Tetraarylpyrrolo[3,2-b]pyrrole-BODIPY dyad: a molecular rotor for FRET-based viscosity sensing

With the aim to develop a FRET-based viscosity sensor, two dyad molecules, 4 and 5, comprising tetraarylpyrrolo[3,2-b]pyrrole (TAPP) (donor) and naked boron-dipyrromethene (BODIPY) dyes (acceptor), were designed. Dyads were synthesized via acid-catalyzed multicomponent reactions followed by Sonogashira coupling. In both dyads, the BODIPY and TAPP moieties are linked through phenylethynyl groups, which allow free rotation of the BODIPY dyes; that is, they can act as molecular rotors. This was supported by X-ray crystallographic and DFT-optimized structures. Spectroscopic studies also confirmed the presence of both TAPP and BODIPY dyes in dyads with no electronic interactions that are suitable for fluorescence resonance energy transfer (FRET). Very high energy transfer efficiency (ETE >99%) from the donor TAPP moiety to the acceptor BODIPY moiety on excitation at the TAPP part was observed. However, due to the non-fluorescent nature of naked BODIPY dyes, no fluorescence emission was observed from the BODIPY moiety in both dyads. With increasing solvent viscosities, emission from the BODIPY moieties increases due to the restricted rotation of the BODIPY moieties. Plotting the logarithms of the fluorescent intensity of dyad 5 and the viscosity of the solution showed a good linear correlation obeying a Förster-Hoffmann equation. Non-fluorescent dyad 5 in methanol became greenish-yellow fluorescent in a methanol/glycerol (1:1) solvent. Furthermore, with an increase in the temperature of the methanol/glycerol (1:1) system, as the viscosity decreases, the fluorescence also starts decreasing. Thus, dyad 5 is capable of sensing the viscosity of the medium via a FRET-based "Off-On" mechanism. This type of viscosity sensor with a very large pseudo-Stokes shift and increased sensitivity will be useful for advancing chemo-bio sensing and imaging applications.

Expanding Color Control of Anodically Coloring Electrochromes Based on Electron-Rich 1,4-Dihydropyrrolo[3,2-b]pyrroles

Anodically coloring electrochromes have received attention in recent years as high-contrast alternatives to cathodically coloring electrochromes due to their superior optical contrast during electrochemical switching. While current systems represent significant progress for organic electrochromics, it is necessary to expand the structural diversity of these materials while simultaneously reducing the hazards associated with synthetic protocols. With these considerations in mind, a family of 1,4-dihydropyrrolo[3,2-b]pyrrole (DHPP) chromophores with varying functionalities along the 2,5-axis was envisioned to accomplish these goals. After predicting different absorbance traits as oxidized molecules with time-dependent density functional theory, DHPP chromophores with varying peripheral functionalities were synthesized in a single aerobic synthetic step via an iron-catalyzed multicomponent reaction and characterized as high-contrast chromophores. In solution, the DHPP chromophores absorb in the ultraviolet region of the electromagnetic spectrum, resulting in color-neutral L*a*b* color coordinates of ∼100, 0, 0. Upon chemical oxidation, each molecule transitions to absorb at various points across the visible spectrum based on the extent of electron-donating ability and can display five distinct colors. Importantly, the chromophores are redox-active and display switching capabilities with an applied electrochemical potential. In conjunction with building fundamental insights into molecular design of DHPP chromophores, the results and synthetic simplicity of DHPPs make them compelling materials for color-controlled high-contrast electrochromes.

Strongly Polarized π-Extended 1,4-Dihydropyrrolo[3,2-b]pyrroles Fused with Tetrazolo[1,5-a]quinolines

A straightforward route to 1,4-dihydropyrrolo[3,2-b]pyrroles comprised of two electron-withdrawing quinoline or tetrazolo[1,5-a]quinoline scaffolds has been developed. The versatile multicomponent reaction affording 1,4-dihydropyrrolo[3,2-b]pyrroles combined with intramolecular direct arylation enables assembly of these products in just three steps from anilines with overall yields exceeding 30%. The planarized, ladder-type heteroacenes possess up to 14 conjugated rings. These nominally quadrupolar materials exhibit efficient fluorescence with wavelengths spanning most of the visible spectrum from green-yellow for the dyes possessing biaryl bridges and orange-red for the fully fused systems. In many cases, the fluorescence quantum yields are large, the solvatofluorochromic effects are strong, and the fluorescence is maintained even in crystalline state. Analysis of the electronic structure of these molecular architectures using quantum chemical methods suggests that the character and position of the flanking heterocycle determine the shape of HOMO and LUMO and their extension to N-aryl substituents, influencing the values of molar absorption coefficient. An experimental study of the two-photon absorption (2PA) properties has revealed that it occurs in the 700-800 nm range with apparent deviation from the Laporte parity selection rule, which may be attributed to Hertzberg-Teller contribution to vibronically allowed 2PA transition.

