. To date, most of the reported works have considered either the atomic concentration or nanoparticle (NP) concentration as nanozyme concentration. These assumptions can lead to a significant under- or overestimation of the catalytic activity of nanozymes. In this article, we review some classic nanozymes including Fe₃O₄, CeO₂, and gold nanoparticles (AuNPs) with a focus on the reported catalytic activities. We argue that only the surface atoms should be considered as nanozyme active sites, and then the turnover numbers and rates were recalculated based on the surface atoms. According to the calculations, the catalytic turnover of peroxidase Fe₃O₄ NPs is validated. AuNPs are self-limited when performing glucose-oxidase like activity, but they are also true catalysts. For CeO₂ NPs, a self-limited behavior is observed for both oxidase- and phosphatase-like activities due to the adsorption of reaction products. Moreover, the catalytic activity of single-atom nanozymes is discussed. Finally, a few suggestions for future research are proposed.

Hydrogen-Bonded Biohybrid Framework-Derived Highly Specific Nanozymes for Biomarker Sensing

Nanozymes are of particular interest due to their enzyme-mimicking activity and high stability that are favorable in biomedical sensing and immunoassays. In this work, we report a highly specific N-doped nanozyme through pyrolysis of framework-confined bovine serum albumin (BSA). This strategy allows one to translate the low-cost and featureless BSA into a highly active enzyme mimic. The obtained carbon nanozyme (denoted as HBF-1-C800) displays 3- to 7-fold enhancement on peroxidase (POD) activity compared with the conventional carbon nanozymes and also shows ca. 5-fold activity enhancement compared to the reported N-doping graphene. Such excellent POD activity originates from high N-doping efficiency, protein-induced defective sites, and the intrinsic porous structure of HBF-1-C800, which provides abundantly accessible active sites and accelerates substrate diffusion simultaneously. Importantly, the HBF-1-C800 nanozyme has highly specific POD activity and also enables resistance to several harsh conditions that should denature natural enzymes. These features allow it with high accuracy, stability, and sensitivity for biosensing applications. Moreover, HBF-1-C800 has been designed as a promising platform for colorimetric biosensing of several biomarkers including H₂O₂, glutathione, and glucose, with wide linear ranges and low limits of detection that are satisfied with the disease diagnosis.

Cu2+-modified hollow carbon nanospheres: an unusual nanozyme with enhanced peroxidase-like activity

A Cu²⁺-modified carboxylated hollow carbon nanospheres (Cu²⁺-HCNSs-COOH) was designed with enhanced peroxidase-like activity for the detection of hydrogen peroxide (H₂O₂) and degradation of methylene blue (MB). Hollow polymer nanospheres were fabricated from aniline, pyrrole, Triton-100, and ammonium persulfate via confined interfacial copolymerization reaction, which can be pyrolyzed to create HCNSs with the hollow gap diameter of about 20 nm under high temperature. Combining the synergistic effect of coordination and electrostatic interaction, Cu²⁺-HCNSs-COOH was constructed by anchoring Cu²⁺ on the surface of HCNSs-COOH. Furthermore, Cu²⁺-HCNSs-COOH has higher affinity for 3,3',5,5'-tetramethylbenzidine and H₂O₂ of 0.20 mM and 0.88 mM, respectively. Based on the rapid response of Cu²⁺-HCNSs-COOH to H₂O₂, we constructed a colorimetric sensing platform by detecting the absorbance of the 3,3',5,5'-tetramethylbenzidine-H₂O₂ system at 652 nm for quantifying H₂O₂, which holds good linear relationship between 1 and 150 μM and has a detection limit of 0.61 μM. We also investigated the degradation of MB in the presence of Cu²⁺-HCNSs-COOH and H₂O₂, which can degrade 80.7% pollutants within 30 min. This research developed an unusual nanozyme for bioassays and water pollution treatment, which broadened the way for the rapid development of clinical diagnostics and water pollution treatment.

Preparation of laccase mimicking nanozymes and their catalytic oxidation of phenolic pollutants

The construction of a nanozyme that mimics a natural enzyme is a promising strategy to obtain a highly stable catalyst.

