Living 3,4‐(Co)Polymerization of Isoprene/Myrcene and One‐Pot Synthesis of a Polyisoprene Blend Catalyzed by Binuclear Rare‐Earth Metal Amidinate Complexes

Bis(phosphinophenyl)amido-Ligated Binuclear Rare-Earth Metal Complexes for Highly cis-1,4-Selective Polymerization of 1,3-Conjugated Dienes

A series of binuclear rare-earth metal complexes based on the ligands containing bis(phosphinophenyl)amido-PNP unit are successfully synthesized. All the ligands and the corresponding binuclear complexes are fully characterized by NMR spectra (1H, 13C, and 31P). In conjunction with [Ph3C][B(C6F5)4], all the binuclear complexes exhibited high catalytic activity and high cis-1,4-selectivity (>99%) toward the polymerization of 1,3-conjugated dienes (isoprene, β-myrcene and β-farnesene) with excellent livingness at room temperature or even 80 °C.

Binuclear Enamino-Oxazolinate Rare-Earth Metal Complexes: Synthesis and Their Catalytic Performance in Isoprene Polymerization

We have synthesized a series of binuclear rare-earth metal complexes bearing the newly designed enamino-oxazolinate ligands that feature bridging para-phenyl, meta-phenyl, 1,5-naphthalenyl, and 1,5-anthracenyl moieties. NMR and X-ray diffraction analyses confirmed the binuclear structures of the obtained complexes with two enamino-oxazolinate-metal units located at a trans position against the bridged aryl plane. After activation by [Ph3C][B(C6F5)4], all the rare-earth metal complexes served as efficient catalysts for isoprene polymerization, producing polymers with high cis-1,4 regularity (up to 96.1%) and high molecular weight. The steric and electronic effects exerted on the active metal centers, as well as the radius of metal centers, were the major contributing factors for determining both the catalytic activity and cis-1,4-selectivity of the binuclear catalytic systems. Compared to its mononuclear analogue, the binuclear yttrium catalytic system with a para-phenyl bridge exhibited a higher thermostability and catalytic efficiency during polymerization, revealing a special binuclear effect in this binuclear catalytic system.

Twisted and Disconnected Chains: Flexible Linear Tetracuprous Arrays and a Decanuclear CuI Cluster as Blue- and Green/Yellow-Light Emitters

Defined arrays of transition metal ions embedded in tailored polydentate ligand scaffolds allow for a systematic design of their physical properties. Such molecular strings of closed-shell transition metal centers are particularly interesting for Group 11 metal ions in the oxidation state +1 if they undergo metallophilic d10···d10 contact interactions since these clusters are oftentimes efficient photoluminescence (PL) emitters. Copper is particularly attractive as a sustainable earth-abundant coinage metal source and because of the ability of several CuI complexes to serve as powerful thermally activated delayed fluorescence (TADF) emitters in molecular/organic light-emitting devices (OLEDs). Our combined synthetic, crystallographic, photophysical, and computational study describes a straight tetracuprous array possessing a centrally disconnected CuI2···CuI2 chain and a continuous helically bent CuI4 complex. This molecular helix undergoes a facile rearrangement in diethyl ether solution, yielding an unprecedented nanosized CuI10 cluster (2.9 × 2.0 nm) upon crystallization. All three clusters show either bright blue phosphorescence, TADF, or green/yellow multiband phosphorescence with quantum yields between 6.5 and 67%, which is persistent under hydrostatic pressure up to 30 kbar. Temperature-dependent PL investigations in combination with time-dependent density-functional theory (TD-DFT) calculations and void space analyses of the crystal packings complement a comprehensive correlation between the molecular structures and photoluminescence properties.

Rare-Earth Metal Complexes Supported by A Tridentate Amidinate Ligand: Synthesis, Characterization, and Catalytic Comparison in Isoprene Polymerization

