Cobalt-Catalyzed Aqueous Dehydrogenation of Formic Acid

CO-Tolerant Heterogeneous Ruthenium Catalysts for Efficient Formic Acid Dehydrogenation

The development of improved and less costly catalysts for dehydrogenation of formic acid (HCOOH) is of general interest for renewable energy technologies involving hydrogen storage and release. Theoretical calculations reveal that ruthenium (Ru) nanoparticles supported on nitrogen-doped carbon should be appropriate catalysts for such transformations. It is predicted that nitrogen doping significantly decreases the formation of CO, but at the same time increases CO tolerance of the catalysts. To prove these hypotheses heterogeneous ruthenium catalysts supported on porous nitrogen-doped carbon (Rux/CN) with hierarchical structure were synthesized using carbon nitride (C3N4) as template and phenanthroline (Phen) as ligand. Experimental tests in HCOOH dehydrogenation revealed that the optimal catalyst Ru7/CN exhibited good thermal stability at 140 °C and a high turnover frequency (TOF >1300 h-1), which is more than one order of magnitude higher than that of the commercial Ru5/C catalyst.

Theoretical Study of the Reversible Hydrogenation of Carbon Dioxide to Formate on Mn-Pincer Complexes

Recently, Beller and coworkers reported a study on the reversible hydrogenation of CO2 to formic acid using a Mn(I)-PN5P complex. In this paper, we performed DFT calculations to understand the mechanism for this reversible reaction occurring on the Mn-PN5P, Mn-PN3P, and Mn-PNP catalysts. Through investigating in detail two possible routes for CO2 hydrogenation to formic acid, we noticed that the production of formic acid is not thermodynamically favorable. The CO2 reversible hydrogenation actually takes place between CO2/H2 and formate rather than formic acid, although in the beginning of the process formic acid is used. By comparing three pincer ligands (PN5P, PN3P, and PNP), it can be found that the Mn-PN3P and Mn-PNP complexes are favorable for the dehydrogenation of formic acid, but relatively unfavorable for the hydrogenation of CO2. Only the PN5P ligand can balance the forward and reverse reactions, showing the best catalytic activity for CO2 reversible hydrogenation to formic acid. Our computational results support the experimental work of Beller and coworkers and can explain the advantage of the PN5P ligand. This paper could be of benefit for promoting the application of the PN5P ligand in realizing the reversible H2 storage-release cycle.

Hydrogen Production by the Ruthenium(II) Complex Bearing a Bulky PNP Ligand: A Catalyst for the Decomposition of Formic Acid and/or Ammonium Formate

The five-coordinate complex [RuCl2(PNP)] (1) was synthesized from the binuclear [RuCl2(p-cym)]2 with a PNP-type ligand (PNP = 3,6-di-tert-butyl-1,8-bis(diisopropylphosphino)methyl)-9H-carbazole - (Cbzdiphos i Pr)H) in a toluene solution, within 20 h at 110 °C, producing a green solid, which was precipitated with a 1/1 mixture of n- pentane/HMDSO. The complex was characterized by NMR-1H, 13C, and 31P{1H}, mass spectroscopy-LIFDI, FTIR, UV/vis spectroscopy, and cyclic voltammetry, as well as a description of the optimized structure by DFT calculation. The reactivity of 1 was investigated in the presence of potassium triethylborohydride (KBEt3H, in THF solution of 1.0 mol L-1) and ammonium formate (NH4HCO2), producing an in situ hydride complex and a formate intermediate species coordinated to the ruthenium center. The complex 1, loaded with 0.08%, catalyzed the decomposition of ammonium formate (AF) into H2, CO2, and NH3 in THF solutions at 80 °C, with 94% of H2 and TOF = 206 h-1 (molar ratio [Ru]/AF = 1/1204). The catalytic activity increased remarkably for the decomposition of formic acid (FA) as a substrate to produce H2 and CO2. In the HMDSO solution at 80 °C, a conversion of 100% was obtained in relation to H2 and TOF = 3010 h-1 (molar ration [Ru]/FA/NEt3 = 1/1204/843). In an equimolar mixture of AF/FA in HMDSO solution at 80 °C, without additives, the complex 1 catalyzed the decomposition of both with 100% of H2 and TOF = 987 h-1 (molar ratio [Ru]/AF/FA= 1/602/602). Under the later conditions, as well as upon AF decomposition, carbamic acid [HO(C=O)NH2] was obtained as a coproduct of a secondary reaction between NH3 and CO2 (yield = 50% in relation to the amount of AF). A kinetic study for decomposing FA, in the range of 60-100 °C, provided ΔS‡ = -9.7 e.u, ΔG‡ = 13.35 kJ mol-1, and E a = 64 kJ mol-1, suggesting that the mechanism is more associative than for the known complexes.