Quadrupolar, Highly Polarized Dyes: Emission Dependence on Viscosity and Selective Mitochondria Staining

Quadrupolar A-D-A-type 1,4-dihydropyrrolo[3,2-b]pyrroles (DHPPs) bearing pyridinium and quinolinium substituents emit in the 500-600 nm region. The enhancement of electronic communication between the electron-rich heterocyclic core and electron-deficient peripheral substituents turned out to be crucial for achieving emission enhancement in viscous media. DHPP bearing two 4-pyridinium substituents has optical brightness 34,000 in glycerol and only 700 in MeOH, as evidenced by measurements of the emission intensity and fluorescence lifetimes in a series of polar solvents. Such behavior makes it an excellent candidate for viscosity probes in fluorescence microscopy, as demonstrated by the fluorescence imaging of H9C2 cardiomyocytes.

New pyrrolo[3,2-b]pyrroles with AIE characteristics for detection of dichloromethane and chloroform

Three new pyrrolo[3,2-b]pyrrole derivatives containing methoxyphenyl, pyrene or tetraphenylethylene (TPE) units (compounds 1-3) have been designed, synthesized and fully characterized. The aggregation-induced emission (AIE) properties of compounds 1-3 were tested in different water fraction (fw ) of tetrahydrofuran (THF). The pyrrolo[3,2-b]pyrrole derivative 3 containing TPE units exhibited typical AIE features with an enhanced emission (∼32-fold) in the solid state versus in solution; compounds 1 and 2 exhibited an aggregation-caused quenching effect. In addition, the steric and electronic effects of the peripheral moieties on the emission behavior, both in solution and in the solid state, have been investigated. Moreover, pyrrolo[3,2-b]pyrrole 1 exhibits high sensitivity and selectivity for dichloromethane and chloroform solvents, with the system displaying a new emission peak and fast response time under ultraviolet irradiation.

Relating Design and Optoelectronic Properties of 1,4-Dihydropyrrolo[3,2-b]pyrroles Bearing Biphenyl Substituents

Understanding the influence of peripheral functionality on optoelectronic properties of conjugated materials is an important task for the continued development of chromophores for myriad applications. Here, π-extended 1,4-dihydropyrrolo[3,2-b]pyrrole (DHPP) chromophores with varying electron-donating or electron-withdrawing capabilities were synthesized via Suzuki cross-coupling reactions, and the influence of functionality on optoelectronic properties was elucidated. First, chromophores display distinct differences in the UV-vis absorbance spectra measured via UV-vis absorbance spectroscopy in addition to changes in the onset of oxidation measured with cyclic voltammetry and differential pulse voltammetry. Solution oxidation studies found that variations in the electron-donating and -withdrawing capabilities result in different absorbance profiles of the radical cations that correspond to quantifiably different colors. In addition to fundamental insights into the molecular design of DHPP chromophores and their optoelectronic properties, two chromophores display high-contrast electrochromism, which makes them potentially compelling in electronic devices. Overall, this study represents the ability to fine-tune the optoelectronic properties of DHPP chromophores in their neutral and oxidized states and expands the understanding of structure-property relationships that will guide the continued development of DHPP-based materials.

Impact of the bromination of carbazole-based D-π-A organic dyes on their optical and electrochemical properties and visible-light-driven hydrogen evolution

Brominated dyes, 2C-n (n = 1-5), 3C-4 and 4C-4, were prepared through bromination of three carbazole-based D-π-A dyes, 2C, 3C and 4C with N-bromosuccinimide (NBS). The detailed structures of the brominated dyes were confirmed by ¹H NMR spectroscopy and mass spectrometry (MS). The introduction of the Br atom on the 1,8-positon of carbazole moieties led to blueshifted UV-vis and photoluminescence (PL) spectra, increased initial oxidation potentials and enlarged dihedral angles, indicating bromination enhanced non-planarity of the dye molecules. In the hydrogen production experiments, with the increase of the Br content in brominated dyes, the photocatalytic activity increased continuously (except 2C-1). The dye-sensitized Pt/TiO_2, 2C-4@T, 3C-4@T and 4C-4@T, exhibited high hydrogen production efficiencies of 655.4, 877.9 and 905.6 μmol h^-1 g^-1, respectively, which were 4-6-fold higher than those of 2C@T, 3C@T and 4C@T. The enhanced performance of photocatalytic hydrogen evolution was attributed to decreased dye aggregation resulting from the highly non-planar molecular structures of the brominated dyes.