The mechanisms of HSA@PDA/Fe nanocomposites with enhanced nanozyme activity and their application in intracellular H2O2 detection

Nanozymes have drawn increasing attention with their broad applications but most nanozymes lack enzyme-like molecular structures, resulting in weak selectivity and low activity. Bioinspired molecular assembly provides an extremely promising strategy to mimic natural enzyme processes and develop function enhanced architectures. Herein, a new bioinspired molecular assembly strategy based on human serum albumin@polydopamine/Fe nanocomposites (HSA@PDA/Fe NCs) was proposed, in which Fe(iii)/Fe(ii) were anchored on HSA supported on PDA. HSA@PDA/Fe NCs with iron as the active center and HSA@PDA as the skeleton showed excellent peroxidase-like activity, which was nearly 1000 times higher than that of free Fe(iii). This may be attributed to the phenomenon that the cycle of quinones and the hydroxyl group on the nanocomposite surface greatly accelerate the conversion of Fe(iii)/Fe(ii) in acidic microenvironments. Systematic experimental studies illustrated that its activity was mainly affected by the metal active center, followed by the polymeric ligand, while the protein framework has little effect on its activity. Meanwhile, even after freeze-thaw and thermal cycle tests, it also showed excellent catalytic stability. Besides, a colorimetric assay based on HSA@PDA/Fe NCs was developed for detection of H₂O₂in vitro and in situ detection of H₂O₂ generated from live cells. This work will facilitate the developments on theoretical analysis, rational design and practical applications of nanozymes based on bioinspired molecular assemblies.

Synthesis, Catalytic Properties and Application in Biosensorics of Nanozymes and Electronanocatalysts: A Review

The current review is devoted to nanozymes, i.e., nanostructured artificial enzymes which mimic the catalytic properties of natural enzymes. Use of the term "nanozyme" in the literature as indicating an enzyme is not always justified. For example, it is used inappropriately for nanomaterials bound with electrodes that possess catalytic activity only when applying an electric potential. If the enzyme-like activity of such a material is not proven in solution (without applying the potential), such a catalyst should be named an "electronanocatalyst", not a nanozyme. This paper presents a review of the classification of the nanozymes, their advantages vs. natural enzymes, and potential practical applications. Special attention is paid to nanozyme synthesis methods (hydrothermal and solvothermal, chemical reduction, sol-gel method, co-precipitation, polymerization/polycondensation, electrochemical deposition). The catalytic performance of nanozymes is characterized, a critical point of view on catalytic parameters of nanozymes described in scientific papers is presented and typical mistakes are analyzed. The central part of the review relates to characterization of nanozymes which mimic natural enzymes with analytical importance ("nanoperoxidase", "nanooxidases", "nanolaccase") and their use in the construction of electro-chemical (bio)sensors ("nanosensors").

Enhancing Enzyme-like Activities of Prussian Blue Analog Nanocages by Molybdenum Doping: Toward Cytoprotecting and Online Optical Hydrogen Sulfide Monitoring

Artificial nanozymes have been designed to solve the problems of high cost and poor stability involving natural enzymes in analytical applications. Nevertheless, the catalytic efficiency of the nanozyme still needs to be improved so that it can meet the stability and sensitivity requirements of continuous biological detection. We presented an effective tailoring strategy to enhance the enzyme-like activities of Prussian-blue-analog-based nanozymes. Molybdenum-polysulfide-deposited nickel-iron bimetal Prussian-blue-analog-based hollow nanocages (Nanocages) with peroxidase-, catalase-, and laccase-mimicking activities were synthesized. The doping of molybdenum successfully tailored the size, morphology, composition, and complex structure of the Nanocage, and the peroxidase- and laccase-mimicking activities of the Nanocage nanozyme were enhanced by over 37 and 27 times, respectively, compared with pristine Prussian blue analogs. Moreover, in environments of harsh pH, high temperature, and high salt concentration, Nanocages exhibited much higher stability than natural enzymes. The peroxidase- and catalase-mimicking activities were applied to eliminate reactive oxygen species in cells, whereas the laccase-like activity of Nanocages was integrated with an online sensing platform for in vivo and continuous optical hydrogen sulfide monitoring in the brains of living rats. Our findings may provide possibilities for advancing the design strategy of highly active nanozymes as well as nanozyme-based in vivo detection methods and will offer unique opportunities for their involvement in bioanalytical chemistry.