Mechanistic Investigation into Copper(I) Hydride Catalyzed Formic Acid Dehydrogenation

Copper(I) hydride complexes are typically known to react with CO2 to form their corresponding copper formate counterparts. However, recently it has been observed that some multinuclear copper hydrides can feature the opposite reactivity and catalyze the dehydrogenation of formic acid. Here we report the use of a multinuclear PNNP copper hydride complex as an active (pre)catalyst for this reaction. Mechanistic investigations provide insights into the catalyst resting state and the rate-determining step and identify an off-cycle species that is responsible for the unexpected substrate inhibition in this reaction.

State-of-the-Art Light-Driven Hydrogen Generation from Formic Acid and Utilization in Enzymatic Hydrogenations

A concept of combining photocatalytically generated hydrogen with green enzymatic reductions is demonstrated. The developed photocatalytic formic acid (FA) dehydrogenation setup based on Pt(x)@TiO2 shows stable hydrogen generation activity, which is two orders of magnitude higher than reported values of state-of-the-art systems. Mechanistic studies confirm that hydrogen generation proceeds via a photocatalytic pathway, which is entirely different from purely thermal reaction mechanisms previously reported. The viability of the presented approach is demonstrated by the synthesis of value-added compounds 3-phenylpropanal and (2R, 5S)-dihydrocarvone at ambient pressure and room temperature, which should be applicable for many other hydrogenation processes, e. g., for the preparation of flavours and fragrance compounds, as well as pharmaceuticals.

Transition metal pincer catalysts for formic acid dehydrogenation: a mechanistic perspective

The storage and transportation of hydrogen gas, a non-polluting alternative to carbon-based fuels, have always been challenging due to its extreme flammability. In this regard, formic acid (FA) is a promising liquid organic hydrogen carrier (LOHC), and over the past decades, significant progress has been made in dehydrogenating FA through transition metal catalysis. In this review, our goal is to provide a detailed insight into the existing processes to expose various mechanistic challenges associated with FA dehydrogenation (FAD). Specifically, methodologies catalyzed by pincer-ligated metal complexes were chosen. Pincer ligands are preferred as they provide structural rigidity to the complexes, making the isolation and analysis of reaction intermediates less challenging and consequently providing a better mechanistic understanding. In this perspective, the catalytic activity of the reported pincer complexes in FAD was overviewed, and more importantly, the catalytic cycles were examined in detail. Further attention was given to the structural modifications, role of additives, reaction medium, and their crucial effects on the outcome.

Formic acid stability in different solvents by DFT calculations

CONTEXT

New technologies have been developed toward the use of green energies. The production of formic acid (FA) from carbon dioxide (CO[Formula: see text]) hydrogenation with H[Formula: see text] is a sustainable process for H[Formula: see text] storage. However, the FA adduct stabilization is thermodynamically dependent on the type of solvent and thermodynamic conditions. The results suggest a wide range of dielectric permittivity values between the dimethyl sulfoxide (DMSO) and water solvents to stabilize the FA in the absence of base. The thermodynamics analysis and the infrared and charge density difference results show that the formation of the FA complex with H[Formula: see text]O is temperature dependent and has a major influence on aqueous solvents compared to the FA adduct with amine, in good agreement with the experiment. In these conditions, the stability thermodynamic of the FA molecule may be favorable at non-organic solvents and dielectric permittivity values closer to water. Therefore, a mixture of aqueous solvents with possible ionic composition could be used to increase the thermodynamic stability of H[Formula: see text] storage in CO[Formula: see text] conversion processes.

