Self‐assembly of Amphiphilic Alternating Copolymers

Synthesis of Alternating Copolymers with Substituents Containing Heteroatoms and the Regulation of Nontraditional Intrinsic Luminescence

Compared with other sequence structure polymers, alternating polymers usually have several unique properties, but their properties are more sensitive to changes in structure. By investigating the relationship between the structure and properties of alternating polymer chains, polymers with desired properties can likely be synthesized. In this study, a series of alternating copolymers of 1,1-diphenylethylene (DPE) derivatives and styrene derivatives, which exhibit nontraditional intrinsic luminescence (NTIL), are synthesized using living anionic polymerization. By changing the bridge plane structure of the DPE derivatives and the substituent groups of the styrene derivatives, the rigid chain structure of the alternating copolymers containing styrene derivative with a large steric hindrance is altered, and this change is observed by the altered fluorescence properties. Based on the results from experimental tests and theoretical simulations, copolymers with bridge plane structures have higher fluorescence emission intensities; moreover, a balance is observed between the electronic and steric hindrance effects of substituents on the fluorescence intensities, and polymer chains that are too rigid cause a decrease in the fluorescence intensities. Thus, the influence of the chain structure on the fluorescence properties of NTIL polymers cannot be disregarded.

Crystalline Nanoflowers Derived from the Intramolecular Cyclization-Induced Self-Assembly of an Amorphous Poly(amic acid) at High Solid Content

The investigation of the amorphous to crystalline transformation and the corresponding influence on the self-assembly behavior of amphiphilic polymers are of significant interest in this field. Herein, we propose the concept of intramolecular cyclization-induced self-assembly (ICISA) to prepare crystalline nanoflowers at a high solid content of 15% on the basis of the amorphous to crystalline transformation of poly(amic acid) (PAA). Taking advantage of the reactive property of the PAA, rigid and crystalline polyimide (PI) segments are introduced to the backbone of the PAA to give P(AA-stat-I) induced by the intramolecular cyclization reaction upon thermal treatment, leading to the in situ formation of crystalline nanoflowers. Revealing the formation mechanism of the nanoflowers, we found that the nanosheets are formed at the early stage and then stacked to form the nanoflowers at high concentrations. The relationship between the degree of imidization and incubation temperature is quantitatively analyzed, and the effects of temperature on the morphology, degree of imidization, and crystallinity of the assemblies are also investigated. Furthermore, computer simulations demonstrate the optimized temperature of ICISA of 160 °C, which ensures the match between the intramolecular cyclization reaction rate, the self-assembly process, and the lowest energy state of the self-assembly system, resulting in the formation of nanoflowers with high crystallinity. Overall, a facile one-step strategy is proposed to prepare crystalline nanoflowers based on the in situ thermally triggered intramolecular cyclization reaction of a PAA, which may bring fresh insights into the dynamic amorphous to the crystalline transformation of polymers.

Ultrasmall Single-Chain Nanoparticles Derived from Amphiphilic Alternating Copolymers

The collapse or folding of an individual polymer chain into a nanoscale particle gives rise to single-chain nanoparticles (SCNPs), which share a soft nature with biological protein particles. The precise control of their properties, including morphology, internal structure, size, and deformability, are a long-standing and challenging pursuit. Herein, a new strategy based on amphiphilic alternating copolymers for producing SCNPs with ultrasmall size and uniform structure is presented. SCNPs are obtained by folding the designed alternating copolymer in N,N-dimethylformamide (DMF) and fixing it through a photocatalyzed cycloaddition reaction of anthracene units. Molecular dynamics simulation confirms the solvophilic outer corona and solvophobic inner core structure of SCNPs. Furthermore, by adjusting the length of PEG units, precise control over the mean size of SCNPs is achieved within the range of 2.8 to 3.9 nm. These findings highlight a new synthetic strategy that enables enhanced control over morphology and internal structure while achieving ultrasmall and uniform size for SCNPs.