Bioinspired Construction of a Nanozyme-Based H2O2 Homeostasis Disruptor for Intensive Chemodynamic Therapy

The insufficient intracellular H₂O₂ level in tumor cells is closely associated with the limited efficacy of chemodynamic therapy (CDT). Despite tremendous efforts, engineering CDT agents with a straightforward and secure H₂O₂ supplying ability remains a great challenge. Inspired by the balance of H₂O₂ generation and elimination in cancer cells, herein, a nanozyme-based H₂O₂ homeostasis disruptor is fabricated to elevate the intracellular H₂O₂ level through facilitating H₂O₂ production and restraining H₂O₂ elimination for enhanced CDT. In the formulation, the disruptor with superoxide dismutase-mimicking activity can convert O₂^•- to H₂O₂, promoting the production of H₂O₂. Simultaneously, the suppression of catalase activity and depletion of glutathione by the disruptor weaken the transformation of H₂O₂ to H₂O. Thus, the well-defined system could perturb the H₂O₂ balance and give rise to the accumulation of H₂O₂ in cancer cells. The raised H₂O₂ level would ultimately amplify the Fenton-like reaction-based CDT efficiency. Our work not only paves a way to engineer alternative CDT agents with a H₂O₂ supplying ability for intensive CDT but also provides new insights into the construction of bioinspired materials.

Cobalt-based metal organic frameworks: a highly active oxidase-mimicking nanozyme for fluorescence “turn-on” assays of biothiol

With Co-MOFs as an oxidase-mimicking nanozyme, the AR oxidized product, non-fluorescent resazurin could be reduced to fluorescent resorufin by l-cysteine, which is specifically applied for fluorescence “turn-on” detection of l-cysteine.

Colorimetric sensing of chlorpyrifos through negative feedback inhibition of the catalytic activity of silver phosphate oxygenase nanozymes

Intensive use of organophosphate chlorpyrifos pesticides in farming has become a serious issue due to their harmful effects on living beings. Most fruits, vegetables and soil contain chlorpyrifos, and it cannot be rinsed out completely by water washing. Therefore, a selective and sensitive detection of chlorpyrifos is significant. In the present study, the intriguing oxidase-mimicking activity of Ag₃PO₄ nanoparticles (NPs) is explored for the fast and selective detection of chlorpyrifos pesticides. Ag₃PO₄ NPs exhibit several advantages, such as great catalytic efficiency, high stability, monodispersity and reusability, over other expensive nanozymes via a facile one-step sensing. The size, shape, crystal planes and diffraction patterns of the Ag₃PO₄ NPs were observed via FESEM and HR-TEM. The surface properties and oxidation states were analyzed via XPS technique. Ag₃PO₄ NPs possess intrinsic excellent oxidase-mimicking properties against 3,3′,5,5′-tetramethylbezidyne (TMB). When chlorpyrifos and Ag₃PO₄ NP nanozymes come in proper orientation proximity, chlorpyrifos is oxidized. The oxidized chlorpyrifos produces sulfide ions and chlorpyrifos oxon. The produced sulfide ions in the reaction system interact with Ag₃PO₄ NPs and inhibit their catalytic activity by feedback inhibition. Indeed, neither any catalytic site is left to oxidize TMB nor any blue colour appears. Thus, this feedback inhibition phenomenon senses chlorpyrifos pesticides. The calculated limit of detection (LOD) for the standard chlorpyrifos is ∼9.97 ppm, and the efficacy of the Ag₃PO₄ NPs calculated in terms of the K_m value was found to be 0.15 mM. A real sample analysis was carried out by the standard addition method with two soil samples collected from Pethapur and Chiloda villages.