METHODS

Using the Quantum ESPRESSO package, density functional theory (DFT) calculations were performed with periodic boundary conditions, and the electronic wave functions were expanded in plane waves. For the exchange-correlation functional, we use the vdW-DF functional with the inclusion of van der Waals (vdW) forces. Electron-ion interactions are treated by the projector augmented wave (PAW) method with pseudopotentials available in the PSlibrary repository. The wave functions and the electronic densities were expanded employing accurate cut-off energies of 6.80[Formula: see text]10[Formula: see text] and 5.44[Formula: see text]10[Formula: see text] eV, respectively. The electronic density was computed from the wave functions calculated at the [Formula: see text]-point in the first Brillouin-zone. Each structural optimization was minimized according to the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm, with force and energy convergence criteria of 25 meV[Formula: see text]Å[Formula: see text] and 1.36 meV, respectively. The electrostatic solvation effects were performed by the [Formula: see text] package with the Self-Consistent Continuum Solvation (SCCS) approach.

Catalytic Dehydrogenation of Formic Acid Promoted by Triphos-Co Complexes: Two Competing Pathways for H2 Production

In this study, we reported the synthesis and structural characterization of a triphos-CoII complex [(κ3-triphos)CoII(CH3CN)2]2+ (1) and a triphos-CoI-H complex [(κ2-triphos)HCoI(CO)2] (4). The facile synthetic pathways from 1 to [(κ3-triphos)CoII(κ2-O2CH)]+ (1') and [(κ3-triphos)CoI(CH3CN)]+ (2), respectively, as well as the interconversion between [(κ3-triphos)CoI(CO)2]+ (3) and 4 have been established. The activation energy barrier, associated with the dehydrogenation of a coordinated formate fragment in 1' yielding the corresponding 2 accompanied by the formation of H2 and CO2, was experimentally determined as 23.9 kcal/mol. With 0.01 mol % loading of 1, a maximum TON ∼ 1735 within 18 h and TOF ∼ 483 h-1 for the first 3 h could be achieved. Kinetic isotope effect (KIE) values of 2.25 (kHCOOH/kDCOOH) and 1.36 (kHCOOH/kHCOOD) for the dehydrogenation of formic acid and its deuterated derivatives, respectively, implicate that the H-COOH bond cleavage is likely the rate-determining step. The catalytic mechanism proposed by density functional theory (DFT) calculations coupled with experimental 1H NMR and gas chromatography-mass spectrometry (GC-MS) analysis unveils two competing pathways for H2 production; specifically, deprotonating a HCOO-H bond by a proposed Co-H intermediate C and homolytic cleavage of the CoII-H moiety of C, presumably via a dimeric Co intermediate D containing a [Co2(μ-H)2]2+ core, to yield the corresponding 2 and H2.

Formate dehydrogenase activity by a Cu(II)-based molecular catalyst and deciphering the mechanism using DFT studies

Due to the requirement to establish renewable energy sources, formic acid (FA), one of the most probable liquid organic hydrogen carriers (LOHCs), has received great attention. Catalytic formic acid dehydrogenation in an effective and environmentally friendly manner is still a challenge. The N3Q3 ligand (N3Q3 = N,N-bis(quinolin-8-ylmethyl)quinolin-8-amine) and the square pyramidal [Cu(N3Q3)Cl]Cl complex have been synthesised in this work and characterised using several techniques, such as NMR spectroscopy, mass spectrometry, EPR spectroscopy, cyclic voltammetry, X-ray diffraction and DFT calculations. This work investigates the dehydrogenation of formic acid using a molecular and homogeneous catalyst [Cu(N3Q3)Cl]Cl in the presence of HCOONa. The mononuclear copper complex exhibits catalytic activity towards the dehydrogenation of formic acid in H2O with the evolution of a 1 : 1 CO2 and H2 mixture. The activation energy of formic acid dehydrogenation was calculated to be Ea = 86 kJ mol-1, based on experiments carried out at various temperatures. The Gibbs free energy was found to be 82 kJ at 298 K for the decomposition of HCOOH. The DFT studies reveal that [Cu(N3Q3)(HCOO-)]+ undergoes an uphill process of rearrangement followed by decarboxylation to generate [Cu(N3Q3)(H-)]+. The initial uphill step for forming a transition state is the rate-determining step. The [Cu(N3Q3)(H-)]+ follows an activated state in the presence of HCOOH to liberate H2 and generate the [Cu(N3Q3)(OH2)]2+.

Recent advances of Cp*Ir complexes for transfer hydrogenation: focus on formic acid/formate as hydrogen donors

Transfer hydrogenation reactions offer synthetically powerful strategies to deliver various hydrogenated compounds with the advantages of efficiency, atom economy, and practicability. On one hand, formic acid/formate function as promising hydrogen sources owing to their readily obtainable, inexpensive, and easy to handle nature. On the other hand, Cp*Ir complexes show high activities in transfer hydrogenation. This review highlights progress achieved for transfer hydrogenation of CO, CC, and CN bonds of a variety of unsaturated substrates, as well as amides focusing on Cp*Ir complexes as catalysts and formic acid/formate as hydrogen sources.

