Nucleophilic Influences and Origin of the SN 2 Allylic Effect

Modular Divergent Synthesis of Indole Alkaloid Derivatives by an Atypical Ugi Multicomponent Reaction

We present an Ugi multicomponent approach to explore the chemical space around Aspidosperma-type monoterpene indole alkaloids. By variation of the isocyanide and carboxylic acid inputs we demonstrate the rapid generation of molecular diversity and the possibility to introduce handles for further modification. The key Ugi three-component reaction showed full diastereoselectivity towards the cis-fused ring system, which can be rationalized by DFT calculations that moreover indicate that the reaction proceeds via a Passerini-type hydrogen bonding mechanism. Several post-Ugi modifications were also performed, including Pictet-Spengler cyclization to highly complex nonacyclic natural product hybrid scaffolds.

SN 2 versus E2 Competition of Cyclic Ethers

We have quantum chemically studied the influence of ring strain on the competition between the two mechanistically different SN 2 and E2 pathways using a series of archetypal ethers as substrate in combination with a diverse set of Lewis bases (F- , Cl- , Br- , HO- , H3 CO- , HS- , H3 CS- ), using relativistic density functional theory at ZORA-OLYP/QZ4P. The ring strain in the substrate is systematically increased on going from a model acyclic ether to a 6- to 5- to 4- to 3-membered ether ring. We have found that the activation energy of the SN 2 pathway sharply decreases when the ring strain of the system is increased, thus on going from large to small cyclic ethers, the SN 2 reactivity increases. In contrast, the activation energy of the E2 pathway generally rises along this same series, that is, from large to small cyclic ethers. The opposing reactivity trends induce a mechanistic switch in the preferred reaction pathway for strong Lewis bases from E2, for large cyclic substrates, to SN 2, for small cyclic substrates. Weak Lewis bases are unable to overcome the higher intrinsic distortivity of the E2 pathway and, therefore, always favor the less distortive SN 2 reaction.

Theoretical Study on the Origin of Abnormal Regioselectivity in Ring-Opening Reaction of Hexafluoropropylene Oxide

That nucleophiles preferentially attack at the less sterically hindered carbon of epoxides under neutral and basic conditions has been generally accepted as a fundamental rule for predicting the regioselectivity of this type of reaction. However, this rule does not hold for perfluorinated epoxides, such as hexafluoropropylene oxide (HFPO), in which nucleophiles were found to attack at the more hindered CF₃ substituted β-C rather than the fluorine substituted α-C. In this contribution, we aim to shed light on the nature of this intriguing regioselectivity by density functional theory methods. Our calculations well reproduced the observed abnormal regioselectivities and revealed that the unusual regiochemical preference for the sterically hindered β-C of HFPO mainly arises from the lower destabilizing distortion energy needed to reach the corresponding ring-opening transition state. The higher distortion energy required for the attack of the less sterically hindered α-C results from a significant strengthening of the C(α)-O bond by the negative hyperconjugation between the lone pair of epoxide O atom and the antibonding C-F orbital.

C−X Bond Activation by Palladium: Steric Shielding versus Steric Attraction

The C−X bond activation (X = H, C) of a series of substituted C(n°)−H and C(n°)−C(m°) bonds with C(n°) and C(m°) = H₃C− (methyl, 0°), CH₃H₂C− (primary, 1°), (CH₃)₂HC− (secondary, 2°), (CH₃)₃C− (tertiary, 3°) by palladium were investigated using relativistic dispersion‐corrected density functional theory at ZORA‐BLYP‐D3(BJ)/TZ2P. The effect of the stepwise introduction of substituents was pinpointed at the C−X bond on the bond activation process. The C(n°)−X bonds become substantially weaker going from C(0°)−X, to C(1°)−X, to C(2°)−X, to C(3°)−X because of the increasing steric repulsion between the C(n°)‐ and X‐group. Interestingly, this often does not lead to a lower barrier for the C(n°)−X bond activation. The C−H activation barrier, for example, decreases from C(0°)−X, to C(1°)−X, to C(2°)−X and then increases again for the very crowded C(3°)−X bond. For the more congested C−C bond, in contrast, the activation barrier always increases as the degree of substitution is increased. Our activation strain and matching energy decomposition analyses reveal that these differences in C−H and C−C bond activation can be traced back to the opposing interplay between steric repulsion across the C−X bond versus that between the catalyst and substrate.