Multifunctional Heteropentalenes: From Synthesis to Optoelectronic Applications

In the broad family of heteropentalenes, the combination of two five-membered heterocyclic rings fused in the [3,2-b] mode has attracted the most significant attention. The relatively straightforward access to these structures, being a consequence of the advances in the last two decades, combined with their physicochemical properties which match the requirements associated with many applications has led to an explosion of applied research. In this Perspective, we will discuss the recent progress of heteropentalenes' usefulness as an active element of organic light-emitting diodes and organic field-effect transistors. Among the myriad of possible combinations for the different heteroatoms, thieno[3,2-b]thiophenes and 1,4-dihydropyrrolo[3,2-b]pyrroles are subject to the most intense studies. Together they comprise a potent optoelectronics tool resulting from the combination of appreciable photophysical properties, chemical reactivity, and straightforward synthesis.

From 2,5-Diformyl-1,4-dihydropyrrolo[3,2-b]pyrroles to Quadrupolar, Centrosymmetric Two-Photon-Absorbing A-D-A Dyes

An original approach has been developed for the insertion of formyl substituents at positions 2 and 5 of 1,4-dihydropyrrolo[3,2-b]pyrroles by conversion of thiazol-2-yl substituents. The synthetic utility of these formyl groups was investigated, and a series of centrosymmetric A-π-D-π-A frameworks were constructed. The two-photon absorption of the quadrupolar pyrrolo[3,2-b]pyrrole possessing two dicyanovinylidene flanking groups is attributed to an S0 → (S1) → S4 transition which has a large TPA cross-section (1300 GM) for a molecule of this size.

Going beyond the borders: pyrrolo[3,2-b]pyrroles with deep red emission

A two-step route to strongly absorbing and efficiently orange to deep red fluorescent, doubly B/N-doped, ladder-type pyrrolo[3,2-b]pyrroles has been developed. We synthesize and study a series of derivatives of these four-coordinate boron-containing, nominally quadrupolar materials, which mostly exhibit one-photon absorption in the 500-600 nm range with the peak molar extinction coefficients reaching 150 000, and emission in the 520-670 nm range with the fluorescence quantum yields reaching 0.90. Within the family of these ultrastable dyes even small structural changes lead to significant variations of the photophysical properties, in some cases attributed to reversal of energy ordering of alternate-parity excited electronic states. Effective preservation of ground-state inversion symmetry was evidenced by very weak two-photon absorption (2PA) at excitation wavelengths corresponding to the lowest-energy, strongly one-photon allowed purely electronic transition. π-Expanded derivatives and those possessing electron-donating groups showed the most red-shifted absorption- and emission spectra, while displaying remarkably high peak 2PA cross-section (σ _2PA) values reaching ∼2400 GM at around 760 nm, corresponding to a two-photon allowed higher-energy excited state. At the same time, derivatives lacking π-expansion were found to have a relatively weak 2PA peak centered at ca. 800-900 nm with the maximum σ _2PA ∼50-250 GM. Our findings are augmented by theoretical calculations performed using TD-DFT method, which reproduce the main experimental trends, including the 2PA, in a nearly quantitative manner. Electrochemical studies revealed that the HOMO of the new dyes is located at ca. -5.35 eV making them relatively electron rich in spite of the presence of two B^--N⁺ dative bonds. These dyes undergo a fully reversible first oxidation, located on the diphenylpyrrolo[3,2-b]pyrrole core, directly to the di(radical cation) stage.

Photocatalytic H2 Production from Water by Metal-free Dye-sensitized TiO2 Semiconductors: The Role and Development Process of Organic Sensitizers

The utilization of solar energy to produce hydrogen from water is showing increased importance and desirability in the field of artificial photosynthesis to produce clean and sustainable fuels. In a typical three-component dye-sensitized semiconductor system for photocatalysis, the dye sensitizer plays an essential role of energy antenna for harvesting visible light and promoting the reduction reaction to generate hydrogen. In recent decades, a lot of attention has focused on metal-free organic sensitizers, which have the advantages of low cost, high molar extinction coefficient, good modifiability and, most importantly, ability to avoid the use of noble metal ions. This Review enumerates the design strategies, specific properties and photocatalytic performances of metal-free sensitizers in the past 30 years and concludes their evolution process. The advantages of different types of metal-free sensitizers are highlighted and the instructively enlightening experiences are systematic summarized.