Efficient [Fe-Imidazole@SiO2] Nanohybrids for Catalytic H2 Production from Formic Acid

Three imidazole-based hybrid materials, coded as IGOPS, IPS and impyridine@SiO₂ nanohybrids, were prepared via the covalent immobilization of N-ligands onto a mesoporous nano-SiO₂ matrix for H₂ generation from formic acid (FA). BET and HRTEM demonstrated that the immobilization of the imidazole derivative onto SiO₂ has a significant effect on the SSA, average pore volume, and particle size distribution. In the context of FA dehydrogenation, their catalytic activity (TONs, TOFs), stability, and reusability were assessed. Additionally, the homologous homogeneous counterparts were evaluated for comparison purposes. Mapping the redox potential of solution E_h vs. SHE revealed that poly-phosphine PP₃ plays an essential role in FA dehydrogenation. On the basis of performance and stability, [Fe²⁺/IGOPS/PP₃] demonstrated superior activity compared to other heterogeneous catalysts, producing 9.82 L of gases (VH₂ + CO₂) with TONs = 31,778, albeit with low recyclability. In contrast, [Fe²⁺/IPS/PP₃] showed the highest stability, retaining considerable performance after three consecutive uses. With VH₂ + CO₂ = 7.8 L, [Fe²⁺/impyridine@SiO₂/PP₃] activity decreased, and it was no longer recyclable. However, the homogeneous equivalent of [Fe²⁺/impyridine/PP₃] was completely inactive. Raman, FT/IR, and UV/Vis spectroscopy demonstrated that the reduced recyclability of [Fe²⁺/IGOPS/PP₃] and [Fe²⁺/impyridine@SiO₂/PP₃] nanohybrids is due to the reductive cleavage of their C-O-C bonds during catalysis. An alternative grafting procedure is proposed, applying here to the grafting of IPS, resulting in its higher stability. The accumulation of water derived from substrate's feeding causes the inhibition of catalysis. In the case of [Fe²⁺-imidazole@SiO₂] nanohybrids, simple washing and drying result in their re-activation, overcoming the water inhibition. Thus, the low-cost imidazole-based nanohybrids IGOPS and IPS are capable of forming [Fe²⁺/IGOPS/PP₃] and [Fe²⁺/IPS/PP₃] heterogeneous catalytic systems with high stability and performance for FA dehydrogenation.

Hydrogen Production from Formic Acid by In Situ Generated Ni/CdS Photocatalytic System under Visible Light Irradiation

Simple and practical noble-metal-free catalyzed hydrogen production from sustainable resources, such as renewable formic acid, is highly desirable. Herein, the development of an efficient photocatalytic hydrogen production from aqueous solution of formic acid using in situ generated Ni/CdS photocatalytic system was described. CdS-Cys (Cys=l-cysteine) quantum dots (QDs) acting as photocatalyst with Ni(OAc)₂ as H₂ production catalyst precursor, a 94 % yield was obtained within 5 h under visible light irradiation at 50 °C. The average rate of H₂ production reached up to 282 μmol mg^-1  h^-1 with 99.8 % H₂ selectivity. Mechanistic studies indicate cooperation of dynamic quenching and static quenching of CdS-Cys QDs by Ni(OAc)₂ . Especially, Ni⁰ , generated in the dynamic quenching, accelerated the electron transfer by acting as an electron outlet and enhancing the stability of CdS to slow down the photocorrosion distinctly, delivering efficient H₂ production with high selectivity. Our study will inspire exploration of various efficient non-noble-metal catalysts for practical H₂ production from bio-based formic acid.