Ag₃PO₄ oxygenase nanozymatic activity towards chlorpyrifos sensing.

Fe-N-C Single-Atom Nanozymes for the Intracellular Hydrogen Peroxide Detection

Recently, in situ detection of hydrogen peroxide (H₂O₂) generated from live cells have caused tremendous attention, because it is of great significance in the control of multiple biological processes. Herein, Fe-N-C single-atom nanozymes (Fe-N-C SAzymes) with intrinsic peroxidase-like activity were successfully prepared via high-temperature calcination using FeCl₂, glucose, and dicyandiamide as precursors. The Fe-N-C SAzymes with FeN_x as active sites were similar to natural metalloproteases, which can specifically enhance the peroxidase-like activity rather than oxidase-like activity. Accordingly, owing to the excellent catalytic efficiency of the Fe-N-C SAzymes, colorimetric biosensing of H₂O₂ in vitro was performed via a typical 3,3',5,5'-tetramethylbenzidine induced an allochroic reaction, demonstrating the satisfactory specificity and sensitivity. With regard to the practical application, in situ detection of H₂O₂ generated from the Hela cells by the Fe-N-C SAzymes was also performed, which can expand the applications of the newborn SAzymes.

Nanozymes: From New Concepts, Mechanisms, and Standards to Applications

Nanozymes are nanomaterials with intrinsic enzyme-like characteristics that have been booming over the past decade because of their capability to address the limitations of natural enzymes such as low stability, high cost, and difficult storage. Along with the rapid development and ever-deepening understanding of nanoscience and nanotechnology, nanozymes hold promise to serve as direct surrogates of traditional enzymes by mimicking and further engineering the active centers of natural enzymes. In 2007, we reported the first evidence that Fe₃O₄ nanoparticles (NPs) have intrinsic peroxidase-mimicking activity, and since that time, hundreds of nanomaterials have been found to mimic the catalytic activity of peroxidase, oxidase, catalase, haloperoxidase, glutathione peroxidase, uricase, methane monooxygenase, hydrolase, and superoxide dismutase. Uniquely, a broad variety of nanomaterials have been reported to simultaneously exhibit dual- or multienzyme mimetic activity. For example, Fe₃O₄ NPs show pH-dependent peroxidase-like and catalase-like activities; Prussian blue NPs simultaneously possess peroxidase-, catalase-, and superoxide dismutase-like activity; and Mn₃O₄ NPs mimic all three cellular antioxidant enzymes including superoxide dismutase, catalase, and glutathione peroxidase. Taking advantage of the physiochemical properties of nanomaterials, nanozymes have shown a broad range of applications from in vitro detection to replacing specific enzymes in living systems. With the emergence of the new concept of "nanozymology", nanozymes have now become an emerging new field connecting nanotechnology and biology. Since the landmark paper on nanozymes was published in 2007, we have extensively explored their catalytic mechanism, established the corresponding standards to quantitatively determine their catalytic activities, and opened up a broad range of applications from biological detection and environmental monitoring to disease diagnosis and biomedicine development. Here we mainly focus on our progress in the systematic design and construction of functionally specific nanozymes, the standardization of nanozyme research, and the exploration of their applications for replacing natural enzymes in living systems. We also show that, by combining the unique physicochemical properties and enzyme-like catalytic activities, nanozymes can offer a variety of multifunctional platforms with a broad of applications from in vitro detection to in vivo monitoring and therapy. For instance, targeting antibody-conjugated ferromagnetic nanozymes simultaneously provide three functions: target capture, magnetic separation, and nanozyme color development for target detection. We finally will address the prospect of nanozyme research to become "nanozymology". We expect that nanozymes with unique physicochemical properties and intrinsic enzyme-mimicking catalytic properties will attract broad interest in both fundamental research and practical applications and offer new opportunities for traditional enzymology.