Method for the Large-Scale Synthesis of Multifunctional 1,4-Dihydro-pyrrolo[3,2-b]pyrroles

A thorough investigation has enabled the optimization of the synthesis of 1,4-dihydro-pyrrolo[3,2-b]pyrroles. Although salts of such metals as vanadium, niobium, cerium, and manganese were found to facilitate the formation of 1,4-dihydro-pyrrolo[3,2-b]pyrroles from amines, aldehydes, and diacetyl, we confirmed that iron salts are the most efficient catalysts. The conditions identified (first step: toluene/AcOH = 1:1, 1 h, 50 °C; second step: toluene/AcOH = 1:1, Fe(ClO₄)₃·H₂O, 16 h, 50 °C) resulted in the formation of tetraarylpyrrolo[3,2-b]pyrroles in a 6–69% yield. For the first time, very electron-rich substituents (4-Me₂NC₆H₄, 3-(OH)C₆H₄, pyrrol-2-yl) originating from aldehydes and sterically hindered substituents (2-ClC₆H₄, 2-BrC₆H₄, 2-CNC₆H₄, 2-(CO₂Me)C₆H₄, 2-(TMS-C≡C)C₆H₄) present on anilines can be appended to the pyrrolo[3,2-b]pyrrole core. It is now also possible to prepare 1,4-dihydropyrrolo[3,2-b]pyrroles bearing an ordered arrangement of N-substituents and C-substituents ranging from coumarin, quinoline, phthalimide to truxene. These advances in scope enable independent regulations of many desired photophysical properties, including the Stokes shift value and emission color ranging from violet-blue through deep blue, green, yellow to red. Simultaneously, the optimized conditions have finally allowed the synthesis of these extremely promising heterocycles in amounts of more than 10 g per run without a concomitant decrease in yield or product contamination. Empowered with better functional group compatibility, novel derivatization strategies were developed.

Solar Cells for Indoor Applications: Progress and Development

The Internet of things (IoT) has been rapidly growing in the past few years. IoT connects numerous devices, such as wireless sensors, actuators, and wearable devices, to optimize and monitor daily activities. Most of these devices require power in the microwatt range and operate indoors. To this end, a self-sustainable power source, such as a photovoltaic (PV) cell, which can harvest low-intensity indoor light, is appropriate. Recently, the development of highly efficient PV cells for indoor applications has attracted tremendous attention. Therefore, different types of PV materials, such as inorganic, dye-sensitized, organic, and perovskite materials, have been employed for harvesting low-intensity indoor light energy. Although considerable efforts have been made by researchers to develop low-cost, stable, and efficient PV cells for indoor applications, Extensive investigation is necessary to resolve some critical issues concerning PV cells, such as environmental stability, lifetime, large-area fabrication, mechanical flexibility, and production cost. To address these issues, a systematic review of these aspects will be highly useful to the research community. This study discusses the current status of the development of indoor PV cells based on previous reports. First, we have provided relevant background information. Then, we have described the different indoor light sources, and subsequently critically reviewed previous reports regarding indoor solar cells based on different active materials such as inorganic, dye-sensitized, organic, and perovskite. Finally, we have placed an attempt to provide insight into factors needed to further improve the feasibility of PV technology for indoor applications.

Molecular engineering of the alkyl chain in planar carbazole dyes toward efficient interfacial charge transfer processes

With the extension of the alkyl chain, the interfacial charge transfer processes are effectively improved.

Excited-State Symmetry Breaking in an Aza-Nanographene Dye

The photophysics of a structurally unique aza-analogue of polycyclic aromatic hydrocarbons characterized by 12 conjugated rings and a curved architecture was studied in detail. The combined experimental and computational investigation reveals that the lowest excited state has charge-transfer character, in spite of the absence of any peripheral electron-withdrawing groups. The exceptionally electron-rich core comprised of two fused pyrrole rings is responsible for it. The observed strong solvatofluorochromism is related to symmetry breaking occurring in the emitting excited state, leading to a significant dipole moment (13.5 D) in the relaxed excited state. The anomalously small fluorescence anisotropy of this molecule, which is qualitatively different from what is observed in standard quadrupolar dyes, is explained as due to the presence of excited states that are close in energy but have different polarization directions.

Fe(iii)-Catalyzed synthesis of pyrrolo[3,2-b]pyrroles: formation of new dyes and photophysical studies

A new method for the synthesis of 1,2,4,5-tetrarylpyrrolo[3,2-b]pyrroles has been developed employing iron(iii) perchlorate as a catalyst.