Computational insights into the inverse electron-demand Diels-Alder reaction of norbornenes with 1,2,4,5-tetrazines: norbornene substituents' effects on the reaction rate

The study of the reaction rates and mechanism of click chemistry reactions still remains an interesting challenge in organic chemistry. In this regard, the inverse electron demand Diels-Alder (IEDDA) reaction represents a promising metal-free alternative with enhanced reaction rates compared to other reactions of the click chemistry toolbox. Among the different types of dienophiles used in the IEDDA reactions, norbornenes have been widely used given their high stability and fast reaction rates. The inverse electron-demand Diels Alder reaction of 3,6-dipyridin-2-yl-1,2,4,5-tetrazine with a series of norbornene derivatives was studied with quantum mechanical calculations at the M06-2X/6-311+G(d,p) level of theory. The theoretical predictions were confirmed with the experimental data and analyzed with the use of the distortion/interaction model. The obtained results will help in obtaining a better understanding of the factors that affect the relative cycloaddition rates of norbornenes with tetrazines, which are crucial for selectively tuning their efficacy.

SN2 versus SN2' Competition

We have quantum chemically explored the competition between the S_N2 and S_N2' pathways for X^- + H₂C═CHCH₂Y (X, Y = F, Cl, Br, I) using a combined relativistic density functional theory and coupled-cluster theory approach. Bimolecular nucleophilic substitution reactions at allylic systems, i.e., C^γ═C^β-C^α-Y, bearing a leaving-group at the α-position, proceed either via a direct attack at the α-carbon (S_N2) or via an attack at the γ-carbon, involving a concerted allylic rearrangement (S_N2'), in both cases leading to the expulsion of the leaving-group. Herein, we provide a physically sound model to rationalize under which circumstances a nucleophile will follow either the aliphatic S_N2 or allylic S_N2' pathway. Our activation strain analyses expose the underlying physical factors that steer the S_N2/S_N2' competition and, again, demonstrate that the concepts of a reaction's "characteristic distortivity" and "transition state acidity" provide explanations and design tools for understanding and predicting reactivity trends in organic synthesis.

C(spn)-X (n = 1-3) Bond Activation by Palladium

We have studied the palladium-mediated activation of C( sp n )-X bonds (n = 1-3 and X = H, CH 3 , Cl) in archetypal model substrates H 3 C-CH 2 -X, H 2 C=CH-X and HC≡C-X by catalysts PdL n  with L n  = no ligand, Cl - , and (PH 3 ) 2 , using relativistic density functional theory at ZORA-BLYP/TZ2P. The oxidative addition barrier decreases along this series, even though the strength of the bonds increases going from C( sp 3 )-X, to C( sp 2 )-X, to C( sp )-X. Activation strain and matching energy decomposition analyses reveal that the decreased oxidative addition barrier going from  sp 3  to  sp 2  to  sp , originates from a reduction in the destabilizing steric (Pauli) repulsion between catalyst and substrate. This is the direct consequence of the decreasing coordination number of the carbon atom in C( sp n )-X, which goes from four, to three, to two along this series. The associated net stabilization of the catalyst-substrate interaction dominates the trend in strain energy which indeed becomes more destabilizing along this same series as the bond becomes stronger from C( sp 3 )-X to C( sp )-X.

How Solvation Influences the SN2 versus E2 Competition

We have quantum chemically investigated how solvation influences the competition between the S_N2 and E2 pathways of the model F^– + C₂H₅Cl reaction. The system is solvated in a stepwise manner by going from the gas phase, then via microsolvation of one to three explicit solvent molecules, then last to bulk solvation using relativistic density functional theory at (COSMO)-ZORA-OLYP/QZ4P. We explain how and why the mechanistic pathway of the system shifts from E2 in the gas phase to S_N2 upon strong solvation of the Lewis base (i.e., nucleophile/protophile). The E2 pathway is preferred under weak solvation of the system by dichloromethane, whereas a switch in reactivity from E2 to S_N2 is observed under strong solvation by water. Our activation strain and Kohn–Sham molecular orbital analyses reveal that solvation of the Lewis base has a significant impact on the strength of the Lewis base. We show how strong solvation furnishes a weaker Lewis base that is unable to overcome the high characteristic distortivity associated with the E2 pathway, and thus the S_N2 pathway becomes viable.