Designable Photo-Responsive Micron-Scale Ultrathin Peptoid Nanobelts for Enhanced Performance on Hydrogen Evolution Reaction

The development of high-reactive single-atom catalysts (SACs) based on long-range-ordered ultrathin organic nanomaterials (UTONMs) (i.e., below 3 nm) provides a significant tactic for the advancement in hydrogen evolution reactions (HER) but remains challenging. Herein, photo-responsive ultrathin peptoid nanobelts (UTPNBs) with a thickness of ≈2.2 nm and micron-scaled length are generated using the self-assembly of azobenzene-containing amphiphilic ternary alternating peptoids. The pendants hydrophobic conjugate stacking mechanism reveals the formation of 1D ultralong UTPNBs, whose thickness is dictated by the length of side groups that are linked to peptoid backbones. The photo-responsive feature is demonstrated by a reversible morphological transformation from UTPNBs to nanospheres (21.5 nm) upon alternative irradiation with UV and visible lights. Furthermore, the electrocatalyst performance of these aggregates co-decorated with nitrogen-rich ligand of terpyridine (TE) and uniformly-distributed atomic platinum (Pt) is evaluated toward HER, with a photo-controllable electrocatalyst activity that highly depended on both the presence of Pt element and structural characteristic of substrates. The Pt-based SACs using TE-modified UTPNBs as support exhibit a favorable electrocatalytic capacity with an overpotential of ≈28 mV at a current density of 10 mA cm-2. This work presents a promising strategy to fabricate stimuli-responsive UTONMs-based catalysts with controllable HER catalytic performance.

Construction of intelligent drug delivery system based on polysaccharide-derived polymer micelles: A review

Micelles are nanostructures developed via the spontaneous assembly of amphiphilic polymers in aqueous systems, which possess the advantages of high drug stability or active-ingredient solubilization, targeted transport, controlled release, high bioactivity, and stability. Polysaccharides have excellent water solubility, biocompatibility, and degradability, and can be modified to achieve a hydrophobic core to encapsulate hydrophobic drugs, improve drug biocompatibility, and achieve regulated delivery of the loaded drug. Micelles drug delivery systems based on polysaccharides and their derivatives show great potential in the biomedical field. This review discusses the principles of self-assembly of amphiphilic polymers and the formation of micelles; the preparation of amphiphilic polysaccharides is described in detail, and an overview of common polysaccharides and their modifications is provided. We focus on the review of strategies for encapsulating drugs in polysaccharide-derived polymer micelles (PDPMs) and building intelligent drug delivery systems. This review provides new research directions that will help promote future research and development of PDPMs in the field of drug carriers.

Coacervate-Assisted Polymerization-Induced Self-Assembly of Chiral Alternating Copolymers into Hierarchical Bishell Capsules with Sub-5 nm Ultrathin Lamellae

Hierarchical self-assembly of synthetic polymers in solution represents one of the sophisticated strategies to replicate the natural superstructures which lay the basis for their superb functions. However, it is still quite challenging to increase the degree of complexity of the as-prepared assemblies, especially in a large scale. Liquid-liquid phase separation (LLPS) widely exists in cells and is assumed to be responsible for the formation of many cellular organelles without membranes. Herein, through integrating LLPS with the polymerization-induced self-assembly (PISA), a coacervate-assisted PISA (CAPISA) methodology to realize the one-pot and scalable preparation of hierarchical bishell capsules (BCs) from nanosheets with ultrathin lamellae phase (sub-5 nm), microflakes, unishell capsules to final BCs in a bottom-up sequence is presented. Both the self-assembled structure and the dynamic formation process of BCs have been disclosed. Since CAPISA has combined the advantages of coacervates, click chemistry, interfacial reaction and PISA, it is believed that it will become a promising option to fabricate biomimetic polymer materials with higher structural complexity and more sophisticated functions.