Sterically and Electronically Flexible Pyridylidene Amine Dinitrogen Ligands at Palladium: Hemilabile cis/trans Coordination and Application in Dehydrogenation Catalysis

Ligand design is crucial for the development of new catalysts and materials with new properties. Herein, the synthesis and unique hemilabile coordination properties of new bis-pyridylidene amine (bis-PYE) ligands to palladium, and preliminary catalytic activity of these complexes in formic acid dehydrogenation are described. The synthetic pathway to form cationic complexes [Pd(bis-PYE)Cl(L)]X with a cis-coordinated N,N-bidentate bis-PYE ligand is flexible and provides access to a diversity of PdII complexes with different ancillary ligands (L=pyridine, DMAP, PPh3 , Cl, P(OMe)3 ). The 1 H NMR chemical shift of the trans-positioned PYE N-CH3 unit is identified as a convenient and diagnostic handle to probe the donor properties of these ancillary ligands and demonstrates the electronic flexibility of the PYE ligand sites. In the presence of a base, the originally cis-coordinated bis-PYE ligand adopts a N,N,N-tridentate coordination mode with the two PYE units in mutual trans position. This cis-trans isomerization is reverted in presence of an acid, demonstrating a unique structural and steric flexibility of the bis-PYE ligand at palladium in addition to its electronic adaptability. The palladium complexes are active in formic acid dehydrogenation to H2 and CO2 . The catalytic performance is directly dependent on the ligand bonding mode, the nature of the ancillary ligand, the counteranion, and additives. The most active system features a bidentate bis-PYE ligand, PPh3 as ancillary ligand and accomplishes turnover frequencies up to 525 h-1 in the first hour and turnover numbers of nearly 1000, which is the highest activity reported for palladium-based catalysts to date.

Base-Free Catalytic Hydrogen Production from Formic Acid Mediated by a Cubane-Type Mo3S4 Cluster Hydride

Formic acid (FA) dehydrogenation is an attractive process in the implementation of a hydrogen economy. To make this process greener and less costly, the interest nowadays is moving toward non-noble metal catalysts and additive-free protocols. Efficient protocols using earth abundant first row transition metals, mostly iron, have been developed, but other metals, such as molybdenum, remain practically unexplored. Herein, we present the transformation of FA to form H2 and CO2 through a cluster catalysis mechanism mediated by a cuboidal [Mo3S4H3(dmpe)3]+ hydride cluster in the absence of base or any other additive. Our catalyst has proved to be more active and selective than the other molybdenum compounds reported to date for this purpose. Kinetic studies, reaction monitoring, and isolation of the [Mo3S4(OCHO)3(dmpe)3]+ formate reaction intermediate, in combination with DFT calculations, have allowed us to formulate an unambiguous mechanism of FA dehydrogenation. Kinetic studies indicate that the reaction at temperatures up to 60 °C ends at the triformate complex and occurs in a single kinetic step, which can be interpreted in terms of statistical kinetics at the three metal centers. The process starts with the formation of a dihydrogen-bonded species with Mo-H···HOOCH bonds, detected by NMR techniques, followed by hydrogen release and formate coordination. Whereas this process is favored at temperatures up to 60 °C, the subsequent β-hydride elimination that allows for the CO2 release and closes the catalytic cycle is only completed at higher temperatures. The cycle also operates starting from the [Mo3S4(OCHO)3(dmpe)3]+ formate intermediate, again with preservation of the cluster integrity, which adds our proposal to the list of the infrequent cluster catalysis reaction mechanisms.

Amine-Functionalized Natural Halloysite Nanotubes Supported Metallic (Pd, Au, Ag) Nanoparticles and Their Catalytic Performance for Dehydrogenation of Formic Acid

In today’s age of resource scarcity, the low-cost development and utilization of renewable energy, e.g., hydrogen energy, have attracted much attention in the world. In this work, cheap natural halloysite nanotubes (HNTs) were modified with γ-aminopropyltriethoxysilane (APTES), and the functionalized HNTs were used as to support metal (Pd, Au, Ag) catalysts for dehydrogenation of formic acid (DFA). The supports and fabricated catalysts were characterized with ICP, FT-IR, XRD, XPS and TEM. The functional groups facilitate the anchoring of metal particles to the supports, which brings about the high dispersion of metallic particles in catalysts. The catalysts show high activity against DFA and exhibit selectivity of 100% toward H2 at room temperature or less. The interactions between active centers and supports were investigated by evaluation and comparison of the catalytic performances of Pd/NH2-HNTs, PdAg/NH2-HNTs and PdAu/NH2-HNTs for DFA.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Photochemical hydrogen production based on the HCOOH/CO2 cycle promoted by a pentanuclear cobalt complex

The first catalytic cycle for hydrogen production based on the photochemical two-electron reduction of carbon dioxide (CO₂) and the dehydrogenation of formic acid at ambient temperature was demonstrated using a pentanuclear cobalt complex (Co5). A series of mechanistic studies were performed to elucidate the mechanism responsible for the promotion of the photocatalytic cycle by Co5.