Nucleobase-mediated synthesis of nitrogen-doped carbon nanozymes as efficient peroxidase mimics

Carbon nanozymes are catalytic carbon nanomaterials with intrinsic enzyme-like activities. They are advantageous over their natural counterparts in terms of higher stability, lower preparation cost, and better robustness. However, the peroxidase-like activities of the most developed carbon nanozymes were moderate due to the imperfection of active centers and limited tuning strategies. Herein, we designed a novel class of efficient peroxidase-mimicking carbon nanozymes with nitrogen atom doping. The N-doped carbon nanozymes were facilely synthesized by direct pyrolysis of different nucleobases at controlled temperatures without other treatments. A high ratio of nitrogen atoms was doped into the carbon skeleton. For example, 8.77 wt% of N remained in the guanine-derived carbon nanozyme with a pyrolysis temperature of 900 °C. The dominant graphitic N species greatly boosted the peroxidase-like activities of nucleobase-derived carbon nanozymes. Moreover, nucleobases are cheap, abundant, and environmentally friendly. We have demonstrated that nitrogen-rich nucleobases are ideal starting materials for the large-scale and cost-effective synthesis of N-doped carbon nanozymes. The carefully designed N-doped carbon nanozymes with superior activities were further used to construct effective biosensors for bioactive molecules (i.e., H2O2 and glucose). Highly sensitive and selective detection of H2O2 and glucose was achieved using the N-doped carbon nanozymes as efficient peroxidase mimics. This study offers an economical and sustainable approach for the scalable preparation of N-doped carbon nanozymes and creates a new path for the rational design of efficient peroxidase-mimicking carbon nanozymes by heteroatom doping.

Catalytic Mechanisms of Nanozymes and Their Applications in Biomedicine

The research on nanozymes has increased dramatically in recent years and a new interdiscipline, nanozymology, has emerged. A variety of nanomaterials have been designed to mimic the characteristics of natural enzymes, which connects an important bridge between nanotechnology and biological science. Unlike natural enzymes, the nanoscale properties of nanozymes endow them with the potential to regulate their enzymatic-like activity from different perspectives. The mechanisms behind those methods are intriguing. In this Review, we introduce these mechanisms from the aspects of surface chemistry, surface modification, molecular imprinting, and hybridization and then focus attention on some specific catalytic mechanisms of several representative nanozymes. The applications of nanozymes ranging from bioassay, imaging, to disease therapy are also discussed in detail to prove the fact that the inherent physicochemical properties of nanomaterials not only make nanozymes the analogues of biological enzymes, but also endow them with incomparable advantages and broad prospects in biomedical fields. Finally, four characteristics and some challenges of nanozymes are summarized.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Sensitive colorimetric sensor for point-of-care detection of acetylcholinesterase using cobalt oxyhydroxide nanoflakes

Point-of-care monitoring of acetylcholinesterase (AChE) is of significant importance for pesticide poisoning and disease diagnosis because it plays a pivotal role in biological nerve conduction systems. Herein, we designed a colorimetric strategy for the facile and accurate detection of AChE based on tandem catalysis with a multi-enzyme system, which is constituted by cobalt oxyhydroxide nanoflakes (CoOOH NFs) and choline oxidase (CHO). In this sensor, AChE catalytically hydrolyzed acetylcholine (ACh) to produce choline, which was further efficiently oxidized by CHO to yield H₂O₂. CoOOH NFs, as a nanozyme, efficiently catalyzed 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxTMB with the help of H₂O₂, accompanied by an enhancement of absorbance intensity. The resulting intensity could be employed as the signal output of the CHO/CoOOH/ACh system in monitoring AChE. Under optimal conditions, the developed sensor possessed a sensitive response to AChE with a detection limit of 33 μU mL^-1. Interestingly, the proposed platform was applied to fabricate a paper-based sensor for rapidly recognizing AChE by direct observation with the naked eyes. Combined with a smartphone and ImageJ software, we further developed an image-processing algorithm for the quantitative detection of AChE with highly promising results, which validated the outstanding potential of on-site application in clinical diagnostics and pesticide poisoning.

Carbon-mediated synthesis of shape-controllable manganese phosphate as nanozymes for modulation of superoxide anions in HeLa cells

Here we present a facile method to fabricate shape-controllable transition metal phosphates by using hollow carbon structures as substrates for superoxide sensing.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.