Fluoropolymer Nanoparticles Synthesized via Reversible-Deactivation Radical Polymerizations and Their Applications

Fluorinated polymeric nanoparticles (FPNPs) combine unique properties of fluorocarbon and polymeric nanoparticles, which has stimulated massive interest for decades. However, fluoropolymers are not readily available from nature, resulting in synthetic developments to obtain FPNPs via free radical polymerizations. Recently, while increasing cutting-edge directions demand tailored FPNPs, such materials have been difficult to access via conventional approaches. Reversible-deactivation radical polymerizations (RDRPs) are powerful methods to afford well-defined polymers. Researchers have applied RDRPs to the fabrication of FPNPs, enabling the construction of particles with improved complexity in terms of structure, composition, morphology, and functionality. Related examples can be classified into three categories. First, well-defined fluoropolymers synthesized via RDRPs have been utilized as precursors to form FPNPs through self-folding and solution self-assembly. Second, thermally and photoinitiated RDRPs have been explored to realize in situ preparations of FPNPs with varied morphologies via polymerization-induced self-assembly and cross-linking copolymerization. Third, grafting from inorganic nanoparticles has been investigated based on RDRPs. Importantly, those advancements have promoted studies toward promising applications, including magnetic resonance imaging, biomedical delivery, energy storage, adsorption of perfluorinated alkyl substances, photosensitizers, and so on. This Review should present useful knowledge to researchers in polymer science and nanomaterials and inspire innovative ideas for the synthesis and applications of FPNPs.

Chemical Biology Approach to Reveal the Importance of Precise Subcellular Targeting for Intracellular Staphylococcus aureus Eradication

Intracellular bacterial pathogens, such as Staphylococcus aureus, that may hide in intracellular vacuoles represent the most significant manifestation of bacterial persistence. They are critically associated with chronic infections and antibiotic resistance, as conventional antibiotics are ineffective against such intracellular persisters due to permeability issues and mechanistic reasons. Direct subcellular targeting of S. aureus vacuoles suggests an explicit opportunity for the eradication of these persisters, but a comprehensive understanding of the chemical biology nature and significance of precise S. aureus vacuole targeting remains limited. Here, we report an oligoguanidine-based peptidomimetic that effectively targets and eradicates intracellular S. aureus persisters in the phagolysosome lumen, and this oligomer was utilized to reveal the mechanistic insights linking precise targeting to intracellular antimicrobial efficacy. The oligomer has high cellular uptake via a receptor-mediated endocytosis pathway and colocalizes with S. aureus persisters in phagolysosomes as a result of endosome-lysosome interconversion and lysosome-phagosome fusion. Moreover, the observation of a bacterium's altered susceptibility to the oligomer following a modification in its intracellular localization offers direct evidence of the critical importance of precise intracellular targeting. In addition, eradication of intracellular S. aureus persisters was achieved by the oligomer's membrane/DNA dual-targeting mechanism of action; therefore, its effectiveness is not hampered by the hibernation state of the persisters. Such precise subcellular targeting of S. aureus vacuoles also increases the agent's biocompatibility by minimizing its interaction with other organelles, endowing excellent in vivo bacterial targeting and therapeutic efficacy in animal models.

Palmitic acid- and cysteine-functionalized nanoparticles overcome mucus and epithelial barrier for oral delivery of drug

Nanoparticles (NPs) used for oral administration have greatly improved drug bioavailability and therapeutic efficacy. Nevertheless, NPs are limited by biological barriers, such as gastrointestinal degradation, mucus barrier, and epithelial barrier. To solve these problems, we developed the PA-N-2-HACC-Cys NPs loaded with anti-inflammatory hydrophobic drug curcumin (CUR) (CUR@PA-N-2-HACC-Cys NPs) by self-assembled amphiphilic polymer, composed of the N-2-Hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC), hydrophobic palmitic acid (PA), and cysteine (Cys). After oral administration, the CUR@PA-N-2-HACC-Cys NPs had good stability and sustained release under gastrointestinal conditions, followed by adhering to the intestine to achieve drug mucosal delivery. Additionally, the NPs could penetrate mucus and epithelial barriers to promote cellular uptake. The CUR@PA-N-2-HACC-Cys NPs could open tight junctions between cells for transepithelial transport while striking a balance between mucus interaction and diffusion through mucus. Notably, the CUR@PA-N-2-HACC-Cys NPs improved the oral bioavailability of CUR, which remarkably relieved colitis symptoms and promoted mucosal epithelial repair. Our findings proved that the CUR@PA-N-2-HACC-Cys NPs had excellent biocompatibility, could overcome mucus and epithelial barriers, and had significant application prospects for oral delivery of the hydrophobic drugs.