To systematically investigate the dependence of the initiating group and metal size on polymerization performance, a family of rare-earth metal bis(alkyl)/bis(benzyl)/bis(amide) complexes supported by a monoanionic tridentate amidinate ligand [(2,6-iPr2C6H3)NC(Ph)N(C6H4-2-OMe]- (HL) were synthesized and well-characterized. Treatment of rare-earth metal tris(alkyl)/tris(benzyl)/tris(amide) complexes Y(CH2C6H4NMe2-o)3 or Y(CH2SiMe3)3(THF)2 or Ln[N(SiHMe2)2]3(THF)x (Ln = Sc, x = 1; Ln = Y, La, Sm, Lu, x = 2) with 1 equiv of HL gave the corresponding mono(amidinate) rare-earth metal bis(alkyl)/bis(benzyl)/bis(amide) complexes [(2,6-iPr2C6H4)NC(Ph)N(C6H4-2-OMe)]Y(CH2C6H4NMe2-o)2 (1), [(2,6-iPr2C6H4)NC(Ph)N(C6H4-2-OMe)]Y(CH2SiMe3)2(THF) (2), and [(2,6-iPr2C6H4)NC(Ph)N(C6H4-2-OMe)]Ln[N(SiHMe2)2]2(THF)n (Ln = Y, n = 1 (3); Ln = La, n = 1 (4); Ln = Sc, n = 0 (5); Ln = Lu, n = 0 (6); Ln = Sm, n = 0 (7)) in good isolated yields. These complexes were characterized by elemental analysis, NMR spectroscopy, and single-crystal X-ray diffraction. In the presence of excess AlMe3 and on treatment with 1 equiv of [Ph3C][B(C6F5)4], these complexes could serve as precatalysts for cationic polymerization of isoprene, in which the dependence of the polymerization activity and regioselectivity on the initiating group and metal size was observed.

Preparation and Characterization of Soft-Hard Block Copolymer of 3,4-IP-b-s-1,2-PBD Using a Robust Iron-Based Catalyst System

A series of well-defined diblock copolymers, namely, 3,4-polyisoprene-block-syndiotactic-1,2-polybutadiene (3,4-PI-b-s-1,2-PBD), with a soft-hard block sequence were synthesized via an in situ sequential polymerization process using a robust iron-based catalytic system Fe(acac)3/(isocyanoimino) triptenylphosphorane (IITP)/AliBu3. This catalyst exhibits vigorous activity and temperature tolerance, achieving a polymerization activity of 5.41 × 106 g mol(Fe)-1 h-1 at 70 °C with a [IP]/[Fe] ratio of 15,000. Moreover, the quasi-living polymerization characteristics of the catalyst were verified through kinetic experiments. The first-stage polymerization of isoprene (IP) is performed at 30 °C to give a soft 3,4-PI block, and then a quantitative amount of 1,3-butadiene was added in situ to the quasi-living polymerization system to produce a second hard s-1,2-PBD. The s-1,2-PBD segments in block copolymers display a rodlike morphology contrasting with the spherulitic morphology characteristic of s-1,2-PBD homopolymers. The precise tunability of the length of the soft and hard chain segments of these novel elastic materials with the feed ratio of IP and BD, endowing them with outstanding mechanical properties and excellent dynamic mechanical properties, which are expected to be promising high-performance rubber materials.

Polymerization of Myrcene in Both Conventional and Renewable Solvents: Postpolymerization Modification via Regioselective Photoinduced Thiol-Ene Chemistry for Use as Carbon Renewable Dispersants

Polymeric dispersants are useful materials used in many different industries and often derived from oil-based chemicals, for example, in automotive fluids so as to prevent particulates from precipitation and causing potential damage. These are very often polyisobutene derivatives, and there is a growing need to replace these using chemicals using renewable resources such as the use of naturally occurring myrcene. Polymyrcene (PMy), with an ordered microstructure, has been successfully synthesized via both anionic and radical polymerization in different solvents and subsequently subjected to functionalization via photoinduced thiol-ene click reactions with a number of thiols, methyl thioglycolate, 3-mercaptopropionic acid, 3-mercapto-1-hexanol, 2-mercaptoethanol, and 1-thioglycerol, using 2,2-dimethoxy-2-phenylacetophenone as a photoinitiator under UV irradiation (λ = 365 nm) at ambient temperature. The polarity of the solvent has an important impact on the microstructure of the produced polymyrcene and, in particular, 1,2-unit (∼4%), 3,4-unit (∼41%), and 1,4-unit (∼51%) PMy were obtained via anionic polymerization in a polar solvent (THF) at ambient temperature, while 3,4-unit (∼6%) and 1,4-unit (∼94%, including cis and trans) PMy were obtained with cyclohexane as the solvent. Subsequently, photochemical thiol-ene reactions were carried out on the resulting PMy with different isomers exhibiting different reactivities of the double bonds. This strategy allows for the introduction of functional/polar groups (-COOH, -OH) into hydrophobic PMy in a controlled process. Hydrogenation of PMy and derivatized PMy was carried out to investigate any effects on the stabilities of the products which are desirable for many applications.