Recent Progress in Homogeneous Catalytic Dehydrogenation of Formic Acid

Recently, there has been a strong demand for technologies that use hydrogen as an energy carrier, instead of fossil fuels. Hence, new and effective hydrogen storage technologies are attracting increasing attention. Formic acid (FA) is considered an effective liquid chemical for hydrogen storage because it is easier to handle than solid or gaseous materials. This review presents recent advances in research into the development of homogeneous catalysts, primarily focusing on hydrogen generation by FA dehydrogenation. Notably, this review will aid in the development of useful catalysts, thereby accelerating the transition to a hydrogen-based society.

Hydrogenative Depolymerization of Silicon-modified Polyureas

Silicon-modified polyureas were depolymerized by hydrogenation in the presence of Ru and Mn catalysts. Yields of up to 84% of the aliphatic diamine and 81% of silicon-containing diamine were achieved...

Control of Catalyst Isomers Using an N-Phenyl-Substituted RN(CH2CH2PiPr2)2 Pincer Ligand in CO2 Hydrogenation and Formic Acid Dehydrogenation

A novel pincer ligand, ^iPrPN^PhP [PhN(CH₂CH₂PⁱPr₂)₂], which is an analogue of the versatile MACHO ligand, ^iPrPN^HP [HN(CH₂CH₂PⁱPr₂)₂], was synthesized and characterized. The ligand was coordinated to ruthenium, and a series of hydride-containing complexes were isolated and characterized by NMR and IR spectroscopies, as well as X-ray diffraction. Comparisons to previously published analogues ligated by ^iPrPN^HP and ^iPrPN^MeP [CH₃N(CH₂CH₂PⁱPr₂)₂] illustrate that there are large changes in the coordination chemistry that occur when the nitrogen substituent of the pincer ligand is altered. For example, ruthenium hydrides supported by the ^iPrPN^PhP ligand always form the syn isomer (where syn/anti refer to the relative orientation of the group on nitrogen and the hydride ligand on ruthenium), whereas complexes supported by ^iPrPN^HP form the anti isomer and complexes supported by ^iPrPN^MeP form a mixture of syn and anti isomers. We evaluated the impact of the nitrogen substituent of the pincer ligand in catalysis by comparing a series of ^iPrPN^RP (R = H, Me, Ph)-ligated ruthenium hydride complexes as catalysts for formic acid dehydrogenation and carbon dioxide (CO₂) hydrogenation to formate. The ^iPrPN^PhP-ligated species is the most active for formic acid dehydrogenation, and mechanistic studies suggest that this is likely because there are kinetic advantages for catalysts that operate via the syn isomer. In CO₂ hydrogenation, the ^iPrPN^PhP-ligated species is again the most active under our optimal conditions, and we report some of the highest turnover frequencies for homogeneous catalysts. Experimental and theoretical insights into the turnover-limiting step of catalysis provide a basis for the observed trends in catalytic activity. Additionally, the stability of our complexes enabled us to detect a previously unobserved autocatalytic effect involving the base that is added to drive the reaction. Overall, by modifying the nitrogen substituent on the MACHO ligand, we have developed highly active catalysts for formic acid dehydrogenation and CO₂ hydrogenation and also provided a framework for future catalyst development.

Recent Advances in Homogeneous/Heterogeneous Catalytic Hydrogenation and Dehydrogenation for Potential Liquid Organic Hydrogen Carrier (LOHC) Systems

Here, we review liquid organic hydrogen carriers (LOHCs) as a potential solution to the global warming problem due to the increased use of fossil fuels. Recently, hydrogen molecules have attracted attention as a sustainable energy carrier from renewable energy-rich regions to energy-deficient regions. The LOHC system is one a particularly promising hydrogen storage system in the “hydrogen economy”, and efficient hydrogen mass production that generates only benign byproducts can be applied in the industry. Therefore, this article presents hydrogenation and dehydrogenation, using homogeneous or heterogeneous catalysts, for several types of LOHCs, including formic acid/formaldehyde/ammonia, homocyclic compounds, nitrogen- and oxygen-containing compounds. In addition, it introduces LOHC system reactor types.