Self-assembly of sequence-regulated amphiphilic copolymers with alternating rod and coil pendants

We conducted a computational study on the self-assembly behavior of sequence-controlled amphiphilic copolymers with alternating rod and coil pendants. Complex self-assembled morphologies, such as onion-like vesicles with two layers, can be generated by introducing rod pendants. The amphiphilic alternating copolymers self-assemble into onion-like vesicles through a fusion process of tiny micelles and a bending operation of disk-like micelles with double layers. A stimuli-responsive simulation shows that the cylindrical vesicles can transform into onion-like vesicles by a rod-to-coil conformation transition of rigid pendants. Inspired by this finding, we conducted a drug-loading simulation by adding two reactive drugs at different stages and found that the onion-like vesicles can almost completely isolate two drugs. This work provides theoretical guidance on the self-assembly of amphiphilic alternating copolymers with rod and coil pendants for future experimental design.

Light-Triggered Polymersome-Based Anticancer Therapeutics Delivery

Polymersomes are biomimetic cell membrane-like model structures that are self-assembled stepwise from amphiphilic copolymers. These polymeric (nano)carriers have gained the scientific community's attention due to their biocompatibility, versatility, and higher stability than liposomes. Their tunable properties, such as composition, size, shape, and surface functional groups, extend encapsulation possibilities to either hydrophilic or hydrophobic cargoes (or both) and their site-specific delivery. Besides, polymersomes can disassemble in response to different stimuli, including light, for controlling the "on-demand" release of cargo that may also respond to light as photosensitizers and plasmonic nanostructures. Thus, polymersomes can be spatiotemporally stimulated by light of a wide wavelength range, whose exogenous response may activate light-stimulable moieties, enhance the drug efficacy, decrease side effects, and, thus, be broadly employed in photoinduced therapy. This review describes current light-responsive polymersomes evaluated for anticancer therapy. It includes light-activable moieties' features and polymersomes' composition and release behavior, focusing on recent advances and applications in cancer therapy, current trends, and photosensitive polymersomes' perspectives.

Thermo/pH dual-responsive micelles based on the host-guest interaction between benzimidazole-terminated graft copolymer and β-cyclodextrin-functionalized star block copolymer for smart drug delivery

Novel temperature and pH dual-sensitive amphiphilic micelles were fabricated exploiting the host-guest interaction between benzimidazole-terminated PHEMA-g-(PCL-BM) and β-CD-star-PMAA-b-PNIPAM. The fabricated graft copolymer had a brush-like structure with star side chains. The micelles were utilized as dual-responsive nanocarriers and showed the LCST between 40 and 41 °C. The acidic pH promoted the dissociation of the PHEMA-g-(PCL-BM: β-CD-star-PMAA-b-PNIPAM) micelles. DOX.HCl was loaded into the core of the micelles during self-assembly in an aqueous solution with a high encapsulation efficacy (97.3%). The average size of the amphiphilic micelles was about 80 nm, suitable size for the enhanced permeability and retention effect in tumor vasculature. In an aqueous environment, these micelles exhibited very good self-assembly ability, low CMC value, rapid pH- and thermo-responsiveness, optimal drug loading capacity, and effective release of the drug. The biocompatibility was confirmed by the viability assessment of human breast cancer cell line (MCF-7) through methyl tetrazolium assay. DOX-loaded micelles displayed excellent anti-cancer activity performance in comparison with free DOX.