Hydrogen bonds and dispersion forces serving as molecular locks for tailored Group 11 bis(amidine) complexes

A flexible polydentate bis(amidine) ligand LH2 operates as a molecular lock for various coinage metal fragments and forms the dinuclear complexes [LH2(MCl)2], M = Cu (1), Au (2), the coordination...

Synthesis, structure, and coordination chemistry of a neutral pyrrolyl-functionalized amidinate ligand

A new o-phenylene-bridged ligand incorporating neutral pyrrolyl and amidino moieties was designed and synthesized. The reactivity of the ligand was investigated and showed versatile coordination modes towards alkali- and rare-earth metals.

Stereoregular Polymerization of Acyclic Terpenes

The growing environmental pollution and the expected depleting of fossil resources have sparked interest in recent years for polymers obtained from monomers originating from renewable sources. Furthermore, nature can provide a variety of building blocks with special structural features (e. g. side groups or stereo-elements) that cannot be obtained so easily via fossil-based pathways. In this context, terpenes are widespread natural compounds coming from non-food crops, present in a large variety of structures, and ready to use as monomers with or without further modifications. The present review aims to provide an overview of how chemists can stereospecifically polymerize terpenes, particularly the acyclic ones like myrcene, ocimene, and farnesene, using different metal catalyst systems in coordination-insertion polymerization. Attention is also paid to their copolymers, which have recently been disclosed, and to the possible applications of these bio-based materials in various industrial sectors such as in the field of elastomers. © 2021 The Authors. ChemPlusChem published by Wiley-VCH GmbH. This is an open access article under the terms of the Creative Commons Attribution Non-Commercial License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.

Introducing random bio-terpene segments to high cis-polybutadiene: making elastomeric materials more sustainable

In this work, we explore the statistical copolymerization of 1,3-butadiene with the terpenic monomers myrcene and farnesene, carried out via coordination polymerization using a neodymium-based ternary catalytic system. The resultant copolymers, poly(butadiene-co-myrcene) and poly(butadiene-co-farnesene), were synthesized at different monomer ratios, elucidating the influence of the bio-based monomer content over the kinetic variables, molecular and thermal properties, and the reactivity constants (Fineman-Ross and Kelen-Tüdös methods) of the resultant copolymers. The results indicate that through the herein employed conditions, it is possible to obtain "more sustainable" high-cis (≈95%) polybutadiene elastomers with random and tunable content of bio-based monomer. Moreover, the polymers exhibit fairly high molecular weights and a rather low dispersity index. Upon copolymerization, the T g of high-cis PB can be shifted from -106 to -75 °C (farnesene) or -107 to -64 °C (myrcene), without altering the microstructure control. This work contributes to the development of more environmentally friendly elastomers, to form "green" rubber materials.

Ligands with Two Monoanionic N,N-Binding Sites: Synthesis and Coordination Chemistry

Polytopic ligands have become ubiquitous in coordination chemistry because they grant access to a variety of mono- and polynuclear complexes of transition metals as well as rare-earth and main-group elements. Nitrogen-based ditopic ligands, in which two monoanionic N,N-binding sites are framed within one molecule, are of particular importance and are therefore the primary focus of this review. In detail, bis(amidine)s, bis(guanidine)s, bis(β-diimine)s, bis(aminotroponimine)s, bis(pyrrolimine)s, and miscellaneous bis(N,N-chelating) ligands are reviewed. In addition to the general synthetic protocols, the application of these ligands is discussed along with their coordination chemistry, the multifarious binding modes, and the ability of these ligands to bridge two (or more) metal(loids).

Lutetium and yttrium complexes supported by an anilido-oxazoline ligand for polymerization of 1,3-conjugated dienes and ε-caprolactone

Lutetium and yttrium complexes supported by an anilido-oxazoline ligand exhibit highcis-1,4 stereoselectivity for 1,3-conjugated diene polymerization and high activity for ring-opening polymerization of ε-caprolactone.

Mono- and bimetallic amidinate samarium complexes - synthesis, structure, and hydroamination catalysis

In order to investigate the difference between mono- and bimetallic systems in the catalytic hydroamination/cyclization reaction two mono- and bimetallic amidinate samarium catalysts, featuring comparable coordination environments, were synthesized. Both systems comprise two {N(SiMe₃)₂}^- leaving groups to minimize the steric influence of the corresponding amidinate ligand. The bimetallic system is based on a bis(amidinate) 4,6-dibenzofuran derivative, while N,N'-bis(2,6-diisopropylphenyl)benzamidinate was employed as ligand for the monometallic catalyst. For the hydroamination/cyclization reaction five different substrates were investigated. Additionally, kinetic studies were carried out to gain deeper understanding of the mechanism.