Suppressing carboxylate nucleophilicity with inorganic salts enables selective electrocarboxylation without sacrificial anodes

Although electrocarboxylation reactions use CO2 as a renewable synthon and can incorporate renewable electricity as a driving force, the overall sustainability and practicality of this process is limited by the use of sacrificial anodes such as magnesium and aluminum. Replacing these anodes for the carboxylation of organic halides is not trivial because the cations produced from their oxidation inhibit a variety of undesired nucleophilic reactions that form esters, carbonates, and alcohols. Herein, a strategy to maintain selectivity without a sacrificial anode is developed by adding a salt with an inorganic cation that blocks nucleophilic reactions. Using anhydrous MgBr2 as a low-cost, soluble source of Mg2+ cations, carboxylation of a variety of aliphatic, benzylic, and aromatic halides was achieved with moderate to good (34-78%) yields without a sacrificial anode. Moreover, the yields from the sacrificial-anode-free process were often comparable or better than those from a traditional sacrificial-anode process. Examining a wide variety of substrates shows a correlation between known nucleophilic susceptibilities of carbon-halide bonds and selectivity loss in the absence of a Mg2+ source. The carboxylate anion product was also discovered to mitigate cathodic passivation by insoluble carbonates produced as byproducts from concomitant CO2 reduction to CO, although this protection can eventually become insufficient when sacrificial anodes are used. These results are a key step toward sustainable and practical carboxylation by providing an electrolyte design guideline to obviate the need for sacrificial anodes.

Chemical reactivity from an activation strain perspective

Chemical reactions are ubiquitous in the universe, they are at the core of life, and they are essential for industrial processes. The drive for a deep understanding of how something occurs, in this case, the mechanism of a chemical reaction and the factors controlling its reactivity, is intrinsically valuable and an innate quality of humans. The level of insight and degree of understanding afforded by computational chemistry cannot be understated. The activation strain model is one of the most powerful tools in our arsenal to obtain unparalleled insight into reactivity. The relative energy of interacting reactants is evaluated along a reaction energy profile and related to the rigidity of the reactants' molecular structure and the strength of the stabilizing interactions between the deformed reactants: ΔE(ζ) = ΔEstrain(ζ) + ΔEint(ζ). Owing to the connectedness between the activation strain model and Kohn-Sham molecular orbital theory, one is able to obtain a causal relationship between both the sterics and electronics of the reactants and their mutual reactivity. Only when this is accomplished one can eclipse the phenomenological explanations that are commonplace in the literature and textbooks and begin to rationally tune and optimize chemical transformations. We showcase how the activation strain model is the ideal tool to elucidate fundamental organic reactions, the activation of small molecules by metallylenes, and the cycloaddition reactivity of cyclic diene- and dipolarophiles.

A Unified Framework for Understanding Nucleophilicity and Protophilicity in the SN 2/E2 Competition

The concepts of nucleophilicity and protophilicity are fundamental and ubiquitous in chemistry. A case in point is bimolecular nucleophilic substitution (SN 2) and base-induced elimination (E2). A Lewis base acting as a strong nucleophile is needed for SN 2 reactions, whereas a Lewis base acting as a strong protophile (i.e., base) is required for E2 reactions. A complicating factor is, however, the fact that a good nucleophile is often a strong protophile. Nevertheless, a sound, physical model that explains, in a transparent manner, when an electron-rich Lewis base acts as a protophile or a nucleophile, which is not just phenomenological, is currently lacking in the literature. To address this fundamental question, the potential energy surfaces of the SN 2 and E2 reactions of X- +C2 H5 Y model systems with X, Y = F, Cl, Br, I, and At, are explored by using relativistic density functional theory at ZORA-OLYP/TZ2P. These explorations have yielded a consistent overview of reactivity trends over a wide range in reactivity and pathways. Activation strain analyses of these reactions reveal the factors that determine the shape of the potential energy surfaces and hence govern the propensity of the Lewis base to act as a nucleophile or protophile. The concepts of "characteristic distortivity" and "transition state acidity" of a reaction are introduced, which have the potential to enable chemists to better understand and design reactions for synthesis.