Coarse-Grained Model of Thiol-Epoxy-Based Alternating Copolymers in Explicit Solvents

The cosolvent method has been widely used in the self-assembly of amphiphilic alternating copolymers (ACPs), but the role of good and selective solvents is rarely investigated. Here, we have developed a coarse-grained (CG) model for the widely studied thiol-epoxy-based amphiphilic ACPs and a three-bead CG model for tetrahydrofuran (THF) as the good solvent, which is compatible with the MARTINI water model. The accuracy of both the CG polymer and THF models was validated by reproducing the structural and thermodynamic properties obtained from experiments or atomistic simulation results. Density in bulk, the radius of gyration, and solvation free energy in water or THF showed a good agreement between CG and atomistic models. The CG models were further employed to explore the self-assembly of ACPs in THF/water mixtures with different compositions. Chain folding and liquid-liquid phase separation behaviors were found with increasing water fractions, which were the key steps of the self-assembly process. This work will provide a basic platform to explore the self-assembly of amphiphilic ACPs in solvent mixtures and to reveal the real role of different solvents in self-assembly.

Development of novel aptasensor for ultra-sensitive detection of myoglobin via electrochemical signal amplification of methylene blue using poly (styrene)-block-poly (acrylic acid) amphiphilic copolymer

Amplification of electrochemical signal in order to betterment of limit of detection in determination of biomarkers has an important role in early detection of some dangerous diseases such as cancers. For this purpose, in this research, two types of poly (styrene)-block-poly (acrylic acid) amphiphilic copolymer (PS₆₁-b-PAA₅₉₆ and PS₅₉₆-b-PAA₆₁) were synthesized by controlled radical polymerization method via reversible addition-fragmentation chain transfer polymerization (RAFT) technique. Chemical structure of block copolymers was confirmed by FT-IR spectroscopy and their surface morphology was assessed by scanning electron microscopy (SEM). Self-assembly of these block copolymers into polymeric vesicles (polymersomes), loading and release efficiency of methylene blue as an electroactive indicator were investigated in DMF and THF solvents. On the basis of our findings PS₆₁-b-PAA₅₉₆ has better capability for loading and release of MB than PS₅₉₆-b-PAA₆₁. Then the obtained methylene blue-loaded polymersome successfully used for development of an aptasensor toward determination of trace amounts of myoglobin. The proposed aptasensor showed a wide linear range from 1.0 aM to 1.0 μM with an ultra-low detection limit of 0.73 aM. Applying this amplification strategy, determination of myoglobin in real samples was successfully performed.

Ouzo phase occurrence with alternating lipo/hydrophilic copolymers in water

Selection of monomer couples, ensuring reactivity ratios close to zero, is an effective strategy to induce spontaneous copolymerization into an alternating sequence. In addition, monomer design and customisation of the solvent-monomer interactions open the way to functional copolymers showing molecular self-assembly relevant to their regular amphipathic structure. In this work, we show that the design of comonomers with adequate reactivities and interactions can be used to direct copolymer self-assembly on a mesoscopic scale. We investigate spontaneous formation of nanoparticles through solvent/non-solvent interactions using the so-called "ouzo effect". In this way, an ouzo diagram was built to determine the operation window for the self-assembly, in aqueous suspensions, of alternating copolymers consisting of vinyl phenol and maleimide units carrying long alkyl-pendant groups (C₁₂H₂₅ or C₁₈H₃₇). Also, investigations were pursued to account for the influence of the lateral lipophilic pendant units on the size and structure of the nanoaggregates formed during one-shot water addition. Structure characterisation by light scattering techniques (DLS and SLS), small-angle neutron scattering (SANS) and transmission electron microscopy (cryo-TEM and TEM) confirmed the self-assembly of copolymer chains into nanoparticles (size range: 60-300 nm), the size of which is affected by the lipophilicity of the alternating copolymers, solvent-water affinity and the solvent diffusion in water. Altogether, we present here the spontaneous ouzo effect as a simple method to produce stable alternating copolymer nanoparticles in water without the addition of stabilizing agents.