Metal-Ligand Cooperation in Cp*Ir-Pyridylpyrrole Complexes: Rational Design and Catalytic Activity in Formic Acid Dehydrogenation and CO2 Hydrogenation under Ambient Conditions

Interconversion between CO₂ + H₂ and FA/formate is the most promising strategy for the fixation of carbon dioxide and reversible hydrogen storage; however, FA dehydrogenation and CO₂ hydrogenation are usually studied separately using different catalysts for each reaction. This report describes of the catalysis of [Cp*Ir(N∧N)(X)]ⁿ⁺ (Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl; X = Cl, n = 0; X = H₂O, n = 1) bearing a proton-responsive N∧N pyridylpyrrole ligand for both reactions. Complex 2-H₂O catalyzes FA dehydrogenation at 90 °C with a TOF_max of 45 900 h^-1. Its catalysis is more active in aqueous solution than in neat solution under base-free conditions. These complexes also catalyze CO₂ hydrogenation in the presence of base to formate under atmospheric pressure (CO₂/H₂ = 0.05 MPa/0.05 MPa) at 25 °C with a TOF value of 4.5 h^-1 in aqueous solution and with a TOF value of 29 h^-1 in a methanol/H₂O mixture solvent. The possible mechanism is proposed by intermediate characterization and KIE experiments. The extraordinary activity of these complexes are mainly attributed to the metal-ligand cooperative effect of the the pyrrole group to accept a proton in the dehydrogenation of formic acid and assist cooperative heterolytic H-H bond cleavage in CO₂ hydrogenation.

Advances in Nonprecious Metal Homogeneously Catalyzed Formic Acid Dehydrogenation

Formic acid (FA) possesses a high volumetric concentration of H2 (53 g L−1). Moreover, it can be easily prepared, stored, and transported. Therefore, FA stands out as a potential liquid organic hydrogen carrier (LOHC), which allows storage and transportation of hydrogen in a safe way. The dehydrogenation to produce H2 and CO2 competes with its dehydration to give CO and H2O. For this reason, research on selective catalytic FA dehydrogenation has gained attention in recent years. Several examples of highly active homogenous catalysts based on precious metals effective for the selective dehydrogenation of FA have been reported. Among them are the binuclear iridium-bipyridine catalysts described by Fujita and Himeda et al. (TOF = 228,000 h−1) and the cationic species [IrClCp*(2,2′-bi-2-imidazoline)]Cl (TOF = 487,500 h−1). However, examples of catalytic systems effective for the solventless dehydrogenation of FA, which is of great interest since it allows to reduce the reaction volume and avoids the use of organic solvents that could damage the fuel cell, are scarce. In this context, the development of transition metal catalysts based on cheap and easily available nonprecious metals is a subject of great interest. This work contains a summary on the state of the art of catalytic dehydrogenation of FA in homogeneous phase, together with an account of the catalytic systems based on non-precious metals so far reported.

HCOOH disproportionation to MeOH promoted by molybdenum PNP complexes

Molybdenum(0) complexes with aliphatic aminophosphine pincer ligands have been prepared which are competent for the disproportionation of formic acid, thus representing the first example so far reported of non-noble metal species to catalytically promote such transformation. In general, formic acid disproportionation allows for an alternative access to methyl formate and methanol from renewable resources. MeOH selectivity up to 30% with a TON of 57 could be achieved while operating at atmospheric pressure. Selectivity (37%) and catalyst performance (TON = 69) could be further enhanced when the reaction was performed under hydrogen pressure (60 bars). A plausible mechanism based on experimental evidence is proposed.

Mo(0) complexes with aliphatic PNP-pincer ligands enable the first example of non-noble metal catalyzed formic acid disproportionation leading to methanol with a selectivity of up to 37% and a turnover number up to 69.

Deciphering the Mechanistic Details of Manganese-Catalyzed Formic Acid Dehydrogenation: Insights from DFT Calculations