SN2 versus E2 Competition of F- and PH2- Revisited

We have quantum chemically analyzed the competition between the bimolecular nucleophilic substitution (S_N2) and base-induced elimination (E2) pathways for F^- + CH₃CH₂Cl and PH₂^- + CH₃CH₂Cl using the activation strain model and Kohn-Sham molecular orbital theory at ZORA-OLYP/QZ4P. Herein, we correct an earlier study that intuitively attributed the mechanistic preferences of F^- and PH₂^-, i.e., E2 and S_N2, respectively, to a supposedly unfavorable shift in the polarity of the abstracted β-proton along the PH₂^--induced E2 pathway while claiming that ″...no correlation between the thermodynamic basicity and E2 rate should be expected.″ Our analyses, however, unequivocally show that it is simply the 6 kcal mol^-1 higher proton affinity of F^- that enables this base to engage in a more stabilizing orbital interaction with CH₃CH₂Cl and hence to preferentially react via the E2 pathway, despite the higher characteristic distortivity (more destabilizing activation strain) associated with this pathway. On the other hand, the less basic PH₂^- has a weaker stabilizing interaction with CH₃CH₂Cl and is, therefore, unable to overcome the characteristic distortivity of the E2 pathway. Therefore, the mechanistic preference of PH₂^- is steered to the S_N2 reaction channel (less-destabilizing activation strain).

Ambident Nucleophilic Substitution: Understanding Non-HSAB Behavior through Activation Strain and Conceptual DFT Analyses

The ability to understand and predict ambident reactivity is key to the rational design of organic syntheses. An approach to understand trends in ambident reactivity is the hard and soft acids and bases (HSAB) principle. The recent controversy over the general validity of this principle prompted us to investigate the competing gas-phase SN 2 reaction channels of archetypal ambident nucleophiles CN- , OCN- , and SCN- with CH3 Cl (SN 2@C) and SiH3 Cl (SN 2@Si), using DFT calculations. Our combined analyses highlight the inability of the HSAB principle to correctly predict the reactivity trends of these simple, model reactions. Instead, we have successfully traced reactivity trends to the canonical orbital-interaction mechanism and the resulting nucleophile-substrate interaction energy. The HOMO-LUMO orbital interactions set the trend in both SN 2@C and SN 2@Si reactions. We provide simple rules for predicting the ambident reactivity of nucleophiles based on our Kohn-Sham molecular orbital analysis.

Understanding chemical reactivity using the activation strain model

Understanding chemical reactivity through the use of state-of-the-art computational techniques enables chemists to both predict reactivity and rationally design novel reactions. This protocol aims to provide chemists with the tools to implement a powerful and robust method for analyzing and understanding any chemical reaction using PyFrag 2019. The approach is based on the so-called activation strain model (ASM) of reactivity, which relates the relative energy of a molecular system to the sum of the energies required to distort the reactants into the geometries required to react plus the strength of their mutual interactions. Other available methods analyze only a stationary point on the potential energy surface, but our methodology analyzes the change in energy along a reaction coordinate. The use of this methodology has been proven to be critical to the understanding of reactions, spanning the realms of the inorganic and organic, as well as the supramolecular and biochemical, fields. This protocol provides step-by-step instructions-starting from the optimization of the stationary points and extending through calculation of the potential energy surface and analysis of the trend-decisive energy terms-that can serve as a guide for carrying out the analysis of any given reaction of interest within hours to days, depending on the size of the molecular system.

PyFrag 2019-Automating the exploration and analysis of reaction mechanisms

We present a substantial update to the PyFrag 2008 program, which was originally designed to perform a fragment-based activation strain analysis along a provided potential energy surface. The original PyFrag 2008 workflow facilitated the characterization of reaction mechanisms in terms of the intrinsic properties, such as strain and interaction, of the reactants. The new PyFrag 2019 program has automated and reduced the time-consuming and laborious task of setting up, running, analyzing, and visualizing computational data from reaction mechanism studies to a single job. PyFrag 2019 resolves three main challenges associated with the automated computational exploration of reaction mechanisms: it (1) computes the reaction path by carrying out multiple parallel calculations using initial coordinates provided by the user; (2) monitors the entire workflow process; and (3) tabulates and visualizes the final data in a clear way. The activation strain and canonical energy decomposition results that are generated relate the characteristics of the reaction profile in terms of intrinsic properties (strain, interaction, orbital overlaps, orbital energies, populations) of the reactant species. © 2019 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.