Asymmetric Vesicles Self-Assembled by Amphiphilic Sequence-Controlled Polymers

The asymmetric distribution of lipids on the inner and outer membranes of a cell plays a pivotal role in the physiological and immunological activities of life. It has inspired the elaboration of synthetic asymmetric vesicles for the discovery of advanced materials and functions. The asymmetric vesicles were generally prepared by amphiphilic block copolymers. We herein report on the formation of asymmetric vesicles self-assembled by amphiphilic sequence-controlled polymers with two hydrophilic segments SU and TEO. We also developed an efficient fluorescence titration method with europium(III) ions (Eu³⁺) to determine the uneven distribution of SU and TEO. SU units are preferentially located on the outer membrane and TEO on the inner membrane of the resulting vesicles, which is facilitated by the electrostatic repulsion of SU and the U-shaped folding of the hydrophobic backbone of the resulting polymers. This work shows that sequence-controlled polymers with alternating monomer sequence provide a powerful toolbox for the elaboration of important yet challenging self-assembled structures for emerging functions and properties.

A new method for detecting intramolecular H-bonds of aromatic amides based on the de-shielding effect of carbonyl groups on β-protons

Aromatic amide foldamers with highly predictable conformations possess potential for application in the fields of stereoselective recognition, charge transport and catalysis, whose conformations are commonly limited by the intramolecular hydrogen bonding between amide groups and hydrogen-bonding receptors. Herein, on the basis of the de-shielding effect of carbonyl groups on β-protons, we develop a new method for detecting intramolecular hydrogen bonds of aromatic amide compounds. The solvent-related changes in the βH chemical shifts (Δ(δβH)) and NH chemical shifts (Δ(δNH)) of three kinds of amide compounds, which are frequently used as building blocks of aromatic amide foldamers, were recorded in chloroform, nitromethane, acetonitrile and DMSO. The Δ(δβH) method is found to be highly suitable for studying methoxy-benzamides and fluoro-benzamides in chloroform and DMSO. It is worth noting that a reference compound is not required for applying the Δ(δβH) method, which is an advantage over the Δ(δNH) method. In addition, we extend the Δ(δNH) method from methoxy-benzamides to pyridine-carboxamides and fluoro-benzamides in chloroform and DMSO, and propose that nitromethane and acetonitrile will be possible alternatives for the Δ(δNH) method if a test compound is not soluble in chloroform.

Reduction-Induced Crystallization-Driven Self-Assembly of Main-Chain-Type Alternating Copolymers: Transformation from 1D Lines to 2D Platelets

In recent years, crystalline-driven self-assembly (CDSA) has received enormous attention, but almost only for block copolymers (BCPs). Herein, we introduced perfluorocarbon chains into main-chain-type liquid crystalline alternating copolymers (ACPs) to obtain perfluoroalkane-containing ACPs with periodic C-I bonds in polymer backbones via step transfer-addition and radical-termination (START) polymerization, followed by an iodine reduction reaction of C-I bonds to induce CDSA of ACPs and put forward a novel concept of "reduction-induced crystallization-driven self-assembly" (RI-CDSA) of main-chain-type ACPs for the first time. Finally, we proposed the folded-chain model and mechanism to explain the novel RI-CDSA behavior, and its rationality has been proved by the corresponding experimental results.

An alternatingly amphiphilic, resistance-resistant antimicrobial oligoguanidine with dual mechanisms of action

The increasing number of infections caused by multi-drug resistance (MDR) bacteria is an omen of a new global challenge. As one of the countermeasures under development, antimicrobial peptides (AMPs) and AMP mimics have emerged as a new family of antimicrobial agents with high potential, due to their low resistance generation rate and effectiveness against MDR bacterial strains resulted from their membrane-disrupting mechanism of action. However, most reported AMPs and AMP mimics have facially amphiphilic structures, which may lead to undesired self-aggregation and non-specific binding, as well as increased cytotoxicity toward mammalian cells, all of which put significant limits on their applications. Here, we report an oligomer with the size of short AMPs, with both hydrophobic carbon chain and cationic groups placed on its backbone, giving an alternatingly amphiphilic structure that brings better selectivity between mammalian and bacterial cell membranes. In addition, the oligomer shows affinity toward DNA, thus it can utilize bacterial DNA located in the vulnerable nucleoid as the second drug target. Benefiting from these designs, the oligomer shows higher therapeutic index and synergistic effect with other antibiotics, while its low resistance generation rate and effectiveness on multi-drug resistant bacterial strains can be maintained. We demonstrate that this alternatingly amphiphilic, DNA-binding oligomer is not only resistance-resistant, but is also able to selectively eliminate bacteria at the presence of mammalian cells. Importantly, the oligomer exhibits good in vivo activity: it cleans all bacteria on Caenorhabditis elegans without causing apparent toxicity, and significantly improves the survival rate of mice with severely infected wounds in a mice excision wound model study.