A comprehensive density functional theory investigation has been carried out to unravel the complete mechanistic landscape of aqueous-phase formic acid dehydrogenation (FAD) catalyzed by a pyridyl-imidazoline-based Mn(I) catalyst [Mn(PY-^NHIM)(CO)₃Br], which was recently reported by Beller and co-workers. The computed free energy profiles show that for the production of a Mn-formate intermediate [Mn(HCO₂^-)], a stepwise mechanism is both kinetically and thermodynamically favorable compared to the concerted mechanism. This stepwise mechanism involves the dissociation of a Br^- ion from a Mn-bromide complex [Mn(Br)] to create a vacant site and coordination of water solvent to this vacant site, followed by the dissociative exchange of the aqua ligand with the formate ion to form Mn(HCO₂^-). Non-covalent interaction analysis revealed that the steric hindrance at the transition state is the cardinal reason for the preference to a stepwise mechanism. The β-hydride elimination process was estimated to be the rate-determining step with a barrier of 19.0 kcal/mol. This confirms the experimental observation. The generation of a dihydrogen-bound complex was found to occur through the protonation of Mn-hydride by a hydronium ion instead of formic acid. The mechanistic details and insights presented in this work would promote future catalytic designing and exploration of earth-abundant Mn-based catalytic systems for potential applications toward FAD.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

Synergistic Effect of Pendant N Moieties for Proton Shuttling in the Dehydrogenation of Formic Acid Catalyzed by Biomimetic IrIII Complexes

Formic acid (FA) is among the most promising hydrogen storage materials. The development of efficient catalysts for the dehydrogenation of FA via molecular-level control and precise tuning remains challenging. A series of biomimetic Ir complexes was developed for the efficient dehydrogenation of FA in an aqueous solution without base addition. A high turnover frequency of 46510 h^-1 was achieved at 90 °C in 1 m FA solution with complex 1 bearing pendant pyridine. Experimental and mechanistic studies revealed that the integrated pendant pyridine and pyrazole moieties of complex 1 could act as proton relay and facilitate proton shuttling in the outer coordination sphere. This study provides a new strategy to control proton transfer accurately and a new principle for the design of efficient catalysts for FA dehydrogenation.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Cobalt-Polypyrrole/Melamine-Derived Co-N@NC Catalysts for Efficient Base-Free Formic Acid Dehydrogenation and Formylation of Quinolines through Transfer Hydrogenation

It is highly desired but remains a great challenge to develop non-noble metal heterogeneous catalysts to supersede noble metal catalysts for formic acid (FA) dehydrogenation and the corresponding transfer hydrogenation reactions. Herein, we developed a simple and feasible melamine-assisted pyrolysis strategy for the preparation of atomic cobalt-nitrogen (Co-N)-anchored mesoporous carbon with high metal loading (>6.8 wt %) and high specific surface area (750 m² g^-1). Systematic investigation reveals that both the organic carbon source polypyrrole and the nitrogen source melamine are crucial for the successful generation of such Co-N-based materials. The obtained samples (Co-N)_n@NC were demonstrated to be highly efficient and robust catalysts for FA dehydrogenation and formylation of quinolines through transfer hydrogenation, exhibiting a very high hydrogen production rate of 16 451 mL·g_Co^-1·h^-1 for FA dehydrogenation and affording excellent yields (up to 99%), selectivity (up to 98%), and stability for transfer hydrogenation. This work may provide a promising route for the fabrication of more low-cost metal-nitrogen catalysts for green fine chemical synthesis.

Catalytic oxidations by dehydrogenation of alkanes, alcohols and amines with defined (non)-noble metal pincer complexes

The present review highlights the latest developments in the field of transition metal-catalysed oxidations, in particular C–C–, C–O– and C–N-bond dehydrogenations.

Manganese(i) κ2-NN complex-catalyzed formic acid dehydrogenation

This work updates the first non-phosphine-based Mn complex able to perform the formic acid dehydrogenation (FA DH) in the presence of amines. Significant improvements were achieved regarding TON (>7500), gas evolution (>20 L), and lower CO content.

Bio-mimetic self-assembled computationally designed catalysts of Mo and W for hydrogenation of CO2/dehydrogenation of HCOOH inspired by the active site of formate dehydrogenase

Density functional theory modelling has been used to design Mo and W-based catalysts MoIII(tBu)(CO) and WIII(tBu)(CO) for CO2 hydrogenation and HCOOH dehydrogenation, which are bio-mimics of the active site of formate dehydrogenase. Based on DFT calculations, the molybdenum and tungsten based complexes are good catalysts in the +3 oxidation state for CO2 hydrogenation with free energies of 24.03 and 21.31 kcal mol-1, respectively. Such a low barrier indicates that our newly designed Mo and W-based complexes are very efficient for CO2 hydrogenation or HCOOH dehydrogenation catalysis. Overall, our computational results provide in depth insights that can serve as a great tool for the design and development of new and efficient molybdenum and tungsten based catalysts for CO2 hydrogenation or HCOOH dehydrogenation.