Exploration and insights into the cellular internalization and intracellular fate of amphiphilic polymeric nanocarriers

The beneficial or deleterious effects of nanomedicines emerge from their complex interactions with intracellular pathways and their subcellular fate. Moreover, the dynamic nature of plasma membrane accounts for the movement of these nanocarriers within the cell towards different organelles thereby not only influencing their pharmacokinetic and pharmacodynamic properties but also bioavailability, therapeutic efficacy and toxicity. Therefore, an in-depth understanding of underlying parameters controlling nanocarrier endocytosis and intracellular fate is essential. In order to direct nanoparticles towards specific sub-cellular organelles the physicochemical attributes of nanocarriers can be manipulated. These include particle size, shape and surface charge/chemistry. Restricting the particle size of nanocarriers below 200 nm contributes to internalization via clathrin and caveolae mediated pathways. Similarly, a moderate negative surface potential confers endolysosomal escape and targeting towards mitochondria, endoplasmic reticulum (ER) and Golgi. This review aims to provide an insight into these physicochemical attributes of nanocarriers fabricated using amphiphilic graft copolymers affecting cellular internalization. Fundamental principles understood from experimental studies have been extrapolated to draw a general conclusion for the designing of optimized nanoparticulate drug delivery systems and enhanced intracellular uptake via specific endocytic pathway.

Transition of Ultrathick Polyamide Tubes into Vesicles with Great Stability

This work reports on the transition of a polyamide ultrathick wall microtubes to microvesicles through self-assembly. An amphiphilic polyamide is synthesized first by the solution polycondensation of sodium isophthalate-5-sulfonate (SIPA) and poly(propylene glycol) bis(2-aminopropyl ether) 2000. Then, its self-assembly in aqueous solution is investigated through direct hydration. The size and morphology of the self-assemblies is investigated by transmission electron microscope (TEM), scanning electron microscope (SEM), atomic force microscope (AFM), and optical microscope (OM) measurements. The result shows that the as-prepared polyamide first self-assembles to thick walled tubes, then these tubes can gradually evolve to ultrathick wall microvesicles with an unusually thick membrane above 330 nm. Both the transition pathway and the mechanism are investigated in micromicroscopy. Most importantly, the microvesicles show great thermal and chemical stability. The novel superstable self-assembly structures as well as the transition mechanism presented here offer a promising perspective for the application in the scope of the biological membrane movements and nanoelectromechanics in medical devices.

Amphiphilic Organic Cages: Self-Assembly into Nanotubes and Enhanced Anion-π Interactions

An amphiphilic organic cage was synthesized and used as self-assembly synthon for the fabrication of novel functional supramolecular structures in solution. The transmission electron microscopy (TEM) results showed that this amphiphilic cage self-assembled in aqueous solution into unilamellar nanotubes with a diameter of 29±4 nm at a concentration of 0.05 mg mL^-1 . Interestingly, the self-assembly of this cage significantly enhanced the anion-π interactions as indicated by a remarkable increasement of association constant (K_a ) between Cl^- and this amphiphilic cage after self-assembly. In specific, K_a was increased from 223 M^-1 for discrete cages in methanol to 6800 M^-1 for aggregated cages after self-assembly in water at the same concentration of 2.26×10^-5  M. A mechanism based on a synergistic effect was proposed in order to explain this self-assembly process through enhanced anion-π interactions.

Super stable giant tubes with densely packed multilayer ultrathick membranes self-assembled from amphiphilic polyamide

This work reports on the preparation of giant tubes with millimeter-scale length, micron diameter and ultrathick walls above 250 nm, from the aqueous self-assembly of a novel amphiphilic polyamide. Most interestingly, the tubes display great chemical and thermal stability.

Self-assembly of pendant functional groups grafted PEDOT as paracetamol detection material

In this paper, pendant functional group grafted EDOTs, such as EDOTCH₂NH₂, EDOTCH₂OH and EDOTCH₂SH, were selected as monomers for the preparation of their respective polymers via a common chemical oxidative polymerization method in the absence of CTAB by varying the [monomer]/[oxidant] ratios. The self-assembly mechanism of the polymers was systematically studied by discussing the hydrogen bonding effect, acidity and electron-donating ability, as well as the chain initiation and chain growth of the chemically oxidated polymerized monomers. These functional group grafted PEDOTs were applied to the electrochemical determination of paracetamol (PAR) to further investigate the effect of the pendant functional groups (-SH, -OH, -NH₂) on the electrochemical sensing behaviour of the polymers. The results indicated that the hydrogen bonding effect of the pendant functional groups was vital to the self-assembly of the polymer chains, and the PEDOTs with -OH and -SH groups had a tendency to self-assemble into a spherical structure, while the PEDOT with an -NH₂ group exhibited a fibrous structure. The electrochemical response of PEDOTs with functional groups was better than that that of PEDOT alone, and the highest electrochemical response was observed in PEDOT with an -SH group ([monomer]/[oxidant] = 1 : 8).

Scalable preparation of crystalline nanorods through sequential polymerization-induced and crystallization-driven self-assembly of alternating copolymers

We report a two-step sequential polymerization-induced and crystallization-driven self-assembly (sequential PI/CDSA) of alternating copolymers to prepare micron-length crystalline nanorods with an ultrathin lamellar structure on a large scale.

High-χ alternating copolymers for accessing sub-5 nm domains via simulations

Based on molecular dynamics simulations, we designed novel high-χ alternating copolymers (ACPs) for fabricating sub-5 nm domains.

Biobased thermosensitive polyrotaxanes constructed by polymerization of cyclodextrin-triterpenoid inclusion complexes

Three biobased thermosensitive polyrotaxanes with alternating multiblock structures have been constructed through polymerization of inclusion complexes in a convenient tandem way.

Sequence isomerism in uniform polyphosphoesters programmes self-assembly and folding

Perfectly sequence-defined macromolecules have been synthesised through the phosphoramidite method. Sequence isomerism determines self-assembly giving a raft of unusual nanostructures.

Orthogonal functionalization of alternating polyesters: selective patterning of (AB) n sequences

Precision functionalized polyesters, with defined monomer sequences, are prepared using an orthogonal post-polymerization strategy. These polyesters can be synthesized from bio-derived monomers and are targeted to degrade, by hydrolysis processes, to biocompatible diols and diacids; the new structures enabled by this methodology would be very difficult to synthesize by alternative strategies. A series of 9 well-defined highly alternating AB-type copolyesters, containing terminal and internal alkene functionalities, are synthesized in high conversions by the ring-opening copolymerization of epoxides and cyclic anhydrides. Firstly, the polyesters are functionalized by a selective hydroboration-oxidation reaction to exclusively and quantitatively hydroxylate the terminal alkenes, leaving the alternating internal alkenes unreacted. Subsequently, the internal alkenes are quantitatively transformed into carboxylic acid, amine, alkyl and oligo-ether groups, by thiol-ene reactions, to afford AB polyesters with alternating functional substituents. Three polyesters showing alternating hydrophilic/hydrophobic side-chain sequences self-assemble in solution to form nanostructures that are characterized using transmission electron microscopy and dynamic light scattering methods (R h = 100-300 nm). The selective patterning methodology provides facile, efficient and orthogonal functionalization of alternating polyesters with near-quantitative (AB) n repeat sequences. The method is expected to be generalizable to other polymers and provides access to completely new AB alternating structures with the potential to exploit ligand multi-valency and adjacency to enhance properties.

Solution self-assembly behavior of rod-alt-coil alternating copolymers via simulations

The self-assembly behaviors of rod-alt-coil alternating copolymers were systematically investigated by employing dissipative particle dynamics simulations.